Filter in the analysis of OBIEE problem

Similar Questions

• In the analysis of noise problem

  Hello

  I see now a BiQuad filter two steps and I want to know the noise in the axis of the output "out". However, the analysis of noise gives me nothing, but just a black background without any digit or number. What would be the problem? Thank you very much!

  Better compliance

  Billy

  Hi Billy,

  It's a problem of DC convergence in the simulation. In the scan options, select use custom settings.

  

  On the Global tab, the value of the Shunt resistance of analog nodes on the ground [RSHUNT] 1e + 008

  

  On the DC tab, set the iteration DC [ITL1] limit on 400

  

  Then simulate again and now you can see that they are all posted!

  

  

  Hope this helps!  :-)

  Kind regards

• The analyses show no problems, but challenges remain

  My system is MS XP with SP3 and all updates available which I am aware. Browser is IE8, even with all available updates. I'm reasonably sure that my system is somehow infected by 'something'. I get intermittent audio not permitted that usually looks like television commercials. Sometimes as a soundtrack of SciFi. I do not see often, momentary (two seconds, or less) messages on the program have to close, but he never does. The audio is often heard when no program (other than the startup items)... runs no programs including the browser. When you use the browser, it will become occasionally 'not selected' (I don't know how to call it that... the intense blue bar at the top of the page becomes mute). I used the MS Security Scanner to scan the whole system (not the quick scan) and the parser reports no problems found. I also scanned the whole system (not the quick scan) using Malwarebytes Anti-Malware software and reports of software, found nothing. I used Kaspersky TDSSKiller to search for rootkits and that the software reports that nothing found. I've used Spybot to scan the entire system and he always finds some elements (of course), but when they "killed", no improvement is made. I've "cleaned" system using CCleaner, but with no obvious improvement to the problem. I scanned the whole system using my AVG anti-virus software. He reported no problems found. All of these software have been updated to the current date. The symptoms persist. There are other techniques that I use to find the problem? TIA for any assistance that may be offered.

  Although it was good, AVG is so over one of the best available antivirus programs. You may want to consider an alternative (excellent free AV programs include Avira, Avast and MSE). If you decide to, you must first run AVG Remover:

  http://www.Avg.com/us-en/utilities
  Looks like you have not used that a rootkit program scan. In addition, it seems that you have not scanned with any live CD.
  I think the first thing for you to do is to scan with the standalone aswMBR program (making sure to download the latest Avast definintions when offered the chance):
  http://public.avast.com/~Gmerek/aswMBR.htm
  Useful links more:
  http://www.techmixer.com/free-bootable-antivirus-rescue-CDs-download-list/
  http://www.livecdlist.com/purpose/Windows-antivirus
  http://www.Raymond.CC/blog/13-antivirus-rescue-CDs-software-compared-in-search-for-the-best-rescue-disk/

• lov (list of values) on the analysis in OBIEE filter option

  Dear OBIEE users,

  Kindly help me.

  Our users of analysis, applying the filter, click on general

  

  strikes at our 5 done row Bn collect distinct values and therefore blocks the bandwidth network.

  Then give me suggestions on the improvement of the performance?

  I have options

  1. I can remove the option. (- Not a good idea to hide the feature)

  Please guide me how/where to do?

  2. I can provide tables/views LOV (cached) to get distinct values that will be added under table separate dim (1 col) that are attached to did the same collar and finally, expose the LOV table instead of the column column. (- Not a good idea as again once, we need to hit the very fact not used and above all, there is a JOIN that is not obviously useless for whole system.)

  3. as you invite, if the default option is available, Please tell me

  4. suggest me the best way if Oracle provided ha / you've used.

  Thank you

  Dilip Kumar Mohapatro

  I expect to get

  

• missing lines on the site of obiee answers

  Hello gurus

  I need help...

  I have a small data model. I have deployed to production, but it seems when I create analysis and the results it receives all the lines.

  For example, when I query the database table, it shows that 50 lines but when I create through the analysis of obiee it shows only a few lines.

  What can I do? If you need any information to undestand more info on my problem, I'll write as soon as POSSIBLE

  The problem is resolved. Problem was the physical properties of the data...

  I hit question DBMS features tab and its all is ok now

• Get the error code: 0 x 80041003 in Event Viewer. Events cannot be delivered through this filter until the problem is resolved

  Original title: - what the heck is - this?

  Can someone tell me what this means - in English?

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I get this topic once per hour in my diary of events 'Application '.  The Source is: Microsoft-Windows-WMI and the event number is: 10

  Every word is understandable and I know what they mean, but how they are threaded and beat me to the syntax.

