Find an attribute value Boolean inferred at a given date in the past

Similar Questions

• Support for LDIF of colon in attribute values?

  There is an incorrect entry in LDIF:
  
  DN: cn = APPLICATION, or = DBOLS_Profiles, OU = lookup, o = systems, dc = xyx, dc = abc
  objectClass:olsProfiles
  objectClass: top
  olspolicyname: HOME
  olsmaxreadlabel: abc: def / jkl:mno
  
  because the value of the olsmaxreadlabel attribute contains two points. Is there a way to get around this? A way to store the colon in an attribute value?
  
  Thank you

  Try one of the tools that comes with the ldap directory server...

• Display of the values null when there is no data

  There are two columns 'A' and 'B' in the report which has values. IF there is no data in the report, it displays the following system message
  
  
  + 'No results '.
  + The specified criteria result no data. This is often caused by the application of filters that are too restrictive or contain incorrect values. Please check your filters to ask and try again. The currently applied filters are given below. » +
  
  My requirement is, indicates a value of zero instead of this message in the table format and should show the table axis 0.
  
  Please give me your entries and help me find the solution
  
  Thanks in advance.
  
  Published by: user10414249 on December 1st, 2009 14:22

  Yes, it is a different problem. Mark this "answered" and open a new thread.

• Workflow runtime do not receive updated the configuration element attribute value

  I added an attribute called "maintenanceMode.  At the beginning of the launch of a workflow I find the value of this (it's a Boolean value) and if it is set to true, the workflow sleeps for 5 minutes then wakes up and checks that the value again.  If it is false then the workflow must run the rest of the run.  The problem I have is that the workflow does not seem to raise the value of the attribute as it was during execution.  If I change the value that I do it manually does not seem to pick up the change.  Is there a discount of some sort I require before you archive it to clear any cached value?

  Paul

  To attract the attention of Paul on this post.

• UI Scripting - attribute value

  Is it possible to get an attribute value when UI scripting?

  Using accessibility Inspector, I see an accessibilityVisibleRows attribute in an AXOutline element, but I don't know how to get their hands on it.

  As a first step, try statements like those below, one at a time:

  say application "System events".

  say process of 'Finder '.

  attributes of Diagram 1 of ...

  the attributes name 1 of ... outline

  the attributes value contour 1 of ...

  value of attribute [attribute name] 1 of ... outline

  end say

  end say

• Drag and drop the attribute value

  Hello

  12.1.3 Jdev

  I want to create a screen like below with 2 tables. A table lists the names of available teachers. (TEACHER_NAME will be visible and TEACHER_ID is hidden)

  Second table shows the hours for each day. I should be able to drag the name of the teacher at appropriate times (time column is text entry / list of values) and I should be able to record the details (TEACHER_ID should go to the database).

  

  I watched the youtube video below and I am able to use the Drag & Drop attribute to copy the values of input/output of the text input text. But I can't drag when the source is an area of table

  https://www.YouTube.com/watch?v=MKthiC8eyLU

  Any help to achieve the same is appreciated.

  Hello

  Its simple. Please find below the code for drag the teacher instead of teacherName id

  Important thing:

  label = "#{bindings." TeachersView1.hints.TeacherName.label}.

  required = "#{bindings." TeachersView1.hints.TeacherName.mandatory}.

  columns = "#{bindings." TeachersView1.hints.TeacherName.displayWidth}.

  maximumLength = "#{bindings." TeachersView1.hints.TeacherName.precision}.

  shortDesc = "#{bindings." TeachersView1.hints.TeacherName.tooltip}.

  ID = "it1" >

    

                               

  Drag source will look like

  and dropTarget will look like

• Substitute label attribute values?

  Hello!

  I want to replace the default values to view label attribute and replace them with the translations that I receive a database table.

  I made custom classes TranslateViewDefImpl (overloaded function "getAttributeDefImpls"), which extends ViewDefImpl, TranslateViewObjectImpl ("getViewAttributeDefImpls" overloaded) extends from ViewObjectImpl, TranslateViewRowImpl ('createViewRowAttrHints' after this overloaded post) extends from ViewRowImpl where I try to substitute the attribute definitions.

