Find special DML on a table

Similar Questions

• BlackBerry Smartphones Runtime error "Cannot find system in the file table.

  I need help!

  I have a Blackberry Curve 8310 and have recently installed Version 4.5

  I'm trying to set my synchronization.  I followed the steps to set up my Outlook 2007 calendar.  He told me congratulations! You have configured the product. However, when I press Finish, I get a runtime error "cannot find system in the file table.

  I uninstalled the program and reinstalled - the same error.

  Any help would be appreciated!

  FIGURED IT OUT!

  The following steps, which are displayed on the RIM support will work; However, I had to do it another way.  In step 1, it says that ilxolkCompanion.fil is located in the path C:\Program Research In Motion\BlackBerry\Connectors\MS Outlook Connector... However, when I searched this file, it was actually located in C:\Program Files\Blackberry\Connectors\MS Outlook Connector.  (Maybe it's because I upgraded from 4.2.2 to 4.5 w/o filling a clean uninstall... not too sure why)

  Once I located the file via the command prompt, I have not recorded in accordance with the instructions of step 1.  I then followed step 2 exactly Word for Word... and VOILA!  I have now Version 4.5, working with MS Outlook 2007

  Resolution

  If the connectors folder is always present in C\Program Research In Motion\BlackBerry\Connectors\MS Outlook Connector, follow these steps:

  1. Unregister the old of the Microsoft Outlook ilxolkCompanion.filconnector.
     1. Open the command prompt.
     2. Navigate to C:\Program research in Motion\BlackBerry\Connectors\MS Outlook Connector.
     3. Type command regsvr32 u ilxolkCompanion.fil.
     4. In Desktop Manager, Microsoft Outlook is no longer appears as an available desktop application.
  2. Save the latest Microsoft Outlook Connector.
     1. Navigate to C:\Program research in Motion\BlackBerry\IS71 Connectors\MS Outlook Connector.
     2. Type the command regsvr32 msoutlookconnector.fil.
     3. Office Manager, Microsoft Outlook will be now stored as an available desktop application.

  Once these steps have been completed, configure synchronization again.

• Find special characters in the name of the Image

  Hi all

  Request:

  1. the need to find special characters or unwanted characters in the name of links (Figure$ .eps, abcd? cde.jpeg etc.)

  2. the name links allows only [a - z] or [A - Z] or [0-9]

  3. name links does not allow special characters such as (i.e.,?,!, @, $ etc...)

  4. white space not allowed

  Very urgent request...

  Try the Code is:

  var myLinks = app.documents[0].links.everyItem().getElements();
  alert(myLinks.length)
  
  for(i=0; i<myLinks.length; i++)
  {
      var mySplit = myLinks[i].name.split(".");
      var myFinal = mySplit[0];
      
      for(k=0; k<myFinal.length; k++)
      {
          if(String(myFinal[k]).match(/[a-z]/g) !=null || String(myFinal[k]).match(/[A-Z]/g) !=null || String(myFinal[k]).match(/[0-9]/) !=null )
          {
              alert(myFinal);
              break;
              }
          
          }
      }
  

  Thanks in advance

  Siraj

  Hi Siraj

  Try this out

  var myLinks = app.documents[0].links.everyItem().getElements(),
      badCharReg = /[^A-z0-9]/g,
      l = myLinks.length,
      badLinks = [],
      linkName = "";
  while (l--) {
      linkName = myLinks[l].name.split(".")[0];
      if (badCharReg.test(linkName)) badLinks.push(linkName);
  }
  if (badLinks.length) alert("Check out these\n"+badLinks.join("\n"));
  else alert("Have a nice day");
  

  Trevor

• How to find the size of the table?

  Hi all

  Can anyone suggest how to find the size of the table? I had a few (15272 selected lines) on the name of "CMPT_" How can I check only 'CMPT_' size tables?

  
  

  
  

  
  

  
  

  Please someone help give the SQL query to run.

  
  

  Thanks in advance.

