Firefox ESR 24.8.1 - Flash Video shows only 1/4 of the image with Mac mid-2014, Retina Display

Similar Questions

• My screen shows only 1/4 of the image. I can scroll to get up and down. How can I fix?

  My screen shows only 1/4 of the image.  I can scroll to get up and down.  How can I fix?

  Hello

  1. You did changes to the computer before the show?
  2. The problem occurs with a particular application or any application?
  3. If this happens with a particular application, then what is the name of the application?
  Method 1:
  Check if the Magnifier is enabled on your computer. Check out the link and follow the steps to change the size of the screen. Check whether the problem is resolved.
  
  Turn on and adjust the Magnifier
  http://Windows.Microsoft.com/en-us/Windows-XP/help/turn-on-Magnifier
  Method 2:
  This problem may also cause if a computer monitor or the screen resolution is changed. Check out the link and follow the steps to change the resolution. Check if the problem persists.
  To change the screen resolution, see the link:
  Change your screen resolution
  http://Windows.Microsoft.com/en-us/Windows-XP/help/change-screen-resolution
  To change the monitor resolution, see the link:
  Change the resolution of your monitor
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/change-monitor-resolution

• Toshiba TransMemory 4 GB USB Flash Drive shows only 4 MB

  My Toshiba TransMemory 4 GB USB Flash Drive shows only 4 MB

  I'm trying to solve this problem, but I can't

  Please someone give me a solution...

  thanx.

  device class GUID: {4d36e967-e325-11ce-bfc1-08002be10318}

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Flash DRIVE shows 4 MB when it is connected to another computer?

  Thank you for details on the issue.

  This problem can occur because the parameters or corrupt device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  The USB key format and check the issue. Please follow these steps:

  a. Click Start and type cmd in the start search box.

  b. right click on cmd , and then click on run as administrator.

  c. type the following command at the command prompt and press ENTER.

  format (the drive letter):

  Note: "(Driver Letter):" as "E:" is the letter assigned to the USB key in Windows Explorer.

  d. now, type and press ENTER.

  Note: Formatting a USB drive will destroy data stored in it. Please make sure that you back up the data you want to keep before you begin.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• The active network connection icon keeps changing on me. He began by showing only 2 connections to the internet and the changes and then later to 3.

  Hi, the active network connection icon keeps changing on me.  He began by showing only 2 connections to the internet and the changes and then later to 3. But does not show where is this extra connection to connect to the local network.  I have a laptop so no wireless and cannot understand why he continues to display an additional connection.

  original title: network access connection

  Hello

  1. what version of Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  2 has there been any changes to your computer until the problem occurred?

  3. have you installed all types of network adapters on your computer?

  4. are you able to connect to the network and browse the Internet?

  I suggest you to follow the troubleshooting steps and check if the problem on your computer is resolved.

  Method:

  Check if the network adapter is displayed in the Device Manager.

  a. right click on computer or workstation.

  b. Select manage.

  c. click Device Manager on the left was next to the window.

  d. on the right side, locate the network adapters and click the arrow to expand the menu.

  If you have multiple NICs installed (watch), I suggest you uninstall the network adapters that is irrelevant to your computer by right-clicking on the adapter irrelevant and selecting Properties and then select uninstall.

  Please provide us with additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• a.d.e. shows only a quarter of the page

  I just downloaded a new ebook and a.d.e. shows only a quarter of the page. I have to hit the arrow key

  After about 3 or 4 sentences because the rest of the page is empty. Not miss any text. So, what gives?

  Any ideas? The rest of my books are very good, as the text covers the entire page. Just not my latest ebook.

  Greetings. Heard of Kobo where I bought the ebook, I asked them to my problem.

  They tested the ebook themselves and had the same problem. It seems that it was the problem of

  the Publisher of the book. So, my contract, they removed the ebook in my library and

  credited my account. No fault of Kobo, no fault of a.d.e. 3. Detective Conan.

• Some flash videos show not except as an administrator

  Flash to work properly. Now, some flash videos work very well and some don't appear at all. If I go to login admin or IE running as an administrator, then it works on all sites.

  Details:

  Win7 32 bit IE8 all up-to-date, current flash (done a uninstall and download a new copy).

  Used to work correctly on logon 'A' (not administrator). I don't know if it started due to lack of right with a few changes. Only change I made recently is to install Office 2010 (2007 was installed before). Videos that do not only see as an empty box and an icon of the space booked as a missing graphic. He doesn't even know what a missing flash element. About half the videos very well work and the other half are missing. If I right click on it, it's like contextual right click on empty space, just defalt, menu, no menu flash. If I start as an admin or run IE8 as administrator then all flash videos appear fine. Type of defeats Win7 improving generally running as non-admin. widows firewall has the default value for a working network. Authorized programs list does not show IE8 or Flash, so they are not explicitly blocked or allowed. Default Internet security settings. Any third party other than AVG free just security to make local virus of surveillance. I don't want to run IE8 in admin mode all the time. Why is - this has changed and how to fix it?