  I used "setProperty" method on the definition of attribute to set the "AttributeHints.ATTRIBUTE_LABEL" and at first, everything seemed fine - the right of the attribute translation appeared. But the problem is when you have two or more clients with different locale by using the same page. In case of replacement methods using '(AttributeHints.ATTRIBUTE_LABEL, labelTranslation) adi.setProperty', label prepares for the right customer (a) local translation, but the problem is when another customer B with different regional settings accesses the same page. Initially, he sees the right translations, but when the first customer A refreshes the page, all attribute label translations are wrong locale (using the locale settings of client B). When client A refreshes the new page, labels are still in the local right, but when client B refreshes, it sees translations of customer locale.

  It seems that these overloaded classes are all static for the application and when a property is set, all clients use the same property, adi.getProperty (AttributeHints.ATTRIBUTE_LABEL) returns the same value for all clients using the application.

  Then I stumbled on this next post. At first, I thought I found the solution, but when I tried this approach, it did not work. This is the code:

  AttributeDefImpl at = (AttributeDefImpl) vo.getAttributeDef(0);  
  
       at.setProperty(AttributeDefImpl.ATTRIBUTE_LABEL +"_ResId",   
                      "VEmployees.Id_LABEL");  
    
       at = (AttributeDefImpl) vo.getAttributeDef(1);  
       at.setProperty(AttributeDefImpl.ATTRIBUTE_LABEL +"_ResId",   
                      "VEmployees.LastName_LABEL");  
    
       ViewDefImpl viewDef = (ViewDefImpl) ((ViewObjectImpl) vo).getDef();  
       //Create custom properties bundle definition  
       PropertiesBundleDef rb = new PropertiesBundleDef(viewDef);  
       rb.setPropertiesFile("com.cs.blog.dynamicbundle.model.VEmployeesBundle");  
         
       viewDef.setResourceBundleDef(rb);  
  
  

  I can't find documentation anywhere using '_ResId' with AttributeDefImpl.ATTRIBUTE_LABEL and setting my own resource Pack (which pulls all the translations of a data source). When I use this approach, label attribute values are not changed and have their default value.

  Help, please. Is my approach far? How did did you translate see attribute labels using translations of the database?

  I use JDevelper 11.1.2.3.0

  Marko,

  All you need is:

  1. your EO to point to a ListResourceBundle class, instead of the boot of property by default, as I described above.

  2. each attribute EO have the right name for the label:

  <>

  Name = "CountryNo".

  Precision = "22".

  ColumnName = "CountryNo."

  SQLType = 'NUMBER '.

  Type = "Java.Math.BigDecimal"

  ColumnType = 'NUMBER '.

  IsPersistent = "false".

  IsUpdateable = "false" >

  <>

  ResId ="COUNTRY_NO_LABEL" / > ".

  <>

  ResId = "DefaultNumberFormatter_FMT_FORMATTER" / >

  <>

  ResId = "MASK_NUMBER_1" / >

  Here, you will need to COUNTRY_NO_LABEL either a key in your package of dynamic resource.

  As for my last comment, I'm just pointing out that if you add your labels through JDeveloper UI (thanks to the tab of the UI data), JDeveloper might try to change your class code ListResource. Is why better do it manually, I think.

  Hope this helps,

  Florin

• Multiple result to attribute values

  We have a requirement where we find several rate amount of disk (c) for a given condition.
  
  The conditions are the customer's name and Dates.
  
  For a customer there can be several rate amount (c) drive there.
  
  for example
  
  Customer name Effective Date (c) drive amount perc
  CUST-A 20% JAN - MAR
  CUST-A 15% JAN - MAR
  CUST-A 10% JAN - DEC
  CUST - A MAR - DEC 5%
  
  
  And this way there could be several disk (c) amount rate given the date of the transaction. If the transaction date is saying in February, then we have three disk (c) 20, 15% and 10%. If the transaction is in MARCH, and then we have four lines 20, 15, 10 and 5. It can be potentially be any number of disk (c) amount rate effective lines for a given date. We want to show all these lines of amount of disk (c) in the invoice lines.
  
