ReadyNAS online (disconnected VPN)

Similar Questions

• Disconnect VPN

  Cisco VPN Client version 4.8.02.0010 Cisco ASA5520 connection. I fireturcks using att air card. They are set to the automatic opening of VPN. If I disconnect them ASA they will not reconnect until I close the customer reviews. Is it possible to make the notcies go away or auto connect to ignore the message? Let me know. Thank you.

  Nice to hear!

  [Pls RATE if HELP]

• Connection to Small Business SERVER 2003 VPN

  Hello

  I am trying to connect to a SBS 2003 R2 through the VPN server.
  -Firewall remote (server side) is set to "Pass all"-online port 1723 and all others are open
  -Local firewall (on customers) are disabled
  -J' tried with stations W7 SP1, HP and XP Pro SP3 W7 SP1 Enterprise-online same result
  -J' tried 2 different networks customer-online the same result
  -RRAS is configured through the task list using PPTP and L2TP (pre-shared key)
  -Remote Acess strategy has been configured to allow users of Mobile
  -J' tested access with a user in the Mobile group and with administrator-online same result
  -Windows authentication (no BEAM)

  Configuration and using PPTP, I get the error 807 (immediately disconnected VPN)
  When the configuration and use of L2TP, I receive the error 789 (in negotiations)

  However, the following services remotely works very well (even with the active firewall):
  -Remote Desktop (RDP) on the server
  -Webmail
  -Web remote access (https://site.name.domain/remote)

  Could you please help me solve this problem?
  Thanks in advance.

  Hello Athena,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the following forum:

   

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Where the fix to CIT200 disconnected message?

  My phone has recently begun to show the offline message. The phone is not simply sign in to Skype but linksys shows connected in the taskbar (in xp). I have been looking for a solution to this problem in different forums and tried everything that was possible.

  Uninstall of & re - install the software for the linksys & Skype, disconnect the base from the usb port, turn on/off the phone, signing in and out of Skype, unchecking Skype to load at startup, restart... I did not take magic or nero or half of the things that people suggest that you close in the Task Manager. It's frustrating.

  This phone is relatively old and the last link that I read was in 2007 (http://forums.linksysbycisco.com/linksys/board/message?board.id=VoIP_Phones&thread.id=1318&view=by_d...) and had over 5,000 views on this issue and people always ask the same question.

  It is so 2009. Come on, it's already the fix?

  I found that my CIT200 placed online disconnected when I started Windows Live Messenger 2009.  I uninstalled WLM 2009 and used an older version (Windows Live Messenger 8.1) and have not had any problems since then.

  I don't know of all corrective to the conflict between the current version of Windows Live Messenger (2009) and the CIT200.

• VPN question: ISP assigned a private ip address

  Hi all

  Internet-online-online headquarters VPN 3015 concentrator

  Users remote VPN Client connected to the internet using a private ip address provided by the ISP (cable) is to establish a VPN tunnel, but they can not ping our private network.

  The only way to get the VPN works is when remote users use a public ip.

  It is a question of Cisco VPN Client? Or it has a solution...

  Thanks in advance,

  Kind regards

  Carlos Welhous

  Network engineer

  Hi Carlos,

  If your ISP gave you a private address, they must use NAT - in which case you will have to enable NAT - T on the VPN concentrator.

  To configure the NAT - T in the world, go to Configuration | System | Tunnelling protocols. IPSec | Screen of transparent NAT and check on NAT - T IPSec case.

• AnyConnect VPN SSL

  My org is currently in the middle to pass to a ssl vpn ipsec VPN.

  I have setup where users can use the anyconnect client for VPN access and they can access internal servers or address, but are not able to access the internet.

  What be the best solution toa would apply to get the fucntion of users to access external Web sites.

  mask 4 .xx 255.255.255.0 IP local pool SSL 10.x.x4.xx - 10.x.x

  Line 409: pool ip SSL

  10.x.X4.XX - 10.x.x 4 .xx mask 255.255.255.0

  Line 844: ssl trust-point ASDM_TrustPoint0 on the inside

  Line 845: ssl trust-point ASDM_TrustPoint0 outside

  : 860 vpn-tunnel-Protocol ssl-client online - clientless ssl

  : 860 vpn-tunnel-Protocol ssl-client online - clientless ssl

  Line 863: anyconnect ssl deflate compression

  874 online: client vpn-tunnel-Protocol ssl-ssl-clientless ikev1

  874 online: client vpn-tunnel-Protocol ssl-ssl-clientless ikev1

  Line 917: client ssl vpn-tunnel-Protocol ikev1

  Line 1072: SSL address pool

  Line 1076: group policy - by default-SSL_VPN

  Line 1077: SSLVPN webvpn-attributes tunnel-group

  Line 1079: allow group-alias SSLVPN

  Hello

  have you also tried split tunneling?

