Find several occurrence of a dynamic string using RegExp?

Similar Questions

• How can I find several duplicate files and remove the using Windows Explorer

  Somehow I see several duplicate on my computer files.  I can tell when they arrived as all the duplicate files ' _10-Mar-15_1. ' " However, I don't know how they arrived.  I think that Google Drive was the culprit, but I can't be sure.

  How we (me) use Windows Explorer to find all files with "_10-Mar-15_1." and delete them all?

  I am using Windows 7 64 bit

  Thank you!!!

  Windows Explorer can do no such thing. To remove recursively a certain file is easy - see below. To identify duplicates and remove some of them is much more difficult, because:

  • Are two files duplicates because
    -They have the same name?
    -They are the same size?
    -They have the same file date?
    -They have the same content?
    -Everything above?
  • When they are, which ones should be deleted?
    -The oldest?
    -The most recent?
    -The batch?

  Here's how to remove a certain file to recursively. Assume that they are in the folder "C:\Users\BHunter\Documents".

  1. Click the start planet.
  2. Type cmd. exe and press ENTER.
  3. Enter the following command and press ENTER:
     dir/s/b/p 'C:\Users\BHunter\Documents\_10-Mar-15_1 '.
     This will show you all the files whose name above.
  4. del /s /q "C:\Users\BHunter\Documents\_10-Mar-15_1."
     This will permanently delete all files with the name above. You cannot restore them.

• find if get date and time string function is used in my labview vi

  Hi, I am trying to understand a labview project and wanted to determine if the DATE STRING function / hour GET is used in VI. This VI has many void too / vi... I know that we can find all instances of all indicator etc... but I can also do something like this to find all the functions of DATE STRING / hour GET used?

  Hi Claudia AG

  Open the block diagram of the main vi, press 'Ctrl + F' and select 'object '. See image below

  

• I find several pages open at the same time when I try to open certain bookmarks in the subject: home page.is this destiny? but this behavior is intermittent

  I find several pages simultaneously open in firefox when I try to open a link in the bookmarks stored. It is divide the subject: homepage in two and simultaneous display of two pages.
  I really like this. But this feature is planned.
  I find this intermittent behavior and not happening for all the links.
  If firefox has a feature to open several windows as it's going to be great other than the separator add on

  Opening in the sidebar is the default value for the bookmarks created via a link or a button on a Web site.
  
  You can view the properties of a bookmark using the context menu in the side bar (Ctrl + B; Command + B on Mac).
  
  In the Bookmark Manager (Bookmarks > show all bookmarks) you can click on the button more in the lower details pane on the right.
  
  Make sure "Load this bookmark in the sidebar" is not selected.

• Pavilion dv6t-7000: impossible to find several drivers for my PC?

  Hello, I'm having a problem to find several drivers I need for support of USB devices, until quite recently, my device manager showed I had three drivers I need to install it, but after checking the drivers they are not found. This includes the drivers PCI, Serial Bus controller and network controller drivers. I installed the driver of player Realtek card and for some reason the PCI and Serial Bus controller drivers seem to be installed, but the network controller driver is still missing.

  The hardware ID for the network controller driver is:

  PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086 & REV_C4
  PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086
  PCI\VEN_8086 & DEV_0887 & CC_028000
  PCI\VEN_8086 & DEV_0887 & CC_0280

  Where can I find the drivers for it? Thank you.

  Hello:

  You need this driver for this model wireless card...

  This package contains the required drivers to activate the adapter functionality taken on laptops Intel wireless LAN supported with supported operating systems.

  File name: sp57976.exe

  If you want the latest version of the driver for this card, download and install the second pilot on the list...

  https://Downloadcenter.Intel.com/download/24652/Intel-PROSet-Wireless-software-and-drivers-for-Windows-7-

  This card also comes with bluetooth, you need driver bluetooth for this too.

  You can use the Intel one since the dv6t-7000 support page, but I'm providing the latest driver from Intel.

  https://Downloadcenter.Intel.com/download/24847/Intel-PROSet-Wireless-software-for-Bluetooth-technology-for-Windows-7-64-bit-WP-

• Find all occurrences of a term, through multiple Word documents and examine each instance in its local context (i.e. extracted)

  Hi all

  I'm looking for an easy way to find all occurrences of a term, through multiple Word documents and review of each instance of the word in its local context (i.e. extracted) without having to open each document.

