To access a medical database, a software print said I need now of TLS 1.1.  Printing the program says that if I get the good Lion 10.7.5 OX I should get the Safari 7.0 or higher with him.  I can't find the procedure to download Safari.

Similar Questions

• Error message says that I will get are more windows updates

  Get an error message that says that I will get are more windows... updates and I am unable to see anything on my desk and keeps restarting the computer.

  Get an error message that says that I will get are more windows... updates and I am unable to see anything on my desk and keeps restarting the computer.

  Please quote the message you are getting verbatim. And please tell us when, under what circumstamces, you get it.

  If your computer restarts spontaneously, you are probably blue-screening, and ready to the default reset whenever this happens. It's a poor one by default, and you should change. Do right click my computer, and then choose Properties. On the Advanced tab, click settings under Startup and recovery. Under system failure, uncheck 'automatically restart.

  Now, when the problem occurs again, instead of reboot, you will get the blue screen with diagnostic information. Post back with these details for assistance.

• Windows Media Player11 won't burn CD (O/s Windows XP home) said I need a burnner, when I use another burnner program, it uses the burnner installed in my p/c. What is the solution?

  Windows Media Player11 won't burn CD (O/s Windows XP home) said I need a burnner, when I use another burnner program, it uses the burnner installed in my p/c. What is the solution? Tried all the easy fixes.  IMAP burning is on auto. (services.msc) what's next?

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?
  3. What is the full and exact error message?
  4 have. what troubleshooting steps you tried?

  (1) check that the CD burner is properly connected.
  (2) wipe the drive and check that it is not damaged.
  (3) try a different brand of blank discs.
  (4) if another program is currently burning files on the CD, wait for the burning process is finished.
  (5) quit other programs that may be using the CD burner.
  (6) restart Windows Media Player.
  7-restart your computer.
  (8) try to run the fix it tool to the article below and check.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/
  (9) uninstall all third-party CD/DVD burning software and check.
  http://support.Microsoft.com/kb/307895

• Hello, I have sold my iMac and changed to macbook pro. now I wanted to install lightroom and it says that I have to disable my other license. the problem is my iMac, I sold. any ideas please? Thank you

  Hello, I have sold my iMac and changed to macbook pro. now I wanted to install lightroom and it says that I have to disable my other license. the problem is my iMac, I sold. any ideas please? Thank you

  Recommend contacting customer service

  *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

  Select the exact options indicated below in the capture to get support of screen options:

  
  

• I used my iMac as a hard drive backup to my macbook once. Now when I update to El Capitan he says that it cannot be updated due to being of a backup. How do I change the drive mode so I can update?

  I used my iMac as a hard drive backup to my macbook once. Now when I update to El Capitan he says that it cannot be updated due to being of a backup. How do I change the drive mode so I can update?

  If you use your iMac as a backup to disk using Time Machine look for a folder called Backups.backupdb.

  It's what keeps you upgraded your operating system, you must remove it.

  Copy everything first if you are on a different drive. It would be wise to create a backup of the iMac on another drive also.

  Check system preferences > Time Machine and make sure that the iMac is not selected as the Time Machine drive.

• I downloaded a disk Image file, and now when I want to delete it, it says that the action cannot be completed because the file is opened in the system

  original title: Disk Image file

  While there, I downloaded a disk Image file, and now when I want to delete it, it says that the action cannot be completed because the file is opened in the system. Pls help me remove :)

  I discovered what the problem was... :)

• I have an old record of creative adobe 4 elements but it is scratched, but I still have the serial number and it is registered on the site Web of adobe, the problem is that I can't find a way to download version 4

  I have an old record of creative adobe 4 elements but it is scratched, but I still have the serial number and it is registered on the site Web of adobe, the problem is that I can't find a way to download version 4

  on the website it starts only from 9

  If anyone knows a site were I can download this program again post in the comments

  Yves pauwels

  kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  If your version is not included in the above link, I don't know any other source

• Problem to find my my Lightroom 4 activation codes and the need to know the procedure to download my

  Hello

  In 2012, I bought Photoshop Cs5 Extended I have Up Graded immediately in Photoshop Cs6 extended and Lightroom 4, now I bought a new laptop and I would like to install my 2 softwears. How could do?

