Filter error to dissolve example

Similar Questions

• Filter error problem

  Is there an estimate as to when the "Filter error" problem will be solved for Sierra 10.12?

  Hi greyparrot,

  Please use the workaround provided in the support article until 10,12 drivers are available.

• Error 50400 FlexRIO example "Coprocessor FFT"

  As the title says, I have tried to run the example "FFT co-processor" located in LabVIEW 2013 FlexRIO PXI-7954R FPGA with examples but kept "ERROR-50400 occurred to the Invoke method: FIFO.» Write in TNI .vi co-processor (host). Possible reasons: the transfer has not completed within the time or in the specific number of retries. ».

  I use LabVIEW 2013 SP1 with Xilinx 14.4 of the compiler. I didn't modify the code except copied the FPGA vi to the PXI-7954R target newly added and recompiled; and change the FPGA VI reference in the host vi as a result.

  I tested the code in simulation mode (i.e., run VI FPGA on development with simulated IO computer) and it worked fine. However, when running on the target FPGA it does not work. I followed the 'empty remaining items' on "host-to - FPGA.Write" at the host vi and the value was 5. And "other" in "FPGA-to - Host.Read" in the host vi is 0.

  It has something to do with the FIFO buffer size? Suggestions or comments are greatly appreciated.

  Thank you

  Bing

  Theres a race condition in the code of the host. If you try to read before you write, then the FIFO is to expire. If you make sure that you write before you read while the timeout never occurs.

  Attached is a version of the host code that writes then reads using a state machine.

• Error getting started example 1 cRIO MDK

  Hello

  I have a problem with my MDK for the cRIO (April 2009).

  I am connected to a 9074 with a 9263 to location 1.

  In the manual page 5-6 o is a description of example 1. I opened the example and connected to the cRIO. (Screenshot60)

  When I tried to launch the example I got an error message. (Screenshot57)

  What I've done wrong?

  Sven

  Ok

  I have soved the problem.

  The examples are for 9101 Chassis und I used a 9074.

  Now, I have copied the single VI in a new project, fixed nodes and it worked.

  Sven

• 2 error while finding examples

  Whenever I try to go to 'Help-> examples find' on my copy of labview 8.5 running on Windows XP SP3, I get the error in the screenshot.  I have no GPIB devices, the error remains after a re-start with labview to be the only program running.

  It's not a huge deal, but it would be nice if the browser of the example worked at home.  No problems with it at work.

  Any suggestions?
  Thank you!

  Tardi Cam

  Your error message provides the (Exec System) function and the full path to the exe file, it tries to run. Have you looked for the file? Have you tried to use the system exec to do the same thing?

• Filter error message

  I'm having a problem with a filter of bad stray bullet going tell cf > 0.5 fs or something similar thing he put up before for other people and they said the rate of sampleing and set it as the dt for the wave while I built a wave with that than the dt, but I get the same error message? I can't solve this problem all old messages of the forum I went on, im using a wizard daq but I download a file of reading with attached data and data acquisition is playback of 10,000 samples at a rate of 1000.

  Thanks for your time.

  The Nyquist criterion is a strict inequality. Setting the samping to 22001 rate should get rid of the error.  In fact my version purified to the top of your VI will take place without generating this error to 22000.  Interesting! When I look at the CF says error message<=>

  The number of samples that you read both has nothing to do with the error.

  You have an oscilloscope to look at the waveform with a higher samping? With a scope, you can be able to get a much better idea of what the higher frequency components are the original signal.

  Lynn

• Error in IdentityService example

  I use the example of IdentityService on a Simulator: BlackBerry 10 SDK native 10.2.0.1791 and I get an error dialog box when entering 50017 error in onAllData () Signal of profiles.  The section ID is populated by very well, but the profile section is not.  I tried to add a property and get the same error 50017.

  Any help would be appreciated.

  Hello

  Development has confirmed, in 10.2.0 off this feature is deliberately in the Simulator.

  They indicated that it should work in 10.2.1.

  Thank you.

• OBIEE 11g in filter error

  Hello
  
  I have a problem in OBIEE 11.1.1.6
  
  I have a report where project is a filter that is, in which the condition.
  
  Now, I have a project not as ' ERP - HR STD and 2012. " Now this is not error getting data on. In OBIEE, whenever she see any & sign in the project number filter, it returns error. Now when I run the sql (obtaining of the journal nqsquery) query in PL/SQL developer or Toad, I get the correct result, data display.
  
  If some & or % sign appears in the filter data, OBI could not able to execute the query
  
  Help, please.
  
