Firefox has not detected antivirus

Similar Questions

• Firefox has not been started. I downloaded a new. the icon is crossed out. How can I fix?

  March 25, 2011
  I'm on a Mac OS X (power pc)
  After rebooting my computer today. Firefox has not been started. I clicked on the icon, it has begun to initiate and then stopped before that something happened.

  To try to solve the problem, I trashed the application and downloaded a new. He gave me a message: "the Firefox application cannot be launched-10661."

  I retried the download and the second time, the Firefox application icon has been crossed out. It's a circle with a bar slash on it. Same message arrives.

  Sorry, Firefox 4 is not available for Mac PowerPC. You can re - install the previous version from here:
  http://www.Firefox.com/all-older.html

  Or you can find a non-official version of Firefox 4 for PowerPC here: http://www.floodgap.com/software/tenfourfox/

• HP Probook 450 G1: Windows 8 HP recovery disks has not detected

  Hello

  In the hope of someone can help me. I recently had a problem due to what I have to perform a recovery using HP RECOVERY discs [I ordered it] I don't have the HP Recovery Manager or the recovery of microsoft. So I have to do only through HP recovery disks.

  If his sudden has not detected in my laptop. I hit the bottom of the hard drive, I can feel that it is rotating. When I double clicked on it. It appears that I have to insert the disc. [Although I have inserted]. I wiped also DVDs with a cloth dry go with stripes. I tested on my PC it detected [of course it won't work because it is not HP PC].

  I also diagonsised the hard drive [wide test] component, it has demonstrated that it meets the test. I tested both with other CD/DVD games. It works very well.

  I hope you got my problem.

  Product number: F6B14PA #ACJ

  Thank you

  Hello

  Thanks for posting in the HP Support forum.

  Please correct me if I'm wrong, but from your description, I understand that the HP Probook 450 G1 does not detect the recovery DVDs. However, the other CDs/DVDs work fine and the recovery (at least detected) on another PC media.

  I understand that you need to recover, but despite this, Windows starts correctly now? What is the problem you can get you to try to recover? In Winows, recovery disks are recognized?

  To be honest, I don't know why it is not detected, but there are some things you can try:

  -Boot in the BIOS and disable secure boot + turn on Legacy mode

  Details > > http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/The-selected-boot-device-failed-Press-enter-to-continue/m-p/5730515

  Details > > http://support.hp.com/us-en/document/c03653226

  -Try to boot from the media of recovery of the DVD (first is the one that is re. OS - I see, you should have 2 recovery DVDs - one for the OS, one for the drivers).

  keep hitting the Esc key (such as tap-tap-tap).

  This should open a HP Boot Menu. Choose F9 to open the boot options. Select the USB drive as boot option.

  I would like to know if it works for you.

• THE ATTENTION! Has not detected one or more drives during POST

  I have a desktop T7400.

  during post, I get this error:

  "WARNING!" Has not detected one or more drives during POST

  Press F1 to continue... »

  I press F1 and it starts up fine, but I have to stop this message from appearing every time that I turn it on.

  I have 1 CD-ROM and 2 sata hardrives on the system.

  I need help please.

  Thank you

  Disable the option 1 SATA in the bios and save the settings. There is nothing connected to the sata port 1.

• Brother printer has not detected by Windows 7 64 bit.

  Brother DCP145C has not detected by Windows 7 64 bit. What port is recommended for the local printer - LPT1? Windows 7 should detect when the USB connection, but there is no activity. Similarly, the mode to scan on the printer is not responding to "check connection". Thank you.
  Checked the port LPT1 and COM on Device Manager and seem to work correctly. No updated driver needed updated port.

  Hello Richard,.

  If several USB devices are plug-and-play, printers need a print driver to work even on a USB port. I went to the Brother website and a research on the model of printer "DCP145C" increase any responses - are you sure the model number of the printer (not the part number)?

  You have a printer disk supplied with your printer? If you do, try to use that to install the print driver. As far as LPT1 goes, is for a printer with a parallel port (printer), and the COM ports are for those who use the ports series.

  Thus starts with the right model number and look for brother.com right print driver (or use the disc that came with the printer). Try and see if that solves the problem for you.

  Let me know how you fare.

  Kind regards

  BearPup

• Firefox has not rembering passwords

  Firefox has stopped to remember my password

  Make sure that you are not Firefox running in permanent private browsing mode.

  • https://support.Mozilla.org/KB/private+browsing

  To view the history settings and cookies, choose:

  • Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "always use the navigation mode private.

  Do you hear the names and passwords in the password manager or do you mean that you are connected is no longer on to (remember to) Web sites after the closing and restarting Firefox?

