Find the that database in SDL developer 2.1 object gives less successful than expected

Similar Questions

• How to find the SQLite database browser on an imac

  Where is the SQLite database browser on an iMac?

  Here, you can get a http://sqlitebrowser.org/

• It's my mistake, the system cannot find the specified file 0 x 80070002 back up was not entirely successful. __

  I tried the previous suggestions of verification of the user profiiles & they are all complete, any other ideas? the last time it was saved was on March 21, 2010.

  I have a Windows Vista, AMD Athlon 64 x 2, 320 GB HD & 500 GB upwards on fi car attempted to run several times but nothing works, any suggestion would be appreciated.

  Billbo2010,

  Take a look at this thread resolved about the same error:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/65b8f01d-F9BA-45AD-b0e6-c5ef5c775f77

  Hope that helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• find the size of the database

  Hi gurus,
  
  Can someone suggest me to find the full database size and free space left in the database.
  
  as I am doing the update just gather the statistics.
  
  
  Thank you

  790072 wrote:
  Hi gurus,

  Can someone suggest me to find the full database size and free space left in the database.

  as I am doing the update just gather the statistics.

  Thank you

   1  select round(sum(df.bytes/(1024*1024))+sum(tf.bytes/(1024*1024))) TOTAL,
    2  round(sum(fs.bytes/(1024*1024))) FREE
    3* from dba_data_files df, dba_temp_files tf, dba_free_space fs
  SQL> /
  
       TOTAL      FREE
  ---------- ----------
     6839688     56127
  

• Where to download the sample database for Siebel Innovation Pack delivery Oracle Cloud 2015?

  Hello

  Where to download the example for Siebel Innovation Pack 2015 database?

  I downloaded the complete packages for Siebel Innovation Pack 2015 for Windows 64 - bit Oracle Cloud delivery, but I can't find the sample database installation folder after downloading all available components.

  Please help, thanks.

  Hello

  DB sample installer are no longer available on Oracle Cloud delivery. To get the sample DB, you need to download the Group of hotfixes 5 of Siebel 15 "Patches and updates" section of the portal My Oracle Support (Patch Id: 22081062) and extract the image from the network using SNIC as usual. You may notice that SNIC now offers local ORACLE XE and sample database.

  Also if you select ORACLE XE options while creating the network image and inspect the network image files, you will miss the separate installers. This is because the sample for Oracle XE database Installer is included in the Web Client of Siebel (Mobile/Developer) and the local database setup is included in the Siebel tools.

  So when you run Setup of the Siebel Web Client for the installation of the patch group, you can choose to include the database, which is installed in quiet mode. Please try to install web client and let us know if it gives you the opportunity to choose to include the example database.

  For more details, please visit virtual library:

  http://docs.Oracle.com/CD/E63029_01/books/SiebInstWIN/SiebInstCOM_Image2.html#wp1995894 http://docs.Oracle.com/CD/E63029_01/Books/SiebInstWIN/SiebInstCOM_Image2.html#wp1995894

  Hope this information helps.

  Thank you best regards &,.

  Jean Arpit

• Find the italic and Roman (Punctuations)

  Hi all

  Any solution by Grep or script.

  Request:

  1. need to find the italic character and punctuation marks (novel)

  2 give the no break between this space.

  Screenshot of entry:

  

  Screenshot of output:

  

  Any helpful suggestion should be significant.

  Concerning

  Siraj

  Vandy, that does not work... The string find (. +) will cause problems - it will be as much as possible, and so it can include the two regular italic text and the "fontStyle" test will fail. But if you limit to a single. (just to test the character before the lookahead), you should always test the punctuation character to see if it is not italic. Finally, editing the text cancels other results unless you work from the last to the first:

  app.findGrepPreferences = null;
  app.findGrepPreferences.findWhat = "\\w[!?:;]";
  var found = app.activeDocument.findGrep(true);
  for(f=0; f		   

• To access a medical database, a software print said I need now of TLS 1.1.  Printing the program says that if I get the good Lion 10.7.5 OX I should get the Safari 7.0 or higher with him.  I can't find the procedure to download Safari.

  Friends:

  I have a MacBook Pro - 2.3 GHz Intel Core i 5.  MEM at 1333 MHZ 4 GB DDR3.  My MAC OS X LIon is version 10.7.5.  MY current version of Safari is 6.1.6.

  I tried to connect to a medical/pharmacy/base database program and told me that I don't have a high enough version of TLS.  I have 1.0 and 1.1 is required.  The Lion of MAC OX 10.7.5 should have a version of Safari 7 that TLS 1.1 in - level items or can be upgraded to the level of TLS 1.1.  I looked at my app updates and do not find the update of Safari to 7.   No idea where in the system support or at the Apple retail I can get the update?  Thank you.