  
  

  Vincent
  

  madala03 wrote:

  Hi thanks for the reply

  I'm out like below

  SUM(BYTES/1024/1024)

  --------------------

  25383.25

  But how to check all the name of tables CMPT and their sizes?

  Select nom_segment, dba_Segments sum(bytes/1024/1024) where nom_segment like ' % CMPT GROUP BY nom_segment;

• Find the name and the table constraint type based on the name of the field

  I have a field name or a column with me... I want to find the name of the table is a primary key... Any request to make this work so that the running costs are low...

  Currently, I mix dba_constraints and ALL_TAB_COLUMNS to get this... is possible to extract the data of a process cost effective single table/any other is appreciated

  You must include the USER/ALL_CONSTRAINTS with USER/ALL_CONS_COLUMNS to achieve your desired results. For your specific condition, you can try this query.

  Select constraint_name

  column_name

  de)

  Select c.constraint_name

  cc.column_name

  count on column_count (c.constraint_name score) (cc.column_name)

  from user_constraints c

  Join user_cons_columns cc

  on c.constraint_name = cc.constraint_name

  where constraint_type = 'P '.

  )

  where column_name = 'EMPNO '.

  and column_count = 1;

  I used USER_CONSTRAINTS and USER_CONS_COLUMNS. If you use ALL or DBA dictionary table add join OWNER condition as well.

• Oracle 11.2 - perform parallel DML on a table that is not partitioned with LOB column

  Hello

  Since I wanted to demonstrate the new enhancements of Oracle 12 c on SECUREFICHIERS, I tried to use PDML declarations on a table that is not partitioned with LOB column, in Oracle 11 g and Oracle 12 c releases. The Oracle 11.2 SECUREFICHIERS and large objects Developer Guide January 2013 said clearly:

  Parallel execution of the following DML operations on tables with LOB columns is supported. These operations performed in parallel run only mode when it is run on a partitioned table. The DML statements on tables not partitioned with LOB columns continue to run in serial execution mode.

  • INSERT SELECT AS
  • CREATE TABLE AS SELECT
  • DELETE
  • UPDATE
  • MERGE (conditionally UPDATE and INSERT)
  • Multi-table INSERT

  So, I created and filled a simple table with a BLOB column:

  SQL> CREATE TABLE T1 (A BLOB);
  Table created.
  

  Then, I tried to see the execution of a parallel ABOLITION plan:

  SQL> EXPLAIN PLAN FOR
    2  delete /*+parallel (t1,8) */ from t1;
  
  Explained.
  

  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Plan hash value: 3718066193
  
  -------------------------------------------------------------------------------------------------------
  | Id  | Operation             | Name     | Rows  | Cost (%CPU)| Time     |    TQ  |IN-OUT| PQ Distrib |
  -------------------------------------------------------------------------------------------------------
  |   0 | DELETE STATEMENT      |          |  2048 |     2   (0)| 00:00:01 |        |      |            |
  |   1 |  DELETE               | T1       |       |            |          |        |      |            |
  |   2 |   PX COORDINATOR      |          |       |            |          |        |      |            |
  |   3 |    PX SEND QC (RANDOM)| :TQ10000 |  2048 |     2   (0)| 00:00:01 |  Q1,00 | P->S | QC (RAND)  |
  |   4 |     PX BLOCK ITERATOR |          |  2048 |     2   (0)| 00:00:01 |  Q1,00 | PCWC |            |
  |   5 |      TABLE ACCESS FULL| T1       |  2048 |     2   (0)| 00:00:01 |  Q1,00 | PCWP |            |
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  -------------------------------------------------------------------------------------------------------
  
  Note
  -----
     - dynamic sampling used for this statement (level=2)
  

  And I ended up executing the statement.

  SQL> commit;
  Commit complete.
  
  SQL> alter session enable parallel dml;
  Session altered.
  
  SQL> delete /*+parallel (t1,8) */ from t1;
  2048 rows deleted.
  

