Firefox tabs have been changed

Similar Questions

• Hi support team, in something so my mozilla settings have been changed and he baceme transprenet, now how to get back to normal?

  Hi support team, somehow my mozilla settings have been changed and it became transparent, now how to change, return to normal, because everything is transparent, menus, pages etc.

  This could be the same problem other users report as a white or black screen due to an incompatibility between 33 Firefox and some former card/chipset drivers graphic.

  Please disable hardware acceleration as a temporary workaround. Instructions step by step in this thread: https://support.mozilla.org/questions/1025438

  Does it work?

• Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome.

  Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome. Specifically, a large part of Tumblr and Facebook menu has been changed in another language (Russian, I think). I tried reinstall Firefox, clear the cache and reset firefox to its default state. None of them helped. Any suggestions on how to fix this?

  Hey again,

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  I hope this helps!

  Curtis

• How can I find out which attributes / elements have been changed or are dirty?

  All,
  
  With the help of Studio Edition Version 11.1.1.3.0.
  
  At the time where I did all my questions, I'll be able to write my own book for noobs. Here is another one, query in line with the questions of "How do I...". "" asked in the hopes of shrugging off this carpet coat Flandrin, wet, JDeveloper ignorance. "
  
  How do I know which attributes or elements have been changed or are dirty?
  
  This is different from say if there are any available updates, or if a line is dirty. IE, if a specific attribute or a component has changed.
  
  Installation program:
  < Ol > < li > parts-(1 to *)-> PartHistories tables, master-detail relationship. Parts has Part_Number, Description and comments. PartHistories is essentially a copy of the parts, with an additional column named Update_Notes. < /li >
  < li > when editing a component inputText Description or comments, and the user presses tab, the values are auto-soumis, PPR happens, and a button of validation is enabled. < /li >
  < li > the user based on the validation button that calls a method AppModuleImpl that inserts a copy of parts in PartHistories. The Update_Notes column records the columns that have changed. < /li > < /ol >
  
  Oddly enough, JSF isChanged() method of a component always reports by default, even if the content component changes. According to an article by Lucas Jellema, http://technology.amis.nl/blog/4223/adf-11g-use-the-changed-indicator-to-make-ajax-originated-value-refresh-explicit-to-the-user, the Changed value field must be updated manually, which seems odd to me. The article goes on to describe how to set these values programmatically.
  
  What is intriguing, it is the comment below by Steve Muench
  < Ol >perhaps you can expose a dynamic display of card type generically line attribute that returns the Boolean result of ViewRowImpl.isAttributeChanged (String, attrName) so an application based on the ADFBC could offer up to a convenient expression to flag automatically what values have been modified in the user interface. Just a little thought after reading this... < /ol >
  
  A close example of this is on the page of the ADF not yet documented by Steve blog. Example #46: http://smuenchadf.samplecode.oracle.com/samples/ExposingRowStateOnClient.zip. This example shows how do I know if a line is dirty, but in my view, that it points in the right direction. The problem is that I'm not sure how to convert this code example showing a dirty row to show a dirty attribute. My biggest problem is that the QueryCollection.getViewObjectImpl the .notifyRowUpdated () method signature has changed. the code example does compile anymore; and I do not know how to follow the Bug # 4547474.
  
  Any suggestion or ideas would be appreciated.
  
  Thanks in advance,
  Will be

  I guess that isDirty returns true if the attribute definition has changed, not the value. It's on AttributeDef, so it cannot logically be used for changing values. Use isAttributeChanged for your purpose

  John

• In the middle of my teens adding devices, and registration for the apple's music, security issues have been changed and now nobody seems to remember the answers.  How can you bypass those to change your settings?

  In the middle of my teens adding devices, and registration for the apple's music, security issues have been changed and now nobody seems to remember the answers.  How can you bypass those to change your settings?

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  
  (140233)

• Cannot open any programs, I think that somehow the files have been changed to .lnk files

  Original title: I'm unable to open programs in my Start Menu.

  When I click on an item in the beginning, all programs selection and click it, instead of opening, I get the name of the program, for example Microsoft Works... LNK and that's all I get the program never opens.  I think somehow that the files have been changed to .lnk files but do not know how it happened

  This happened for several months and I'm sure that there is an easy solution to return to what it was but don't know what.  I tried the system restore, but that did nothing and don't know what to do next.  Any ideas?  Thank you... betseyd112

  original title:. LNK files

  Hello

  1. what operating system you are using on the computer?
  2. did you of recent changes on the computer before this problem?
  3 are you facing this problem with a particular program or all programs?
   
  See the methods and check if that helps.
  Method 1: refer to the article for help.
  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
  http://support.Microsoft.com/kb/950505
   
  If the problem persists, create a new user account and check if that helps.
   
   
  Method 2
  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  Let us know the status of the issue.

• From the start, the display settings have been changed

  I woke up this morning my computer starts before a pretty bad storm. I fear something my have been struck by lightning, but I do not know? When I booted up... Windows appeared to be normal... but all my icons are huge, with all the rest... seems to work very well with the internet, etc. I have change the size in pixels and it seemed to normal size, but somethings just not good. It almost seems as if I'm in safe mode, but I'm not. As the fonts are different... I do not know.. does anyone know what I need to do?

  * original title - need help *.

  It could be that your video driver has been reset to some VGA default, rather than the specific card in your system. Check the properties of the display to see if it is correct for your telephone. (Right click on the desktop, properties, settings). You should see the screen and display adapter listed.