  Thank you

  In fact, I found a solution to this shortly after I posted.  The first symptom, what we saw was that png files are not correctly displayed in IE7.  For example, google on google.com image is a png and he would simply have an image place holder.  Upgrade to IE8 fixed this problem, and only after IE8 that we noticed the program Flash.  Anyway, long story short, start Microsoft FixIt 50198 - security for Windows/IE7/IE8 Editor

  http://blogs.technet.com/b/fixit4me/archive/2009/01/30/reset-security-settings-back-to-the - by default-difficulty-it - live.aspx

  Let me know how it works for you.  I beat myself for 2 weeks looking for a solution and this fixed it!  Hope this works for you, too.

• The videos show only the upper-left corner of the image during playback.

  When I try to play a video in Firefox (23.0) on my Mac, all I can see is the fourth upper left of the video image.

  When I try to display the same video in Safari it works fine. The entire image is rendered.

  Mac OS X 10.8.4

  Hello

  There are a few things that could be the cause. Please can you try the following:

  • Check the Adobe Flash plugin is updated to the latest version
  • Open Firefox in Safe Mode and check if the problem repeats. If this isn't the case, then most likely an Add - it is at the origin of the problem.
  • Try turning off hardware acceleration - Options > advanced > General > uncheck "use hardware acceleration when available.
  • Try to disable "protected mode" in flash player or go back to the Flash 11.2 drive. See this thread for more details support: Flash video only showing a quarter...

  I hope this helps. If this isn't the case, then I would try a Firefox Reset. It will return its default settings Firefox but will keep your browsing history, bookmarks, etc..

• Why Flash graphic showing only 15 bars

  Hello
  
  I created a flash graphic, a 2-d column chart, but it shows only 15 columns, I checked that this query returns more than 20 lines.
  
  When I created a chart sectors with the same query, it too showing 15 pieces with one total extra, "The other" by calculating the other remaining lines.
  
  Can anyone tell why bar and pie chart display all the lines?
  
  Thank you
  -Smith

  Hello

  Go to the attributes table and click Edit next to you series in the section "Series of cards.

  Change the value of lines max here.

  See you soon

  Ben
  http://www.munkyben.WordPress.com
  Don't forget to mark the answers useful or correct ;)

• How the police or the smaller pagesize. Right now, it shows only about 1/2 the page om a screen

  How can I make smaller screensize. Right now, it shows only about 1/2 page

  You can zoom the smaller pages until find you what's happening with your system.

  View > Zoom > Zoom out

  or Ctrl +-(c'est un signe négatif ou un trait d'Union)

• Printed Web page shows only about 20% of the page, centered

  Never had a problem, all of a sudden I can't print a Web page. Instead of everything on the page, it displays only about 20% of the horizontal line, from the left margin. the printed area is centered on the paper. In addition, the amount that is printed extends over five pages, when normally I could print the Web page on a single sheet. Maybe it's the best description printed looks as if the printer thinks the paper is 2.5 x 4 inches. Check the paper size, margins, etc..

  You check in properties of this printer from Firefox?

  See this:
  
  http://KB.mozillazine.org/Problems_printing_web_pages

• I get weird horizontal lines on startup each time more serial number not showing - cannot diagnose over 'AHT' [photos + attached vid] [rMBP mid-2014]

  I have some strange lines when I start my rMBP mid 2014

  I tried the resets of Landau and SCM, tried to make a new user and once again reset.

  Nothing works, somethings wrong with the /gpu of the motherboard?

  Is there something I can do?

  It will still cause problems in the future?

  Is this a problem maybe?

  For another case maybe it's related - I tried to make a diagnosis using the new "AHT" of new Mac (by pressing D on startup)

  It won't let me in because suddenly the serial number is missing from here and 'a way'

  What, then, is everything, it is linked, may be problem?

  Photos:

  

  

  

  Video:

  https://www.YouTube.com/watch?v=-AkTCpbX1dw

  Post edited by: SuperBik3
  videos added

  The logic board need to be replaced.

  Do a 'genius' one appointment at an Apple Store, or select another authorized service provider. You may need to leave the machine there for several days.

  Back up the data on the internal disks before you turn on your computer to anyone. There are ways to back up a computer that is not fully functional - ask if you need advice.

  If privacy is a concern, delete the partitions of data with the ability to write zeros * (do it only if you have at least two backups complete, independent, and you know how to restore on a blank disc from any one of them.) Do not delete the recovery partition, if it is present.

  Keep your confidential data safe during the repair of the equipment

  Apple recommends that you remove permission to a device in the iTunes store before serving.