  For example, if I want to search the term "religious atmosphere", the search results would be something like:

  Paper 22: '.. '. but the religious atmosphere had not evolved to the point where... »

  Paper 22: "...". not that the religious atmosphere was still too controversial for a settlement... »

  Document 35: "...". If anything, the religious atmosphere was still little developed for a city... »

  Document 35: "...". it in no way improve the religious atmosphere until the decision was... »

  Paper 42: '.. '. up to - what point, the religious atmosphere was very collegial with all the elements of... »

  Any Microsoft or utility 3 rd-party which can put each instance-by-side and in a context extract would be a real, real help!

  Any ideas?

  Thank you

  Jay

  Ken is perhaps more familiar with the Agent Ransack, I am, but a quick check she finds every instance of a string of text and shows the term in the context of a single line subject to the following:

  • At the end of the search, a list of the files found is accompanied by some statistics.
  • If you select one of the files found, each 'hit' for this file is displayed in the context of a single line.  In other words, you get a list of hits in context as in your original question.  Instead, you get a list of, say, 42 documents and then if you have selected the Document 22, you will see:
    • «.. but the religious atmosphere had not evolved to the point where... »
    • «.. . not that the religious atmosphere was still too controversial for a settlement... »
  • The display of content seems to work with OK * .doc, *.docx and files *.pdf; not so many other types of files - even if it looks for text in all kinds of other files.

  Agent Ransack is free.  Download and try it.  If you don't like, just uninstall.

• Several entries of the dynamic map (policies of the phase 2) on SAA

  Hi all

  I have a setup where I set up VPN remotely on my ASA. I came to a situation where I wanted to allow the two IPSEC client using cisco VPN client and android phone using L2TP/IPSEC

  What is happening is that I want to use PFS for IPSEC clients, but my android phone does not support this. Then I tried to create two sequences in my dynamic crypto map, but the first sequence is always put in correspondence and therefore ike phase2 fails. If I put the sequence without PFS first, he will be first, and my client IPSEC uses both PFS...

  If I remove the PFS, fine.

  So is there a way either the AoA match to multiples of phase 2 policy, I mean not only several transform set in the same order, but also for pfs in my case.

  My L2TP client using authentication rsa - sig and are dynamically mapped to a tunnel-group, so I thought maybe we can specify map entries different crypto depending on the authentication method, but it seems that the only option that we linked to this is for card crypto inherited, where we can choose the trustpoint for outbound connections.

  So if anyone has an idea, I would be interested, otherwise, I guess I can leave without PFS...

  Unfortunately not with PFS, as part of the overall transformation (for example: ESP-3DES, etc) then you can set several transformation under 1 dynamic map. However, not for PFS that you only have 1 option either turn or off as PFS is optional.

• Removed USB controllers: can not return - "this device cannot find enough free resources that it can use. (Code 12)

  Original title: removed USB controllers: can not return

  Hello

  So today I tried to connect to a printer, and it wouldn't work (separate the issue, I don't want to worry about that now)

  I've seen several messages saying: you need to uninstall the USB controllers in Device Manager and then restart your PC. The pilots would then automatically reinstalled.

  It didn't happen, and now my Dell touch screen does not work. I can miss several other USB controllers too, I uninstalled about 3 of them, but I don't know whether or not it has been reinstalled.

  I currently have:

  -Hub USB generic

  -Enhanced host controller USB Intel (R) 8 series #1-9C 26

  -USB root hub

  -Host controller compatible xHCI USB

  Note that the last of them was a symbol of error on it and reads as follows:

  "This device cannot find enough free resources that it can use. (Code 12)

  If you want to use this device, you will need to disable one of the other devices on this system. »

  Can someone please tell me how much USB controllers I should have and how to save them?

  Thank you very much

  Hi Shalini.

  Thanks for the reply, but if you read through the posts on this thread, I think you will find that it has already been suggested that I do these two things - what I've done many times without result.

  Fortunately, I managed to fix it myself.

  To satisfy your curiosity and help someone else who could see this thread with a similar problem, here are the steps I took finally solve the problem:

  ______________________________________________

  I was always convinced that the problem is basically with the xHCI USB controller that I saw always reported as not working not properly in the device (Code 12) Manager. With this in mind, I set out to see if I could determine what the device was supposed to be in conflict with. I ran msinfo32 and began to examine the conflicts/sharing section. After a while, I decided I could not see anything obviously problematic or direct me to the controller xHCI, so I gave up on that front.

  Well, if I couldn't fix the problem with the current installation, maybe that I could find another way to install the xHCI USB controller that could circumvent the flaw that seems to be caused when windows reinstalls automatically it when restarting after the abduction. So I started trying to learn more about this "xHCI USB controller" - since Googling this term has given no end of problems not related.

