Find VM folders through / Cluster host or full path of VMfolder

Similar Questions

• Storage shared between cluster hosts

  Hello

  I have a number of hosts managed under a VC server clusters. I want to downgrade the ESX 3.5 cluster and spend all my virtual machines to my vSphere cluster. I intend to move the storage currently used by ESX 3.5 clusters as well.

  Is this OK (or supported) or even possible for me to do the following?

  1. attach the storage used by the cluster cluster vSphere ESX 3.5 (so it is folded in TWO clusters).

  2. the servers from ESX3.5 to vSphere vMotion cluster cluster.

  3. turn off the cluster of ESX 3.5.

  I guess it boils down to two questions.

  1. can you be shared between host cluster storage two?

  2. If you can, is it possible to vMotion between cluster hosts, assuming that all the vMotion compatibility checks are successful?

  If the above is not possible, I'm guessing that a V2V of VMS ESX 3.5 would be the way to go, and I have to find new storage for the cluster of vSphere.

  Thank you

  G

  Hello

  If you have a SAN vSphere-taking in charge, so there is no problem.

  According to the CRA on your 3.5/vSphere ESX CPU hosts, you might have problems with storage vmotion/vmotion. One way would be to enable CVS, however requiring all virtual machines to be powered off.

  But present the LUN 3.5 4.x guests and make a svmotion is not a problem if you have taken care of storage. (www.vmware.com/go/hcl).

  Then you can just vmotion (if you do not have CPU incompatibility) virtual machines to new hosts, or stop and move.

  VCP3/VCP4/VSP/VTSP/MCTS: Virtualization

• I can't find the "plugin.expose_full_path" preference in the ' subject: config "list and full path is activated!

  I've tried to get rid of some plugins/extensions owrrisome and wanted to show their full path in ' on: plugins ", so went to set the preference of"plugin.expose_full_path"the ' topic: config" list to 'true '. But, I couldn't find there, and the full path seems already displayed in "subject: plugins. What worries me, is that you are supposed to disable the full path when you are finished, because it creates a security risk. So why don't I see the option "plugin.expose_full_path" and why the full path is activated?

  Copied from:
  http://KB.mozillazine.org/about:plugins

  Location of the plugin file:

  • Mozilla 20 and below: To display the full path to the plugin instead of just the file name (for example, in Firefox 20), type Subject: config in the address bar and press the Enter key. Find the plugin.expose_full_path preference and change the value true (by double-clicking on the name of the preference will switch the setting). Warning: Expose the location plugin can have repercussions on safety on some systems. It is best to reset the preference to "false" by default, when you are finished. 1
  • Mozilla 21: There is no way to display the full path of the file in the topic: plugins list. Another way to find the location of the plugin file (for example, in Firefox 21) must inspect the contents of the "pluginreg.dat" file, located in the profile to your Mozilla application folder.
  • Mozilla 22 and above: From version 22 (for example, Firefox 22) an extra row "path:" is included in the on: plugins list, which displays the full path of the file for all plugins. (bug 661961).

• Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

  Original title: trying to download

  WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

  Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

  It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

  Thanks a lot for any assistance.

  scate 39

  Hello

  ·         You have Microsoft Security Essentials on your computer?

  If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

  You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  See also:

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

• Hello, I got a serial number for adobe package I installed 3/4 years ago, but I don't know where I put the serial number and now I need it! Is anyway to find the series through the application code? Thank you!

  Hello, I got a serial number for adobe package I installed 3/4 years ago, but I don't know where I put the serial number and now I need it! Is anyway to find the series through the application code? Thank you!

  If it's a Windows machine, and then try running Belarc Advisor

  http://www.Belarc.com/free_download.html

  For a Mac, you can try:

  https://Mac-product-key-Finder.com/

  Find the serial number of your Adobe product quickly

• Web site HE created a Hay hiperlinks what how y otros No. Go through it hosting al al, el text donde estan los hiperlinks that no how, no lo puedes seleccionar... Alguien sabe porque?

  Web site HE created a Hay hiperlinks what how y otros No. Go through it hosting al al, el text donde estan los hiperlinks that no how, no lo puedes seleccionar... Alguien sabe porque?

