To add totals in a certain date range
I have 3 sheets. Income, expenses and then an annual journal (has twelve columns, one for each month). Is there a way to get the numbers to add totals to a column of the spreadsheet of spending within the date range 01/01/16 and 31/01/16 and put the total in a cell in January on my sheet of each year. I can't understand a formula so that it can find the date range. I get a synyax error message.
Assumptions:
Your TABLES (not the leaves) are named income, spending and summary. Here is any other tables in the document with these names.
Dates of expenditure are in column A of the table expenses. Other than the header line, all the entries in this column are values Date and time that have been entered as dates only.
The amount for each item of expenditure is in column C of the expense table.
Line 1 of the analytical table is defined as a header line.
January is in column A of the summary table.
Summary::A1 cell contains the date January 1, 2016, but can be formatted to display only the name of the month or the month and year. (but see the note below) *.
Enter the formula in the cell that will contain total expenditures recorded with dates in January 2016 below:
= SUMIFS ("Expenses: Expenses, $C: $A," > = "& A1, Expenses: $A," < = "& EOMONTH(A1,0))
Example: All the amounts of expenditure were reduced to 1.00 simple confirmation of funds.
* NOTE: The formula has previously worked with the format of the cells in the row 1 Summary defined to show only the month and the year (two digits) of the effective date values (the first day of the month indicated), but the table I built tonight January 1, 2015 to the format to display 16 Jan, one was interpreted as January 16 (2016) , and SUMIFS formula did not include not January 1 to January 14 numbers in January total.
A custom, displaying the month (short or long) and the year (four digits) or a custom format shows only the name of the month (short or long) gave good results.
Note that any format under control of the display, the effective date is the first of the month displayed.
Table built and tested in Numbers ' 09 (v 2.3)
Kind regards
Barry
Tags: iWork
Similar Questions
-
Add automatically the dates in a date range
Is it possible to enter a start date and end date in a form and then have a line created for each day in the beach with the date? I have created a timesheet and hold a line a day in the date range entered.
Yes - it's quite possible.
To make this work, you have:
1. set up your timesheet as fields entries in a repeating subform
2. decide if you want the timesheet entries to update for example on the click of a button, or when the user enters a new date
3. write code on the event suitable for calculating the number of days between the dates and set the number of instances of the repeating subform
Please see the attached sample form.
Notes:
-J' used FormCalc this makes it easier to manipulate dates. In general, I would use JavaScript, but the date manipulation is one of the rare occasions when formCalc is by far the best choice
-J' used a field floating in the subform timesheet to demonstrate how you displayed the date in each line
-This form is an example. Additional work is needed to make this robust dealing with the case, for example when the date is before the following date
Ben Walsh
www.Avoka.com -
summarize records by date range
I have an ambitious project where I need to report a summary report for a date range for each code. I'm not against the use of a helper function plsql to calculate the summary result because I'm not sure it can be done in sql. Any help would be appreciated as my attempts have failed.
Here is a sample of the data.