  In Device Manager, I found a way to isolate the details of this driver in device (somewhere under the properties I believe) Manager. This has created a custom device showing in view only a select few connects the Manager. I have spent some time in the analysis of these and found the time during which the camera has stopped working properly. Suddenly a pattern emerges. Over and over again, see you the following series of when I was hoping that allowing windows to reinstall automatically the driver would to fix:
  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 has been removed

  [Rebooted PC]

  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 has been configured
  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 had a problem starting.

  Under each newspaper was referring to a driver name, I didn't already had access to: driver name: usbxhci.inf

  Now I got some new information about the xHCI USB controller, I took to Google. After much research (and not find something relevant), I found 2 obscure references to the driver who seemed at least somewhat relevant.
  The first reference has been a post on the forum where someone's USB ports stopped working. very similar problem to mine! There is little of any particular use in the nets, with the exception of the reference to a couple of windows updates: KB 2823516 or KB2822241

  It is not clear exactly what usbxhci.inf capacity was tied to these updates, but I made a note of them and moved.

  Another article contained no mention of specific ports USB not working does not and was centered around a different problem entirely. However, he has mentioned an another windows update: KB2919355-x 64.msu

  This one (as I remember) was clearer on the relationship between the update and changes to the usbxhci.inf file.

  Now, I had three updates which could make changes to usbxhci.inf at one point. With their name on a piece of paper, I started looking through my updates installed to see which ones I had installed. I soon discovered that Ko 2823516 or KB2822241 were not present on my PC, which saved the penalty to guess who would be the right to uninstall first.

  KB2919355 has been installed, and I made the decision to uninstall it, because as far as I knew, this update changed something in usbxhci.inf. After the initial uninstall was completed, but before the mandatory reboot for changes to take effect, I went into Device Manager and removed the xHCI USB... because I was afraid that if the new, "defective" was always present during the reinstallation of the update, it doesn't change anything.

  The device is removed once more, I rebooted the system. He drives for a considerable period, uninstall the update and then seems to have some sort of hitch; declare something in the sense of "we could not complete the operation. Changes to undo. " He stayed like that for a while before the system became operational again and began to "prepare windows. Once it was over, I discovered that my touchscreen and USB ports worked very well.

  Investigation later showed that the compatible USB xHCI host controller was is no longer marked with warnings. In addition, a series of USB controllers appeared that had not been there when the xHCI device was defective. I was also pleased to note that the update of windows for KB2919355 had already been reinstalled without messing up anything.

  _________________________________________________

• REGEXP_REPLACE how to loop through the occurrences of a text string variables

  Hello

  I use a 11.g Oracle procedure. I found an example of REGEXP_REPLACE with only two arguments (input and model) and created a procedure based on this example. The Replace function works, but not optimally. I try to use REGEXP_REPLACE to loop on a variable number of occurrences of a text string in a local variable of CLOB.  The string occurs after the text base64 (base64 comma) and before the text "/ > (double quote space oblique superior - only)."  I can do replace it work for a single occurrence, but I can't do it properly in a loop.  These embedded strings include images that were inserted in a rich Apex text field.  This is a rich text field is assigned to the CLOB p_html.

  Declare p_html clob;
  l_image_clob clob;
  l_image_count number;
Begin
p_html := '<p>Some header text base64,one start here and then this is the end one" /></p><p>Some header text base64,two start here and then this is the end two" /></p>';
l_image_count := REGEXP_COUNT(p_html, 'base64', 1, 'i');
If l_image_count > 0 Then
  For i In 1..l_image_count Loop
  l_image_clob := REGEXP_REPLACE(p_html, '(.*base64,)|(" />.*)');
  dbms_output.put_line(l_image_clob);
  -- code to process each occurrence individually.
  End Loop;
End If;
End;

  What I would like to see results of the data are:

  tenure here and that's the end

  two beginning here and that's the end of two

  The results I get are:

  two beginning here and that's the end of two

  two beginning here and that's the end of two

  Thanks a lot for watching this.

  Hello

  From Oracle 11.1, REGEXP_SUBSTR is better than REGEXP_REPLACE for this sort of thing.

  What produces the output you asked for:

  Declare

  CLOB p_html;

  CLOB l_image_clob;

  number of l_image_count;

  Begin

  p_html: = '

  ' Some header text base64, start here and then it's the end "/ >

  Some header text base64, two start here and then it's the end of two"/ >

  ';

  l_image_count: = REGEXP_COUNT (p_html, 'base64', 1, 'i');

  If l_image_count > 0 Then

  For i In 1... l_image_count loop

  l_image_clob: = REGEXP_SUBSTR (p_html )

  , "base64,(.*?)" / > "

  1

  , I - letter i (loop variable), not number 1

  , 'i'

  1

  );

  dbms_output.put_line (l_image_clob);

  -code to treat each case individually.