  There is a difference between remembering the name and the password in the password manager and a check box "remember me" on a web page.
  
  The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and which is sent to the server.
  
  If that "remember me" cookie is deleted or is corrupted or is not send to the server, then the server remember that you and you must connect once again.

  • http://KB.mozillazine.org/cookies
  • http://KB.mozillazine.org/Password_Manager
  • https://support.Mozilla.org/KB/make-Firefox-remember-usernames-and-passwords
  • https://support.Mozilla.org/KB/username+and+password+not+remembered

• Dynadock U3.0 has not detected 2nd screen to help to win 8

  I don't want to return this product, but if I can't solve this problem I don't have many choices.

  I have Windows 8 Preview of consumer and Dynadock U3.0

  The mouse and keyboard work fine. The second screen was working fine for a few days, but suddenly stopped working after having to reboot my system.

  I have install the driver of Windows 8 Beta. I tried to uninstall and reinstall it, but this does not resolve the issue. My computer does not recognize the USB cable is connected to the computer is the dynadock. The Dynadock screen icon does not appear automatically.

  In view > resolution of the screen, my computer does not detect that a second screen is plugged.

  If I plug the screen directly into my computer, it works fine.

  When I try to install the driver while he is already installed, a message appears saying 'DisplayLink DisplayLink Graphics Software is already up-to-date.

  I tried to restart and re - plug in the USB. Nothing has worked yet.

  > I have Windows 8 Preview of consumer and Dynadock U3.0

  I think the problem is you are using Win 8
  I imagine that there are some compatibility issues as Win 8 is not official on the market

  You have the same problem with Win 7?

• GPIB has not detected when connected to the internet

  Hello

  I have keysight power supply connected to the PXI-8880 via GPIB, it does not detect when it is connected to the internet & it was detected when its not connected. Any body can help me to solve this problem.

  Hello

  This problem occurs because of a conflict in present multiple network adapters in the system. It was a question that has used for detection of targets ethernet to the system that has been resolved. But then this question has also resolved to do the same thing. You can follow the link on how to change the order of the present network adapters in the system.

  http://digital.NI.com/public.nsf/allkb/FD9E1AF5AB1343098625736F0076DE6B

  You must also make sure that the IP addresses of the network adapters are different, otherwise conflict can happen also.

• DisplayPort to DVI - D X 201 Tablet/Windows 8 64-bit - external monitor has not detected

  Hello

  Until a few days ago, I ran the evaluation of Windows 8 with little fuz copy on my X 201 Tablet with the X 200 ban.

  I have a DELL 3007WFP with DVI - D only.

  I connect it to the X 200 ban using an active Displayport to DVI - D adapter of BizLink and such that mentioned, it has worked very well.

  The I ran a fresh install of Windows 7 Pro 64 bit and upgraded to Windows 8.

  Before that, I updated the BIOS to 1.4.0 (who said that Lenovo is ready for Windows 8)

  Now I get "Another deisplay not detected" when I go to the configuration of the resolution of screens.

  I've tried hundreds of different approaches (new drivers, old drivers, windows 7 drivers, drivers own intels)

  Any suggestions?

  Thank you

  For some reason any magic, the monitor is broken on today.

  I have absolutely no explanation as to why!

  What I've done since my post? :

  I went into a store and my X 201 to X 200 ban.

  At the store they have enough to unpack a DP to DVI adabter and test if my setup would work with another adabter, and he did it right away.

  Accordingly, I have concluded that my own adabter was broken. (I even ordered a new).

  Adabter at the store was an edition of small budget that would not allow me to hit the resolution 2560 x 1600, if necessary.

  I bought a DP to HDMI adabter, I tested as soon as I got home. The HDMI worked perfectly immediately (also low resolution @1920 x 1080)

  Today, I took off and entered into tablet mode, for some off GPS test. When I got home, I return the screen back to normal and placed the 201 X in the dock, and it was there, WFP 3007 DELL illuminated like a Christmas tree

  Go figure...

  BTW. I also installed the drivers for my Epson WF-7525 today.

  I tried the last combination of connection/disconnection/drivers etc with no luck, then today out of the blue - it works.

• Printer Officejet 6500 has not detected by routers

  I have a wired network printer HP Officejet 6500 E710a-f. The printer is installed and runs on a network at another location. He has worked on Linux and Windows machines. I have moved and have tried to connect with two different routers. No router "see" the printer. The Panel Network icon is not lit. I can't put a static printer IP address as he always comes back to "automatic" and it sees "no link". Needless to say that the printer is not detected with the HP software (I used Linux and Windows 7 Pro). I can set it up as local USB printer and it seems to work fine. I rechecked the cables are good with other devices and routers 'see' other devices.