  How to model to make me any effective disk (c) amount lines?
  
  If I use excel to model the rule
  a. I'm not going to be able to compile if are repeated the same conditions. for example: -.
  Customer name Effective Date (c) drive amount perc
  CUST-A 20% JAN - MAR
  CUST-A 15% JAN - MAR
  
  b. also, the result would be only a single value.
  
  c. I can't have several attributes of the conclusion in the form of columns because like that I'm limiting disk number place (c) there are design time.
  
  Receive your answer.
  
  -Sreeram.H
  
  * strange spelling for disk (c) amount because of the spam filter set for the forum.

  Wow this spam filter is ridiculous. Diskount it out then.

  Rather than hardcode the diskounts in the rules, you can define an entity called "customer diskounts" with a separate instance for each diskount.

  You can then add a condition to each diskounts that indicates whether this particular diskounts applies to the current assessment:

  the customer diskounts is applicable if
  ...the customer name for the customer diskount = the customer name and
  ...the transaction date >= the customer diskount start date and
  ...the transaction date <= the customer diskount end date
  

  You can then use the various functions of Instance * if() to perform all the calculations. For example, to summarize the diskounts you can use:

  the transaction diskount = InstanceSumIf(the customer diskounts, the percentage of the customer diskount, the customer diskount is applicable)
  

• "Error 0xBFF69012 attribute value is out of range" for Point Grey Grasshopper2 GS2-GE-50S5M

  Try to get the camera above to work at MAX. Running on LabView 2010 SP1 with Vision Acquisition software August 2010.

  Errors illustrated: error 0xBFF69012 attribute value is out of range

  Camera works perfectly well on the supplied software advanced Grey. Point Grey Image Filter Driver installed. Turned off the Windows Firewall. Card (http://www.sonnettech.com/product/prestogigproec34.html) Ethernet supports Jumbo Frame.

  Read through the following measures without result:

  http://digital.NI.com/public.nsf/allkb/FCE7506A3AF7636C862576240072716D

  http://digital.NI.com/public.nsf/allkb/A0A1CE4704265BF2862578CA007A4CF8

  How will I know if there is a problem with the XML file?

  What are the possibilities that this device is not compatible with IMAQdx?

  Thank you.

  Problem solved in new firmware version 1.25.3 - 00.

  Contact Gray Point to this firmware.

• Using a value Boolean true to increment a counter

  Hello world

  I would like to make a simple counter that waits just until a value Boolean true is passed and account 1, then wait until it happened again and goes up to 2 and so on. Just a single increment each time a real rose. I'm sure it's pretty simple, but I had no luck so far.

  Who does not resemble a need for a secondary loop.  You can add code to this loop to analyze the data.  If you do the calculations to determine a true, you already do the job.  Instead of going out a real, just increment a value of a shift register it.  Saves the hassle of sending one real constant for another loop for updating a shift register.  Do not create excess code just to have more code.

• Find most common value in a table of enums

  Hello

  I'm looking for a stylish way to find most common value in a table of enums

  My being of enum:

  0 - close

  1 - open

  2 - undefined

  For example, if my table contains:

  Close, close, open, close, close, open.

  The most common value would be 'Closed'

  I created a very personalized VI which allows me to get the desired result, but I'm really not proud of doing it this way, just simply because I need to change if I add a new value to my enum...

  If anyone can share some ideas to enlighten me, I would REALLY appreciate it.

  Thanks in advance!

  I don't know, I'd go the yard road, to propose, he could save a single iteration since you know 0 is the first point of departure, but you then must deal with the determination of lengths and dealing with missing values that return-1, etc..

  If you really expect of very large tables, I would have moved my previous version which is supposed to be quick to write in another simple method of counting.

  

• How to display the different attribute value in the ToolTip of selectonechoice

  In the selectonechoice when hovering over the values in the drop-down list, it displays the same value in the ToolTip too. I want to see the value of another attribute in the ToolTip.

  For example if the list displays the name of the lov, ToolTip should show its description attribute value. I tried assigning a different value to shorDesc, but have no effect on the values of the ToolTip.