  Thank you
  
  Titas

  Hello

  You can use the function replace as -.
  Replace (ANY_CHAR, Exp1, EXP2)
  For ex-replace(column,'/','a')
  Result - Hello / hello
  at helloahello

  Hope this helped / replied

  Concerning
  Young

• ADF Table filter error search "ADF_FACES - 60096:Server"

  Dear all,
  When I search for filter Table I am facing the following Error.Please help me how to deal as well as useful links to blog. I'm moving my project 11.1.2.0.0 for JDeveloper 11.1.2.1.0 JDeveloper. In JDeveloper 11.1.2.0.0 I did not submit this error message.
  
  java.lang.NullPointerException
  
  ADF_FACES-60097: for more information, see the error log of the server for an entry beginning with: ADF_FACES - Exception during the PPR, #5 60096:Server
  
  
  Concerning
  KT

  Hi John,.

  When I change Capital 'C' small 'c' filterFeatures value, my use case has been resolved.

  Before change

  filterFeatures = "CaseInsensitive.

  After change

  filterFeatures = "caseInsensitive.

• 32 bit dissolve example does not (not displaying proxies do not, fails)

  Hello

  We just released a 64-bit Mac (cocoa) of our plugin version, which goes well.  But we have had requests for a 32-bit version, for use with PS Elements (versions 10/09/11).

  Xcode, I duplicated the current goal, worth 32-bit architecture.  The 32-bit plugin compiles (after commenting on a statement from ShowVersionAlert to DialogUtilities.h), but when running it in PSE 9 it does not display the proxies and PSE crashes randomly (by exiting the application, etc.).  PES 11 does not proxies, but does not seem to hang (trial was brief).

  So I tried to compile the 32-bit version for example dissolve, and I get the same problems.

  Is the SDK CS6 none liked compatible with PSE?  Is a 32-bit plugin must use carbon?

  What Miss me?

  Thank you

  Jamie

  4.6 Xcode

  OS X - Mountain Lion

  CS6 SDK

  OK, I solved after I found this post:

  http://forums.Adobe.com/message/3700610#3700610

  I had looked in the file of Betty and seen the code:

  / * If your plugin... etc.

  */

  off for now this plugin has no {Objective-C Cocoa,

  But I don't see or realize that he needed '(cocoa).

  Change to this fixed:

  / * If your plugin... etc.

  */

  Cocoa (),

• Filter error

  Hello
  
  I have the script below:
  
  report 1:
  
  product_count region
  
  AAA 1
  BBB 2
  CCC 5
  
  
  report 2 - is the zoom that have detailed information of the corresponding product
  
  Ideally, when the user clicks the value 2 in the column product_count, zoom the report should give only 2 documents.
  
  a filter condition is given in two reports: product_status = New
  Region and Product_count is given is requested in the report 1 [main], as well as the report 2 [zoom]
  
  But I got the following error:
  
  I m instead of 2 folders with the NEW State, invite the records with the status else also, which is not necessary in my report.
  
  How to get only the required records?
  Please give me some advice on this issue.
  Thank you.

  Hi Thomas,

  First in the first report is the records for the NEW status go check out them.
  Instead of on County can you add the product name to the first report and add is invited on the name of the product and navigate on it so that the details of the product would come in the detailed report.

  (OR) you see if we product_count're invited and filter = NEW and do not add filters in the second report is even not invited...
  I suppose that you add on the navigation product on the value count.
  Courtesy Gérard:-http://gerardnico.com/wiki/dat/obiee/olap_operation#with_the_navigate_value_interaction_of_a_column

  You're in good position, lets give this a try.

  See you soon,.
  KK

  Edited by: Kranthi.K may 4, 2011 03:13

• File filter errors in the batch file

  Hi all.

  I can't filter element in the home folder of batch file.

  File is very long number.

  

  When you use the batch file filter item. Filter by folder

  

  Filter file is intger but real record is long.

  Thanks for your suggestions.

  Hoan

  Hi Hoan,

  Bug 17919457 : MANAGER of REPO THROWS WARNING WHEN RECORDS DCOLLECTIONID EXCEEDS the ENTIRE VALUE of MAX

  Try searching for it in support of oracle. You will get the solution to your problem.

  -Prashant

• Problem in ANSI C for example - error TDMS-ContAcq-IntClk 200877

  Hello

  I tried the examples in the 'ANSI C examples' folder and ran into a snag with the example in:

  "" \DAQmx ANSI C\Analog In\Measure Voltage\Acq TDMS-Cont-Int Clk".