ID START_DATE END_DATE
445 1 January 2010 Thursday, April 30, 2010 - simultaneous example
445 1 JANUARY 2010 MAY 31, 2010
445 17 MAY 2010 AUGUST 6, 2010
2710 1 May 2010 August 31, 2010 - row example
2710 01 - SEP - 2010 DECEMBER 31, 2010
2710 1 JANUARY 2011 APRIL 30, 2011
2710 1 MAY 2011 AUGUST 31, 2011
658 1 January 2010 Thursday, April 30, 2010 - simultaneous example
658 1 JANUARY 2010 MAY 31, 2010
658 1 JANUARY 2010 MAY 31, 2010
108 28 December 2009 January 22, 2010 - non-consecutive example
108, 29 MARCH 2010 APRIL 11, 2010
108. ON MAY 1, 2010 MAY 31, 2010
2535 1 March 2010 March 14, 2010 - example 2 consecutive and non-consecutive 1 combination
2535, MARCH 15, 2010 MARCH 28, 2010
2535, APRIL 5, 2010 MAY 2, 2010
999 1 March 2010 March 14, 2010 - example 2 simultaneous and consecutive 1 combination
999, 1 MARCH 2010 APRIL 24, 2010
999 APRIL 25, 2010 MAY 2, 2010
Here is the result summary of what I would be returned as for each ID
ID START_DATE END_DATE
445 1 JANUARY 2010 AUGUST 6, 2010
2710 1 MAY 2010 31 AUGUST 2011
658 1 JANUARY 2010 MAY 31, 2010
108. ON MAY 1, 2010 MAY 31, 2010
2535, APRIL 5, 2010 MAY 2, 2010
999, MARCH 1, 2010 MAY 2, 2010
Thank you
ToddHello
I see it; you want to look at only the last set of overlapping lines for each id, where the definition of "overlap" is extended such that two rows are expected to overlap if the line later begins between 0 and 24 hours after the end of the previous.
So what I posted was a bit off; Need to add a WHERE clause to not take into account that the last series of overlapping lines. Which would be to change the FROM clause to use, not the table, but something that indicates whether a line is in the last together or not, and this is the interesting part. We can use analytical functions (I used MIN in the example below) to determine if a game begins with a certain rank, then we can use other analytical functions (such as SUM) to see how many series began, and therefore, what game of any line belongs.
WITH got_new_grp AS ( SELECT id, start_date, end_date , CASE WHEN end_date < MIN (start_date) OVER ( PARTITION BY id ORDER BY start_date ROWS BETWEEN 1 FOLLOWING AND UNBOUNDED FOLLOWING ) - 1 THEN 1 ELSE 0 END AS new_grp FROM my_data ) , got_grp AS ( SELECT id, start_date, end_date , SUM (new_grp) OVER ( PARTITION BY id ORDER BY start_date DESC ) AS grp FROM got_new_grp ) SELECT id , MIN (start_date) AS start_date , MAX (end_date) AS end_date FROM got_grp WHERE grp = 0 GROUP BY id ORDER BY id ;
Output of your sample data:
. ID START_DATE END_DATE ---------- ----------- ----------- 108 01-May-2010 31-May-2010 445 01-Jan-2010 06-Aug-2010 658 01-Jan-2010 31-May-2010 999 01-Mar-2010 02-May-2010 2535 05-Apr-2010 02-May-2010 2710 01-May-2010 31-Aug-2011
Given that this problem is the last set of rows for each id, I counted sets in order from the last to the first.
I consider a row of "from" a group if she finished more than 24 hours before all the lines that begin beginning later. Subquery got_new_grp sets new_grp to 1 for these lines. new_grp is 0 for all lines that overlap with a few lines later departure.Published by: Frank Kulash, June 11, 2010 12:30
-
Conditional formatting depends on the date ranges
Basically, I want to be able to enter a date in column A and a sum of money in the B column, depending on where the date in column A grave in a date range, I want the money in column B to copy to a corresponding column. Is this possible? The only questions I found on here deal in a conditional formatting with dates have to do with derivative.
Thank you
Julio
I hope this help to clarify for you...
It is not bringing conditional formatting. Formatting conditional would change the format of a cell (or cells)... as the font, color, size, color cell background, or other formatting character is tics of a cell based on the contents of the cell
You ask about including of the value of a cel another beach under certain conditions
Here is an example:
The first three rows are header lines.
You must enter a valid date for the towing job. Using the format "mm/dd/yyyy".