  

  < af:selectOneChoice value = "#{row.bindings.TfesNdx.inputValue} '"

  label = "#{row." Bindings.TfesNdx.label}.

  required = "#{bindings." ATfes.hints.TfesNdx.mandatory}.

  shortDesc = "#{bindings." ATfes.hints.TfesNdx.tooltip}"/ / changed it to shortDesc =" #{row.bindings.Notes.inputValue} "does not yet "

  ID = "soc17" autoSubmit = "true" >

  < f: selectItems value = "#{row.bindings.TfesNdx.items} '"

  ID = "si17" / >

  < / af:selectOneChoice >

  PS: Using 11.1.1.7.0 version adf

  You probably need property shortDesc on af:selectItem http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_selectItem.html

  For example, you can use af:forEach to make your items to select like in this blog post: http://learnfrommike.blogspot.com/2013/11/adf-using-selectonechoice-in-afiterator.html

  Dario

• executeQuery tent get/set a different attribute to a blob type attribute value

  Hi all

  I use the p9172975_R12_GENERIC patch file.

  I have a customized OPS page and he is required to include a few more fields to the page, among them the paid one is to facilitate the download and upload of a file.

  To achieve this upload of file, I use messagefileUpload point of style and I am able to successfully create the folder with the file that is being stored in the blob column.

  When I try to update the record, it gives the error below

  ""oracle.jbo.domain.DataCreationException: Houston-25009: failed to create an object of type: oracle.jbo.domain.BlobDomain with value: 81".

  Here the 81 value belongs to another attribute (a column of data type number). When I checked the table, attribute values are registered in their corresponding columns.

  The error occurs when vo.executeQurey is called.

  Could you help me with this problem?

  Thank you

  K. Kumar

  Hi Johny,

  After seeing your reply, I figured that it would be incompatible index attribute in the VORowImpl.java, but could not identify any incompatibility comes from the VORowImpl.java file.

  So, I deleted the original Version and it created again, to my surprise its works very well!

  Thanks for your help.

  See you soon

  K. Kumar

• ADF | Retriving of popup lov attribute value

  Hello

  JDev: 11.1.1.6.0

  I'm trying to select a popup lov attribute value, as well as another attribute value must store them on the corresponding fields.

  EX: when I select point id pop-up window in the table

  

  It displays popup and selecting a value of line to select the item id,

  

  When I select the product id to the value of time even product category to category, product description value description of the category in the table.

  as below

  

  give me suggestions for values

  Concerning

  Is it comes to lov based model, then you can assign several attributes of lov to several attributes of your ViewObject (in the editor where you describe lov).

  Dario

• Export xml attribute values

  Dear java expert,

  I was trying to export script attribute value to the .txt format. I have attached the screenshot for your reference.  Please me friends suggestion.

  

  I use the system: Mac, indesign Cs6.

  Thanks in advance to all

  Dear friends,

  I share my java coding below, based on this question.

  myDocument var = app.activeDocument;

  Var log = new File(app.activeDocument.filePath+"/log.html");

  log. Encoding = "UTF-8";

  log. Open ("w");

  log.writeln(")

  ");

  log.writeln(")

  ");

  FindEmail (myDocument);

  log.writeln(")

  Text (in the template)

  Found (Href tag)

  ");

  log. Close();

  Alert ("completed");

  function FindEmail (elm)

  {

  for (var i = 0; i)< elm.xmlelements.length;="">

  {

  XMLelementName = elm.xmlElements [i].markupTag.name.toString ();

  if(XMLelementName=="img")

  {

  for (j = 0; j

  {

  var cc = elm.xmlElements [i] .silence

  Alert (CC);

  var aa = elm.xmlElements [i] .xmlAttributes [j] .name

  if(AA=="src")

  {

  alert (aa);

  var BB = elm.xmlElements [i] .xmlAttributes [j] .value;

  log.writeln(")« + cc + »' + elm.xmlElements [i] .xmlAttributes [j] .value + ".");

  alert (cc + ' ~ ~ ' + aa + "~ ~" + bb);

  }

  }

  }

  FindEmail (elm.xmlElements [i]);

  }

  }

  Thank you