Firefox opens and immediately be "not responding" so I can't do anything
I've never had a problem with Firefox, less the problem of occasional blocking, that would cure a simple force close. I was in Firefox this morning on my MacBook Pro, surfing away as usual. All of a sudden he became unresponsive, so I force closed. Now, when it opens, I see the address bar, the top bar and a page gray - no bookmarks bar or whatever it is now. I get the wheel that turns and can't click on the links at the top to try to get in the preferences... I need help!
On the point of:
Library > Application Support > Mozilla
And remove this folder seems to have solved my problem. I am now in service yet. This is the folder which includes the extensions - and they had to be the culprit.
Tags: Firefox
Similar Questions
-
I have a question where Firefox wont ' quit and give a message "not responding" after I've been using Google Mail. It works fine when I'm not using this program. I tried Safe Mode and the problem still happens when I go on Google Mail, so it is not connected with modules, extensions, etc.
Hello
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions and preferences.- Sites Web open is not recorded in less than 25 versions of Firefox.
To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
Thank you.
-
Why my icons do not respond? I can't just click to open a program
Why my icons do not respond? I can't just click to open a program, I have to right click and then click on 'open '.
Can anyone help?
Don't fall for the scam to buy XP 2010 Malware If yes call your credit card company and get them to freeze all payments due to the SCAM!
You need do a right click in your program or link and choose 'Run as' In the dialog box, uncheck the «Protect...» ». Say ok and now everyhting will work.ORDownload the registry for file association dougknox fix -http://www.dougknox.com/xp/fileassoc/xp_exe_fix.zipRun this tool, and most likely it will solve your problem. -
I have a Dell dimension running XP and IE8 will not respond
I have a Dell Dimension 4500 XP pro and IE8 will not respond.
When I click it it flashes up on top of the screen and disappears. To this effect, I can't watch the updates from Microsoft.Any ideas, anyone please?
Delete.
Hi guys,.
It seems that my problem is solved.
I removed a lot of the years of updates then run my drive setup and turned off and went to bed.
When I turned on this morning I had to install updates. It was the only thing I was worried, and as this seems to be fixed, I am glad I use Firefox as my browser.I installed Speccy and he ran and it shows as running windows updates and it works correctly.
Thanks a lot for all your help guys.
Delete.
-
Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?
The active x bar descends into the small window and freezes all windows open right there and will not respond. This happens when I open a new message and try to attach photos.
Things I tried but has not made a difference:
reinstalled IE 8, deleted the history of the browser, disk Cleanup, removed msn photo upload control, optimized IE8
With xp media center
PS. This occurs also at any time the information down to install an active x on any site control
The only way to surf now with frustration is to use IE 8 NOT add optional
So I fixed that on my own and that's how I did it.
You must uninstall IE 8 completely which will bring you to IE 7 (in my case) and then install IE 8 via the site updates or microsoft.
Uninstallin IE 8 by going to:
Start--->
Control Panel--->
Add Remove programs--->
Scroll down to IE 8--->
Click on delete.
IE8 updates must be removed also, if not then click the box 'To see the updates' on the top of the window to scroll down, look for the IE 8 security updates and delete.
Resart your computer and install IE 8.
This worked for me and may or may not work for you.
-
Laptop is slow and programs do not respond
Sir / Madam
I am faceing a problem when I open my laptop it runs slowly and after the opening of a
program that no matter what program appears as, and these programs "not responding". After 50
It runs at 100 seconds. Can I you have any help from you? If so, I'll be very grateful. By the
way, I am on Windows 7
Your sincerely,.
Jay
Hello
These methods should help you solve the causes of software of these issues.
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">->
http://support.Microsoft.com/kb/2681286#method22Performance and Maintenance<- check="" these="" especially="" the="">->
http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1Other methods of troubleshooting to use according to your needs:
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performanceOpen the troubleshooter of Performance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterTo see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at Applications.
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp
Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded: run DriverView - set
SEE drivers to hide Microsoft - update those with Dump in their names. (Also
updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.How to stop Windows 7 automatically install drivers
http://support.Microsoft.com/kb/2500967===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
After you install an update to Adobe Flash, Firefox opens and remains black screen
Firefox was working perfectly yesterday. When I started this morning, Adobe Flash Player was asked to run an update. I did it. Now, Firefox opens and stays black. I tried a reset safe mode and reinstall full. None worked
Problem solved by disabling the hardware acceleration option in the advanced properties
-
1st generation Apple TV is dead. Orange light but no screen and no resetting of distance. I tried direct connection to Mac and iTunes open and he's not here. Is it possible to restore to the factory without screen or remote workin
I guess you tried maintained low men together for about 6 seconds - silver 1 ATV that will restart to the diagnostic partition but who would rely on the hard disk is functional and if it was ok that wouldn't work with the logic board failure.