  A sample:

  standard of tunnel access ASA5505 (config) # permit 192.168.1.0 list splitting 255.255.255.0

  attributes of SSLClientPolicy strategy group ASA5505 (config) #.

  split-tunnel-policy tunnelspecified ASA5505(config-Group-Policy) #.

  ASA5505(config-Group-Policy) # split - tunnel - network - list value split tunnel

  ASA5505(config-Group-Policy) # webvpn

  ASA5505(config-Group-WebVPN) # svc ask flawless svc

  ASA5505(config-Group-WebVPN) # svc Dungeon-Installer installed

  ASA5505(config-Group-WebVPN) # time generate a new key 30 svc

  ASA5505(config-Group-WebVPN) # svc generate a new method ssl key

  BR

  Hans-Jürgen Guenter

• Impossible to reconnect the VPN to ASA on the internet

  Hello

  I ASA5540 running IOS 8.04 - K8, users are able to the VPN connection over the internet but impossible to reconnect the VPN when users disconnected abnormally (abnormally means they are not manually disconnect, VPN disconnect everything manually without problem occur). ASA showing an active session of the disconnected user and the user having reason 433 at the re-login VPN.

  Any suggestion and recommendation for this case.

  Awaiting your repies.

  Thank you very much.

  Kind regards

  Arsalan

  Hello

  under the tunnel-group, try to reduce the keepalive interval... Can help detect that the peer is down faster...

  Best wishes

  McLaughlin

• Suggestions of VPN for Windows 7 and ASA 5510

  We currently have a VPN solution with an ASA5510 and the client to the PC using the Cisco VPN Client V5.0.07.0410.  This works for Windows XP SP3 and Windows 7, however, Windows 7 will not allow enable start before logon or disconnect VPN connection when Logging Off (i.e. the Windows logon properties are missing in the client configuration options).  Is there a fix for this VPN client?  What VPN upgrade options available, which will allow these options?

  Thank you very much for your suggestions!

  You must use the AnyConnect client. I got on to start the same kind of project and purchased a license key AnyConnect, they are the easiest option.

  Sent by Cisco Support technique iPad App

• Unable to browse the internet while connected to the VPN

  Hi all..

  It was working fine until yesterday morning... Since then, I am not able to browse the internet it I am connected to the VPN... I get a "Page cannot be displayed" error message... the second that I disconnect VPN, I am able to browse internet... I did not change/facilities to do... help please...

  Thank you...

  Check to see if you can ping by IP address (make sure that the DNS information are properly learnt). Also try setting MTU interface to 1300 in case there is a change within the network of your ISP. What is mode NAT or NAT device not compatible?

• Unable to connect to the Update Center

  I just finished my fifth unsuccessful attempt to install jdeveloper 11.1.1.4 on a laptop from scratch. I already had a 11.1.1.3 installation and work of the need to upgrade to 11.1.1.4 to align with the SOA server I have deploy across the network.
  
  I removed 11.1.1.3 and 11.1.1.4 facilities (via windows install/uninstall program, and then manually deleting directories that they were in), and then try to reinstall several times, remove after each unsuccessful attempt).
  
  My problem is when I try to install the extension of SOA. After the initial installation of the software in JDeveloper, I'm going to "Help"-> "check for updates... ».
  Rather than see a list of locations to update I get a popup on top of the Update Center popup, which claims that it is:
  
  Unable to connect to the internet to check updates.
  
  If you are behind a firewall or use a proxy to access web pages, check your settings of proxy below and click OK to try again.
  
  Normally, I use a url of proxy auto to manage my access to the proxy for that so I'm VPN would be in my company or not, Firefox handles my access network correctly. Because it is not an option in the context menu, I found a proxy host and tried to use it while I was VPN in. That has not helped - I tested the proxy of the popup and it failed. I Redid the installation 2 - 3 times while only had in VPN, then abandoned.
  
  So I uninstalled everything, disconnected VPN and did another fresh install. There is also no in the same way (Nothing in the center of update list and I got the same error popup).
  
  It's a mystery all that JDeveloper is really doing. It makes me crazy when the software works not seamlessly like this. I don't see what it is really doing, and the error message is useless or worse. (Why is she even suggesting that I provided a proxy when I'm straight on the internet. Why didn't he just tell me what he's trying to do, and, if I can fix it). I have a fine Internet connection that works for everything else.
  
  I know JDeveloper is still caching configuration information (my two projects appear in the list of applications), and so I guess that's also implementing caching some old login information that it does not show me. But I find no visible which erase and start over.
  
  Anyone know how to get JDeveloper to just try to connect directly to find update centers after that he cooked the old way to do it in a file somewhere hidden?
  