C4 = IF (AND (DATEVALUE (A4) ≥DATEVALUE($B$1), DATEVALUE (A4) ≤DATEVALUE($B$2)), B4, "")
It's shorthand dethrone select cell C4, and type (or copy and paste it here) the formula:
= IF (AND (DATEVALUE (A4) ≥DATEVALUE($B$1), DATEVALUE (A4) ≤DATEVALUE($B$2)), B4, "")
Select the cell C4, copy
Select cells C4 at the end of the C column, paste
-
AMOUNT of Oracle with the date range
Hello community,
I'm having a problem with the addition of a field with a date range. It comes to my table
JVREF VARCHAR2 10 - - - - - - SOURCE VARCHAR2 2 - - - - - - PERIOD VARCHAR2 6 - - - - - - JVDATE NUMBER - 38 0 - Nullable - - GLCODE VARCHAR2 24 - - - - - - DESCR VARCHAR2 40 - - - Nullable - - AMOUNT_0 FLOAT 48 48 - - Nullable - - AMOUNT_1 FLOAT 48 48 - - Nullable - - JVTYPE VARCHAR2 4 and I'm glad the the following statement works as expected
SELECT AMOUNT_1 FROM 'TABLE' where
TO_DATE ("PERIOD, ' YYYYMM") > = to_date ("'201501 ',' YYYYMM")
and
TO_DATE (PERIOD, 'YYYYMM') < = to_date ("'201502 ',' YYYYMM");
E.g.
AMOUNT_1
56192.48
59863.57
48570.1
72407.12
21626.96
35532.96
75860.67
25623.62
54799.83
16872.3
The next thing I want to do is the sum of these amounts... so I changed my statement to become
SELECT SUM (AMOUNT_1) 'TABLE' where
TO_DATE ("PERIOD, ' YYYYMM") > = to_date ("'201501 ',' YYYYMM")
and
TO_DATE (PERIOD, 'YYYYMM') < = to_date ("'201502 ',' YYYYMM");
and now I'm getting
ORA-01841: (full) year must be between-4713 and 9999 and not 0
I also tried
SELECT THE PERIOD (AMOUNT_1) SUM OF "BRE". "' OPW_NMLTRX ' where
TO_DATE ("PERIOD, ' YYYYMM") > = to_date ("'201501 ',' YYYYMM")
and
TO_DATE (PERIOD, 'YYYYMM') < = to_date ("'201502 ',' YYYYMM")
Group by PERIOD
with the same results... I can't figure out what I should do next?
Thank you.
Hello
Solomon Yakobson says:
Question:
SELECT *.
From your_table
WHERE the TO_NUMBER (SUBSTR (PERIOD, 1, 4)) NO BETWEEN-4713 and 9999
OR TO_NUMBER (SUBSTR (PERIOD, 1, 4)) = 0
/
To find the offending rows.
SY.
This can cause other errors, according to what is in this column. A better way would be something like:
Primary_key SELECT, period - add more columns you want
'TABLE' - avoid names which need quotation marks
(Period WHERE the TRANSLATION)
'012345678'
'999999999'
) <> = "999999"
OR SUBSTR (period, 1, 4), not BETWEEN "1900" AND "2099"
OR SUBSTR (period 5) NOT BETWEEN '01' to '12'
;
Now there may be errors of conversion, because there is no conversion.
-
Date range - CM14 and BI Publisher
I have already asked on a date range. I have a follow-up question. Is it possible to set a range of dates in a form and not a report?
To add the date range in the header of the form/report, you will first need to modify the data model so that you have a floor/ceiling or min/max output value. This allows to retrieve the records name and which were added after the user enters the prompt. Technically it does NOT display what the user types in, but rather the first and the last date in the accounts made within the range.
I don't think there is a way to add the dates entered in the prompt on the release of the report.
Then, to add to a form. I have not tested the guest with forms but thanks to explain what you wanted. First of all, if you set the prompt for CRITERIA in the form on the Date of receipt of the material, you can test to see if it recovers the correct records. If the CRITERIA function does not recover on the form, then it is possible that the Oracle only built this based on criteria to work on the reports. If it works, you must add additional expressions in the data model to retrieve the first and last records to display the 'to' and 'from' dates on the form.