  I need to download Photoshop Cs5 before and after Photoshop Cs6 Extended with2 activation codes?

  I just need to download Photoshop Cs6 extended and use just his activation code?

  Can I download them FRO my old computer or I had to do it from your Web site?

  If I can't find the om of activation codes my 4 Lightroom (not even on my softwear registration page) where can I find and how I download on my new laptop?

  Thank you and happy new year to you all, P. T.

  to install ps cs6 ext:

  you don't have to downliad and install ps cs5.  you just need your serial number cs6.

  You can download the cs6 extended trial and activate with your serial number, http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html,

  You can use the files from your old computer if they are (not installed) installation files.

  for lightroom 4:

  If you follow the 7 steps you can directly download a free trial here: http://prodesigntools.com/adobe-lightroom-4-is-out.html

  and activate it with your serial number.

  If you have a problem downloading, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  Unable to obtain the cookie translates into an error page displayed after clicking on a link on prodesigntools.com

  to find your serial number http://helpx.adobe.com/x-productkb/global/find-serial-number.html

• I received a disk upgrade for windows 7 for my pc to microsoft, but now I get the message that says that my copy of windows 7 may not be true. What should I do?

  When I bought my laptop, it came with windows xp. I found that there was a lot of programs that were not compatible with xp, so I asked microsoft one say upgrade to windows 7 to upgrade my system. Everything worked fine until about 3 months ago when I kept getting a message on my screen that says that my copy of windows 7 is not genuine.  I tried all the tools on the microsoft Web site to solve this problem, but nothing has worked. Finally, I used the diagnostic tool to verify I checked that I put in the activation code is right, what is causing me to pass this message and what I can do to correct that only cost me an arm and a leg? Thank you for your help.

  Run a full scan of CHKDSK and SFC...

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  CHKDSK C: /R

  and press the Enter key.

  We'll tell you that the disc is locked,

  and the CHKDSK will run the next time he started - press Y, press ENTER, and then restart.

  The CHKDSK command will take a few hours depending on the size of the disk, so be patient!

  Once executed, the command CHKDSK Windows should start normally (possibly after a second auto).

  Then, run the SFC.

  SFC - SFC System - Instructions

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key

  Wait for that analysis at the end - make a note of any error messages - and then restart.

  Copy the created CBS.log (C:\Windows\Logs\CBS\CBS.log) file on your desktop (you can not manipulate directly) can compress the copy and transfer it to your Public SkyDrive folder (http://skydrive.live.com ) and post a link to it so that I can take a look.

  Post a new MGADiag report with details of any error messages encountered.

• I upgraded my computer, the new operating system on a new hard drive. Want to get my favorites on Firefox off my old drive, but can't find the file.

  I upgraded my computer, adding a second hard disk for a new operating system and kept the old drive as a data disc. I assumed that I could install Firefox on the new disk and import my favorites from the old installation of Mozilla on the old disk. I can't find the files on the old drive with my favorites. They're still here, or when I reinstalled Firefox, I lost everything even if it was on another drive? I can't find the backup on the old disk files and want to restore my old favorites. Is it possible to do this?

  You must find your profile folder in the old drive, the way in which must be:

  1. First display the hidden files and folders:
     • http://Windows.Microsoft.com/en-us/Wi.../Show-hidden-files
  2. Then go to:
     • < old drive >: \AppData\Roaming\Mozilla\Firefox\Profiles \Users\ < username >
  3. Enter in your profile, and then enter the folder bookmarkbackups .
  4. Copy the latest file from json (backup of bookmarks)
  5. Then restore from them:
     • Restore backup bookmarks or move them to another computer
     • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-...

• I need to download InDesign 6 but I can't find a link to download that.  Is there a different link to get the older version?

  Y at - it a link to older versions to download for a trial?

  Bill, here is the link for Download produced CS6

  I hope this helps.

