Find the mouse pointer

Similar Questions

• The mouse pointer went crazy on NB100

  Started a download on the iTunes store, came back 30 minutes later to find my mouse pointer jump erratically in the vertical direction. Had to disable the synaptics pointing device driver and plug a USB mouse. After having rebooted and restart the mouse driver seems to work for most still until today where it does the same thing.

  If anyone else has experienced this? I came to the conclusion that the touchpad and keyboard on this device are just very poor indeed.

  Hello

  I never had a problem with my touchpad. I have to say that everything is working properly and also an external mouse/keyboard.

  Anyway, in your case, I would try reinstalling the driver for the touchpad, or have you tried it already? You can directly download the driver from Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Also, you should also try to reinstall iTunes. Maybe it s causing this problem

• Tecra S1: Move the mouse pointer

  From time to time my mouse pointer moves slowly upward or sideways. This happens once anchored and when not docked. In the latter case, I have an external mouse not attached.

  This problem is really annoying, especially when you try to hit a box for example.

  Any ideas?

  See you soon

  seasack

  Hi seasack

  If you use the pointer internal (the stick between GH and B), it is very common that the ca of pointer starts to move.
  The reason is a bit technical but very understandable.
  The mouse pointer works like a small joystick. Means that it is that you push forward, down, sideways and so on. However, please check the HOUSE or 0-position from time to time. When you're not, this would be a normal position of the HOUSE for us but it doesn't.
  It is therefore possible that it may be wrong to believe that the position of the HOUSE is when you push forward.
  If you stand and do not change the position of the needle for (I think) 2 separate controls the position of the HOUSE, this position will then be the new post HOME until the next time he finds another.
  Actual cases is not that extreme, of course, but more normal cases are that you bend your finger on the pointer when for example reading something on the screen. The pointer can recognize as a small boost, and if you do go, then he could have a new position of the HOUSE and start to drift or it could be "heavy" feeling in a certain direction.
  The solution? Simple! Leave it on for about 5 seconds and it will go away.

  If you have this problem, even if your not even using the pointer, then I guess you have a hardware problem.
  Try disabling the internal mouse by pressing FN + F9.

  Good luck

  Tom

• The mouse pointer behaves erratically

  Original title: the mouse pointer

  FOR SOME TIME MY MOUSE POINTER STARTS GOING BONKERS, BEGINS TO BLINK. SOMEONE CAN ME SAY WHY? PLEASE... NORMA JEAN THOMPSON

  Hi Norma Jean.

  Welcome to the Microsoft community where you can find all the answers related to Windows. I'll definitely try and help you get the mouse to work, however if the problem is with the device, you may have to contact the hardware manufacturer.

  Could you also give us some more information?

  1. have you installed the drivers for the mouse?

  2. you have any antivirus installed on the computer program?

  3. What is the brand and model of the printer?

  4. are you aware of any recent software or hardware on the computer changes?

  You can change the setting of the mouse and check if it helps.

  Although article apply to Microsoft hardware, you can also go through the Manual steps in and check if it helps.

  Hope this information was helpful and let us know if you need help in the future about Windows. We will be happy to help you.

• The mouse pointer at work turns blue after the connection of the House

  Greetings, every weekend our computers at work are automatically restarted. I just Monday and my mouse pointer is blue sky! Well, easy to put back, but why is this happening?     To reproduce the problem: Reboot Windows box at work. Do not connect! The remote access connection from the Mac must be the first login after the reboot.  Go home.  Home: 20 "iMac running OS X 10.6.8 run Cisco AnyConnect VPN Client v2.5.3055 on iMac, connect to the VPN.  Run MS RDC for Mac on the Mac.  Connect to the Windows computer at work, which is running XP SP3 Professional v5.1 home.  Do normal stuff.  Sign out of DRC.  Disconnect the VPN.  Go to work.  Open a session.  The mouse pointer is blue instead of Standard Windows! If I use Windows inverted, the mouse pointer is changed to be transparent with black outline.     ***?     I tried looking on the Net occasionally and either get to sites that tell me how to get a blue arrow or how to use a.     No, this isn't a big problem, but I'm very curious to know why this happens.     Thank you!     AEF

  Hello

  The question you posted would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/da-DK/w7itpronetworking/threads

• Question/the mouse pointer while playing music

  When I play music or through Media Player or Stream on Acer Aspire 17.3 "4 GB 8.1 Windows laptop and move the pointer of the mouse while the music plays music drags or glitches while the mouse pointer moves, but will stop if I stop moving.   Any ideas on how to solve this problem?

  try to install this:

  http://global-download.Acer.com/GDFiles/driver/AMT/AMT_Intel_10.0.30.1054_W81x64_A.zip?acerid=635567...

  or try this:

  CTRL-Alt-Del to load the Task Manager
  Search in the background process to find "Intel (r) technology access Service."
  Right click and choose "end task".

