Find the folder missing - does not work. Help, please!

Someone had this problem? It drives me crazy. Any time I rename or move a folder and try to use the option 'Find the missing folder' it does not show one of my hard drives! It has been like that, through several updates of LR. I continued to pray that the next version of lightroom would fix this, but so far no luck.

Type in 'file' the path correct or simply "C:\". "

Tags: Photoshop Lightroom

Similar Questions

HP pavilion dv9925nr sound does not work help please

Hi I have a hp pavilion dv9925nr laptop and I spent in Windows XP pro and now the sound does not work and iv tried everything iv downloaded all the drivers on the internet and everyone simply goes on to say: no driver no has been supported in this package and its driving me crazy please can someone help before I just use it to target paratactic

Hello:

Then I recommend that you follow the instructions in the guide to the link I posted above.

After you install the MS UAA driver, you may need to install the audio driver updated the posted on this link:

Conexant High Definition SmartAudio 221 drivers (ModelC700, Vx5xx series and dvx5xx and ABOVE )

Pilot modded by silver here

Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
Not to connect, install from a list or specific location,
Select don't search, I will choose the driver to install.
For the hardware Type select 'show all devices '.
Remove control "Show compatible hardware" and click on 'disk '.
Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
Ignore XP when he complains, Reboot.

If none of this works, try to reinstall XP and start from scratch. If you do not see your appliance an audio controller if you reinstall XP, then more than likely it is a hardware failure of the audio chip.

Paul

My application get Windows 10 does not work HELP Please

1 - my get app Windows 10 does not work. Whenever I try to run your PC compatibility check it says:

The report is not available now, you can always book your upgrade when it's time to start the upgrade we will run another report to make sure that your PC works with Windows 10

2. when I click on view Confirmation it Says:

YOUR UPGRADE IS RESERVED

There is nothing you need to do now, you will receive a notification on your PC when windows 10 is ready to install.

and it been like this for 4 weeks and nothing happened what should I do to check if the applications on windows 7 runs on windows 10 or not and start the upgrade to windows 10

Please help thanks

Download the media creation tool

Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

Note: How to check if you are downloaded or installed the update Windows 10 November

How to create an ISO or USB drive.

Select upgrade this PC now and then click Next

or

Task of pre-required

When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

Video games Harry Potter DVD does not work: help, please?

Recently bought Harry Potter and the order of the Phoenix and Harry Potter and the half-blood DVD games Prince video (new) EA.

Running OS X 10.11.5 on a mid-2010 iMac 27 "i5 quad cord 2.86 Ghz/20 G of RAM (ATI Radeon HD 5750 1024 MB) machine and none will load correctly, or run.

No idea why? Games two spec Mac Intel-chipped...

Ready to get all these ongoing enforcement for my daughter...

Thank you!

Not sure where you bought them, but they're going on 10 years and not likely to run on El Capitan.

Firefox 6 is a disaster, not only the google toolbar does not work but also yahoo toolbar

I've updated to firefox 6 and now my yahoo toolbar does not work. It was first the google toolbar is not compatible with firefox 5 now the yahoo toolbar does not work HELP?

See this - http://help.yahoo.com/l/us/yahoo/toolbar/toolbar2ff/troubleshootff/;_ylt=Akw3jVWwVDlujfQI3kFVqduJsHdG

Check and tell if you are able to solve the problem.

my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

Step 1

VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

Step 2

When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:
```
/Library/LaunchDaemons
```
In the Finder, select

Go ▹ go to the folder...

from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

Step 3

In the LaunchDaemons folder, there may be one or more files with the name of this form:

com Apple.something.plist

When something is a random string, without the letters, different in each case.

Note that the name consists of four words separated by dots. Typical examples are:

com Apple.builins.plist

com Apple.cereng.plist

com Apple.nysgar.plist

There may be one or more items with a name of the form:

com.something.plist

Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

These names consist of three words separated by dots. Typical examples are:

com.semifasciaUpd.plist

com.ubuiling.plist

Sometimes there are items (usually not more than one) with the name of this form:

com.something .net - preferences.plist

This name consists of four words (the third hyphen) separated by periods. Typical example:

com.jangly .net - preferences.plist

Drag all items in the basket. You may be prompted for administrator login password.

Restart the computer and empty the trash.

Examples of legitimate files located in the same folder:

com.apple.FinalCutServer.fcsvr_ldsd.plist

com Apple.Installer.osmessagetracing.plist

com Apple.Qmaster.qmasterd.plist

com Apple.aelwriter.plist

com Apple.SERVERD.plist

com Tether.plist

The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

Step 4

Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

▹ Safari preferences... ▹ General

and click on

Set on the current Page

If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

Step 5

The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

Step 6

This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

My DVD player does not work and all the information I can find is "this device does not work correctly.

Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

Hello

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
entries that do not fix the resolution of problems and those who "could" be the cause.

Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.

Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
Parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

to refine my question. The Lasso tool does not work. When I select the content aware lasso shrinks and nothing changes. Help please.

to refine my question. The Lasso tool does not work. When I select the content aware lasso shrinks and nothing changes. Help please.

A simple reset will often be the case if a tool becomes awkward. Go to this link, then select the lasso tool:

Difficulty of tool

offline activation code how can I get a when the site getactivated does not work? MSG: failed to process your request. Please try again later. Help!

Activation code offline - how to do when the site: getactivated does not work? MSG: Failed to process your request. Please try again later. Help!

Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
Don't forget to stay signed with your Adobe ID before accessing the link below

Creative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html

I just bought the teachers edition and Creative Cloud student (one year) and I'm unable to install After Effects. He always says: the trial version has expired. I tried to uninstall and install again, but it does not work. Please help me.

I just bought the teachers edition and Creative Cloud student (one year) and I'm unable to install After Effects. He always says: the trial version has expired. I tried to uninstall and install again, but it does not work. Please help me.

See if the following can help:

Creative Cloud applications unexpectedly back in the test mode. CS6, CCM

https://helpx.Adobe.com/Creative-Suite/KB/trial--1-launch.html

Log, activation, or connection errors. CS5.5 and later, Acrobat DC

https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

Re Windows XP: At the opening of the hearts, the window is very small. How can I increase the window to fill the screen. Double click on the top panel does not work.

Re Windows XP: At the opening of the hearts, the window is very small. How can I increase the window to fill the screen. Double click on the top panel does not work.

Hi Rosa,.

The size of the window for Hearts is actually design in Windows XP.

However, there is a solution. You can follow these steps:

Step 1

a. first of all, copy the game.

b. click Start, all programs, games.

c. right-click on the game of hearts .

d. Select Properties from the list.

e. press the button find the target on the next window.

f. right click on the highlighted file and select copy.

g. then paste the copy on your desktop.

h. right click on your desktop.

i. Select Paste from the list.

Step 2

Finally, we will change the resolution for the game setting:

a. right click on the game you just pasted on your desktop.

b. Select Properties from the list and click the Compatibility tab.

c. put the check box marked "run in 640 x 480 screen resolution.

d. now whenever you want to play, click on that game on your desktop and it opens in mode full screen using the widest possible cards and numbers.

Hope the helps of information.

Have key but the installation media does not work

OS came with the laptop, now the recovery disk does not work so I just the key but not the medium to install it. Please tell me what to do? Really need my laptop!

Contact the vendor for a replacement drive.

Why do you think you need to re - install Windows?

If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
My Blog

The scan button does not work on Windows XP Media Center edition 2005

Name of the printer: hp psc 1350 all-in-one

Hi, this is happened since I reinstalled the operating system with an OEM disc, removing all the hp stuff. I got a new OEM drive that comes from hp (I think... well hp stuff works now) but the scan button does not always work. The old record was kind broken.

I don't mind, but it will be useful, if it could be repaired. Don't want to do something big, would rather just not fix that to do something does not.

Note: Scanning works, but I have to look somewhere else (e.g. opening scan in the Panel)

OK, that explains why the scan button does not work.

The complete software is required for the scan button to work, it is not a feature of the base software.

Be sure to follow the steps below in order to get is torted:
1. Unplug the USB from the printer.
2. On the start menu, enter the HP folder. and follow the link to uninstall to remove the current software.
3. If you don't find it there, go into control panel > add or remove programs, and remove any software installed HP PSC 1300 series.
4. Download and install the full feature below:
  http://ftp.HP.com/pub/softlib/software10/COL8901/MP-23606-3/gc_w01_ENU_NB.exe
5. You will find the Director of HP under the HP software. If you have problems using it, make sure you install the following hotfix:
  http://ftp.HP.com/pub/softlib/software8/COL17377/OJ-46104-1/CIT207355-HPCOM-patch-V8.exe
Kind regards

Shlomi

MyCD Rom does not work help!

In Device Manager it sayes windows cannot load device for theis hardware drivers. The driver may be corrupted or missing. (code39) I uninstalled and unplugged the computer and when I plugged it back in and turned on it says please consult the manufacturer of your device to help get this device installed I have no ideal what I do to help someone! I did everything I know!

Hello

Please make all below even if you have done some before as it is often the set of operations which solves
the question.

Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.

Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

--------------------------------------------------------------

Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Hope these helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

"There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

Please try the troubleshooting below to check the status of the shadow copy Volume service

1. click on start > all programs > Accessories > run

Type the following text in the run window, and then click ok:

Services.msc

You will get the Services window.

2. Please check service Volume shadow copy service is "started" and "automatic".

If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
On the window properties, please change the startup type to automatic, and use the Start button to start the service.

Click on apply, click ok.

Close the Services window

Restart the computer and check if the problem occurs again.

If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

I hope this helps
If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Find the folder missing - does not work. Help, please!

Similar Questions

Maybe you are looking for