Otherwise, your solution to ask for dates and material_name in the report is the next best thing.
-
Hi Experts,
A very happy new year to all of you (a little in advance)!
I have a table where I have the id of employee and the task assigned with the start dates and end dates. Overlap in the dates of the tasks is a data delivers however I know how to spot them and eliminate. There is therefore no date of tasks that overlap
Employee_id
Task_No
Task_Start_date
Task_End_Date
Examples of data
1 T1 1 January 2014 February 28, 2014
1 T2 March 1, 2014 31 December 2014
2 T1 23 January 2014 31 December 2014
2 T2 1 January 2015 December 31, 2073 (means end of time)
3 T3 1 January 2014 July 15, 2014
3 T4 August 1, 2014 31 December 2014
T5 4 1 January 2014 December 31, 2073
I want to design a query where I provide the end date and it will list all the employees that are free for the same day from 1 January 2014. Thus, for example, if I give December 31, 2014, it will list the
EmpId (first day where the employee is free)
2 January 1, 2014
3 July 16, 2014
If I give the end = end date of time(31-Dec-2013), result-
EmpId (first day where the employee is free)
1 January 1, 2015
2 January 1, 2014
3 July 16, 2014
If I give the end = date January 31, 2014, expected - result
EmpId (first day where the employee is free)
1 January 1, 2015
I conceived after the request, but he intercepted not 2 employee ID. Also, it provides no flexibility to change end date-
Select *.
from (select employe_id,
task_start_date,
task_end_date,
lag (task_end_date, 1, task_start_date) on prev_end_date (partition by employee_id arrested by task_start_date)
of shop.employee_tasks
where task_end_date > = trunc (sysdate))
where task_start_date - prev_end_date > 1
Thanks in advance!
Kind regards
This is an example of what I call the query 'free time': you have the dates when you are busy and you want the dates where you are free.
You can find a nice solution for the problem of base here: ask Tom "SQL Query to find gaps in the date ranges" (search for solution of Anthony Boucher). Please note that this solution works even with the date ranges overlap.
To apply the solution here, first create the test data (please do it yourself in the following questions).
create table t(Employee_id, task_no, Task_Start_date, task_end_date) as select 1, 'T1', to_date('01-jan-2014'), to_date('28-feb-2014') from dual union all select 1, 'T2', to_date('01-Mar-2014'), to_date('31-Dec-2014') from dual union all select 2, 'T1', to_date('23-jan-2014'), to_date('31-dec-2014') from dual union all select 2, 'T2', to_date('01-jan-2015'), to_date('31-dec-2073') from dual union all select 3, 'T3', to_date('01-jan-2014'), to_date('15-jul-2014') from dual union all select 3, 'T4', to_date('01-aug-2014'), to_date('31-dec-2014') from dual union all select 4, 'T5', to_date('01-Jan-2014'), to_date('31-Dec-2073') from dual;
In the query, you must add records for yesterday and for the "end date" you want. This allows you to "free time" before and after the date ranges in your table.
Now, you partition by order of Task_Start_date and employe_id. Using the analytical function of the max (task_end_date), you get the last date of end so far. Add 1 and you get the first time (maybe). To make sure that the date is free, it must be before the next start date.