I guess you have not fed and attempted to restart.
In case your AppleTV think it is paired with another remote try Menu and left arrow for 6 seconds - the light now intervenes when you press the buttons on the remote?
Also, it could be in the video mode bad - try Menu and upward arrow together for 6 CES switch video modes, but implies that he actually started OK.
-
Firefox opens and loads the website, but it has a white border 3 thumbs down all the right, Firefox is moved to the left so that I only see half of it. To close Red Cross, he is still at the corner of high right!
This has happened
Each time Firefox opened
Is earlier this week.
Reset the page zoom on pages that cause problems: view > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)
See the font size and zoom - increase the size of web pages and the font size and zoom - increase the size of web pages and http://kb.mozillazine.org/Zoom_text_of_web_pages
-
I use Windows Live Mail and when I access the contacts screen I get an error message "Not responding" when I try to access anything whatsoever.
Hello Brenda,.
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
-
Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message
Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message. I t comes up with unicode UTF-8
It print a page of test very well and also printed from Notepad and word fine
Scott
Hi Scott,.
(1) if it works well before?
(2) remember to make changes to the computer before this problem?
(3) what is the complete error message you receive?
Method1: The computer in the boot and a test to see if you can print
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
Important: n ' forget not the computer to start normal follow step 7 in the link.
If the problem persists, you can post your query on the Windows Live Forums for more expert help
Windows Live Forum -http://windowslivehelp.com/
Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
---------------------------------------------------------------------------------------------------------
Visit our Microsoft answers feedback Forum and let us know what you think -
will not export picture. pop up said some export operations have not been executed. This file could not be opened (1). Also, when I try to add a keyword to a photo
the keyboard of the screen opens and I do not have a touch screen. I uninstalled LR6 and re-installed and it still does the same thing?
See about this in the Adobe official feedback forum: 6 Lightroom exports all selected images. This thread contains workaround solutions that have worked for others. Please add your vote and the details of your problem to make it more likely Adobe will give priority to a solution. And please continue discussion there so that everyone benefits.
-
I am fully connected to the Internet, but when I click on my home page and even several other pages, including Windows Live Mail, I get an error message that my DNS server is not responding. How can I work around this problem and to connect to the Internet anyway?
You want to be sure that you use the right setting for your DNS server. You can move this in your browser using the digital URL for the what you want to access web sites. You will find them by using the PING command at the command prompt. Hold the Windows key and press R. Then type CMD and press ENTER. Then enter for example to get the address of the web site of MS PING WWW.MICROSOFT.COM.
Unless otherwise directed by your Internet service provider, you want TCP/IP settings to "obtain an IP address automatically" and "Obtain DNS server address automatically". To do this click Start-> Control Panel-> Network Center and sharing-> view status.
Then click on properties.
From there, click on Internet Version 6 Protocol and properties.
Click on the two radio buttons to "obtain an IP address automatically" and "Obtain DNS server address automatically". Click OK.
Then click Internet Version 4 Protocol and make the same changes in what concerns the version 6.
I hope this helps. Good luck.
Good luck.
-
I got Pro 8.0 on an old computer. tried to install pto 8.1 using only series. as old and it did not work. where can I find pro 8.0 or where can I find the correct SN?
If you do not need acrobat 8 pro or something another link below, you will need to explain.
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC | XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 10, 11, 12, 13. 9,8,7
- Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Download and installation to Prodesigntools help links are located on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".
-
my favorite look and pop does not work. What can I do
my favorite look and pop does not work. What can I do
Did you you turn on 3D Touch in settings > General > accessibility > Touch 3D > WE? What you are trying to use peek and pop in? You press hard enough? Last question, do you have an iPhone 6s or 6s more?
Maybe you are looking for
-
HP Jet 11-d016tu: HP Stream 11 system disabled
Hello. My Hp stream comes back with a message at the beginning asking an administrator password or power on password. I had lent to a friend who said she never put a password on it. After trying 3 arrives with disabled system 94404298. Can anyone hel
-
Problem incrementing in a worksheet
I recently discovered a new problem while trying to increment per line in a worksheet. The problem is when I try to rank 9 to 10 (single two-digit) increment, it increments to ': ' there is no! Similarly, when I try to go from rank 10 to 11 it increm
-
I am trying to install a Trend Titanium Antivirus software, but I need to install my Windows Vista system updates before doing so. The error code is "WindowsUpdate_800F080D" "WindowsUpdate_dt000" How to f
-
Windows media player - Media encoder 9 & result in teeny video on screen
Using of PC laptop Toshiba Windows Vista, I had a MOV to WMV conversion problem, so I followed some previous instructions on the forum fo supported free - codecs.com / downloadWindows Media Encoder 9 Series htm Made me a lot of trouble. Now my windo
-
a site and on the same pix vpn remote access
I was wondering if anyone had an example of configuration, pix running 6.3 (4).