  Bill

  Thanks for the reply, Gerry.  I'm no stranger to computer, having started in 1962 in the Navy for 20 years.  The HD is fine.  I used the Hitachi software testing to verify this.  RAM is also fine after running MEMTest for about 17 hours.  CHKDSK shows up at all no error.

  I agree it could be caused by a hardware fault and looking for that I ran some tension and trials of O-scope on the motherboard.  The only discrepancy I found was Aida64 Pro told me that the 3.3V rail was only 1.75 v.  My DS was told that the rail was 3.327.  This led to the conclusion that maybe the sensor was messed up.  I have an almost identical computer with a motherboard in the same series and Aida reports that rail even as 3.319v.  So, I think that the motherboard may be offset slightly.

  The re - install is an easier way to remove a large number of applications I just didn't need more and had not touched in over a year.  Revo even would have struggled to clear the registry after such massive uninstall.

  I found that the results from a command prompt is quite easy if you issue the command once, read the results on the screen, and then do it again but to redirect the output to a text file ("' do_whatever > test_output.txt '").  All you have to do is cop0y and paste a post.

  This re - install and the subsequent installation of SP2, seems to have solved the error of the event: for now.

  Bill

• -Event ID: 10 error 0 x 80041003. Events cannot be delivered through this filter until the problem is corrected. »

  Title: event id 10 original

  my PC (Vista Home premium SP2, 2 GB of Ram) is suddenly restart and get a blue screen. What can I do to fix this error? It is after 2 weeks after reinstalling windows.

  Here is the error message:

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be

  sent through the filter until the problem is resolved.

  -

  -

  10

  0

  2

  0

  0

  0 x 80000000000000

  2365

  Application

  Lory-PC

  -

  ./root/CIMV2

  SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99

  0 x 80041003

  Hello

  1. Faced with this issue specific request?

  Try the methods provided below and check if the problem persists.

  Method 1:

  This problem occurs if the WMI filter is accessible without the necessary permissions.

  To resolve this problem, run a script to stop the event ID 10 messages.

  You can check the link below to solve the problem.

  10 the event ID is logged in the application log after you install Windows Vista Service Pack 1 or Windows Server 2008

  http://support.Microsoft.com/kb/950375

  Method 2:

  You can try to perform a startup repair if the system still hangs after trying this article.

  Startup Repair will try to repair startup issues in Windows Vista. To run the Startup Repair tool, follow these steps:

  (a) Insert the Windows Vista DVD into the DVD drive, and then restart your computer from the DVD.

  Note

  When you receive the prompt press any key to boot from the CD or DVD, press any key on the keyboard to restart your computer by using the Windows Vista DVD.

  (b) select your language setting, and then click Next.

  (c) select repair your computer.

  (d) select the installation of Windows Vista to be repaired, and then click Next.

  (e) under System Recovery Options, select the Startup Repair tool, and then press ENTER.

   

  Note

  If the repair process detects a problem starting in Windows Vista, it will run Startup Repair to automatically fix problems. If this happens, click Cancel, and then click view the advanced management and system recovery.

  (f) click Finish when the Startup Repair tool is completed.

  (g) under System Recovery Options, click on restart.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 3:

  I also suggest you to run memory diagnostic tool to check if the RAM is good.

  To run the Windows Memory Diagnostic tool

  (a) click Start, click programs principally made and then expand accessories.

  (b) right click on command prompt and select run high on the shortcut menu.

  (c) at the command prompt, type mdsched.exe. If you are prompted, allow the action. You can choose to restart the computer and run the tool immediately or schedule the tool to run at the next reboot.

  (d) the Windows Memory Diagnostic runs automatically after the computer restarts. Windows Memory Diagnostic allows you to choose among three suites of tests of varying rigour.

• How to identify all the analyses using a filter based on the findings of another analysis

  How can I identify all analyses in the catalogue that contains a filter based on the results of the analysis another? Due to limitations on TimesTen, we remove all instances of the filter based on another feature of analysis completely.

  Christian Berg says:

  do research on the physical files in the file system

  A quick test, I guess you want to get the assuming you are on Linux, grep would be:

  oracle@demo:SampleAppWebcat () $ grep --files-with-matches --recursive '
  From there, you can identify the relevant analyses.
  		   

• Security: how to cancel 'save the analysis' obiee 11g?

  Hello world
  
  have not worked with the 11g version yet, I have to help a colleague.
  Aim: user who can do ad hoc analysis but is unable to save them.
  Can someone explain how I can revoke the privilege 'save the analysis' responses? Can not find, and I want to not meddle with the standard groups and permissions.
  
  
  That's what I did:
  -created user with 'bi writers' group
  -J' created a group 'bi authors without memory' with the option ' create as.
  
  Then I have 2 problems:
  1 al ' webcatalogs, the new group does not show
  2. I have not found the option to cancel registration in to 'manage privileges' screen.
  