  Atul_Saini

• OfficeJet 4500 Wireless - MacBook it installs with USB, but can't find it on the network

  Help! I just bought a new MacBook (OS 10.6.4) and try to use the HP Officejet 4500 Wireless with it. I bought the printer a month or two ago and it has been implemented on my wireless (a Netgear - WNR2000 router) and works very well with my old iBook G4 and the Windows PC at home. My new MacBook is connected to the fine of the Internet, but when I went to use the printer, it seems to install ok, make settings IP etc. of the printer on the network, but it's not far past. He says that the printer is "unreachable" or some such nonsense and refuses to see it on the network. I tried both with and without the CD installation, and after you have uninstalled the software HP to uninstall and reinstall in the system of preferences--> Print and Fax settings. But he only sees the printer if I connect it with USB, which goes against the reason for which I bought it.

  I ran the software update and it has found a new version of the software to download to the printer when connected via USB. But there seems to be no way to convince him to find the printer on our network wireless

  Any ideas?

  -Mary

  Wow - I solved the problem. How ridiculous of a solution is that?

  I saw a mention on another Board need to have a SSID for the network of less than 6 characters/letters to get the Mac to work with some other printer/router configuration.

  So I tried here - since I had a network SSID of 7 letters.

  (1) I went in my screen to config the router and changed my SSID to one that was only four letters. I also took the static IP address for the printer, I had just set up (so for those of you watching at home, ignore my comment on this tactic, it was a herring!) leave the settings as they were before I ate with it.

  (2) I then restarted the router, the computer and the printer.

  (3) I first put in place the new SSID on Mac (change the SSID of the router to the old password only left, so it was just a matter of returning the password on Mac, when it entered into the 'new' network). I checked this by seeing in screen config the router if the Netgear now he showed in his list of connected devices (it wasn't before, and I was suspicious that he was some other weird problem, if the Mac has used the Internet very well). He did it!

  (4) then I used the front panel of the printer to go into Options--> Menu Wireless--> Setup Wizard and configure the printer again on the new name of the network SSID. Then I went to the Options--> Print the report--> Config network. It would therefore be to print a page giving the State of the connection confirming that it was the network.

  (5) then I went back for the Mac and use it again the screen of the router config I confirmed that now the printer was also showing up on top of the screen of connected devices (it wasn't before, now she and Mac have been listed!). Then I opened system--> print and fax preferences and tried to add the printer again. This time he finds immediately on the network (using the so-called Hello?), and since I already had the software update (using the steps suggested above) that she already had the correct printer software to use. Wireless printing fine now... After all this noise.

  So, apparently, PrintDoc, you need to add a small little by this spiel you gave me above - to install a printer wireless on a new Mac with a working wireless network (at least one with a Netgear WNR2000 router), the SSID of the network should really be only a couple of long letters (4A worked in this case but not 7). Why, I have no idea. Ridiculous, like I said.

  Thanks anyway.

  I hope this discovery helps someone else too!

  -Mary

• Pima 560 don't scan. It prints, copies, but says that it cannot connect to analyze

  It is plugged in USB, but he thinks that it is not. If I use the commands to the printer, it said 'prepare' and then returns to "place the scanner option '.  If I try to scan from Mac system preferences, I get the message that it can't communicate with the printer because it can be turned off or not connected to USB. Is the case.

  I have a Mac, under El Capitan. Updated to the latest drivers printer... still does not.

  Very frustrating.

  Hi joiede,

  To try to solve this problem, we will have to remove and reinstall the software for the device.  Please disconnect the USB cable and then follow these steps to uninstall the software (if you are unable to perform a step, proceed to the next step):

  1. close all the running applications - including antivirus software.

  2. click on the Apple in the upper left corner.

  3. click on System Preferences, then double-click on "printers and faxes".

  4. in the printer list dialog box, select all printers that are added to the list of printers, and then click 'remove '.

  5. open the library, Printers, Canon and drag the BJPrinter folder to the trash.

  6. open the library, received, and then drag the files that contain the number of your model as part of the file name.  NOTE: Trash NOT the file CanonPrinterDrivers.pkg.

  7. open the library, picture Capture and TWAIN Data Sources and place the MP560.ds cannon in the trash.

  8. in the Finder menu, select "Empty trash" to remove them.

  9. on the Apple menu, click "Restart."