• the mouse pointer popup

  Is there a way to disable the information boxes that appear whenever the mouse pointer is over a clickable element? For example: in internet explorer, my favorites... when I move the pointer of the mouse on a favorite, a small box will open with the information on the web page in it or as on the top of these pages where it says vista Assistant... If I point to him a box opens with 'Wizard of Vista' inside. Thank you

  Hi MDonaghy,

  Welcome to the Microsoft community newsgroups.

  To disable or enable Popups of ToolTip for items in Windows Vista, follow the steps below:

  1. in the start search box, type regedit

  2. scroll through HKEY_CURRENT_USER > software > Microsoft > Windows > CurrentVersion > Explorer > advanced

  3. you will see a list of entries. Locate ShowInfoTip FolderContentsInfoTip, StartButtonBalloonTip. Click on edit and set the dword value to 00000000 for each entry (to undo the same set value of 00000001)

  4. scroll HKEY_LOCAL_MACHINE > Software > Microsoft > Windows > CurrentVersion > Explorer > advanced

  5. Repeat step 3

  6. exit and reboot.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Let me know if it works. Good luck!

  Hope this information is useful.

  Thank you and best regards,

  KKS Vijay

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Open submenus when I stop on them with the mouse pointer does not work

  I used to use Vista Upgrade of XP until it hit the big time. With this installation, the option 'Open submenus when I dwell on them with the mouse pointer' worked perfectly well.  Since I did a format and installed the full installation of Vista version, and now this feature does not work. I checked and re-checked the option in the customization of the menu star and nothing. Also unable to find what anyone at the mouse settings itself.

  Does anyone know how to get this feature to work again once it's something I use a lot.

  Concerning

  Owen

  Hello

  If none of these help or you find a solution please report.

  Does work here on Vista either, but I don't want it works even if it is checked.

  Try UnChecking the start - Customize - Menu tab apply / OK and then go back and save
  Apply / OK.

  If no joy this initiative will eventually.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------

  Maybe something here: [check Control Panel - mouse or TouchPad (as applicable)]

  If a mouse (or if you use a touch screen and a mouse)

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Single click to open an item - APPLY / OK

  Control Panel - mouse - look for hover or click Automatic similar settings according to your mouse.

  When a TouchPad

  Look in the Notification area next to the clock for all TouchPad control program.

  Control Panel - mouse - also look for it TouchPad (mine is on the device however settings tab
  other brands and maybe on the other tabs and more than one). There are usually the parameters that
  can determine if a click, double click, hover or can open or close a program.

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Single click to open an item - APPLY / OK

  If some people are well positioned can change to some other setting if you plan to leave
  them that way and then change again.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Stop the mouse pointer to show more of Windows Media Center

  Original title: Windows Media Center

  Hello

  Is there a way to stop the mouse pointer to show more of Windows Media Center, other than moving it?

  I note that adobe flash player can do it in a web page, then why not an 'entire' application such as Windows Media Center?

  Thank you

  Hi hiphoppoprock,

  In Windows Mode, the pointer in Windows Media center is designed to be displayed.

  In order to have the pointer automatically disappear you need to change the Mode full screen.

  You can see the Feedback forum to leave a comment or suggestion about the present:

  https://connect.Microsoft.com/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Change in focus of the window with the mouse pointer

  On one of my computers when the mouse pointer moves to another window the focus switches to this window.  But this does not happen on my other machine.  Where can I find the setting for this?

  Start > Control Panel > easy access > easy access Center > make the mouse easier to use > check Activate a window by hovering over it with the mouse

• Second the mouse pointer to the center of the screen of Windows 8 (office and metro) - Sony VaioT Ultrabook

  After a few updates MSFT uncontrolled or without reason, the boot of Win8 poster now the gray circle or circle with the mouse pointer in the Center on the login screen of the touch screen. Try moving the pointer with touchpad shows second pointer, and the original remains flashing in the Center. By connecting to the Metro interface, the cursor of the Center remains in the Center, and it is possible to move subway tiles by dragging the screen.

  When you go to the office, the pointer to the Center rest sometimes, sometimes disappears; When there, open and close the Task Manager without doing anything he removes the unwanted pointer. When removing the additional pointer in the Center, office does not respond to tap and double tap. and does not show the rectangle of the area of selection, as he usually did. However, the touch screen digitizer apparently works as the key, and touch multi-touch show shadows in the points of contact. It also allows to scroll the text in the browsers to slide the touch screen. But the zoom and the valves do not work.
  I also noticed that a few seconds after that the Office will appear on the screen, the touchscreen works as he used before (look and work area selection), but they stop working after 3-4 seconds and you can only take account of the points of contact and scroll the text in browsers (no resizing)...
  Device Manager displays the digitizer as 'USB input device' USB\VID_04F3 & PID_0018; It is impossible to find the name of the vendor or update the driver. The device also creates objects of device HID four children. The digitizer can be stopped and restarted from the Device Manager; upon restart, the Center pointer appears again, or a white square is displayed. Touch the place goes the arrow-shaped pointer in the gray circle of key indicator in the center of the screen. Open and close the Task Manager remove the pointer from the Center.
  Sometimes, when you move a pointer 'true' with the touchpad as the arrow in the Center pointer is replaced by a helping hand or cheek two arrows.
  It seems that there is an application or a service that loads with office and seizes 'touch down' messages, do not let them be served by gui. However, I don't find anything unusual in starting programs or services; Virus scan shows that the machine is clean.
  I thought it might be a ClassicShell likely to interfere, but removing it does not change the behavior. Neither the removal of all the utilities of the startup list startup.
  It is a software problem, suggestions, which could bring him or how to find the root cause of the problem are appreciated.
  I saw a similar description of the behavior on the forums of Sony, but there was no resolution.