  Thanx
  Sandra

  Hi Sandra,.

  they save the reports in my files or folders?

  We can restrict access to the answers/analysis directly from the Administration--> privileges to manage

  Thank you
  Saichand.v

• problem with the one of the objects to OBIEE

  Hello
  I have a question for you. I use OBIEE version 10.1.3.4.
  
  What are the cases you've seen related to changing the name of indicators or presentation table?
  
  I have a flag called "Recipes" in the presentation Table 'Revenue KPI'.
  
  This indicator is called in a report.
  
  What happens to the report if I rename the indicator or move the indicator to another table of presentation or rename the presentation Table?
  Alias always works?
  
  Do you have tips on how to maintain consistency between what is in the presentation of the RPD and what is used in reports and dashboard?
  
  
  When I change the name of a report included in a dasbhoard dashboard does not recognize the new name.
  Any suggestions?
  
  Thank you.
  
  Sara

  Hi Sara,.

  I just wanted to throw my 2 cents in here too. I agree with what everyone else said so far. I just wanted to mention a recovery method where you start to encounter some issues with too many links are broken between areas/presentation tables/columns object and your report. In this case, you can always open your Catalog Manager tool, navigate to this report and open it is XML. The XML contains all the original names of the columns, tables, and fields. In the worst scenarios, if you have an application that has a lot of mistakes, you can correct manually it is XML for re - sync with the correct names.

  That being said, wouldn't it been nice if these things have an internal ID and not all this kludgy 'alias' strategy depended (someone please tell me this is remedied in 11g).

  The other thing to remember is that when you rename an application or dashboard, ALWAYS use the function rename the chip in Catalog Manager. This intelligent feature resolves all references to the names of catalog objects. So if you have 5 pages of dashboard that sail the same report in detail, and you think you want to change the name of the report in detail, and then use the function rename the smart and OBIEE will automatically fix the references in 5 dashboard pages.

  Best regards

  -Joe

• Low-pass filter before the NI 5112

  Hello

  I currently use a 5112 AND measure the signal of an infrared detector in an experience of ring to the bottom of the cavity. Below are three examples of signals. My main question is how I can implement a low pass filter, passive preference, before my 5112 OR undistorted extremely my signal due to the impedance mismatch. Now a few details:

  

  

  

  Some unique captures for each wavelength are shown in color, while average 25 pulses appears offset in black. The range and offset are chosen in each case in order to minimize the noise of "scanning". In the case of 3.14um, the noise that you see is about 25 times noise from scanning. They were taken without the limitation of BW and 100 ms/s mode.

  The detector (Vigo MIPDC-F-10) has a bandwidth of 10 MHz. I think it is a low impedance and is intended to be harnessed with 50Ohms, however its documentation confuses me, and I'm waiting for a definitive answer from the provider. 2.4 part of the manual says 50Ohms recommended, however the Datasheet and our map calibration (below) seem to suggest 1 MOhm is recommended!

  

  There are a few strange oscillations with a period of almost 180ns in our signal that I thought were due to the impedance mismatch existed in the system before I changed it:

  -Detector

  -1 metre 50 Ohm SMC Cable BNC (RG-174)

  -Inline BNC connector

  -meter 5, 75 Ohm BNC to BNC cable

  -Digitizer, DC, no BW limit, 100 ms/s, 1MOhm | 30pF

  When I saw this configuration, I knew something wasn't right and I even he modeled in LTSpice and he showed the same period of oscillations. But now, the Setup is:

  -Detector

  -1 metre 50 Ohm SMC Cable BNC (RG-174)

  -BW digitizer, DC, limit, 100 ms/s, 50 Ohm

  And we still have oscillations, even if the period seems to have changed to 320ns all about. These oscillations, which remain are 99%, probably due to our drop-down ring cavity experiment, however if anyone has recommendations on possible causes or ways I can confirm it is not because of my chain of detection they would be more than welcome!

  Now, the main question. Between the 50 Ohm 1 meter cable and the scanner I would insert a low pass filter. The BW limit has helped reduce the noise, but it can certainly still be further reduced without any lose to our signal. That's because we cut the beginning of the signal and then measure just the the decay time, which is relatively long and smooth (1 to 2 times 1/e US). Thus, in the future I may even want to try to eliminate the oscillations 320ns, but I'm afraid that this much filtering will distort the signal too. Therefore, for the immediate future I'm just looking to 'replace' the filter BW 20 MHz, with something like 1 or 5 MHz.

