The mouse pointer at work turns blue after the connection of the House

Similar Questions

• Satellite C660 - the mouse pointer stops working when you start program

  Some features:
  Toshiba Satellite C660-1r1
  Windows 7 sp1
  Avast Antivirus (free version)

  Problem:
  When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs! When I go into Device Manager, my synaptic touchpad and my hid mouse is working also. When I press ctrl - alt - del, the pointer can move again, but when I come back it stops again. I have a work around is not a solution

  When I disconnect my windows account and log in again, it will solve the problem. When I start a program again the pointer will freeze up again.
  I did a complete system of virusscan and a pre start virusscan and my laptop is virus-free.
  I uninstalled the mouse and in drivers reinstalled synaptics them but that has not worked. I added a new account windows but that did not work.
  By pressing the keycombo FN + F9 has no effect.
  I am somehow at the end of my ideas...

  Can anyone help!

  When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs!

  This problem happens using the touchpad only or have you noticed the freezing of cursor using the external USB mouse too?

  What is the notebooks touchpad works properly without loading and using this 3rd party software?
  For example, work the touchpad with Microsoft office (Word, Excel, etc.) or navigation in internet by using IE or Chrome?

  My guess is that the pre-installed 3rd application part could affect the functionality of the touchpad.

• In LR CC why have black pixels to the point, began to turn blue?

  This has only started happening recently - when photo editing, black areas 'darkest' of the image starts to turn to the blue pixels. This means that the image requires further editing. THS happens on newly imported photos and on those previously published - who, until recently, did not have the blue pixels?

  The blue overlay shows the shadow cutting. Press J to turn it off.

  An overlay in red shows the highlight clipping.

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• Do not turn the mouse pointer in one hand. Why?

  Hello!

  Why, when I do a (adding an action to a symbol) button, the mouse pointer doesn't turn into a helping hand, when I put the key?

  And how to fix it?

  Thank you

  You can set the cursor of the mouse for a symbol or element by using the mouse cursor option in the properties panel.

  

  I think that the addition of that action will not turn a div for the tag button.

• Windows Vista - blank screen with only the mouse pointer at the start - tried everything

  My laptop (Dell Latitude E6500) stopped recently begin correctly recently - one morning, he froze connection so I powered it off and then on again. When he started to I only got a backlit black screen with a mouse pointer - nothing works, clicking or Ctrl Alt Delete.

  So far I have tried the following:
  • Dell Diagnostics tool - no problems found
  • Safe mode - the same thing happens in all modes of security
  • Restore the system using CD of Vista - no restore point
  • Repair the system using the Vista CD - no error
  • Essentially, nothing to do with the Vista CD solved the problem, so I tried the forums

  • I tried to rename the "Logs_bad" event logs and by creating a new "Log" folder in windows\system32\winevt\ - does not set it
  • "I renamed' software ' to 'software_bad' in windows\system32\config\ and 'software_previous' in 'software', as suggested Mr. Bakir in http://www.nuonsoft.com/blog/2009/05/02/possible-ksod-black-screen-of-death-solution-for-windows-vista/, but it did not work.
  • I also tried a few things with Regedit but not had any luck with doing work again.
  • I tried the trick of "StickyKeys" discussed on many forums, but this does not work - I had turned it off or the computer is not grateful for entry; I do not know
  • I copied explorer.exe working copies, taskmgr.exe and winlogon.exe from a broken computer work computer, it did not resolve anything.
  Are there solutions more I can try? There must be something I can replace/remove/change in order to get Starter beyond this point where is seems to 'block '.
  Install a fresh windows isn't really a preferred option.
  Any help would be much appreciated

  Hello

  ·         At what stage of startup you get this black screen?

  I suggest to refer to the link below and check if it helps to resolve the issue.

  http://support.Microsoft.com/kb/977675

  If you have not used the repair which is a system repair option in Windows vista start DVD, you can use it and check if the problem persists.

  To open the Startup Repair refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  For more information about the Startup Repair, refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I hope that helps!

• Keyboard and touchpad not working not not after reboot. Windows 8 Sony Vaio T series Ultrabook.

  My Sony Vaio T series Ultrabook running Windows 8 froze during the execution of a program. The Task Manager does not work, so I used the sidebar on the touch screen to restart. Once I had restarted, or the keyboard or the touchpad worked besides than the backlight on the keyboard. I tried to use the restore system to return a few days, but without success. In my device manager, there are yellow signs next to my keyboard and touchpad. An external mouse does not work either! After a repair, he says: my computer has problems with PnP devices. I can browse only my computer with its touch screen and it's very tedious. I need this computer to type for the school. Help, please!