  As we can see, the statement was executed in parallel:

  SQL> select * from v$pq_sesstat;
  
  STATISTIC                      LAST_QUERY SESSION_TOTAL
  ------------------------------ ---------- -------------
  Queries Parallelized                    1             1
  DML Parallelized                        0             0
  DDL Parallelized                        0             0
  DFO Trees                               1             1
  Server Threads                          5             0
  Allocation Height                       5             0
  Allocation Width                        1             0
  Local Msgs Sent                        55            55
  Distr Msgs Sent                         0             0
  Local Msgs Recv'd                      55            55
  Distr Msgs Recv'd                       0             0
  
  11 rows selected.
  

  Is this normal? It is not supposed to be supported on Oracle 11 g with no partitioned table containing the LOB column...

  Thank you for your help.

  Michael

  Hello

  The explain plan shows that only the query is run in parallel but not delete it.

  Concerning

  Maurice

• How to find null values in the table

  Hi experts,
  
  my version is oracledb10g:
  
  I am doubted simple.
  
  for example:
  
  create table ex1 (e varchar2 (20));
  
  Insert ex1 (null).
  
  insert into ex1 (e)
  
  number of will be: 2
  
  I can easily find the value "e".
  
  so my question is:
  
  How can I find null values in the table and I want to remove the null values from the table.

  ADF 7 wrote:
  Hi experts,

  my version is oracledb10g:

  I am doubted simple.

  for example:

  create table ex1 (e varchar2 (20));

  Insert ex1 (null).

  insert into ex1 (e)

  number of will be: 2

  It depends on what you expect. If you issue count (*) you ask Oracle "how many lines there. If you issue a County () you ask Oracle 'how non null values for are there. "

  ADF 7 wrote:

  I can easily find the value "e".

  so my question is:

  How can I find null values in the table and I want to remove the null values from the table.

  delete from 
  where  is null;
  

  Ideally you would simply place a NOT NULL constraint on the column in question, thus prohibiting NULL values into the system (assuming that your business needs, it is that the column MUST always have a value).

• How to find the relationship between the tables

  Hello
  I am working in Oracle R12
  
  How to find the relationship between these tables INV_MIN_MAX_TEMP, po_requisition_lines_all and Per_all_people_f
  
  These two tables, I joined with po_requisition_lines_all and Per_all_people_f To_person_id of PO and anyone HR table but I can't able to join this table with other tables INV_MIN_MAX_TEMP
  
  concerning
  Srikkanth

  solved

• help to find a reference to a table

  Hello
  
  
  My verion of oracle: oracle 10G
  
  If I pull a query something like:
  
  Select * from user_source, where the text as 'CLASSIFICATION %.
  
  He will return me lines and helping me refine my search on a simple 100 lines to find a reference to a table called "WC_CLASSIFICATION_D" and tells me to say what all the packages have a reference for this table. But the thing is its letting me know for a particular user, now lets say if I have about 20 users in my database, with each single user written some packages containing the reference to the same table, how do I know which.
  
  PS: I hope I'm clear with my question, I'll have a feeling, is that there will be a table tht can contain the username for the entire database... Help, please
  
  Concerning
  Rahul

  Better yet, DBA_SOURCE (if you have access).

  USER_SOURCE contains the source for all objects in PL/SQL, owned by the current user.
  ALL_SOURCE contains the source for all PL/SQL objects for which the current user has at least some privileges. (Well, there's a requriement of privilege so that it can be seen here, it may be more subtle than my statement of 'at least some privileges'.)
  DBA_SOURCE contains the source for all PL/SQL objects in the database.

  This convention of naming/privilege is used for most of the SYS catalog views (USER_TABLES, USER_OBJECTS, etc..)
  Each user has access to views USER_ and ALL_ views, but different users may see different content. DBA_ views are generally not public; you have need of a privilege for example SELECT ANY DICTIONARY to see.

  Furthermore, USER_SOURCE doesn't have the source view or materialized views. Use USER_VIEWS and USER_MVIEWS if those you need.

• Find special characters

  Hello
  I have a table which has got a customer detail field have only numbers and the alpahbets is to say a to z, A to Z, 0 to 9. However, due to the fault of typing, there are some special characters entered in this field.
  How can I find all the lines with special character in this area. y at - it a function or an easy way to do it. I use the version of oracle 10g.
  