  * One SSD has no need to be set to zero.

• Muse optimizes the file original because my pictures in a slide show resizing after I used the image several times.

  IIF I import a picture in my website and make a small size then when I create a slide show and add this photo to my computer it comes too little each time. It's like Muze optimizes the original photo and it's very frustrating. I have to open the picture in Photoshop and save it again to fix it. Very annoying. Is this corrected?

  Muse does not affect the original image, but it maintains a copy of the original. You can check by locking the original image file to prevent the Muse to touch.

  Muse perform optimization at the time export/publish founded the most important instance of the image in the project. In this case, when you re-import the image, Muse is incorrectly assuming that you want the new image at the same size as the first instance which you resized more small. We will study this fixation behavior in the next version, but in the meantime, there is a solution.

  Rather than open the image in Photoshop and resave, which changes the date of the change of the image and the Muse of signals re - import image, try double click until the picture is selected. The selection handles will be smaller and solid, if you have the selected image. The handles will be bigger and more hollow if a container is selected. Resize the image to the desired dimensions. Initially, the image will be pixelated because Muse is always using the already optimized copy. However, if you choose file-> Preview in the browser Page, the image will be optimized for new dimensions and you should see a newer version of resolution in both the browser and on your page in the Muse.

  You can more easily check the behavior of optimization as follows:

  1 place an image to 25% of its original size.

  2. Select the file-> Preview in the browser Page, which will optimize the image to the size of 25%.

  3 duplicate the placed image and resize the duplicate to be twice as big (i.e. 50% of the original). Initially, this duplicate will blur after resizing.

  4. Select the file-> Page Preview in the browser, which will be re - optimize image and redraw at a higher resolution.

• Widget ToolTip not showing picture as part of the image after image link

  problem loading image in the ToolTip widget. Image shows only in the drop-down list after related never replaces the default image.  The image shows so tied up in other parts of the widget as the text block, anyone else having this problem?

  Hi Renee

  You must choose the same image in the active panel that is selected on the page.

  http://screencasts.worldsecuresystems.com/SANJU/Screencast_12-30_13-04-2014.MP4

  Thank you

  Sanjit

• Panel problem? My Sony 46 Hx750 shows a black cross in the Center with bright quadrants

  My sony 46 hx 750 shows a large black cross in the Center with quadrants.IS slightly glossy cela a normal feature. This is not seen with ex650 I checked with my friend. This is seen in a dark room with all entries without a signal to HDMI input even. I'm amused if the LED panel is already dead. TV was purchased 1 month back. Bright rooms, it doesn't, someone told me it is sign of death of the LED panel.

  Have any problem with an image? Maybe an effect due to the no signal? Try it on a blakc a white film.

• Show/hide the image with audio (audio does not if necessary)

  Then, I ran some tests to see what was going on so I could better explain my problem.

  I have a slide with a picture that has four clickable areas. First of all, the student listen tell me for a few seconds and then is invited to click on the image areas that are highlighted.

  When the user clicks on one of the fields, an image appears and I taped audio on this 'object '. Note: I didn't use the slidelets substitution as the clickable area is hidden by the new image when the image appears on a click. The user will press a close button that is on the image, set with another clickable button to hide the image then select another pop up box. (See image below... you can see the image of forklift under the transparent image gray... This is where the user clicks the highlighted area).

  

  I tried two ways:

  having the image plays on the whole timeline from beginning to end of blade (be hidden with the show/hide button function)... when I do it, the sound will not play at all (I'm guessing that this is because the audio went silently on the first few seconds of being on the screen, so by the time the student clicked the button finished audio).

  and

  Drag the beginning of the image to close the timeline when the user is asked to click on areas of the screen... when I do that, the sound play a bit, but gets cut off after a few seconds.

  If I click on the areas as soon as the blade begins to play (since i KNOW where the buttons will be activated), the audio plays very well which makes me believe my theory that the audio runs just at the moment where the user gets to click on it.

  There is no break on one of the buttons around this period, so I know this isn't that.

  What I am doing wrong?

  Thank you! :-)

  I'm happy to say after hours of frustration, I finally got to work.

  I went and read your blog Lieve on micro navigation and managed to keep the images at the point of the slide where the user is asked to click on them and define the action of tip:

  to display the image,

  hide the other images and

  Use the assign with 705 rdcmdgotoframe

  and added a line to continue so it wouldn't break (if I do this, it seemed only allows only not the last his image clicked / or show the function works because I have an action secondard on the second tab to display the button 'next' once all are clicked).

  I had to do the math, but thanks to your info on your blog, I was able to understand this. I just tested it and it works... so I'm not going to save and close and breathe until Monday when I can run my final tests on the entire project!

  Thank you!!

  ~ Gina