  Unlikely, but you can also visit Accessiblility (display) settings in the control panel to make sure that none of those who have been changed.

• WARNING: Your DNS settings have been changed. Accept changes or restore the original settings?

  WARNING: Your DNS settings have been changed.  Accept changes or restore the original settings?

  This is the error message that appears every 3 minutes.  If I click on accept and then I can't get back on the internet unless I reboot.  If I accept the restoration, so I'm OK for the other 3 minutes.  Why is that happening and how can I solve the problem?  (The computer has always been setup for obtain an IP and DNS address automatically.  I have checked the properties and that has not changed).

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• my user passwords have been changed and I can not connect

  my user passwords have been changed and I can not connect

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• File names have been changed to the GUID

  Yesterday, three different actions on our servers had their folder names, replaced by what looks like GUID / their subfolders are unchanged and the files are in tact. Only root in sharing folders have been changed. Windows Server 2008.

  Other than manually, how can I get back them?

  Hi John,.

  It is usually the cause of these cryptographic records when there is an update. But nothing to worry because they do not affect the actual content of your files.

  We suggest that you try to rename them manually.

  Kind regards

• An error has occurred. not all features have been changed successfully - installation of games

  When you try to install the package of games in the Turn Windows features On or Off, I get the error "an error has occurred. not all features have been changed successfully"and then asks me to restart. Restarting does not solve the problem, nothing is installed.

  I tried update readiness tool, but also running SFC (suggestions found elsewhere in this forum) does not.
  I am running Windows 7 Professional x 64

  Are you able to develop the games (sign + box) and see a complete list of the games?  If you can does differences if you play with the checking and unchecking some of the games listed?

  Have you tested with another user in which case your user name is having problems?

  Will be installing SP1 if you try to install in a clean boot environment?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  http://www.Google.com.au/search?q=error%3A+ERROR_SXS_ASSEMBLY_MISSING (0 x 80073701) & sourceid = ie7 & rls = com.microsoft:-to the: IE-address & ie = & oe = & redir_esc = & ei = _GNuTqOdINGQiAe-572wBA

  If you cannot install the SP1, and features Windows is causing problems too, so maybe it's time to think about saving your valuable data and then reinstalling Windows?  What options of recovery supplied with your machine?

• Password error cannot have been changed to my Windows password

  I just change my Windows password.  At the end of the process, I got a pop-up message that maybe encountered a problem and my password may NOT have been changed.  I received an e-mail in Outlook that my password has been changed, etc, etc, etc.

  My concern is if I let Windows and that I'll be able to recover using my old password or my other?  If not, where should I go for Windows help if I can't get into Windows?

  Original title: change password

  Hi Denny,

  If the computer has a different user account which is administrator, you can still use the other account to reset the password of the account of the Moose (administrators can force change other user passwords).

  If you are the only user of the computer, I always recommend that you create an account additional administrator on the computer that can be used for recovery or emergency situations.  This must be a local account that is not connected to a service account or by email online.  For example, on my computer I log in with my Email account, but there is also a "shawn administrator" account on the computer that has a simple password.  I've never used this account, but it's there if I need it.

  So if you are involved (or even if you're not), I would create a local account on the computer as an admin full.  You're not likely to need it, but if you do, this will prevent you from becoming locked.

• Mix only the properties that have been changed

  Hi all

  Is it possible, form where we can identify the properties that have been changed in the source in the past 24 hours and use them only to the mix?

  You can mix changes, but there is no filter option to specify the specific date and time.

  Go to definition of Blender and select the difference as the value for the Mode property of propagation,

  If your Source is another manual entry of the user in DRM, you can think to filter the changes there and then deal with the DRM.

• Last night my 5 Lightroom suddenly seems to update. A shooting blue veined lgo ratings appeared on my screen and many of my settings have been changed. My problem now is that when I export an image on my drive C:, the exported image n

  Last night my 5 Lightroom suddenly seems to update. A shooting blue veined lgo ratings appeared on my screen and many of my settings have been changed. My problem now is that when I export an image on my C: drive, the exported image is no longer automatically appears in my Picasa files as it has for years. How can I fix this please?

  Hello

  Greetings!

  In the export dialog box change the export after option.

  

  Concerning

  Jitendra

• Viruses such as the behavior of the Acrobat Reader software. I have a laptop running WIN 7 and kaspersky AV. yesterday when I started my laptop that I see all the icons on my QuickStart bar browser have been changing drive adobe icon and observe also that

  Viruses such as the behavior of the Acrobat Reader software. I have a laptop running WIN 7 and kaspersky AV. yesterday when I started my laptop I see all the icons from the browser on my QuickStart bar have been changed to the adobe reader icon and also observe that many other programs on my desktop have changed to the adobe reader icon. If you click the icon it opens adobe reader. I deleted Adobe reader using Add or remove programs and the icons back to normal. Yet once, I downloaded and installed Adobe reader 11. the problem has resurfaced. then again, I've uninstalled adobe reader software and installed Adobe Reader version 10 with the same question back. I have now uninstalled Adobe Reader. Please advise on how to install a working copy Adobe reader which will not infect or impinge upon other programs in my laptop.

  Hi imoorthy,

  Please follow the troubleshooting steps mentioned in this document KB Application, file icons change in Acrobat/Reader icon.

  Kind regards

  Nicos