find if in the sequence editor API call

Similar Questions

• Unable connect to the sequence editor of

  Hello

  I seem to have something broken in my version of TestStand 4.2. When I run the sequence Editor starts in the logged out State.  When I click on Login... nothing happens.

  I think this may have something to do with process templates - I had installed a updated the SequenceModel.seq which has been altered by a co-developer and re-installed the original on it back because the updated process template wanted to access the components that I don't have on my computer (which is a sql database).  Anyway, since I did it, I can't have the logon dialog box to display.

  TIA

  Ron

  It is the reminder of the frontend, not the process model, which is responsible for implementing the connection/disconnection process.

  There should be two versions of the FrontEndCallbacks.seq file on your computer as follows:

  (1) in \TestStand 2010\Components\Callbacks\FrontEnd, this version here must have a sequence called LoginLogout

  (2) in \Components\Callbacks\FrontEnd, this version must be an empty sequence file.

  In addition, make sure that you do not have the station defined option to automatically open a session to the user of Windows System.

  Hope this helps,

  -Doug

• How to get taken time stated in the IO in the sequence editor?

  Hi all

  Is it possible to get the indicated default time NI Semiconductor Test Operator Interface OR in the sequence editor?

  

  Are there any expression in sequence editor that can get this time taken in the operator Interface?

  How can I include this time taken in the STDF generated by the transformation in the result sequence editor?

  Thank you

  Socket's operating time is stored in the TestResultsPropertyObject. To access this object is via the MainSequenceResult parameter in the Plugin model - USE fact entrypoint. The TS. TotalTime property records the total amount of time that required to run your test code MainSequence recall. It comes to the value included in the default reports.

  The OI shows the average decision-making time of execution of the whole lot, gets it from the Manager of semiconductor modules.

  I hope this helps.

• No icons shown in the sequence editor (Teststand 2014 Windows SP1 + 10)

  Hello

  I have the problem in the followig:

  After installation of Teststand 2014 SP1 on a computer Windows 10 empty, no icons are shown for the steps in the sequence editor. In addition, the breakpoints do not appear by clicking on the left side of the stage. Icons, which uses Teststand are in C:\Program NIUninstaller Instruments\TestStand directory 2014\Components\Icons, nothing is missing.

  Everyone knows the same problem?

  See you soon,.

  Roman

  

  Hey guys, so I finally found the solution to my problem: change the Format of the region of English (Europe) to English (United States). Thanks to Scott for an idea!

  I'm really curious to know what kind of bugs are hiding there, where Windows 10 meeting OR software

• Change the folder of default reports from outside the sequence editor

  Hello

  I want to set the path to the folder of the regular reports of TS (xml) outside the sequence editor, i.e. in a txt file. I would like to load this value in the sequence or the performance of model sequential (to read this file). Play with what I achieved only copy reports to different my folder both outside. No one knows how to correctly do this operation?

  See you soon,.

  K

  I have accomplished this setting the path of the report dynamically, using the ReportOptions reminder in my process model.

  I had set the following report options:

  Parameters.ReportOptions.DirectoryType = "SpecificDirectory".

  Parameters.ReportOptions.Directory = 'C:\\Program Files\\Functional Test\\Reports\\' + Parameters.UUT_PN

  Parameters.ReportOptions.BaseName = 'report '.

  Parameters.ReportOptions.UseFormatForExtension = TRUE

  Parameters.ReportOptions.Extension = «»

  Parameters.ReportOptions.ReportFilePath = «»

  Parameters.ReportOptions.NewFileNameForEachUUT = TRUE

  Parameters.ReportOptions.AddTimeAndDateToFileName = TRUE

  Parameters.ReportOptions.GeneratePath = TRUE

  arameters. ReportOptions.Format = "html".

  The second entry above, I set the directory based on the number of game USE which is analyzed by the operator.  So in your case, you will need to set the "Parameters.ReportOptions.Directory" item based on a path read you a text file.   According to the structure of your text, file, get the path of the report (from file) could be done in a few differnet ways...

  Thank you

  Paul Holzrichter

• Sequence number of version. How to change out the sequence editor?

  I would like to change the version number of sequence from outside the sequence. Is there way to this? Can I call TS engine of LV, and then using the APIs to make the change?

  I have to do this even without make no significant changes in the system to reflect the change of the configuration of the files to which speaks my sequence.

  Thank you.