  Thank you

  Hello
  If JDeveloper is installed successfully, then you are good to go. Come to the addition of Extensions for SOA, BPM etc, you can do this either online (directly and update the Oracle site) or offline also. Average offline, first download the corresponding ZIP extension files for your version of 11.4 JDev as a composite model soa, bpm, Publisher etc. Then click on help-> Check For Update-> ignores errors or the pop-up windows and cancel-> them on the screen main down check the box named "install local file". Here browse and select a zip file at a time and move forward.

  http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/156082.XML#Oracle.SCA.Modeler (Oracle SOA Composite Editor-> 11.4)
  http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/156082.XML#Oracle.BPM.fusion.Studio (Oracle BPM Studio-> 11.4)

  For SOA/BPM, simply just above 2 extensions.

  Thank you
  Ravi Jegga

• Drives and airport Extreme Base Station to disconnect after connection to the VPN

  At home when I'm on WIFI, everything works fine. At the moment where I connect to the VPN to do office work, the base station will disconnect and accessible either.

  Any help?

  The problem you are experiencing is perhaps due to the type of VPN tunnel that you use to connect to your workplace. There are basically two types: 1) full or partial) 2. Note: The different VPN clients can use other words, but these are usually options when you set up a tunnel.

  When you use a complete tunnel, all traffic between your computer and the VPN of your working server, through the tunnel. No traffic is allowed on your local network, and therefore, all local resources are not available. With a partial tunnel, your computer data traffic, may as well go through the tunnel and also to your local network. One reason to use a partial tunnel, for example, is that you have a local printer, you need to perform printing. You can be connected to this type of tunnel for access to the documents and then, be able to print on this printer... otherwise, with a tunnel of full, you would print to a printer at your place of work.

• The status indicates online even if disconnected

  Hello

  I use the latest version of Skype and have a problem where my status says Online then I get disconnected from my computer and other devices. I changed my password, but that didn't help. Is there a reason why this can happen?

  Thank you!

  Hello

  Thanks for the suggestions, but Skype chat was able to help me solve the problem.

• ReadyNAS-102 (6.4.1) disconnects randomly

  Hi all

  Over a year ago I bought a NAS readyNAS-102 as replacement for my old configuration by using a media player with external drives. From the beginning I was very happy with the way everything worked, it was so good!

  I was able to access my files across using FTP, I could listen to my Samsung Smart TV and all devices (laptops, ipads, you call it) could access the database, I created.

  This has stopped recently. For some unknown reason my readyNAS-102 with firmware 6.4.1 randomly disconnects after a while to load. It doesn't matter if it is used TV, laptop or tablet.

  For example, when you watch a movie on the TV, the laptop or Tablet the device disconnects from the SIN after a random delay. This may be 3 or 30 minutes in the film. Strange thing is, it is not peripheral wide, so when the laptop is disconnected (I can't access it storage network or via static ip address) I can still access the NAS with my ipad.

  The same thing happens when you look at photos etc. I already tried several things but can't seem to find the missing piece of the puzzle.

  Perhaps people with more knowledge have a hunch where the problem may be.

  Kind regards

  Tomas

  I am pleased to announce that for the moment, the problem disappeared.

  I updated the firmware to the latest version beta 6.4.2 - T72 and tested by watching a movie.

  For 1 hour and 15 minutes the NAS has run smoothly so I am happy again.

  Thanks for the quick and clear answer y ' All!

• Why users need to disconnect and reconnect to the VPN to RDP?

  Most of the time our VPN works perfectly, but sporadically users must reconnect to the VPN to use remote desktop. Is that the user can log on to the VPN and access to things like network drives, but not other features like RDP. If they disconnect and then reconnect to the VPN, poof, everything works fine. No matter if it is minutes or hours in the VPN connection, it still requires reconnection. It seems that it is always on the second attempt at the nick of this post point called 'the second time's a charm

  We are using RRAS in SBS 2008 and the problem is multiple users tempting to VPN in XP and Win7 machines. We replaced the switches (now using Dell Powerconnects) and the router (now using Cisco RV042) and the problem persists.

  Suggestions or responses are greatly appreciated.

  Hello

  The question you have posted is related to Technet and would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• When I come online my brother disconnected from xbox live, then I do? all ideas

  I got an xbox for Christmas and I got online, but every time I go online me and him are disconnected from what I can do? We are on the same connection please please help

  The only way I can see what is happening is if both of your accounts use the same email address.  This my and isolated issue with just you two.  I have not had this happen when I got a friend to come to reproduce the problem you are having.   It seems to be past by your specific problem.  I highly recommend you check out the forums Xboxlive.com and help site.  You might also want to check how your router settings that the two devices are connected to the.

  I have a simple philosophy: just assume everyone is a piece of c.r.a.p. and then be pleasantly surprised if you find someone who is not.