nwiz error at startup "nwiz.exe hs has encountered a problem and needs to close. We are Sorrel for the inconvenience. »
original title: nwiz error at startup
I get an error on nwiz to restart early upward. The error indicates nwiz.exe hs has encountered a problem and needs to close. We are money for the inconvenience.
I then send an error report to Microcosft. They respond with: a problem of NVIDIA graphics driver. NVIDIA Graphics Driver has stopped working properly. To resolve this issue, go to the NVIDIA Corporation website to download and install the update:
At this point, I tried to contact NVIDIA, but they ae not able to provide any information on the update I need.
I use HP pavilion 754n, Windows XP service pack 3. Presume the NVIDIA was delivered on my computer in 2002. All of the suggestions.
The video card drivers are corrupted on your computer please uninstall the graphics card in the Manager of devices and then re - install the latest drivers from the manufacturer's website.
How to manage devices in Windows XP
How to solve the problems of hardware with Device Manager
I hope this helps.
Thank you, and in what concerns: Visit our Microsoft answers feedback Forum and let us know what you think.
Shekhar S - Microsoft technical support.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Visit our Microsoft answers feedback Forum and let us know what you think.
I get an error on startup: get an error asus eee pc acpi service has encountered a problem and needs to closeWhat can I do to fix this?GR Erik Frederiks(Asus EEE PC 1005HA)
Did you change on your computer before the show?
Follow the steps mentioned below:
Step 1: Start the computer in safe mode with network and check the issue
A description of the options to start in Windows XP Mode
If the problem does not occur in safe mode with network, follow the next step to isolate the problem.
How to configure Windows XP to start in a "clean boot" State
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click restart to restart the computer.
Method 2: Reinstall ACPI drivers from the site of the factory
Click on the link http://www.asus.com/Eee/Eee_PC/Eee_PC_1005HA_Seashell/#download and try to reinstall the drivers.
It could be useful!
I got this error msg (Windows Live communication platform) has encountered a problem and needs to close. We are sorry for the inconvience.
If you were in the middle of something information you were working on might be lost.
Not able to use my e-mail and Messenger at all, as this message keeps on pop up.
View all Windows Live and Hotmail questions in the appropriate forum found here:
On startup, I get "IDT audio system tray application has encountered a problem and needs to close." How can I fix it?
By replacing the file mixer...
Right click on my computer > in the drop-down list on the left click on explore > in the menu bar, click Tools > File Options > see tab (or display) > 'Show Hidden files... ". "is ticked > stand c:\windows\system32\dllcache and right-click on the sndvol32.exe file and copy > paste here c:\windows\system32 and replace the existing file if requested > re - start.
The error should disappear.
If, for some reason, it does not disappear and you have no sound, download, then reinstall your audio drivers on the PC/Laptop manufacturers website.
See you soon,.
tried to clarify some of my options in "run" and I have not typed msconfig startup required and I made a few small changes and now an error message is popping up saying "asus eee pc acpi service has encountered a problem and needs to close" and it keeps popping up. So I went back after it rebooted and has defeated the changes and restarted again and it the error message keeps coming back!
Hello, Gina Cecchetelli,.
The error message and the event log indicates that the problem is related to the ACPI driver. I suggest you reinstall the ACPI driver and check if you have the same problem. Here is a link I found on the Asus website support to download the ACPI driver:
Note: Install the driver requires professional help. I suggest you to contact Asus to help you best in the installation of the drivers.
You may also need to update the Chipset drivers. You can contact Asus to help you with this:
Here is a link that will give you information about Support for Asus information:
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.
A few days ago, I downloaded SP3 on my windows XP computer. and update the windows installer, eversince, then I have a reception an annoying popup message, which reads as follows: Wuauclt has encountered a problem and needs to close > we're sorry for the inconvenience. SEND a MESSAGE ERROR / DON "T SEND I have highlighted both send and not a thousand times and can't get rid of this annoying popup."
What can I doHi AgnesBradshaw,Follow the steps in the article to resolve the problem:
Whenever my computer load I get this darn error. Pure Networks Platform Service has encountered a problem and needs to close. We are sorry for the inconvenience. I also get a pop up nmsrvc.exe Application error. The statement as "0x66f23ff0" referenced memory at "0x00000000". The memory could not be 'read' PLEASE HELP!Hi heat110,-What is the brand and model of the router you are using?-You "Network Magic" software installed on your computer?Method 1: As a first step, try to restart the service of Pure platform of networks on your computer.Follow these steps to do the same thing:a. Click Start. Click run. Type Services.msc and press ENTER.(b) in the Services window, search for Pure Networks Platform service.c. right-click on the service and click on restart.d. restart the computer and check if you have got rid of the error message.Method 2: Uninstall Network Magic software and then re - install the software by downloading from the website of the manufacturer if necessary.
Original title: I'm under Win XP Pro 64-bit with an amd processor.