variable end_date varchar2(64) exec :end_date := '31-Dec-2073'; -- with boundaries as ( select trunc(sysdate)-1 task_start_date, trunc(sysdate)-1 task_end_date from dual union all select to_date(:end_date)+1, to_date(:end_date)+1 from dual ), data as ( select * from t where task_end_date >= trunc(sysdate) and task_start_date < :end_date union all select distinct a.employee_id, null, b.task_start_date, b.task_end_date from t a, boundaries b ) select employee_id, min(free_start) free_start from ( select employee_id, max(task_end_date) over (partition by employee_id order by task_start_date)+1 free_start, lead(task_start_date) over (partition by employee_id order by task_start_date)-1 free_end from data ) where free_start <= free_end group by employee_id;
EMPLOYEE_ID FREE_START 1 JANUARY 1, 15 2 1 JANUARY 14 3 16 JULY 14 -
Receive every month between date Range
Hi all
I said you want to display the month and year for the date range. IE Start date: 01-11-12, end Date: 31/05/13
SELECT COUNT(T1.CUST_NM) AS COUNT, TO_CHAR(T1.CREATE_DT,'MON-YY') AS MONTH, SUM(T3.DISBURSEMENT_LIMIT) AS TOTAL FROM CUSTOMER T1, ACCOUNT T2, LOAN_ACCOUNT T3, CREDIT_APPL T4, PORTFOLIO T5 WHERE T1.CUST_ID = T2.CUST_ID AND T2.ACCT_ID = T3.ACCT_ID AND T3.APPL_ID = T4.APPL_ID AND T4.PORTFOLIO_ID = T5.PORTFOLIO_ID and t1.CREATE_DT between to_date('01-01-10','DD-MM-YY') and to_date('30-12-10','DD-MM-YY') GROUP BY TO_CHAR(T1.CREATE_DT,'MON-YY')
Exit SQL:
County Month-year Total 8 JAN-10 15300 6 FEB-10 4245000 11 AUG-10 144500 6 DEC-10 15500 Now SQL returns matching records to date. But the requirement is to display the name of the month, the number and total 0 if there is no data found.
Power required:
County Month-year Total 8 Jan 15300 1 Feb-10 118750 0 March-10 0 0 Apr-10 0 0 May - 10 0 0 Jun - 10 0 0 Jul-10 0 11 Aug-10 144500 0 Seven.-10 0 0 Oct-10 0 0 Nov - 10 0 6 Dec - 10 15500 Please suggest me SQL to archive the above of the requirement.
Thanks and greetings
Saami
Try this
with t
as
(
Select count (t1.cust_nm) as County
to_char(t1.create_dt,'mon-yy') per month
, sum (t3.disbursement_limit) total
the t1 client
in t2
loan_account t3
credit_appl t4
the t5 portfolio
where t1.cust_id = t2.cust_id
and t2.acct_id = t3.acct_id
and t3.appl_id = t4.appl_id
and t4.portfolio_id = t5.portfolio_id
and t1.create_dt between to_date ('01-01-10', ' dd-mm-yy')
and to_date ('30-12-10', ' dd-mm-yy')
Group
by to_char(t1.create_dt,'mon-yy')
)
t1
as
(
Select to_char (add_months (to_date('01-01-10','dd-mm-yy'), level-1), 'Mon - yy') month_list
of the double
connect
by add_months (to_date('01-01-10','dd-mm-yy'), level-1)<= >= >
)
Select nvl (t.count, 0) as County
t1.month_list per month
, nvl (t.total, 0), as total
from t1
left
Join t
on t1. month_list = t.month
-
Insert record monthly between certain dates
Hi all
Any help is very appreciated.
I would like to add records to a table every month according to certain dates. So I'll have a start_date and end_date and I would like to add a record to a table the 1st of each month between these two dates.
Can you please let me know what would be the best way to address the issue and give an example of the code please.
Thank youHello
Whenever you have a problem, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) of all the tables.
Also post the results you want from this data, as well as an explanation of how you get these results from these data, with specific examples.
If you ask on a DML statement, such as CREATE TABLE, INSERT, INSERT statements must re-create the tables as they are to the DML, and the results will be the content of the or a modified tables when it's all over.