  Once the computer has been restarted, please follow these steps to download the files necessary to start the installation:

  1. visit the Web site at: http://usa.canon.com/support

  2. type PIXMA MP560 in the "Type a template name" box and click the Get button Drivers & Downloads.

  3. under recommended downloads, please click on the "Select" button next to the MP560 MP driver series.

  4. If you agree, please select the check box next to "I read and agree to the terms of the disclaimer and wish to continue the download.

  5. click on the download button.

  6. If a box to record under appears, click Save.

  7. once the download is complete, click on the "Select" button next to the MP560 Scanner Driver series.

  8. If you agree, please select the check box next to "I read and agree to the terms of the disclaimer and wish to continue the download.

  9. click on the download button.

  10. If a box to record under appears, click Save.

  11. once the download is complete, open your download folder.

  12. double-click on [mcpd-mac-mp560-11_7_1_0 - ea17_2.dmg] to install the printer driver.

  13. double-click on [msd_-mac-mp560-15_5_2a - ea8_2.dmg] to install the scanner driver.

  The files will be extracted, follow the prompts to complete the installation.

  Reboot once completed.

  Once the computer restarts, open MP Navigator and try to scan.

  If you continue to have difficulties, please contact our support group by using the following link:

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

• Impossible to download and install Adobe Flash Player. The program says that it installed successfully but unable to find it on the computer

  Original title: I downloaed and installed Adobe Flash Player but can not find

  I need Adobe Flash Player 9.0.125 in order to read a perticular website. I downloaded and installed the latest version of Flash Player. The program said I installed successfully, but I away find it on my computer and the site always told I need. What did I do wrong?

  Hey Papi Williams,

  Welcome to the Microsoft Community Forum.

  From the description of the problem, it seems that you are unable to download and install the latest version of Adobe flash player on your computer. I understand the inconvenience.

  1. What version of Adobe flash player you have downloaded?
  2. What Web browser are you using to view the website?
  3. Which site did you download Adobe Flash Player?

  Let us try the following steps and check if it helps to solve the problem.

  You can read this article and check if the Flash Player is installed correctly on the computer.

  Flash Player help / find the version

  http://helpx.Adobe.com/Flash-Player/KB/find-version-Flash-Player.html

  The latest version of Adobe Flash Player is Adobe Flash Player 11.5.502.135 and you can download it from Adobe's official website: http://get.adobe.com/flashplayer/. If you have a lower version of adobe flash player installed on your computer, try the following steps to uninstall and reinstall the latest version.

   

  Method 1: first of all, use this utility to uninstall the existing flash player http://kb2.Adobe.com/CPS/141/tn_14157.html

   

  Method 2: Reinstall Adobe Flash Player
  Once you have uninstalled properly, and then try to install it from the following link. The latest version of Adobe Flash Player is Adobe Flash Player 11.5.502.135 and you can download it from Adobe's official website: http://get.adobe.com/flashplayer/

  You can also see the link listed here for Flash Player, games, video or audio does not work in Windows questions.
  http://kb2.Adobe.com/CPS/837/cpsid_83715.html

  I hope that helps! For any help about Windows, you can still post on the Microsoft Community Forum.

• Installed Sonic RecordNow DELETE. Ste 7.0, but the program says that my readers arwe set to 'off '. They are not. What's wrong?

  Program installed but starts it gives the error that my readers are set to disabled. (DUH!) My drives are NOT set to off. I know that the program is not compatible with Win 7 (element DLA not install), but it is not necessary to start the program.

  So, what's the problem?

  Duplicate thread:

  I have a problem with RecordNow 7.0.

  When I run the program, I get a message that says that my drives are set to disabled. they are not. I had this problem before and resolved, I think, by installing the latest PX engine update. This time, however, that has not worked. Any ideas?

  Hello

  Given that the program is not compatible with the windows operating system 7 install the program in compatibility mode.

  Most programs written for Windows Vista also work in this version of Windows, but some older programs might run poorly or not at all. If a program written for an earlier version of Windows does not work, you can try changing the compatibility of the program settings, either manually or by using the program compatibility problems.

  To run the troubleshooting program compatibility Troubleshooter

  1. open the program compatibility problems by clicking on the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Under programs, click run programs made for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.