  Safari 7 is a very outdated version of Safari.

  Update of Safari, the only is to update your Mac to the new OS X El Capitan. Install it the latest Safari version 9.1.2.

  So see if your Mac can run El Capitan > update of OS X El Capitan - Apple Support

  An alternative would be to use the Firefox browser that still supports v10.7 > https://support.mozilla.org/en-US/kb/how-download-and-install-firefox-mac

• During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?

  Original title: Registery Error Message

  During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry.  How can I do this?

  Hello

  • What were the changes made before the problem occurred?

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• How to find all the views or other objects in the database that contains the specific table (table Employee of exodus) in the oracle database?

  I want to find all objects in the DB which contain a perticular table in a specific schema.

  If there is a question about SQL Developer functionality is simple - click on the table in the connection browser and find the "Dependencies" tab on the right

  Philippe

• Base Panel disappeared from the develop module.  5.7 Mac OS 10.10.1 LR control I tried clicking on the headers of panels that is always there.  Don't get a pop up list.  Can not find the way to restore.  What should I do?

  Base in the development model Panel no longer appears.  Began this afternoon.  Use LR 5 since its release.  No problem before today.  Searched the forums and has not developed the control, click module headers.  List of control does not appear.  What should I do next?  I did a restore of Time machine, but nothing has changed.

  In the develop Module, go to the window menu in Lightroom (it's between the view and the aid), select panels, select Basic.

• I have about 14 000 songs in my library, about 4 copies of each of them. Try to remove duplicates, but can only do one at a time. I spent many hours, check all the files I want to delete only to find out that I can't delete them both?

  I have about 14 000 songs in my iTunes library, but really there are only about a quarter as much because there are so many duplicates. I don't know how they got there in the first place, and try to remove them is infuriating! I have already spent several hours going by checking all the files I want to remove (thinking that I would delete then all files at once) - only to find out that I still have to delete them one at a time. There must be a better way! Help, please.

  If you don't know that you want to delete all checked the songs in your library:

  • Create a new smart playlist with the following rules:
    
    This will show then checked all the songs in your library.
  • Select all the items in this playlist (Ctrl-A)
  • Hold the SHIFT key and press DELETE - follow the prompts to remove songs from your library and (if necessary) your PC media files

  In case of problem, you must back up your library before you do just in case the results are not what you expect - see tips to the user of turingtest2 on your iTunes for Windows with SyncToy to backup library for a suitable and recommended method.

  There is no 'simple' way to reliably remove duplicates from a library, but see the intelligence in this threadon the use of a scripted for removal of duplicates (for example).

  Long-term, try and avoid adding anything in your iTunes library that already exists in it - that's how arise the duplicates (unlike an opinion apparently dispersed, iTunes not of is duplicate anything in normal operation).  I've seen several comments suggesting here a few users to correctly copy their library from an old computer to a new one and then add the content of its media files - guaranteed way to finish with a copy of database entries or media files.

• Cannot copy an audio CD. Get the error message that Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.

  When I go into the Options menu and click on the music tab Rip the rip music to this field is empty. When I try to click on I get no response when I click on file name and make changes, then click on apply change I get, the check-out settings could not be applied.

  Hello
  
  You can also try the below methods following the steps by Tim De Baets.
  Method 1: Rebuild the windows media player.
   
  a. exit Windows Media Player.
  b. Click Start, type %LOCALAPPDATA%\Microsoft\Media Playerand then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.
  Note You don't have to remove the folders that are in this folder.
  c. restart Windows Media Player.
  Note Windows Media Player automatically rebuilds the database.
  
  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
  a. exit Windows Media Player.
  b. Click Start, type %LOCALAPPDATA%\Microsoftand then click OK.
  c. Select the Media Player folder, and then click on Delete on the file menu.
  d. restart Windows Media Player.
  Note Windows Media Player automatically rebuilds the database.
   
  Method 2: Disable and enable the windows media player. Follow these steps:
   
  a. open the control panel in the start menu.
  b. open programs and features in Control Panel.
  Note: If programs and features are not available, change seen by large icons at the top right of the control panel.
  c. Select Turn Windows features on or off in the left column of the window programs and features.
  d. click on the plus sign next to multimedia functions.
  e. uncheck Windows Media player, and then click OK. (You may receive a warning message. Click Yes).
  f. restart your computer.
  g. to reactivate the media center follow the same steps and place a check for Windows Media player.
  h. click on the Ok button.
  i. restart your computer.
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
  Method 3: Create a new user profile.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
   
  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows Media Player cannot find the file. 'If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed or deleted'.