  Can you provide a link to the site?

  On your pages to do a "Select All" and make sure you have no invisible element on top of your links.

• "Mem.Usage.Average" against the total aggregate of cluster host memory

  Please see the attachment for the whole story.

  Please give me a sanity check on this. I used the "Mem.Usage.Average" as a % against allocated VM MemoryMB. The sum of these calculations escaped by far the actual calculations of the vCenter % memory-based. So, I changed my calculations that you see in the worksheet to use the 'Mem.Usage.Average' against the total aggregate available on all hosts in the cluster. This amount came to less than 1% of my calculations based on vCenter GUI. Am I right against the total aggregate memory cluster host instead of against VM memory assigned using 'Mem.Usage.Average '? Thxs-

  

  SDK is not clear on "total configured memory available or". https://www.VMware.com/support/developer/converter-SDK/conv55_apireference/memory_counters.html Part description of memory used as a percentage of the total configured or available memory.

  
  

  $start = (get-Date). AddDays(-5)

  Get-cluster-location ActualClusterName | Get - VM | Where {$_.} PowerState - eq "Receptor"} @{N = "Mem.Usage.Average"; E = {[Math]: round ((($_ |))} Get-Stat - Stat mem.usage.average - start $start - $finish - IntervalMins 1800 - MaxSamples finishing (250) | Measure - Object - average value). Average), 2)}}"

  
  

  Cluster is 6 hosts with 128G per host for total of 768G (786432 MB of RAM), there are 118 powered on virtual machines

  
  

  
  

  for me the SDK says that percentage reflects the relationship between the memory 'active' in the virtual machine against the memory configured for the virtual machine.

  A configured with 8 GB of memory virtual computer that has 'use' of 25% is actively using 2 GB of memory.

  

  I think that your numbers you get for VMS are biased because of the great period of time during which you take the average (see previous answer).

  You can cross-check the mem.usage.average with the mem.active.average.

  In the following code, I calculate the different 2 meters actual memory used by the virtual machine.

  $clusterName = "mycluster.

  $stat = 'mem.usage.average ','mem.active.average '.

  $vm = get - Cluster - name $clusterName | Get - VM | where {$_.} PowerState - eq "Receptor"}

  $stats = get-Stat-entity $vm - Stat $stat - Realtime - MaxSamples 1

  $stats | Group-object - property {$_.} @entity.name} | %{

  [PSCustomObject] @ {}

  VM = $_. Group [0]. @entity.name

  MemoryMB = $_. Group [0]. Entity.MemoryMB

  MemUsagePerc = $_. Group | where {$_.} MetricId - eq "mem.usage.average"} | Select - ExpandProperty value

  MemUsageMB = [int]($_.) Group [0]. Entity.MemoryMB * ($_.) Group | where {$_.} MetricId - eq "mem.usage.average"}). Value) / 100

  MemActiveMB = ($_.) Group | where {$_.} MetricId - eq "mem.active.average"} | Select - ExpandProperty Value) / 1 KB

  }

  }

  The result shows a specific virtual machine, these two numbers are close enough to be considered the same imho.

  That they should be in fact, the mem.usage.average is derived from the mem.active.average.

  

• Re: Files I've accidentally pressed + create new folder. It changed all my file names to now show the full path that is users/Michael/pictures... and I see is no longer the name of the folder.  I use folders for EVERYTHING and I need to go all the way

  CC Lightroom library module: I tried to do something else and I pressed on '+ create a new folder.  All the names of my files now have the full path as their name, i.e. of C:\Users/Michael...  It changed my folder name so much more that I can see is no longer.  I use folders for EVERYTHING.  I never use collections or anything else, and my inability to quickly determine the names of my files is driving me crazy.  How can I get rid of all this nonsense of path?  He was never there until I hit this sign.

  On the same dropdown menu selected "name of folder only.

  

• Find the name of the folder in full

  Hello

  I need assistance to find the indesign files in the folder (s) path and get alert if they match the name of the file.

  While the major part of the name of the folder is commong (highlighted in blue) and the name of the folder only one (highlighted in red) will vary.

