Firefox 3.6.3 &.4 uses 100% of CPU and not will not always open or close

Similar Questions

• Window Media Player.exe using 100% of CPU and memory

  I have a Pavilion dv4-2145-dx Windows 7 Ultimate SP1, 4 GB of memory. Windows Media Player.exe supports my CPU 100% usage and it is striking all my memory - 4 GB.   It started right after I set up a homegroup.

  I had to go into Admin/service and change the Startup Type to disabled for:

  • Windows Media Center Receiver Service
  • The window media services planning service
  • Windows Media Player Network Sharing Service

  I tried setting services to manual, but Windows Media Player has yet caught all the CPU and memory, he could then I disabled all the.

  I do not know how to disable homegroup and Windows Media Player services work together so I wonder if everything is always operate has designed with the homegroup and sharing my music.

  Hello

  I think this explains the problem.  The 2 entries here should be deleted, because the first will try to index all of your user profile and the second will attempt to index all of the Windows Partition.

  C:\Users\Rick

  C:\

  To remove them, click to the left of the entrance, highlight it, and then click Remove.  When these two entries have been removed, reboot the laptop and you should find that the problem has been resolved.

  Kind regards

  DP - K

• the system svchost.exe uses 100% of CPU

  When I open the Task Manager, I see that svchost.exe uses 100% of CPU and almost crashes my computer. I would appreciate anyone's recommendations to overcome this problem.

  My OS is Windows XP Pro SP3 with IE8

  There is a fix!

  Manually download and install the KB2888505 fix: the link below.  It fixed this problem on my two XP systems!
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41074

• Can I still sync/add devices using FireFox 30 (including iCHOOSE to use...) and, if so, how/where can I do so (because by clicking 'Sync' @toolbar does NOTHING)?

  Hey guys, can I still add/sync the devices by using FireFox 30 (including iCHOOSE to use...) and, if so, how/where can I do so (because by clicking the sub-title of the menu "Synchronize" FireFox both the toolbar of the browser "icon to sync" icon NOTHING [other that cause the icon toolbar synchronization annoyingly turn for a fraction of a second before you do anything else...])?

  Wow - my computer's clock is very well so I was personally puzzled by the sudden 2033 journal dates too but yes, I will simply record punctually (speaking of that thanks for your) and export my bookmarks to Safari so that iCan go via my iPhone - Bye mozilla. @P_C_T

• Powerd in Activity Monitor uses 100% of CPU, MacBook sounds like a jet taking

  Since I upgraded from Cougar to El Capitan on my MacBook in Late 2009, powerd in Activity Monitor often using 100% of CPU for more than 5 minutes.

  Activity Monitor to stop smoking allows, until I opened AM again, I opened all the time. Allows you to restart, but it happens again and again, especially running iTunes.

  I recently installed a 1 TB OWC SSD and installed clean El Capitan with the Migration Wizard. I've never used my own Mac App. I read something about Nap App causes this problem.

  Any thoughts anyone?

  Turn off the NAP. Most likely you don't need it.

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry of the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.
  6. Download and install the update of OS X El Capitan 10.11.5 Combo.

  [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]

• New DVD on Satellite M40-193 burner uses 100% of CPU

  Hello everyone,

  recently, I replaced my DVD burner with a new. My laptop is a Satellite M40-193 (PSM40E-06M026IT) and the original drive is a carpet * a UJ - 831B. I replaced it with a Sony-Nec Optiarc AD - 7633A because I like the slit in the feature and the Labelflash feature.

  Unfortunately, it's a problem. Whenever I use it, it will use 100% of CPU. I can't understand the problem. Is there anyone who can help me? It is a software or hardware problem?

  Thank you.

  Before we start the discussion please can you me if this optical disk drive is compatible with your laptop model? Did you even check this? Please be honest.

• Svchost.exe uses 100% of CPU. How to fix?

  Svchost.exe uses 100% of CPU. How to fix?

  Please click on the below link and follow the steps given on the page:

  http://www.technibble.com/how-to-fix-Svchost-using-100-CPU-memory-leak/ MD MOEEN AJAZ KHAN - MCP, N +, A +.

• Malware? Firefox downloaded "new version 33.02" on my system and not subsequently visible on "about firefox"

  Malware? Firefox downloaded "new version 33.02" on my system and not subsequently visible on "about firefox"

  The last current version is 33.1. Please get the latest version and later to getfirefox.com if this 33.1 is not listed as your current version.

• After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?