  Is there a hope for this machine or is blown networking?

  Hello

  Have you tried another Ethernet cable? is the cable may be defective.

  Other than that if happent it even with two different routers there may also be a failure of the printer Ethernet card...

• Firefox has not today and not reinstall or run somehow

  FF stopped working entirely. I have uninsalled 14.0.1 13 and reinstalled. Who has not solved the problem. I get msg that FF is already running, but it is not running and does not appear in the Manager of tasks as an active process. Scan of the machine for viruses using PrevX shows a clean machine. I tried many ideas in this support website but am limited since I don't have the ability to run the FF. Discount file read-only to read profiles not only did not hold as whenever I checked the properties of the profiles folder always it will reset read-only.

  The problem seems to be with Prevx. Set Prevx mode installation and upgrade, then it works fine.

• Pavilion dv6-6113tx frequency 5 GHz wireless network has not detected

  Hello

  My HP Pavilion dv6-6113tx Entertainment Notebook PC does not detect the signals of frequency of 5 GHz. I tried to verify my update of the software of wireless network and it is also up to date. I asked my colleague to help, they suggested me to attach a double external dongal wireless broadband. Is this the only solution? Or is it possible to replace the network adapter with a double band if this machine does not have this one. Please help me, I'm really annoyed with my computer laptop wifi. He works with 2.4 GHz wifi signal, ut due to problem of interference as indicated by the internet provider that doesn't have the right speed and speed fluctuates a lot.

  Pending a possitive response,

  Thank you

  Hey @arbab92 ,

  Welcome to the HP Forums!

  I understand that you're looking for more information about the 5 GHz wireless connectivity computer laptop dv6.

  The adapter supplied with your laptop is not a dual band card and does not support the frequency of 5 GHz.

  Generally (RFI) Wireless interference can be solved by changing the channel on your router wireless. The default value for most router manufacturers is channel 6, which runs on 2,437 GHz. You can change the channel on your router to channel 1 wireless (2.412 GHz) or 11 (2,462 GHz) away from the bloated channel 6 if there are several wireless networks and devices in your area.

  If changing the channel is not an option, or does not resolve the problem, you can buy a wireless network for your laptop adapter. The only 5 GHz compatible card that is compatible with your laptop is the Intel Centrino Advanced-N 6230. The part number for this is 631956-001. You should be able to order it on the HP part Surfer Web site or third party like Amazon or eBay resellers.

  You can see how to install this map on page 67 of the HP Pavilion dv6 Notebook PC - Maintenance and Service of Guide.

  I hope this is the information you're looking for.

• How to solve usb port? has not detected printer or other devices.

  the two ports usb on the right side of the pc does not detect devices that are plugged in. Only 1 port (usb) to work. have updated, reinstalled (after deleting)... you name it, I did it. Help, please!

  Click RUN - SERVICES. MSC - OK - find PLUG AND option, make IT AUTOMATIC STARTUP TYPE-. FINISHING.

  RESTART YOUR COMPUTER, GO TO THE BIOS SETUP, FIND 'USB PORTS' MAKE IT ENABLE.

  TURN IT BACK ON. Good luck

• WMP110 has not detected 2Wire gateway :-(

  I just installed a wmp110 in my old Dell with Windows XP.  Installed the cd first as indicated, the card into the pci slot.  It does not detect my 2Wire 1000HW.  My Compaq and Apple ibook seems to detect perfectly, but not the card previously installed.

  Apparently this pci slot is no longer I just changed the slots and voila!

• INTERAL card reader has not detected SD card on Media center m7160n Windows 7

  Hello everyone I hope that everyone is doing well unfortunately im not.

  IM extremely frustrated and I don't know what else to try.

  I advanced and installed windows 7 ultimate on a HP Media center PC m7160n on 1 GB ram

  He worked like wonders she even supports aero. What did eal very well until I tested the 9 in 1 card reader internal

  He just did not detect SD cards

  On my device manager, I see no warning anywhere and my drives F, G, H, I are listed as the "yellow" driver laptop drivers

  When I insert USBs automatic playback is fine but when I insert the SD card, nothing comes

  Any ideas?  It worked fine in XP

  Does windows 7 assigned the wrong drivers for the card reader? any advice would be extremely helpful

  I'm going to try the activation of the card chip on services.msc

  Also, sorry if this is in the wrong place.

  Thank you!

  I had a similar problem with a card on a hpe 130f reader. It turned out to be a faulty card reader.