  I have attached a file of sequence that does what you want.

  Is there a missing step to read the file.  You must call PropertyObjectFile.ReadFile after PropertyObjectFile.Path to load the existing.

  I ran your example and noticed that there is no wire error.  I also noticed that you were not from the Application or stopping handler.  It is possible, it's maybe part of the problem.  I get an error when you run your VI stating 'Access denied' when writing to the file. you get a similar error, but it does not appear.  I changed the path of the file sequence to be the absolute path, and now it works correctly.  I think you can get an error but because no thread error have been hung, it appeared as if there was no problem.  The path must be an absolute path for the PropertyObjectFile.Path property.

  -Allen P.

• How to add ID/batch number in the naming of the batch summary report and STD files generated by the sequence editor of

  Hello

  How to add an Id(which is inputted in the Configure Lot Setting) a lot in the naming of the batch summary and report STDF files generated by the Test Module of the semiconductor.

  Currently the default name is shown in the excerpt below

  

  Thank you

  Rovi

  Hi Rovi,

  Have you tried the recall of ConfigureLotSettings or some of the steps listed in Cusomizing behavior for batch parametersof edition?

  Kind regards

  John Gentile

  Engineering applications

  National Instruments

• Is there a way to reset displays step status for iterations of the successive loop (NOR with active follow-up sequence editor)

  I'm running a sequence in the sequence editor (single-pass) with active follow-up.  I find that when I get a section in my sequence loop, the displayed State of stage starts in white, is preparing for the first passage through each step of the loop, and the steps are displayed to this status, unless / until modified in a loop later.  I would prefer that the status of step back empty at the beginning of each iteration of the loop and then get / displayed when the step is completed (yet) in order to better show the progress through the wrist strap.  Is there a way to do this?

  Thank you Ray!

  I've attached an example of using the method suggested by Ray reference.

• Shift at the choice of the steps sequence editor

  Hello all-

  I run into a few problems these last time with the sequence editor (TS 4.1 / LV 8.6) where by selecting some of the steps will be literally up to 30 seconds to load (instead of dry normal 1 or 2)... it seems to affect niswitch associated steps most, but virtually all the measures seem to have a good time. It seems that this situation is aggravated if I shift-select many steps at a time - for example if I take 4 steps, he literally will pick up for 2 straight minutes before I can change the options for stage. Seqedit.exe takes 100% of the CPU during this time as well.

  I will add that I have in fact two identical configurations, and this affects only one of them...

  I think it's safe to assume that the sequence in fact probably one editor kind of research or something, but I expect that once the VI is loaded into memory (say niswitch.llb/connect channels), it would be fine for the rest of the time I spend editing... any advice on what exactly it is?

  other than this taking a lot of time, nothing is technically "broken" and my sequences work very well, but my development time is crazy now because I spend 80% of my time sitting to wait for the spring sequence editor to life!

  Thank you!

  -Kris

  If your screws have I/O controls connected to the connector component, you could be hitting the same problem described in this thread http://forums.ni.com/ni/board/message?board.id=330&thread.id=23845.  You may need to patch LabVIEW 8.6.

• Settings pane in the stage custom sequence editor

  I'm trying to implement a custom user interface that is similar to the examples given by NEITHER. What I miss, however, is the part of the parameters of the step. I can change the parameters of the step of the example with the Edit menu > settings step dialog box, but I would have a section on the window, similar to what you see in the full version. I thought it would be as easy as inserting a component to insert, but it is not... Did anyone have an example of the implementation of this component?

  Hi paicolman,

  At this time the property pane of the step in the sequence editor is built in editor sequence and, therefore, only available in the sequence editor not in the custom operator interface.

  The reason why one in the sequence editor looks different is because it is a more compact design, so it could easily fit into the sequence as a component editor and not another pop-up window. The OI is a pop-up window, so it shouldn't be so small and compact.

  If you want to change the step properties dialog box, you will need to completely build your own dialog box and change the reminder that connects the kind of command. It would be quite difficult to implement, so using the default dialog box is recommended.

  Greetings,

  Cheggers

• Details on the Limitation of the API calls

  Hi all

  I'm newbie to Eloqua API and have a few questions about that.

  
  

  1. What is the maximum No. API calls limit for SOAP and REST (especially for large API) per day?

  2. when we say limit maximum API calls, is for the specific user or instance Eloqua together?

  for example, a single user can call the ends of the API for 2,000 times per day the maximum number (may be that other users can call the same on this day).