  Hi Darklo,

  I suggest you follow the methods listed below. Before continuing, please answer the question below.

  (1) what is the program that you try to run?

  I suggest you to follow the below methods and check if it helps.

  Method 1: Run the hardware troubleshooter and check.

  Follow the steps to run the Troubleshooter:

  (a) press the Windows key + C on your keyboard to display the bar of charms.

  (b) type of Troubleshooting , and then click solving problems under settings.

  (c) now, type Hardware Troubleshooter in the option Search .

  (d) click on hardware store to run the troubleshooter.

  Also try to update the drivers for the keyboard and the touchpad.

  Method 2: Update drivers for the keyboard and the touchpad.

  (a)  , press the Windows key + R, type devmgmt.msc.

  (b) right click on the keyboard.

  (c) click on Properties, click the driver tab.

  (d) click the Update driver button.

  (e) click on the OK button.

  Similarly, follow the steps to update the touchpad.

  Method 3:  Run the Microsoft safety scanner.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Hope that this helps, if you have any additional questions, feel free to post. We will be happy to help you.

• Windows will not work stopped... it crashes with just a mouse pointer and the blue screen.

  Windows will not be stopped.  Laptop crashes with blue screen and a mouse pointer.  This laptop has XP Professional SP3.

  Look in the event log to see if any errors are recorded.  Install the Service Profile Hive Cleanup (UPHClean) Microsoft and see if things improve.  See here for more information:

  You experience disconnection problems on a computer based on Windows XP, Windows Server 2003 - based, Windows 2000 or Windows NT 4.0-based:

  http://support.Microsoft.com/kb/837115

  John

• My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• White screen at the Vista start up... only the mouse pointer, loading the driver freezes on crcdisk.sys loading, sfc/scannow does not work...

  Hello
  I don't know if this is the right place for this post... Sorry if it's not! I had looked online if anyone has the same problem to me, I found similar problems, but not the mine one (but if there is, can you please give me the link?).
  I have a DELL LATITUDE D830's with a dual boot (Ubuntu and Vista). When I run Vista I get the Windows logo and then a black screen with only the mouse pointer.
  Keyboard does not work. I can move the mouse, but can not select anything. No work of Ctr + Alt + Delete.
  I can just turn off the computer. At first I need to press F8 to choose something otherwise I get the black screen.
  If I reboot requesting the automatic restoration of the PC that he asks me the account and work only account is mine a (no administrator available). He then suggested to contact the administrator. I checked the error report and nothing is reported: the system works.
  I have no previous configuration to restore.
  I can access the command prompt. So I tried to write sfc/scannow. The answer is that to complete the process requires to restart the computer and make again sfc/scannow. I restart again, the new order, but I get the same answer...
  When I get the black screen, CPU is not disabled, because after a long time (about 2 hours) the computer restarts itself... If something happens even if I don't know what!

  The only thing I have not tried is to restore Vista from CD... I'm really afraid that this could remove the partition, or crash at startup I have, by removing access to Linux!

  I have a backup of all my files, so no matter if what I have to do to cancel my files, but what I really need is to keep Linux operating.

  So, if you have any suggestions... I'm not good at using the computer, so, please, a solution step by step be really appreciate it!
  Thank you very much

  Paola

  PS No peripherics are connected, the wireless is disabled

  Hi seymar,.

  I suggest that you run a tool to restart system on the computer and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions. 4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If the previous step fails then I suggest that you run CHKDSK on the computer to check if there are any errors on the hard drive.
  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click on the command prompt and type chkdsk command-line /f and wait until the scan is complete and later to restart the computer and check what is happening.

  For more information please visit the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The mouse pointer freezes and the monitor starts flashing after startup

  Original title: mouse point frized

  Seconds after my departure from desktop windows 7, point the mouse freezing, screen starts flashing and many vertical column of the flashing spectrum cover the screen. I take the power off, turn on. This time give me the ability to run in safe mode or a few more option. I try them all, don't work.

  Hi Paulamatilde,
   
  I imagine the inconvenience that you are experiencing right now. I will help you on that.
   