  Of course, I would disable the BW limit on the digitizer to avoid additional confusion, but nevertheless, I'm not sure how to approach the problem. Usually I do a lot of research and try different solutions. However, I don't have access to all components to this work, so everything should be ordered, and I don't have a lot of time to experiment. Ferrites seem like a possible solution, however not sure how effective they are at this low frequency or the way they work with coaxial cables. I know that the filter passes low RC base, but the 50Ohms (or 1MOhm | 30 pF if I change it) seem to make it impossible. I guess an op-amp based one might work, however the large input impedance is the impedance of coaxial cable... etc...

  All of the recommendations of the technique or red resources wort would be welcome. Thanks for your time.

  A possible way to separate your artifacts electric and the cavity is relatively simple.  You take the data at three wavelengths.  For each of them, make a simple exponential decay (for example exponential Fit.vi) adjustment to your data, then subtract this signal.  You should have something that oscillates on an average.  Compare the residual signals for all three wavelengths, either visually or with something like a power spectrum.  Anything in the three is probably the electronic (and you could possibly model and subtract it rather than trying to eliminate it).  This could break if the rise time of the signals are different, because that will include elements of different frequency.

  I am not convinced that you need to filter your signal before taking data.  As you said, any filter will distort your final signal.  My preference would be to take the raw signal and apply a filtering in the analysis.  LabVIEW has a rich filter, so you can experiment later.  If you apply a filter before the digitization of data, you take you will never receive data.  However, if you know that your data has no component of your proposed cut filter frequency, you should be good.  An analysis of the power on your current spectrum should tell you this.  Be careful.  Your form of rise time may have information you want later.  If you filter, you will probably slow it down.

  Good luck!  Let us know if you need more information.

• How to hide the layer of OBIEE map

  Hello

  We have created 2 topics, 1 Base map (BM1; with these 2 themes) and 1 Tiler (TL1; with Base map BM1) in the card writer and recorded layers and the background map in OBIEE.

  Theme1: Country (style: C.WOM_SEE_THROUGH)

  Theme2: Inventories (style: M.SMALL_CIRCLE)

  Then, creates a dashboard on this map.

  It is, then that launched in dashboard both countries and inventories appear, although different zoom_level is selected for 2 layers and the map seems clumsy.

  We would like, the launch that should show only the country while we zoom to layer of inventories, these markers should appear, and so on if we add more layers; as it is generally in the cards we get on the internet.

  Help, please.

  Kind regards.

  BTW, if the problem is that the theme of the inventories is included at the bottom of map (BM1) then the solution is to do the following:

  -Remove the theme of the substantive definition of map using MapBuilder or by changing the CLOB in the database. Save it.

  -Remove all tiles for TL1 tilelayer that uses the bottom of BM1 updated map. Do this from the admin console mapviewer manage page of layers of tile or removing all the subdirectories under the tile cache store on the server where WLS/BI/MapViewer are deployed.

  -Restart mapviewer or to all least purge the cache metadata for the source of relevant data from the datasources mapviewer admin console page.

  -Overview of the tilelayer, in mapviewer administration console manage tile layers page to check that the theme of the inventories is increasingly part of the background sheet.

  -Test the card/analysis in OBIEE

• The 'Analysis' link on the computing business intelligence Oracle does not work

  Hello

  I am new to Oracle Business Intelligence EE. I downloaded the OBIEE and installed. But when I open it and try to click on the link of the analysis, nothing happens (see attached). Did I miss something during the installation that's why I'm having this problem. Please notify.

  Thank you

  Rabie

  (1) try different browser (I hope that it will work), I had faced same problem many times in the chrome browser.

  (2) check the authorization of level object in RPD - presentation Layer

• Create a visual notification for any record in the analysis of OBIE

  Hello

  I am running OBIE worm 11.1.1.5.0

  I created an analysis report that shows customer color bulbs

  light bulbs shows green light when there are customer records in the DB by a time interval
  

  But when there is no record by customer the bulb disappears and there is no indication

  How can I change this bulb will not go not and red color poster

  I hope I explained it well

  Appreciate any help

  Thank you very much

  Einat

  There are a few posts related to an outer join in this forum.

  In short, in MDB, select the logical fact table and its associated logical dimension table you want to configure. In the dialog box join logical, change the type of join to that desired.

  Check the generated SQL (any other analysis too) and problems of performance, if any. Caching can still cause an effect of inner join.

  Alternative (like to repeat), retain the existing functionality and create a new report to show customers who miss a period range using the operator filter "is based on the results of the analysis another." Well, in that case logically the operator should be 'does NOT rely on another analysis.

  HTH.

  Kind regards

  Maury.

• Title analysis to OBIEE - screen

  Hi all
  
  How can I display title analysis OBIEE?
  Yes, the analysis name appears, but not the title and subtitle.
  Help me please to solve this problem.

  You must change the view for the same title. By default, the name of report saved.

  Check if help