  OR special Eloqua instance is limited to 2000 calls is the maximum that API calls for a day (without distinction of different users).

  Please specify.

  Thank you

  Ashok.

  Hey Ashok,

  See this document for more information on limits for the bulk API API limits.

  Other APIs, the daily, the limits are based on Eloqua topping:

  Basic - 20 000

  Standard - 100 000

  Company - 500 000

  These limits are per instance.

  I hope this helps!

  T.J.

• Parameters specified by step do not match the settings of the sequence

  I just upgraded from Teststand 4.1.1 to 4.2 and have encountered this

  problem during the review of the existing sequence files.

  When I open a file of sequence, select any stage of type sequence call, which calls another sous-séquence

  in a different sequence file, I learned that the parameters used do not correspond to those required.

  To be more precise, in the settings area of the stage, a red exclamation symbol appears at the side of the

  subsequence called step, and the ToolTip is displayed when the mouse pointer is

  hovered over the exclamation point States:

  "Parameters specified by the step do not match the settings of the sequence."

  The ToolTip goes on to explain how to solve this problem by clicking on the exclamation symbol.

  I find also that by deselecting the "Prototype using sequence" tab in step Settings\Module

  solves the problem.

  When the sequence is executed, no problems occur with execution, the test performs correctly.

  Is it possible to clear this error for each sequence call not in one operation?

  Thank you

  Gary.

  My apologies to attach a file of sequence buggy. I forgot to pass a parameter to the LoadPrototype method to preserve existing settings. I have attached a corrected version of the sequence file. I changed to update SequenceCall not only because of potential problems, reloading the DLL prototypes.

  I would try to explain why you see cela TestStand 4.2. The additional results feature, we added to TestStand 4.1 needs to know what parameters are entered, output and input/output (i.e. what settings is pass by reference). Before TestStand 4.1, step of calling sequence does not store this information but rather dynamically got it and it appears in the column how go. Now that we store the past by reference with the step option, you can have an inconsistency between the option stored in step and the current setting of the sequence called. This inconsistency affects only additional results and not execution. TestStand 4.1, the sequence editor to not warn you on these inconsistencies. We have added the TestStand 4.2 warning so that you will have the correct information for additional results.

  When TestStand 4.1 or 4.2 load a file of sequence from a pre-version 4.1 version, TestStand sets cervical optionally reference true for all parameters in the call sequence steps. This is why you see the warning for any sequence calling step created TestStand 3.5 If no parameters are not passing by reference. You can also see the problem if you change the option collar called a reference parameter in the sequence.

• When the sequence of process template client file is loaded for execution?

  As part of a custom process template I've created, I would like to make a few changes in the sequence of the client before file called by the process template. These changes will be then be restored after the loop finishes USE (I'm changing the sequential model).

  Another thread, I discovered that TestStand sequences cannot be edited structurally once they have been loaded for execution. My question is: what is client sequence template process ' for execution "?

  After some research, I discovered that the sequence of the client file is not locked to prevent changes to the sequence editor until the "Reminder of the main sequence" sequence step call runs in the model process entry point. At this stage, the sequence of the client file is loaded dynamically as the module at this stage.

  However, before this point, there are two places that the file of the client's sequence is used, and I want to assure you that they don't 'load the customer file for execution.  The Runstate.ProcessModelClient property is a reference to the object the client file SequenceFile and exist as soon as the entry point is called. In addition, the engine must know about the sequence of the client file to correctly call reminders of process model. Do any of these things make the movie of 'responsible for performance customer file?

  It boils down to this: can I do safely from the structural changes to my file of sequence of the client during the ProcessSetup and ProcessCleanup?

  According to the information I found in another post (see the comments of Eric_Crank on page 2), it is allowed. However, in this case customers were only make changes to the property Data of the RunState.ProcessModelClient. I want to assure you that I can use the TestStand API on the reference too.

  Also, just FYI, I got this works. I can add steps to the sequence MainSequence customer sequence file of the group stage of installation of the point of entry of the process model via the API TestStand. I ask here if make sure that it is a safe thing to do, and that there is nothing I plan not to.

  Thank you.