  The issue you described mainly due to the incompatibility of the display driver. Please answer the following questions so that we can better help you:
  1. don't you make changes before the show?
  2. What is the brand and model of your computer?
   
  I suggest you to follow the steps mentioned below and check. Proceed to the following method if only the problem persists.

  Method 1

  Install the driver updates and check if the gets resolved. You can check the link to update the drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Method 2
  Download the display driver and the driver of the mouse on the computer manufacturer's Web site and
  install and then check if the problem is resolved.
   
  Method 3
  Check the clean boot issue as Clean Boot Clan have disabled all third-party programs. This way we know whether or not any third-party program is causing the problem. You can see the article mentioned below.
  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135
   
  Note: Note: refer to the section "How to reset the computer to start normally after a boot minimum troubleshooting" to start the computer normally.
   
  I hope this helps. Please get back to us if you need further assistance.

• USB mouse & keyboard stop working after the upgrade of Intel generic drivers drivers!

  Original Post: USB mouse & keyboard stop working after upgrade to generic drivers

  After you install Windows, the Generic USB controller drivers are installed. My mouse & keyboard as planned work & that are each recognized as "compatible mouse/keyboard HID."

  After I installed the Intel drivers for root USB controller, the mouse & keyboard stop working and are classified as unknown. Shortly after, they are considered HP USB Optical Mouse & HP USB Standard keyboard, however the drivers never properly install and they remain under unknown devices with a yellow exclamation point.

  I have searched high & low for these device drivers, they do not exist. I installed the drivers for all of the materials appearing on the site of the seller. This has happened on several computers, laptops and desktop computers.

  I've done all the troubleshooting I can think. Uninstalled all the controllers/USB hubs & restarted. Switched USB ports, I tried new mouse & keyboard, wanted Windows updates.

  The only way I can make it work is if I use the generic Windows drivers, who then recognized the mouse & KB "HID compliant". It seems that if I install Intel drivers, it recognizes the mouse & keyboard more in detail and he wants specific drivers to continue.

  Any help / suggestions would be greatly appreciated.

  Thanks for the reply.

  Because your computer is on a domain network, it would be better to be posted on the TECHNET forums. They are experts in your field of investigation and would be in a better position to answer your concerns.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itprogeneral&filter=AllTypes&sort=lastpostdesc

  In the future if you have problems with Windows. Not to contact us. We will be happy to help you.

• WIN8 - no desktop, black screen with the mouse pointer. Manager tasks and the login screen work.

  As usual I left my computer and after a few minutes, he fell asleep. Next morning, I had moved to the mouse, computer wakes, but I got a black screen with the mouse pointer. I hit CTRL + Alt + Delete and screen with Task Manager option appeared. I stop computer and rebooted. Welcome screen and logon is displayed. After you enter the password and click on submit that the screen becomes black with only the pointer visible mouse. I don't have not installed anything recently. Can you help me find my office?

  OK, I had the same problem. I thought that if you have a pointer and can launch Manager tasks and all programs through its file > new task, then the hull works correctly. No office and no taskbar mean that something is wrong with explorer.exe. Now, he has corrupted not necessarily, may not properly launched.

  Here's what I did:

  1. I opened the Task Manager, the Details tab

  2. I killed all explorer.exe on the list

  3. just to be safe, I also tried to kill dwm.exe but it will be may not be necessary (it never goes away)

  4. I started the new instance of explorer.exe via file > run

  And voila, I had the desktop and the taskbar.

  It will be useful.

• Turn off the mouse pointer shadow power in Server 2008?

  Server 2003 there was a registry called UserPreferencesMask value that could be used to turn off the shadow of the mouse pointer to the complete operating system, including the login screen. This registry value does not exist in Server 2008. Anyone know how to disable the whole OS mouse pointer shadow in Server 2008?

  Here's an expanded section of a screenshot showing no shadow on the mouse pointer after a reboot and have disconnected after putting the UserPreferencesMask key in the Windows registry in Windows Server 2008 under the 'HKEY_USERS_\. Default\Control Panel\Desktop' key and I have already mentioned this so if this isn't what you want, then I don't understand the question, sorry!

  

• Why the green light on my magic keyboard and mouse flashes green when I turn on after replacing the batteries?

  Why the green light on my magic keyboard and mouse flashes green when I turn on after replacing batteries (and not connect to the computer; battery tested good tester)?

  Simply indicates that the devices are on.

  Barry