  After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?  Help, please.

  You can not

• How the identity if one table used only by synonyms and not by any other subprogrammes in a schema?

  Hi people

  How the identity if one table used only by synonyms and not by any other subprogrammes within a schema. I see in the TOAD describe objects tab used by, but I would like to identify hundreds of table so I would like to know if there would be any SQL or Meta Data Tables?

  How the identity if one table used only by synonyms and not by any other subprogrammes within a schema. I see in the TOAD describe objects tab used by, but I would like to identify hundreds of table so I would like to know if there would be any SQL or Meta Data Tables?

  The ALL_DEPENDENCIES view has hierarchical information based on object_id

  The view object has the object_type.

  Create a hierarchical query on the first view and attach it to the second view.

  Or you can use the utldtree.sql file in the installation of the DB admin folder. Comments initially show you how a hierarchical query based on the object type.

• Unique guest VM uses 100% of CPU Guest, but only 7% of the CPU host (includes screenshots)

  We have a Dell T420 ESXi 5.5 server.  The host has to a single UC E5-2407 (4 Core 2.2 GHz without Hyperthreading), 16 GB of RAM and RAID storage.

  The host runs a single VM Windows Server 2008, which was a P2V conversion.  The virtual machine is currently assigned 1 Plug and 4 Cores, corresponding to the host CPU.

  Since implementing this server about a year ago, he had a problem recurring pop up every few months.  When the problem occurs, the Server 2008 VM suddenly max use of the processor and the terrible performance, but CPU is be contributed to the maximum, not by a single program, but several normal processes.  For example, WMI, explorer.exe and the Task Manager may show all 30% CPU usage.  In the meantime, even if the guest virtual computer has 100% CPU usage, the host will show only using 300 to 500 MHz of CPU, or about 7% of available.  It comes despite the fact that it is the unique virtual machine and has full reign of all the resources of the host.  If the problem seems to be not with an abnormal load on the Guest VM, but less than the resources of the host.

  Restart the virtual machine does not correct the problem, and restart, which normally takes only a few minutes, lasts 30 minutes.  In the past, restart the ESXi host temporarily solved the problem, however it popup until today and persists even after several reboots of ESXi host.  See the attached screenshots for parameters and symptoms:

  

  It's the performance monitor virtual machine, whereas the problem that happens.  Notes on the virtual machine, Windows 2008 reports 100% of a core 2.2 GHz CPU 4 CPU usage, while the side host, the CPU usage never goes 626 MHz.

  

  Here are the counters of the State whereas the problem that happens.  When you start the virtual machine, the WAIT and SLOW counters were quite high, but they finally dip down when startup is complete.

  

  Here are the parameters and the stats of the ESXi host.

  

  Here are the parameters and the stats of the guest VM so that the problem that happens.

  Other troubleshooting steps:

  We changed number of vCPU on the VM from 4 to 1, without change.

  We put the CPU reserve for the VM to 50% and 100%, no change.

  The machine virtual was version 8 and we have updated to version 9, no change.

  Has anyone ever experience this problem?  Any help towards a solution would be appreciated.

  Hello

  I would say that it is somehow related to the fact that the VM was converted from physical server. Here are a few questions you should ask yourself:

  Type of CPU on the computer old physical host and VM match? At least seller of CPU? It goes the same for the chipset: are there different chipset vendor on the two hosts?

  What type of card NETWORK VM uses?

  Has uninstalled the drivers card mother/CPU specific converted VM? The VM tools are installed?

  Uninstall the old drivers of VM, currently they are not visible in the Device Manager here some is read: http://itknowledgeexchange.techtarget.com/virtualization-pro/removing-old-hardware-after-a-p2v-conversion/

  I would also check the BIOS of the server - maybe there is some sort of option for active energy that interfere with the VM?

• JRun.exe uses 100% of CPU

  Someone at - it guidance on this issue.
  
  Win NT2003 server using Apache + mysql DB CF8 Standard
  JRun.exe has recently started using 100% of time CPU under the supervision of taskmgr
  
  We thought it was related to the use of client variables and fill out the register, but having this application off and cleaned the registry from 500 MB to 18 MB! (also tried to use DB to store)
  
  Have searched google - many examples of question in older versions of CF, but this issue is specifically with MX8
  
  It is possible that some runaway process / application is causing the problem, but find it proves elusive, is it possible to get more information about coldfusion as what he does?
  
  Coldfsion restart service solves the problem for about 2 hours, and then it happens again.
  