Always tell what version of Oracle you are using.Here's one way:
INSERT INTO table_x (due_date) WITH parameters AS ( SELECT DATE '2011-10-01' AS start_date , DATE '2012-03-31' AS end_date FROM dual ) SELECT ADD_MONTHS ( TRUNC (start_date, 'MONTH') , LEVEL - 1 ) FROM parameters WHERE ADD_MONTHS ( TRUNC (start_date, 'MONTH') , LEVEL - 1 ) >= start_date CONNECT BY LEVEL <= 1 + MONTHS_BETWEEN ( TRUNC (end_date, 'MONTH') , TRUNC (start_date, 'MONTH') ) ;
-
If I restore firefox until a certain date I lose bookmarks in my other brosers
My story has been deleted whenever I closed Firefox. I didn't know that. Now I need my story, for the last 10 days. Options of Firefox that I can restore my favorites until a certain date but will be replaced by the new story. Is it only in Firefox or it will mess up my favorites in my other three browsers?
Yes, I'm afraid so. Sorry about that. The history information is stored in the places.sqlite file in the Firefox profile folder when it is shown in the library. In this case the story has not been stored. You may be able to get the nine most visited sites before this adjustment was made, or the pinned sites by opening a new tab. If you use a router with logging enabled, you may also try this way.
-
Is it possible to add the location and the date on the pictures in a slide show?
Is it possible to add the place and the date on the pictures in a slide show?
Only if you manually add a title slide t photo and enter this information manually. There is no automatic way in Photos.
Click on the button "+" at the right end of the slide show to add a title slide.
-
Smart album by date range does not select all the pictures, it should.
I created a Smart Album with a range of the year.
Some pictures appear in the Smart Album, but others do not, even though their information shows that their date corresponds to the range.
I tried a repair of the photo library database, but that did not help.
Try breaking the rule of date range: a buggy behavior reported in some language settings.
This version shows more photos?
-
My daughter has a 669-777-9492 saying text iCloud would delete all the photos on his account iCloud and txts before a certain date, unless she provided her iCloud account information. I told him to sit tight, I think it's a scam. Is it?
Yes, it's a scam.
-
The smart Albums based on the date range cause app Crash Photos
While I'm setting up a new Smart Album based on day of photos between 12/01/2015 and 31/12/2015 the Photos app closes with a crash. Cannot set the second date (the end date for this album). However, I can easily create a new Smart Album for next month (01/01/2016 and 01/31/2016). I create smart Albums, because the new Photos app does not like the old iPhoto does with my Photos from the photo gallery.
How can I solve this? I don't have an album of December...? !
You are in an area where the date format is different from the United States? Earlier this year, we have seen small business issues have reported that rules for smart albums date range do not work with the primary language set to French or German.
Try to change the primary system language to English with an English date format. Photos could be trying to read the 12/31/2015 as the 12th day of the month 31.
Or use a different date based on 'before' rule and after.
-
Yesterday morning, I was able to select the day I wanted to see, but I checked and noticed an updated with no date range in the afternoon. I want to keep track of that which is seen day after day, not a week. Help?
Hello
Thanks for posting your query on the Microsoft Community.
We understand that you want to track Web activity report in parental control
on a daily basis. However, currently, the family safety activity reports Web can
show only on a weekly basis.If you think that the display of the activity report on the Web on a daily basis is a great
to have the option, you can submit Microsoft using the link below.
https://Windows.uservoice.com/forums/265757-Windows-feature-suggestionsThank you.
Maybe you are looking for
-
Where can I download Toshiba DVD Player
Where is it possible to download?
-
Under the "Home" tab, the "Fill" button is grayed out. How to make it active? (Paint, Windows 7) Ed
-
I hope someone can help me. Trying to turn my iMac and appearance of the white apple logo and it seems that it is loading, but then the screen goes black. There is no edge loading, also the fan does not start. What can I do?
-
Trying to get my downloads to install. Using Windows Vista
I try to install I tunes and Avast and after downloading they install it. Says config is wrong
-
How can I fix the error 0xe7210001 that an internal error has occurred
For the last month, I have an error message with "0xe7210001 an internal error has occurred" and it seems to be related to the fingerprint softward pre-installed on my Sony laptop. The error when I open the files. For example, I opened a folder and o