  EG.,.

  name = Folder("__/Users/TTT/Desktop/PRODUCTION/Tag_London/B/BB/BEAS/EMEA/CREATIVE_PACKSHOT/___909009____/DOCUMENT/__").getFiles ("*.indd");

  nameT = Folder("/CREATIVE/CHST/WATCHED_FOLDER/BTS/INDesign_IN/").getFiles("*.indd");

  for (i = 0; i < name.length; i ++) {}

  for (j = 0; j < nameT.length; j ++) {}

  If (. parent.parent.parent.parent.parent.parent.name name [i] == 'BB')

  If (name [i]. Name.Split(".") [0] == nameT [j].name.split (".") [0]) {

  Alert (name [i].parent.parent.parent.name)

  }

  on the other

  Alert ('no')

  }}

  The final destination DOCUMENT folder will be current.

  How can I assign / [0-9] + '_' / instead of folder 909009_

  i.e.
  

  name = folder ("/ users/TTT/Desktop/PRODUCTION/Tag_London/B/BB/BEA/EMEA/CREATIVE_PACKSHOT /[0-9] +[0-9] +[0-9] +[0-9] +[0-9] +[0-9] +"_"DOCUMENT/").getFiles("*.indd");

  Thank you very much for the support.

  
  

  Hello

  I don't think you can set a reference file with dynamic URLS (regexp). I think that you can work in two steps:

  (1) the static parent file reference

  var fo = folder ("/ users/TTT/Desktop/PRODUCTION/Tag_London/B/BB/BEA/EMEA/CREAT IVE_PACKSHOT /");

  (2) get all the 'files' and filter the folders above files.

  var filterFunction = function(file)
                                {
  
                                          return (file instanceof Folder) && /[0-9]+"_"/.test ( file.name ) && Folder ( file+"/DOCUMENT/").exists;
                                }
  
  var fos = fo.getFiles( filterFunction );
  

  (3) once you have all your files, fill an internal table with all indd files

  var indds = [];
  var n = fos.length;
  var inddFilterFunction = function(file){
       return (file instanceof File) && /\.indd$/.test ( file.name);
  }
  while(n--) {
   indds.concat ( Folder(fos[n]+"/DOCUMENT/").getFiles(inddFilterFunction) );
  }
  

  (4) do what you have to do with your table of files

  HTH

  Loïc

• By getting only the base filename, not full path to the file upload form

  I can't get the full path of the file in the html code that I need for my script php to a video file of ftp.  I shows the method of recovery of the info file in php first.  My ftp_nb_fput fails because it cannot find the file because it assumes that it is on the server, not the local machine.  I use this so I can see the progress of the transfer without too much code:

  ANY HELP WOULD BE GREATLY APPRECIATED!

  <? PHP

  $source_file = isset($_POST['filen'])? ($_POST ['filen']):($_SESSION['filen']);

  '

  '

  $fp = fopen ($fichier_source, "r");

  $ret = ftp_nb_fput ($id_conn, $destination_file, $fp, FTP_BINARY);
  While ($ret is FTP_MOREDATA)
  {
  $uploaded = 100 * ftell ($fh) / $file_size;
  Print "$uploaded % full \n";
  Continue downloading...
  $ret = ftp_nb_continue ($conn_id);
  }
  If ($ret! = FTP_FINISHED)
  {include 'upload_video_failed.htm';
  output (1) ;}
  else {include 'upload_video_db.php' ;}
  fclose ($FP);

  '

  '

  ? >

  "< FORM METHOD ="POST"ENCTYPE =" multipart/form-data"ACTION="./upload_video.php ">