  End loop;

  End If;

  End;

  /

  The 4th argument to REGEXP_SUBSTR specifies where desired appearance (starting with 1).

  The 6th argument is a backreference. 1 means you want to return all that match the expression starting with the 1st '('. gauche)

• Hello. I have Lightroom 3. The only addition I've ever done is to add a plugin of double Finder several years ago. No, all of a sudden I can no longer download photos as usual. I need to deceive Lightroom by downloading by adding new files into folders an

  Hello. I have Lightroom 3. The only addition I've ever done is to add a plugin of double Finder several years ago. No, all of a sudden I can no longer download photos as usual. I need to deceive Lightroom by downloading by adding new files into folders and then synchronize these folders. But lately this work around is not no longer works. Is the program, forcing me to upgrade? Can I continue to use this version. I need to reset something. Please help because it is very frustrating.
  Thank you!
  Emily

  PDF, GIF and BMP are not the types of files supported for Lightroom.

  See here: help Lightroom | Supported file formats

  However, there is a plugin available that will allow you at least these files from the catalog, it is called Anyfile: any Lightroom Plugin file

  Bruce

• Dynamic site using Paypal

  Can anyone recommend a tutorial that will help me set up a dynamic site using Paypal?

  I have some - although not much - experience with php and mySql and have put in place of the simple sites using Paypal buttons - I really want to learn to combine the two.  I have trouble finding what I understand on the site of Paypal and Googling, it evokes such a quantity of tutorials (mostly obsolete) I don't know where to start.

  Thank you

  Hello

  I have some - although not much - experience with php and mySql and have put in place of the simple sites using the Paypal buttons

  Create your site as you would for any other dynamic site but with an extra column in your table, place the code for your paypal button in this column.

  Follow links to any graphic for buttons when you paste the code.

  PZ

• 2 running, 1 inside and 1 sql external, dynamic queries using loops and ref Cursor

  Hi all
  
  I'm under Oracle 10.2.0.2. I'm currently building dynamic sql using external and internal queries ref Cursor. Queries make use of user selected lists of ID, which is stored in a table in memory at run time. My example is as follows. From a list of book_publication_id on a web page, the user selects several books. The same user selects then several maps from a list of map_publication_id on the same web page. A book contains several maps and some of these cards will appear in more than one book (aka many many relationships).
  
  This should then ask the following output to a new web page:

  Outer loop:  Display book details for book_publication_id 230
    Inner loop:  Display 1st map details for map_publication_id 340
    Inner loop:  Display 2nd map details for map_publication_id 346
    Inner loop:  Display 3rd map details for map_publication_id 350
  Outer loop:  Display book details for book_publication_id 240
    Inner loop:  Display 1st map details for map_publication_id 346
    Inner loop:  Display 2nd map details for map_publication_id 375
  Outer loop:  Display book details for id 255
  and so on.

  In the example above, the outer loop displays the details of the book for book_publication_id 230 and the inner loop displays all the users selected the maps in book_publication_id 230. Then, it moves on the details of the book for book_publication_id 240 and done the same thing again. Similar in some ways to how break would work in SQL * Plus, even if the table is built like an HTML, the book details must be on a separate line for the card details. However I don't know how I would want it to work.
  
  So far, using loops, I could not show all the details of card for each different book_publication_id, after the details of the book for only 1 book_publication_id are displayed each time. If a loop in a loop. I hope that makes sense. I think this is my internal request that it be built differently. My code for this part of the program, which is currently wrong, is as follows:

  --Global variable section contains:
  var_user_chosen_map_list_ids VARCHAR2(32767);
  var_details VARCHAR2(32767);
  ......
  PROCEDURE PROCMAPSEARCH (par_user_chosen_map_list_ids PKG_ARR_MAPS.ARR_MAP_LIST)
  IS
  BEGIN
  FOR rec_user_chosen_map_list_ids IN 1 .. par_user_chosen_map_list_ids.count
  LOOP
     var_user_chosen_map_list_ids := var_user_chosen_map_list_ids || 
     '''' || 
     par_user_chosen_map_list_ids(rec_user_chosen_map_list_ids) || 
     ''',' ;
  END LOOP;
   var_user_chosen_map_list_ids := substr(var_user_chosen_map_list_ids,
                                          1, 
                                          length(var_user_chosen_map_list_ids)-1);
  var_details := FUNCMAPDATAFIND (var_user_chosen_map_list_ids);
  htp.print(var_details);
  END PROCMAPSEARCH;
  FUNCTION FUNCMAPDETAILS (par_user_chosen_map_list_ids IN VARCHAR2(32767)
  RETURN VARCHAR2
  AS
  TYPE cur_type_map IS REF CURSOR;
  cur_book_search cur_type_map;
  var_book_date NUMBER(4);
  var_book_title VARCHAR2(32767);
  cur_map_search cur_type_map;
  var_map_date NUMBER(4);
  var_map_title VARCHAR2(32767);
  begin:
  OPEN cur_book_search FOR
  'SELECT BI.book_date,
          BT.book_title
   FROM   BOOK_INFO BI,
          BOOK_TITLE BT,
          TABLE (sys.dbms_debug_vc2coll(' || par_user_chosen_book_list_ids || ')) BL_1
   WHERE BI.book_title_id = BT.book_title_id
   AND BI.book_publication_id = BL_1.column_value';
  OPEN cur_map_search FOR
  'SELECT MI.map_date,
         MT.map_title
  FROM map_info MI,
       map_title MT,
       TABLE (sys.dbms_debug_vc2coll(' || par_user_chosen_book_list_ids || ')) BL_2
       TABLE (sys.dbms_debug_vc2coll(' || par_user_chosen_map_list_ids || ')) ML
  WHERE MI.map_title_id = MT.map_title_id
  AND BI.book_publication_id = BL_2.column_value
  AND BI.book_publication_id = MI.pub_publication_id
  AND MI.map_publication_id = ML.column_value';
  LOOP
  LOOP
  FETCH cur_map_compare INTO
  var_book_date,
  var_book_title;
  var_details
  var_details := var_details || 'Book date: '||
                      var_book_date ||
                      'Book title: ' ||
                      var_book_title;
  FETCH cur_map_compare INTO
  var_map_date,
  var_map_title;
  var_details := var_details || 'Map date: '||
                      var_map_date ||
                      'Map title: ' ||
                      var_map_title
  EXIT WHEN cur_book_compare%NOTFOUND;
  END LOOP;
  EXIT WHEN cur_map_compare%NOTFOUND;
  END LOOP;
  RETURN var_details;
  END FUNCMAPDETAILS;

  If anyone has any ideas or suggestions, I would be grateful. It is an extension of my previous code, I posted a question recently. As I am working and learning a step at a time, I left this idea in my previous question, that I had to make sure I knew that first.
  
  Kind regards
  
  Tim

  Using dynamic SQL

  declare
    dd sys_refcursor;
    ee sys_refcursor;
    d dept%rowtype ;
    e emp%rowtype ;
  begin
  open dd for 'select * from dept' ;
  loop
  fetch dd into d ;
  exit when dd%notfound ;
  dbms_output.put_line('Department:'||d.dname);
    open ee for 'select * from emp where deptno='||d.deptno ;
    loop
    fetch ee into e ;
    exit when ee%notfound ;
    dbms_output.put_line('..Employee:'||e.empno||':'||e.ename);
    end loop;
  end loop ;
  end ;
  /
  Department:ACCOUNTING
  ..Employee:7782:CLARK
  ..Employee:7839:KING
  ..Employee:7934:MILLER
  Department:RESEARCH
  ..Employee:7369:SMITH
  ..Employee:7566:JONES
  ..Employee:7788:SCOTT
  ..Employee:7876:ADAMS
  ..Employee:7902:FORD
  Department:SALES
  ..Employee:7499:ALLEN
  ..Employee:7521:WARD
  ..Employee:7654:MARTIN
  ..Employee:7698:BLAKE
  ..Employee:7844:TURNER
  ..Employee:7900:JAMES
  Department:OPERATIONS
  
  PL/SQL procedure successfully completed.
  

  HTH

  SS

• How can I find out what version of firefox I use

  How can I find out what version of firefox I use

  https://support.Mozilla.org/en-us/KB/find-what-version-Firefox-you-are-using

  Left thread Firefox Android for Firefox section.

• How to find out what the police are actually using Firefox?

  How to find out what the police are actually using Firefox?
  Inspect the element don't say what substitute fonts.

  Firefox 24 ESR has the tab fonts in the Inspector, which shouldn't be a problem.

  • https://developer.Mozilla.org/Tools/Page_Inspector

• During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it?

  During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it? Edit

  These windows display ads? They could be 'pop-under' designed to show when you are finished with your main window. Orbitz has these, for example. Irritating. I'm not sure of the best solution, i.e., advertising blocker blocker vs.

  If they are not ads, can you think anyway that they are related to the sites you visit?

  In addition, to close a tab (or window, if there is only one tab), you can press Ctrl + w. could speed up the process of their release until you find a real solution.