  Thanks for your help.
  
  Rgds,
  Sharan.

  user REGEXP_LIKE

  select * from  where regexp_like(, '[^[[:alnum:]]]*')
  

• Find a value in a table

  Hi, I'm trying to find the index of a value in a table, I know that it is a VI called 'research in a 1 d table' but there is my problem: Let's say I'm looking the value 25 and in my series of measurement, there like 24.998 and 25.001 but not 25, this VI will not find the value 25 although he went close enough , so basically I try to inplanta a tolerance system making it able to find with precision +-3 or 4 on the index, doing someone something for this?

  Thanks for your time

  I wrote this for a similar job, but it could be used for your application.  Just use the vi attached in a loop to check "in range" and returns the index of the loop of the first occurrence.

  Hope this helps

  Ken

• find the closest value in table

  Hi all

  I need to find the values in the "C" line which is equal or close to the values 'A' in the 2D array, and then I want to show the values of 'B', corresponding to the values of 'C' in table 2D.

  How can I fix it?

  Thank you!

  

  0.9967 nearest value is 0.993807 in the 8 Cand in row B row, not 1. The differences are 2.893E - 3 and 3.300E - 3.

  Subtract each value from the table C. take the absolute value of the difference. To find the index of at least using Max & Min value of B. Using autoindexing array Index, create the output array.

  Lynn

• A special selection of the table of Boolean

  I use Labview to prepare to use with AB CompactLogix PLC HMI. The problem for me is that I cannot select a bit special (for example to connect with a button, TRUE/FALSE) in an array of Boolean. What I can do is get a particular tag data (integer type Double) plc using OPC and convert these data into array of Boolean. The table can be represented by a series of 32 buttons (I use a card of entry type 32 PLC input fields). But I want to access only the bit 4 of table boolean and toggle an LED based on its output. How to do this? Help, please!

  Leave the data type as a U32 and use the following code:

  

  1 must be of type U32.

  That should do it.

  Play with this idea, also explore GOLD and XOR actions on U32.

  Tone

• Haw to find the element in the table that appears only once

  I have a table like this 2d:

  1 2 3 4 5 0

  5 6 2 4 7 2

  8 3 6 0 9 4

  5 6 7 7 3 2

  And I need to find items that appear only once in this table

  In this case, 8 and 9

  I also need this elements (row and column) position

  Are integers

  I tried to remodel the table and use the find but no result.

  Your best bet is to remodel a table 1 d do your seaching and use 'Quotient & rest' to convert location (index) in the table 1 d back to the index in table 2D. Use "Array Size" to get the number of rows and columns of the table 2D.

  The histogram only works on 1 d arrays.

  Or reshape a 1 d table. For each digit (0-9), use 'Search 1 D Array' twice. If the first 'search' finds a match (does not =-1), use the offset to start the 2nd search beyond the 1st index discovery. If 2nd 'search' returns-1, then one and the SAME time happens

  The index of the first 'search' to calculate the index (Quotient & rest") line and collar of the 2D array.

• How can I find the subset of a table that corresponds to a set of conditions/conditions?

  I have often encountered this problem in LabVIEW, probably the result of my Matlab based thinking on the tables. Suppose I have a 1 d array that consists of a real number between 0 and 2 (for example):

  1.3 0.1 1.9 0.7 1.4 1.5 1.5 0.8 1.3 0.3 1.4 1.4 0.1 0.6 0.1 0.2 1.6 1.6 1.4 0.6 0.1 1.9

  and I want to know the average of the subset of values greater than 0.5 and less than 1.2:

  average ([0.8 0.7 0.6 0.6]) = 0.6750.

  How can I find the subset of the array that satisfies the condition > 0.5 &<1.2>

  For your example (values between 0.5 and 2) If you wish:

  

  I would do something like this:

  

  I have generated just a table of 10 random numbers between 0.0 and 2.0

  The following loop sorts the data, using "range and force."
  It then displays the data in the selected range.

  The last step is to take the average

  I have attached the VI if you do not want to use the code.