I get "Generic host process for Win32 services has encountered a problem and needs to close" when I first start the computer, the sound works, but after the old generic host appears the sound does not work? Don't forget that I'm running 64-bit software.
The search does not work.
Any help would be great.
I got to hit this article the error that you are experiencing with your computer. Refer to the same thing, check if the patch is useful.
I hope this helps. If this isn't the case, answer so we can look for other options.
I just downloaded this twice, tried validating the Cahce / Defraging he... Nothing has worked so far.Hi justinlelie,Here are some articles that might help you to solve the problem:Error message when you start Fable: The Lost Chapters: "Fable has encountered a problem and needs to close."
Original title: we cannot open our FlipShare software... very frustrating! Help, please!
We cannot open our FlipShare software. Whenever we click on the icon, an error message appears which says "Flipshare has encountered a problem and needs to close." It is that has happened on the second computer. Help, please!
I suggest that you make sure you have the latest version of the Flip phone software.
Click here for a link to download the software. This is the version 5.10.
Download the software and then see if you still get the error.
Please reply back and let us know if this can help.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
We cannot print anything on my computer. the message is that the Print Spooler Subsystem App has encountered a problem and needs to close. How to get the print spooler to run and work my printer start?
1. were you able to use the printer before without any problem?
2. did you of recent changes on the system?
3. What is the brand and model of the printer?
You can try to start the Fixit from the following link and check if it helps.
You can also read the following article and check if it helps.
When I am trying to edit a template in Visual Studio and I go to GroupLevel1Style > FieldCaptionStyle, and then click borders and pour the tab, the following error message displays "Microsoft Visual Studio has encountered a problem and needs to close", then Visual Studio closes and opens again.
If anyone can help, it is a known bug in Visual Studio? I looked on the Microsoft site in a certain way to contact Microsoft but am at a loss. If you do not know the answer to the problem, can you point me in the direction of a useful contact?
Using Visual Studio 2010, running on Windows 8.
Thank youThis issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)*
Every time you start the Error Message is: dd.exe has encountered a problem and needs to close. Close.
"dd" is - in this list. Looking more far over the line to SD in this list...
What is the 'command' that launches the application (perhaps to widen the column to see everything) and what is its 'location' (perhaps to widen the column to see everything)?
(Only for the DD.)
You could uncheck here, restart and see if it happens again (it will not).
Then, with the information that I just asked for, there's the real 'location' and remove the 'command' begins with manually to get rid of it permanently.
The error occurs when I insert the game black & white 2 or command and conquer the first decade and click install on a automotive screens popping up, I am sure that these two errors are almost identical and sure if one is fixed so will the other be.
The error that says "Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »
To try to fix it already I found a page here which tells me how to install drivers different installshield, and I installed everything that have been listed. My operating system is Windows Xp home editionHello
Were you able to install these games without any problem before?Step 1: Install all updates of windows on your computer and check the number.
Step 2: Copy the game on your computer, then check the issue.
Step 3: Perform the clean boot your computer.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135Note: To restore your computer to a Normal startup mode, follow these steps:
1. click on start in the box start the search.
2. type msconfig and press ENTER.If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
4. When prompted, click on restart.
Thanks and greetings
Umesh P - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
After you install the update of security KB2707511 when I try to open a ms - dos 16-bit program, I get the following error: "NTVDM. EXE has encountered a problem and needs to close. " Application does not start. I can run without error command.com. Uninstall KB2707511 in Control Panel, add & delete, the application works. Install KB2707511 error occurs.
I have a lot of customers running a 16-bit MS-DOS - program that receives the same error. It seems not to be a malware problem, as it is homogeneous across many machines (unless, of course, all have the same problem of malware). By uninstalling the KB2707511 and the KB2709162 they all work. Something in these updates is in conflict with something in these dos programs causing the "NTVDM. Erorr EXE'.
Maybe you are looking for
This happened for several months and despite the removal of Firefox, my profiles in appdata, and play with the settings, I simply can't solve this problem. I have attached what it looks like, but basically the letter 'i' runs and overlays with other
When I recently used the 'Reinstall OS X recovery' mode to reinstall my OS X 10.8.5 mountain lion he said something on my iMac to be valid to proceed under audit. My AppleCare Protection Plan certificate program expires in March while it means that,
Hello I have a problem. I need to write negative values in a table. But I am not able to edit the table of unsigned [0,255] a painting signed by [-127,128]. You can see in the attached files what SDO block I use and the type of data in the table. I h
Hi all On my development system, I just upgraded to 2013sp1, so I now CVI 8.5, 2010, 2012 and 2013. I had to enlarge the partition so that I can install it 2013! But I must be overlooking something obvious because I can't find a way to uninstall olde
OK, love the new update (1.4) and the video recording is cool and all the... But... How can I get the damned videos the phone is off and on my computer so that I can edit them? I know that you can UPLOAD to Youtube and Facebook, but why can't I conne