"FIRE WALL in" ERROR at STARTUP (but fire wall has never been extinguished)

Similar Questions

• I get the error "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  original title: NTFS problem
  Every 5 seconds, I get a warning (event ID 136) that says: "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  Immediately followed by an error (event ID 137) that says "on the C: volume default transaction resource manager encountered a one-time error and could not start. The data contains the error code. »

  I am running windows 7 ultimate in any way to solve this problem?
  

  Hello

  This problem occurs if the Windows file system transaction log is damaged. The Windows file system uses the transaction log to retrieve the system transactions when a file error occurs. The system of common log (CLFS) transaction logs may be left in an inconsistent state. When the CLFS transaction logs are in an inconsistent state.
  To resolve this problem, delete the files .blf and .regtrans-ms in the folder % Windir%\System32\SMI\Store\Machine.
  After you restart the computer, the registry regenerates the deleted files. These regenerated files are in a consistent state.
  1. click on Start , type cmd in the Search box, and then click cmd in the list of programs .

  2. click on run as administratorand then click continue.
  If you are prompted for an administrator password or for confirmation, type the password, or click allow.

  3. at a command prompt, type the following command and press ENTER:
  fsutil resource setautoreset true c:\
  Note these steps assume that Windows is installed in the default location, drive C. If this is not the case, adjust the drive letter of the path of the folder to match your configuration.

  4 restart the computer.

  I hope this helps.

• I'm trying to reinstall CS2 on an XP that has never been installed. The download works fine, but will not accept my serial number to activate. I copy and paste from my account to ensure accuracy. Continue to receive the serial number incorrect error. What

  I'm trying to reinstall CS2 on an XP that has never been installed. The download works fine, but will not accept my serial number to activate. I copy and paste from my account to ensure accuracy. Continue to receive the serial number incorrect error. What would be my next step to get this race?

  CS2 (or earlier version) activation server has disappeared, then read below

  You MUST use the special number on the page, not your original serial number

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• Reinstall an app in the market shows. But this request has not been downloaded.

  Two days back I tried to download some applications on the Marketplace.

  But I didn't have any link to download the application.

  In the market shows 'reinstall application. " But this application has not been downloaded.

  Hello

  You will need to work with the support to the market.

  Answers is a technical support site of journal peer for Windows and other Microsoft products and
  has nothing to do with market or third 3rd sites.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine, but of course, this should work if you think you need.
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues

• my computer has never been able to upgrade to vista service pack 2, it is said that he failed and error code 80070570

  my computer has never been able to upgrade to vista service pack 2, it is said that he failed and error code 80070570. I have also a box gray volume that keeps popping up on my screen. It is grey with a yellow speaker and a red volume bar that says 0. I tried everything on the forums as a clean boot and the registry editor. Any ideas?

  I recommend you:

  Go to a command prompt:

  Start, all programs, accessories, command prompt.

  Right click on command prompt and select "Run as Administrator" http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token > and run sfc/scannow http://support.microsoft.com/kb/929833>

  Type exit (to close the elevated command prompt window)

  Reset

  See if that solves the problem.

  If not, run the update http://support.microsoft.com/kb/947821system tool >

  02:42:25 amUTC 23/08/11

• Installation 6 Lightroom from a disk and get an error message that says OS not met obligation / no support for Windows Vista.  Vista has never been loaded on this PC.  It is running Win7

  What installation Lr 6 to a disc, I get an error message that says OS obligation has not met.  Windows Vista not supported.  Vista has never been installed on this PC.  Operating system is Windows 7.  What now?

  Copy the installation files to a desktop directory.

  Right-click on the Setup file in this directory > click Properties > compatibility > win 7 > ok: Finally, double-click the configuration file.

• I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and I was tol

  I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and they told me there is a problem with the .pdf application and I need to contact Adobe Acrobat. This can be corrected?

  uninstall any version of acrobat is installed.

  clean by Download Adobe Reader and Acrobat tool - Adobe Labs

  Restart your computer.

  delete all to delete pdf files.

  If this fails, it is a problem of ms.  If this attempt is successful, then reinstall your acrobat.

• I ordered Lightroom for my PC (#AD005836462DK), but my order has not been approved. No explanation in the receipt e-mail. A wrong?

  I ordered Lightroom for my PC (#AD005836462DK), but my order has not been approved. No explanation in the receipt e-mail. A wrong?

  Hi per,.

  The payment is declined on the side of the Bank. Please contact your bank to get is resolved.

  You can also try to pay with a different credit card.

  Concerning

  Megha Rawat

• How to choose a square Brush tool in CS6 brush?  Sorry if it's a simple question, but nothing has never been easy for me in Photoshop.

  How to choose a square Brush tool in CS6 brush?  Sorry if it's a simple question, but nothing has never been easy for me in Photoshop.