  When I run it as it is, I get the following error:

  DAQmx error: requested each interval of N samples event is not supported for the given the mechanism of transfer of data and the buffer size. To keep the DMA or USB in bulk as the data transfer mechanism, change the size of the buffer or the interval of event Every N samples so the size of the buffer is a multipleof even interval event Every N samples. To keep the same each event interval of N samples and the size of the buffer, modify the mechanism for transfer of data interruptions if taken in charge. Property: DAQmx_Every N samples CQI event IntervalRequested value buffer: size 1000Buffer: 12288Task name: _unnamedTask<0>State :-200877End of the program Code, press the Enter key to exit
  
  

  As I was typing this, I did a quick test. I tried to comment this line in the code:

  / / *	/ / PDM DAQmx Configure Code	/ * /	DAQmxErrChk (DAQmxConfigureLogging(taskHandle,"C:\\example.tdms",DAQmx_Val_LogAndRead,"GroupName",DAQmx_Val_OpenOrCreate));)
  

  and it worked, as I suspected.

  My gut feeling is that the DAQmxConfigureLogging function expects a block of 12 288 bytes, and in the rest of the code, the number of samples is set to 1000, with a sampling frequency of 10000.

  In any case, I fixed it by changing from 1000 to 1024 (1024 because * 12 = 12288) anywhere in the code, so solve the original problem.

  I don't have a few new questions now:

  1. is this an error in the example, or am I missing something?

  2. How do you change the default size 12288 DAQmxConfigureLogging() waiting for let say 5000?

  Thank you.

  Hall

  Hey Bob,

  In fact, it is a bug with this example.  It comes with the value 1000 for the wrong sampling interval since it is an example of logging.  When logging is enabled on a task, default buffer sizes are slightly different from the default values without connecting.  This is because the default buffer sizes are powers of 10, while hard drives prefer to powers of 2.  It is a maneuver of performance as we listen to disc directly from the buffer DAQmx.

  I think you should be able to use 1024 as your sampling instead of 1000 interval in this example.  In this example, the default value will change so that it is not immediately error (Corrective Action Request #177199).

• management of errors with example

  Hello
  
  Can anyone explain it please
  
  1. why we need to create XSD,
  
  2. What is the use of dehydration,
  
  3 types of XML
  
  Please explain any error handling for example.

  Hi '.

  1. why we need to create XSD,

  It is used as input/output for the webservice/BPEL

  2. What is the use of dehydration,
  This is used to save the State of the composite/BPEL/mediator in the database

  3 types of XML

  simple complex

  Error in the file handling
  http://yatanveersingh.blogspot.com/2011/09/fault-handling-in-file-adapter-for-CSV.html

  Yatan-

• The Microsoft/Windows Update errors and updates failed.

  I just had to make YET ANOTHER Destructive full restore my win Vista PC, regular and continuous errors and problems caused by who knows what and the fact that the system restore never worked once in 10 years of friggin! My PC tries to run Win' Vista (SP2) and all the new updates that are applied after SP2. I also run Norton Internet Security (fully updated). I would like to re - install Office 2007 again once more, but I'm reluctant to until I get an answer to the following problem, because whenever I have re-installed Office 2007 I get Office update errors as well. I do not yet have enough away with this recovery to even think about re - install "other apps" again. My problem is that a heck of a lot more than several updates that were 'available' over time since I bought this pc (which didn't even have SP1 on it when I bought it new), do not have more than several times. Finally, it seems that these updates failed stop appearing as 'available '. Currently failed updates are: IMPORTANT: KB974468; KB2729449; KB2742595; RECOMMENDED: Windows Live Essentails 2001. OPTIONAL: Bing Office 1.3.1. also failed (the current version is 1.3.3...).

  My concern about all these multiple failed updates is that if these updates ARE important, whereas they should, and at the very least, not failed to install the first time which must be installed with success the next time. There are at least 40 + other these updates on my pc (of all types) who failed the first time, but succeeded (according to Windows Update), the second time. After doing a search and try to install these updates above manually from the Microsoft Download Center, I got a response that these updates "are not" or "are blocked by another condition on my computer. What 'State' is probably I wonder? Makes me think anyone or whatever decide an update IS important for a particular system is wrong either (and the update is NOT important at all) and so it does not yet appear in the list of "update available", or it IS important and there is another unknown or error "NO that does NOT exist. preventing the update to be applied. I say no because maybe this unknown error also cites a number of error that is not found by the completely useless online "windows help and support!

  If an update is NOT or is no LONGER available, then why hell is he always recommended! ??? In all cases, "Windows Live Essentials 2011" settles, and looking for 'help' by selecting "get help with this error" I am taken to the "windows help and support" line (which doesn't help at all). That's because this 'aid' shows only 26 'results' and NONE of them include error numbers (800706... and two instances of 66A) city. ANY help will be VERY much appreciated (epecially on the part of MVP, who have been a great help in the past) cordially Andy Bob :) :) :) :)

  Let's start from the beginning.