  Original title:

  Problems with rip audio CDs with windows media player

  Bought the CD now 82 and try to tear with the windows media player player, but keep getting the message "Windows Media Player cannot find the file. If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted." What should I do to rip this cd please did tear previously no probs, but now seems to have a problem

  Thanks in advance

  Anne

  Hello
  1. You did changes to the computer before the show?
  2. Are you able to extract other CDs using Windows media Player?
  3. What is the file format of the file you are trying to extract?
  Method 1:
  Step 1:
  You can run the Windows Media Player Library convenience store & check if you are able to rip CDs.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  Step 2:

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  
  Method 2: Rebuild the windows media player.

  exit Windows Media Player.
  b. click Start, type %LOCALAPPDATA%\Microsoft\Media Playerand then click OK.
  c. Select all files in the folder, and then click delete on the file menu.

  Note:
  You don't have to remove the folders that are in this folder.
  c. restart Windows Media Player.
  Note:
  Windows Media Player automatically rebuilds the database.
  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
  exit Windows Media Player.
  b. click Start, type %LOCALAPPDATA%\Microsoft, and then click OK.
  c. Select the Media Player folder, and then click delete on the file menu.
  d. restart Windows Media Player.
  Note:
  Windows Media Player automatically rebuilds the database.

  Method 3: Disable and enable the windows media player. Follow these steps:

  a. open the Control Panel from the Start menu.
  b. open programs and features in Control Panel .
  
  Note: If the programs and features are not available, change the view by large icons at the top right of the control panel.

  c. Select Windows turn on or off features in the left column of the window programs and features.
  d. click on the plus sign next to multimedia functions.
  e. uncheck Windows Media player and then click OK. (You may receive a warning message. Click on the Yes button.)
  f. restart your computer.
  g. to reactivate the Media center follow the same steps and place a checkmark for Windows Media player.
  h. click on the Ok button.

  
  i. restart your computer.
  Reference:
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
  Method 4:
  Change the location of Rip. see the steps mentioned in the link
  given below:
  To change rip settings in the Options dialog box
  
  
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-ripping-music
  I hope this helps!

• Find the function object DB with SQL Developer

  Hello to all, SQL developer 4.0.0.13 on Windows 7 64 bit version. I just started to use the function of object find DB. I type the name of the object in the worksheet, select the name of the object and press ALT + g pane, tab, palette, dialogbox binocular opens and shows me all the objects (and schema name) which are referred to as the selected text in the worksheet. When you click on the name of the object, the object opens twice in the object browser. Maybe I understood something wrong. I tried clicking on it once and twice, twice, I see two viewers object showing the same object. Also the pane, tab, palette, dialogbox binocular remains open after that. Is there a way I can hide/close this as soon as I click on the object. Thank you for your help in advance.

  the search panel will remain open until you hide/close it

  I'm not able to reproduce the problem of double-open - what type of object happens to, or she to what whether you click on?

  In addition, you are on an older version, you can upgrade to 4.0.2 because it could have been corrected in a 2 patch releases as your version debuted.

• "Cannot find the dbcodes file": PeopleSoft database Configuration Wizard

  Hello

  I am setting up a new installation of PeopleSoft, based on a copy of the record of my client PS_HOME. I installed before PeopleSoft, but I used the latest versions and started from scratch. Now I use PS HRMS 8.9 and PT 8.48 on a Windows 2003 server. I followed the manual to install 8.48 PT (installation of third party tools, using configuration manager), except for the wizard to install PT, because the files are already there. I changed all config files I had to include suitable locations for PS_HOME, Oracle database drivers, etc.

  Now, I'm trying to use the database Configuration Wizard to automate the creation of the database using Oracle 10.1.0.5.0. After you have selected a non-unicode database, I click Next, select the character set, and then when I click Next again once I get the message "Cannot find the dbcodes file."

  I checked in the folder PS_HOME/setup and there are two dbcodes files: dbcodes.pt and dbcodes.hc. It is originally a kind of confusion, or the wizard missing the dbcodes file somewhere else? Or maybe that's another question altogether, I'm not sure.

  Thanks for the help.

  To start with PS_APP_HOME introduced in PeopleTools 8.52.

  On the road to Peoplesoft: Peopletools 8.52: the PS_APP_HOME variable

  As you run on PeopleTools 8.48, the application is installed in the PS_HOME.

  ptengs. DB is used to create a single database of PeopleTools, you try to create a database of HCM. This file will not be used when creating your database.

  If you want to create your copy of HCM all files from 'PS_APP_HOME' to PS_HOME database and start Data Mover with option to create database.

  Should do the trick.