  FIXED! My laptop had this problem from day one.  I found a thread where some people had fixed it by going into the properties of the mouse and two enabling paths (shortest path setting was OK and barely perceptible) or by changing the standard display cursor to enlarged (or black).  But this does NOT work for me.  Here's what worked completely:

  I turned off the touch screen.  Who needs him--it was a stupid idea of Windows 8, in any case, and the compromise to solve this question "cursor ghost" was worth WAY.

  Go to Device Manager.  Under Interface devices, there are 2 lines for input USB device.  (If there is more, temporarily disconnect the receiver wireless mouse or another USB input device).  Disable the first, one in right-clicked on it and selecting Disable.  And the problem is GONE!  I hope this helps.

  Maybe the screen had a defect that makes act like an invisible finger relying on, or more likely, it's a Windows 8 bug affecting some machines.  In any case, it's a huge relief to see it fixed, because the cell phone was horrible, when this happened.  Good luck!

• The mouse pointer is not displayed in Windows 8.

  original title: 8 the mouse pointer disappears NOT associated with the applications screen

  Windows 8 64-bit running on TORDRE of Lenovo tablet 3347CTO with external monitors.

  Sometimes, the mouse pointer disappears from the office.  He is always there, because I can find it by pressing CTRL (I have "use CTRL to locate mice" clicked to fix somewhere).  It will activate a program if the invisible pointer is on the icon for this program.  It reappears when you move, but only when moving.  I'm going behind the screen applications (starting) to do this. As I know it has nothing to do with any specific program.  Only way to recover is to restart the computer.  It's extremely annoying, any suggestions would be most appreciated.

  I fell right on the problem.

  Use the Windows key + P to pass between the double screen and return to the single screen mode and returns the pointer.

  Play with the mouse settings did not help.  I think it's a problem of display driver.

  Hope this helps others.

• WIN8 - no desktop, black screen with the mouse pointer. Manager tasks and the login screen work.

  As usual I left my computer and after a few minutes, he fell asleep. Next morning, I had moved to the mouse, computer wakes, but I got a black screen with the mouse pointer. I hit CTRL + Alt + Delete and screen with Task Manager option appeared. I stop computer and rebooted. Welcome screen and logon is displayed. After you enter the password and click on submit that the screen becomes black with only the pointer visible mouse. I don't have not installed anything recently. Can you help me find my office?

  OK, I had the same problem. I thought that if you have a pointer and can launch Manager tasks and all programs through its file > new task, then the hull works correctly. No office and no taskbar mean that something is wrong with explorer.exe. Now, he has corrupted not necessarily, may not properly launched.

  Here's what I did:

  1. I opened the Task Manager, the Details tab

  2. I killed all explorer.exe on the list

  3. just to be safe, I also tried to kill dwm.exe but it will be may not be necessary (it never goes away)

  4. I started the new instance of explorer.exe via file > run

  And voila, I had the desktop and the taskbar.

  It will be useful.

• Escape the mouse pointer when you press the space bar

  My tecra has developed a problem where whenever I press the space bar, the mouse pointer out of the screen and the mobile guard in the upper right or sometimes down left for about 30 seconds then stops. happens in all weather conditions of applications that I use an optical mouse or the touchpad

  Hi Dave

  I had the same problem. Initially, the mouse was mad for 30 seconds, but shortly after, it was worse. I switched the keyboard and now everything is ok.

  Of course, the pointer of the mouse was defective. I'm sure that in your case the problem is the same.

  Good luck!

• Can not see the mouse pointer

  Whenever I go to a program like WoW or Media Center, my mouse becomes invisible. I can always click on things and move it, I can't see the pointer! I saw a question asking pretty much the same thing, but it did not help me at all the... I also noticed that I can not only see the pointer when I fullscreen, however I can't get full screen sometimes.

  Hi Roxas72,

  Turn off the mouse pointer trails and check if you are able to access the mouse pointer in Windows media center.

  (a) open mouse by clicking the Start button, click Control Panel, clicking hardware, and then clicking the mouse

  (b) on the Pointer Options tab, uncheck 'Display pointer trails.

  (c) click on OK to save the settings.

  See the links below for the Wow game and try the steps.

  http://forums.worldofwarcraft.com/thread.html?TopicId=24401852177&SID=1

  http://forums.worldofwarcraft.com/thread.html?TopicId=2967988341&SID=1

  More support on the game Wow post your query in the forums of game and check.

  http://forums.worldofwarcraft.com/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.