  < TABLE >
  < b >
  < TD > video < span class = "style1" > * </span > < table >
  < TD > < INPUT NAME = "filen" id = "filen" TYPE = 'file' size = '30' class = "fields" > < table >
  < /TR >
  < b >
  < TD > title < span class = "style1" > * </span > < table >
  < TD > < INPUT NAME = "title" id = "title" TYPE = "text" size = "43" class = "fields" > < table >
  < /TR >
  < b >
  < TD > class < span class = "style1" > * </span > < table >
  < TD > < select name = "category" id = 'category' class = "h1" >
  < option > select the category that best describes your video < / option >
  < option > documentary < / option >
  < option > Educational < / option >
  Interesting facts < option > < / option >
  < / select >
  < Table >
  < /TR >
  < TR VALIGN = "top" >
  Description < TD > < table >
  < TD > < TEXTAREA NAME = "description" id = cols "description" = "32' RANKS '2' WRAP = class ="h1"> < / TEXTAREA > < table >
  < /TR >
  < b >
  Term < TD > < span class = "style1" > < / span > < table >
  < TD > < select name = "duration" id = "term" class = "h1" >
  < option > 1 day < / option >
  < option > 1 week < / option >
  < option > 1 month < / option >
  < option > 3 months < / option >
  < option > 6 months < / option >
  < option > 1 year < / option >
  < option > until this that deleted < / option > < / select >
  < Table >
  < /TR >
  < b >
  < TD > tags < span class = "style1" > < / span > < table >
  < TD > < INPUT NAME = "tags" id = "tags" TYPE = "text" size = "43" class = "fields" > < table >
  < /TR >
  < b >
  < TD > < table >
  < TD > < name INPUT = 'Submit' TYPE = "Submit" VALUE = "Upload" > < table >
  < /TR >
  < /table >
  < / MAKE >

  marcusinfla wrote:

  ONLY PROBLEM, IT IS THAT I CAN'T DOWNLOAD THE VIDEOS MORE THAN 4 MB.  I've included the attribute MAXLENGTH = 100000000 (100 MB) and it does not help.

  ANY IDEAS?

  A good idea is to read the PHP manual. As explained in the next page, the maximum size of the downloads is controlled by the PHP configuration directives: http://docs.php.net/manual/en/features.file-upload.common-pitfalls.php. Normally, the maximum size of an individual file is 2 MB, and the maximum total value is 8 MB. If you are on shared hosting, I doubt that if the hosting company will be willing to change the configuration directives to allow 100 MB mail, but you can always ask.

• full path of the Preview app

  I open a file in the preview.app how to do the "full path" of the file, not only the current folder?

  See if you can find the file by using one of these programs. If you go Finder/display/show bar path, it will show you where it is located.

  EasyFind-replacement of Spotlight

  Find any file

• Display the full path to the extensions?

  Hey there,
  I just found out that you can do the full path of the visible plugins in topic: config, it's useful to get rid of some annoying plugins, I don't want or need.
  Now I wonder if it is also a way to activate this for extensions? I know that the 'good' extensions settle in the profile folder, but those sinister (I didn't want it installed in the first lane) are not located there.
  One of the extensions would be "Browsing Protection 1.10". I know that I can turn it off, but I want deleted, no idea where to find the correct files however.

  Firefox usually detects these extensions installed in the world via an analysis of the registry.

  • https://developer.Mozilla.org/en/Installing_extensions
  • https://developer.Mozilla.org/en/Adding_Extensions_using_the_Windows_Registry

• Display the full path of the files found in the search tool

  I just moved my business to a new processor, and I can't figure out how to see the full path objects that I find using the search tool.  It is not enough simply to see the name of the folder in.

  Under Folder Options, I checked all the options available to display full path names, but all I get for a path name is [name of folder] results.

  What Miss me?

  How to display full path name?

  The game, 29 July 2010 17:54:45 + 0000, rtorstrick wrote:

  I just moved my business to a new processor,

  "PROCESSOR"?

  "CPU" means "Central processing unit". In modern furniture
  computers, the CPU is a relatively small chip, one
  integrated circuit. It is on the motherboard inside the computer
  case. It is not the case itself, or the entire computer, which
  includes the case and what it contains.

  I don't know how incorrect practice of the appeal of the entire computer
  the 'CPU' has started, but here's my proposal: when you buy a computer, you
  normally get the deal and what is in it, with a monitor,
  keyboard, mouse and perhaps a printer. All of these devices
  connect to the case. Because everything connects to the case, the case
  are "Central" to everything, and the term "central unit".
  has been misunderstood and misapplied it.

  and I can't figure out how to see the full path objects that I find using the search tool.  It is not enough simply to see the name of the folder in.