  Josh,

  If your sequence allows the option "optimize no concave calls this sequence", the first time the sequence run TestStand stores a copy of the execution of the sequence in a cache associated with running. As long as the sequence is in this cache you can not change, and TestStand considers that the sequence for 'run' file (see the SequenceFile.IsExecuting property). You cannot unload 'enforcement' sequence files (see SequenceFile.CanUnload). Sequences remain in the cache until it is closed. There is no way for you to remove the sequences of this cache, but you can prevent them to be added to the cache by turning off the option "optimize... ». Disabling this option should have no impact on the performance that you call the sequence only once.

  -Erik

• Fonts in Windows 10 sequence editor

  Hi all

  I hope that it is a question with a simple answer. I search nothing doesn't.

  I just upgraded to Windows 7 to 10 Windows on my development PC. I TestStand 2014 and TestStand 2010 SP1 to support existing applications, and both exhibit this behavior:

  Many fonts display correctly in the sequence editor, but the majority of them is annoyingly huge. (See attached screenshot)

  I tried the things:

  • Verification of the dialog box options of the sequence editor
  • Configuration of Windows properly. (No other applications don't have this problem, and our IT Department confirms it not miss anything obvious on the side of the BONE)
  • Edition SeqEdit.xml in \appdata\local\National Instruments\\SeqEdit.xml.  When I change the settings of police here they mysteriously get indented at the launch of the sequence editor of.

  Does anyone know where these parameters from and how to modify them for a correct display?

  (I feel really embarrassed if it's something simple)

  Thank you

  Jim

  Well, that's pretty funny.

  My cell phone rang, I would get up walk outside while you take the call. I have locked my PC and walked away.

  Five minutes later I came back and ostensibly, my PC crashed and has since restarted. (I found this out by watching the Windows event logs)

  Curiously, after the accident, my fonts appear normal in TestStand.

  I don't know what has changed – it could be one of the countless things, but it is "fixed" now. I wish I knew why.

  

  In the future, if anyone has questions of police, the solution is clearly to cause the OS to crash.

  Thanks for your help, Daniel.

  Jim

• Browse the sequence has stopped working

  I generated WebHelp output files on 19-11-14 (less than 2 weeks ago) in which the navigation sequence works as expected.  When I generated out today, I noticed that the navigation sequence buttons were not displayed.  I use 10 HR with IE 11.  I'm the only person who has access to the RoboHelp project for this project files.

  I checked the WebHelp project settings and noticed that the box "Activate browse sequence" was not checked.  I checked it.  I refreshed the project.  Now, the navigation buttons appear but remain disabled.  I used the sequence editor Browse to regenerate the sequence browse the table of contents.  He has not worked as planned.  Rather than follow the KNOCK sequence, he put all the books first level at the beginning of the navigation sequence, then all second level books and so on.  Anyway, I saved and regenerated the project.  The navigation buttons always appear, but he remained always disabled.  I used the sequence editor Browse regenerated again the sequence of navigation based on the table of contents by using the option to create browse sequences separate for each book to level 5 (just an arbitrary number).  HR, created a bunch of separate browse sequences.  I clicked on OK again and refreshed the project.  I still see disabled navigation buttons, and I tried clicking on multiple subjects in different books to see if all separate browse sequences worked.  The navigation buttons are left disabled.

  I saw HR previous posts on this topic.  I saw the post Julietta Curtis' sequence to browse not working in IE 10 but working in Chrome and Firefox.  I opened in Chrome and Firefox, the latest two versions of the WebHelp I generated; same results as IE 11 - disabled browse buttons.  I opened the WebHelp from 19/11/14 in Chrome and Firefox; the navigation sequence works very well.

  Note: I tried also to regenerate the project using the project. Record of the prior process - including BRS. Files BRS dating back to 10/29/14.

  Any thoughts on how to get the navigation sequence works again?  Thank you!

  I assumed you meant setting up a project pod > Windows > [webhelp window] > properties.  Then I discovered there are two places in the SSL associated with browse sequences.

  There are therefore two actions, you need to take to use a browse sequence.

  1 allow to browse to the output sequences.

  2 specify browse sequence you want to use (you must do this even if you have only currently).

  Where I think you have to do is the second step. You can find it in the SSL under content categories > content. (if you use categories of content, you may have to define for each of them, I guess.)

  

  The word 2013 and RH10, forums indicate that while 2013 is not supported by RH10, by using the right-click > Generate on your print Documentation SSL should allow you to generate the printed output. But some people have failed to get this working, so your mileage may vary. 2013 on Robohelp 10 support Office