  OK, the problem is resolved. For anyone who is interested. We have looked at Apache access.log and noticed a LARGE number of PROPFIND requests this narrowing it seems to open a word document in our CF application and then closing it caused a loop to implement.
  Essentially, the closure of the doc he tried to open the index.cfm which redirected to home.cfm and returned to index.cfm somehow

  Change apache configured to use home.cfm instead of index.cfm fixed the problem.

• NT Kernel & System using 100% of CPU

  Hello

  I just bought a new laptop with Window Vista Home Basic. The laptop has 3 GB of ram. I just read an article online and then I begin to hear the laptop fan run like crazy. then I went on the resource monitor and there was a picture/program that used for 95% of my cpu and it was my system with "NT kernel and system. It's happened more than 30 minutes. Others as to restart the computer, what can I do on this "NT kernel and system" eating up 95% of my CPU?

  I had the same problem on my HP Vista desktop at home for a few weeks. I read that someone solved the same problem by updating a firmware of hardware, so I opened the resource monitor and started to unplug all of my material, one at a time. Now, I have disconnected my adapter USB Belkin, NT Kernel & system down to 0% and my computer completely thawed. The same adapter was only cause me a lot of grief for months it wouldn't react whenever my computer out of standby. I'll update the driver and firmware to see if that helps - otherwise garbage goes in the trash. I recommend the hardware turn off/Unplug (especially if you have with strange behavior) until the problem stops, then the replacement or update of this material.

• Since upgrading to Firefox 4, I had no trouble. How downgrade and not lose my favorites? Or just downgrade without uninstalling Firefox?

  It does not load properly, freezes, crashes unexpectedly, don't pull up of PDF files from web sites and has problems with hotmail. I used Firefox for years and have never had this kind of problem. How do I downgrade to an older version? The new version 4 is obviously not ready to run and is riddled with problems.

  I was just made to look a right fool because of Firefox 4. My boss thinks now that I can't access a simple email! He has problems with IE and its home page had been hacked, so I installed Firefox (forget it automatically installed the most recent version) and it was horrible. The stupid browser will not open the Tiscali email in box for a reason, and he did look like I did something wrong, but it works perfectly fine on my computer running the latest Firefox 3.6. I downloaded 4 for a home use, because I thought that it would be even better, but it was horrible and I made a mistake in downloading it to my boss, thinking that it would make its use of the internet, better! Now, I had to uninstall loads of trash of its Internet Explorer browser and reset everything.

  All the buttons have moved, the tabs are in the wrong place and it is unresponsive! Why on earth have they trashed Firefox!
  

  To get back on track with my browser House, I didn't reactivate installing Firefox 3.16.6 (I kept the Setup file fortunately) and he replaced the horrible Firefox 4 and everything was back to normal. All my favorites and quick links were still in place.

  I think it's full of bugs, and my recommendation is to look for Firefox 3 and (without uninstalling Firefox 4) run the installer as usual to return to your old browser (much better and fully functional). It worked for me. If Mozilla Firefox 4 strength on me, I'll switch to Google Chrome or IE. It's HORRIBLE. Mozilla what you thought! Sort your act! Do not fix what is not broken!

  You can install all versions of previous Firefox from the link below.

  Download Firefox 3.6.16 here and return to the possibility of using your web browser, until they sort the darn bugs! I'm sure that eventually they will be fixed 4 issues so it works again. But seriously, 4 is a bad browser, ugly!

  http://www.filehippo.com/download_firefox/9513/

• Can not find AcerCloud customer to remove. It uses too much CPU and I even do not use.

  HI, I'm trying so my hand on streaming and running programs is fine on my cpu and is not more than 70%. However, I noticed that AcerCloud Client (32-bit) sometimes decides to examine the CPU usage, often maing my CPU 100% usage and I even do not use.  Normally I would not have noticed but my streaming (OBS) software crashes and disconnects me when the CPU usage becomes too high and it's really frustrating, especially since I don't even use the program.

  I picked it out, but in my list of programs he isn't here.  I removed Acer portal because I thought it was her.

  Where is AcerCloud customer?  I want to remove it since its origin a nuisance and I'm not using it anyway.  I win 10.  Help, please

  Hello

  Try to remove all the software listed on this page. With them, you can also remove the acer clouds.

  Also try to navigate to C:\Program cloud\ Acer and see if you find one kind configuration here which could allow you to uninstall. Also, if you don't find anything, try the Program Files (x 86) folder.