  Not sure CS6 about, but I know that CC has brushes square by default under all of the predefined settings. See catch with the toolbar options below:

  

  I don't think that hardness can be adjusted either so be aware of this.

• nwiz error at startup "nwiz.exe hs has encountered a problem and needs to close. We are Sorrel for the inconvenience. »

  original title: nwiz error at startup

  I get an error on nwiz to restart early upward. The error indicates nwiz.exe hs has encountered a problem and needs to close. We are money for the inconvenience.

  I then send an error report to Microcosft. They respond with: a problem of NVIDIA graphics driver. NVIDIA Graphics Driver has stopped working properly. To resolve this issue, go to the NVIDIA Corporation website to download and install the update:

  At this point, I tried to contact NVIDIA, but they ae not able to provide any information on the update I need.

  I use HP pavilion 754n, Windows XP service pack 3. Presume the NVIDIA was delivered on my computer in 2002. All of the suggestions.

  Thank you

  lostisfound

  Hello

  The video card drivers are corrupted on your computer please uninstall the graphics card in the Manager of devices and then re - install the latest drivers from the manufacturer's website.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  Reference:
  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658

  How to solve the problems of hardware with Device Manager
  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/devicemgr.mspx

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• C# error - 3667 A (different) local site has already been defined

  Using 2.5.3.21 with .net (c#)
  
  I'm trying to create a replication with 3 sites Manager.
  
  If I add three DBSiteConfig to RepSystemCfg.RepmgrSitesConfig with a set of local = true) other local = false, then as soon as I open the environment I get
  
  Error - 3667 (different) local site has already been defined
  
  I am sure that only one is set to local = true.
  The hosts are
  
  localhost:50001 (local = true)
  localhost:50002 (local = false)
  localhost:50003 (local = false)
  
  each with a unique environment.
  
  Is this a possible bug or am I missing something?
  
  Published by: 959818 on September 18, 2012 07:15

  Hello

  Thank you for using the c# for BDB HA API.

  In the version you use, the local site can be defined only once and the remote site cannot be specified no value for local. So please update the code for:

  localhost:50001 (local = true)
  localhost:50002
  localhost:50003

  It will be useful.

  Kind regards
  Emily Fu, Berkeley DB

• I get the error message "logon failure: the user has not been granted the type of logon required on this computer." on the workgroup computer.

  Original title: home network problems

  Here's what I have-

  1 PC connected via LAN - named PC - running Windows 7 pro 32 bit

  1 computer connected via WiFi - named TECRA running Windows 7 pro 64-bit

  1 computer connected via WiFi - named TOSH running Windows 7 Starter Edition

  Network LAN named changed to have the same name as the network WiFi (SSID)

  All computers have the same workgroup name

  Initially, I had a home group for them, created by TECRA but trying to solve the problem I deleted it.

  PROBLEM:

  PC and TOSH communicate perfectly both ways

  TOSH and TECRA so

  HOWEVER, the PC can access TECRA via the NETWORK, but sees TECRA PC and can not access

  Error message:

  \\Parents-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if access you permissions. Logon failure: the user does not have the type of logon required on this computer.

  Attached the screenshot:

  Please Please HELP...

  Thank you

  

  Hello

  I suggest you to run the next fixit mentioned in the following link and check:

  How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034/en-us

  Please answer us on the State of the question to help you further.

• I updated firefox to version 9.0.1, but the appearance has not been changed, pc win 7

  I had updated my other pc (vista) and then the appearance in dispute.
  I tried now with win you 7 one and firefox is still the same as before, but it's the §tre version. When I go to google, the message is always there to update.

  You will see the orange Firefox button if the menu bar is hidden.

  Press F10, or press the Alt key to bring up the 'Menu Bar' temporarily if the menu bar is hidden and you want to access the menu bar.

  See also:

  • https://support.Mozilla.org/KB/how-do-i-get-Firefox-button
  • https://support.Mozilla.org/KB/menu+bar+is+missing
  • https://support.Mozilla.org/KB/common-questions-after-upgrading-Firefox-36

• Downloads will say they are completed, but the file has not been downloaded

  Recently, I was not able to download any type of files using Firefox. When I try, download instantly tell its completed, regardless of the size of the file, but the options 'open' and 'open containing folder' is greyed out. The files do not appear in the folder in Windows Explorer. I have installed DownThemAll extension and use I am able to download files. I can also download files normally using Google Chrome.

  It is possible that your antivirus software is corrupt downloaded files or otherwise interfere with the download of files by Firefox.
  
  You can try to disable analysis in real time (live) files in your software anti-virus temporarily to see if that makes work download.

  See http://kb.mozillazine.org/Unable_to_save_or_download_files (antivirus disable in Firefox preferences - Windows)