  Lets first see what happened with your drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  change c:\bootex.log

   
  What is this file exist with something in it?
   
  The following commands query the event logs.
   
  To start verification by using the name of the source for any version of Windows (because it varies).
   

  WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "Autocheck" or sourcename = 'Winlogon' or sourcename = "WinInit") get format:HForm

   
  To run chkdsk in Windows.
   

  WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "Chkdsk") to / format: HForm

   
  For warnings about disk problems detected during normal operations and automatic repairs by Windows at the time where the problems were discovered.

   

  WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "NTFS" or Sourcename = 'Disc') to / format: HForm

   
  Then to view the created file.
   

  Start "" "% userprofile%\desktop\DiskEvents.html"

   

  Copy and paste it here. Again run the commands again after doing the below.

  Then to test the equipment.

  Standard hardware troubleshooting
   
   
  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.
   
  SFC
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  sfc/scannow
   
  Heat
  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.
   
  For memory diagnostic results
  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   
  Double-click the entry for more details on this entry.
  
  For results of Chkdsk
   
  You can ignore this if you performed the first series of commands again.
   
  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 50 , and the Source is disk
  Look for EventID is 51 and Source disk
  Look for EventID is 52 and Source disk
  
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID is 134 and Source is NTFS
  Look for EventID is 137 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
  Look for EventID 26213 and Source is Chkdsk
  
  Look for EventID 26214 and Source is Chkdsk
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  If the results are transferred to the startup time events logs chkdsk, then the results are probably in the following file c:\Bootex.log. This file is removed when the results are placed in the event logs.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

   

   

  You say that you have had continuous problems. But if you want to jump the gun to fire a bit.

   

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

   

  Windows errors (smallish numbers) and COM HRESULT values (in general, but with exceptions, start with an 8 as 0 x 80040154) are defined in WinError.h, except 8007nnnn where you are looking for the error Window number it contains.

   

  As a general rule, Windows errors are less than 65 535 (0xFFFF). Errors from 0 x 80000001 are HResults Component Object Model (COM). Errors from 0 xC0000001 NTStatus results.

   

  NTStatus errors (usually, but not always to start with a C as 0xC0000022) are defined in NTStatus.h.

   

  the .h files are the best source because it includes the symbolic name of the error that can give clues such as the source of the error
  . FormatMessage does not have the symbolic name as the description.
   
  You get these files by downloading the kit of Development Platform (that's gigabytes)
  http://www.Microsoft.com/en-US/Download/details.aspx%3Fid%3D8279&SA=U&EI=w2IrULDDLsHFmAWbmIHoBg&ved=0CBwQFjAA&USG=AFQjCNHZn9-4f2NnuN9o3UWUsOF3wL7HBQ
   
  If you just want the two files I have them on my skydrive so I can reference anywhere I want.
  https://SkyDrive.live.com/redir?RESID=E2F0CE17A268A4FA! 121
   

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  Esentutl.exe /p c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

   
   

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.

   

  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.

  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Safe mode

  If the above does not help. Windows Update does not work in safe mode.

  Use safe mode with Networking if you need internet access.

  Click Start - all programs - Accessories - run and type
   

  msconfig
  

   
  Go to the Startup tab, and then click Start secure (also check network if necessary). Reset. Come back here and uncheck the box secure start to return to normal mode.
   
  or
   
  If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support]
   
   

  Determine the Version of Windows Installer

  Windows Vista comes with version 4. Version 4.5 is available for download. To determine the version,

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  msiexec

  If you have Version 4.5 try reinstalling from

  http://www.Microsoft.com/en-AU/Download/details.aspx?ID=8483

  If you have Version 4 continue with the other steps below.

  Reregister Windows install

  That you re-register Windows Installer.

  Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type

  
  regsvr32 c:\Windows\System32\msi.dll
  regsvr32 c:\Windows\System32\msihnd.dll
  regsvr32 c:\Windows\System32\msimtf.dll
  regsvr32 c:\Windows\System32\msisip.dll

  msiexec/reg
  

   

  FixIt

  Microsoft has a range of automatic programs to solve common problems. To see Windows Installer problems

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

   

  Reinstall the Services registry entries

  Download MsiServer_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the MsiServer_Vista_32.reg.
   
  Reset
   
   

  Restart the Service and dependent services

   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator.
   

  SC start DCOMLaunch

  SC start RpcSs

  Start msiserver sc config = request

  SC start msiserver

   
   
  .
  --