  Under Folder Options, I checked all the options available to display full path names, but all I get for a path name is [name of folder] results.

  What Miss me?

  How to display full path name?

  Right-click on a file name, the research found and choose "Properties".

  Ken Blake

• Full path to get-file issues

  Hello, I have some difficulty trying to understand how I would correlate Lucd function "get-folderpath" to get the actual file, that it is.

  (Code Lucd below)

  Function Get-FolderPath {}

  (param

  [parameter (valuefrompipeline = $true,

  position = 0,

  HelpMessage = "enter a folder")]

  [VMware.VimAutomation.ViCore.Impl.V1.Inventory.FolderImpl []] $Folder.

  [switch] $ShowHidden = $false

  )

  Begin {}

  $excludedNames = 'Center', 'virtual machine', 'homepage '.

  }

  {in process

  $Folder | %{

  $fld = $_. ExtensionData

  $fldType = "yellow".

  if($FLD.) ChildType-contains 'VirtualMachine') {}

  $fldType = 'blue '.

  }

  $path = $fld. Name

  While ($ FLD.) Parent) {}

  $fld is get-view $fld. Parent

  If ((! $ShowHidden - and $excludedNames - notcontains $fld.)) (The name) - or $ShowHidden) {}

  $path = $fld. Name + "\" + $path

  }

  }

  $row = "" | Select Name, Path, Type

  $row. Name = $_. Name

  $row. Path = $path

  $row. Type = $fldType

  $row

  }

  }

  }

  With the help of this feature I can do a:

  $counter = 0

  $allfolders = get-Folderpath (get-file |?) {$_.name - notmatch ' data centers | VM | host"}) | Select @{n = 'Number'; exp = {$global: counter; $global:counter++}},@{n='path'; exp = {$_.path}}}

  Who will return as:

  Path number

  ------ ----

  0 datacenter1\network

  1 datacetner1\datastore

  2 datacenter1\SIT1

  3 datacenter1\Templates

  4 datacenter2\EA1

  machine virtual datacenter2\Discovered 5

  6 1 datacenter2\DEV

  7 datacenter3\Appliances

  8 datacenter3\Templates\Windows

  9 datacenter4\Templates\Windows

  I would like the user to be able to see that output and decide where to place their virtual machine if she would be so:

  $x = read-host "select the right folder.

  #in that this would equal the actual file

  Get-file $allfolders [$x]

  But it does not work as get-file does not use the full path... is there a way to do this?

  Got what I was looking for help

  #

  $global: count = 0

  $allfolders = get-Folderpath (get-file |?) {$_.name - notmatch ' data centers | VM | host"}) | Select @{n = 'Number'; exp = {$global: counter; $global:counter++}},@{n='path'; exp = {$_.path}}}

  #

  $allfolders

  $x = read-host "select a folder to place the virtual computer in.

  $fullpath = $allfolders [$x] | % {$_.path} | % {$_.split("\")}

  $DCname = get-data center $fullpath [0]

  foreach ($folder in ($fullpath) [1..) () ($fullpath) .length-1)])

  {

  $dcname = $dcname | Get-file $folder

  }

  With $dcname holding the folder object

• my records show the full path (LR 2.3, Vista) - how to restore their original appearance?

  I spent a frustrating hour trying to find the solution to this riddle (where the answer is obvious and well documented, all I can say is that I tried!  ;-)

  My files used to mask the full path (thankfully) and suddenly is no longer do so. For example, I used to see G10\2009 of Canon, but suddenly I get:

  Documents and Settings\edwin.ludicrous\Pictures\Canon G10\2009. Some of these trails are long enough, making them useless. Does anyone know how to return to mental health?

  Imminent thanks to my Savior, whoever you are

  Edwin

  Hey Edwin!  Click on the "+" with the small triangle next to the word FILES at the top of the files Panel downwards. You will have this menu:

  

  The lower part root folder display: is what controls that. Try to check folder name only to see if it's what you want.