Firefox will replace wndows, etc, etc.? And the real operating system?

Similar Questions

• Want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system is restored.

  My laptop is preinstalled with Windows 7 Home Basic.  At the free launch Windows 10 I downloaded the same and after 2 months, the hard drive crashed.  The repair shop trying to fix formatting, but could not revive.  This is why I bought a new hard drive and repair charge shot Windows 7 Ultimate edition.

  Now, I want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system has been restored.  When I posted the question about how to solve this problem, I was told to try the download by way of USB/ISO file.

  Now my question is that

  one) can I reload Windows 7 Home basic as I have the product key?

  (b) I can then download Windows 10 according to the normal procedure?

  I'm not tech savvy, afraid to download files in USB and then load into the laptop, so this question.

  Concerning

  S Subramanian

  Original title: Windows 7 Home basic

  You can directly download Windows 10. Windows 7 complete edition currently installed is not genuine.

  When you upgraded from a previous version of Windows, what happened is that (your PC) hardware will get a digital right, a unique signature of the computer which is stored on the Microsoft Activation servers. The real Windows 7 or Windows 8 license you were using previously will be exchanged with a key to the diagnosis.

  Whenever you need to reinstall Windows 10 on this machine, go just to reinstall Windows 10. It automatically reactivates.

  Therefore, there is no need to know or get a product key, if you must reinstall Windows 10, you can use your Windows 7 or Windows 8 product key or use the reset function in Windows 10.

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: perform a clean installation of Windows 10

• VMPlayer newbie - switch back and forth between the host and the guest operating system

  I am newbie to VMPlayer. I just installed VMPlayer 3.0.0 build-203739 on Red Hat Linux 5 (host). Then I created a VM comments Kubuntu (8.10). So far so good. In the VMPlayer window, I selected 'play Virtual Machine '. After this, the host operating system controls disappeared and I could see a taskbar on the top of my screen and I could also see Kubuntu startup (in an area of the small window in the center of the screen). The problem I'm running is that I'm not able to navigate outside of this area of the small window. I'm not even able to click/Select the taskbar of VMPlayer top of the screen. The mouse movement is limited to the area of the small window. How to and fro my host and the guest operating system? Is there a key combination? I finally had to stop my VM guest to return to the control of my host system. I guess it's a problem quite newbie that I am running. Any help would be greatly appreciated.

  Hello, welcome to the forum

  Host Windows to switch between comments and the OS (when you are in the guest operating system), you must use ctrl + alt.

  According to this link , it's the same thing in Linux host too.

  >Default VMware Player uses key combination Ctrl + Alt to jump out of the guest. Then CTRLAltdel is accessible via theAltInsert command. If you find this annoying, you can change the jump shortcut to CtrlAltshift by adding the following lines to your ~/.vmware/preferences:

  > pref.hotkey.shift = "true".

  > pref.hotkey.control = "true".

  > pref.hotkey.alt = "true".

  After your installation OS in the virtual machine, install "VMware Tools" on it so you will get better performance and some improvements (like moving your mouse out of guest to your host operating system operating system and Vice Versa, or be able to copy beyond host/guest, better resolution on reviews and...)

  I hope it helps a bit.

  -= If you have found this note/response useful, please consider awarding points to 'Correct' or 'useful ' = -.

  -= If there is a mistake in my notes, please correct me! =-

  -= Thank you =-

• err3 Err1 on startup. system will not f8 or f11 and says no operating system found? What the? A windows vista family premium, a second ago...?

  I hope someone can help.  I can't fly on the f11 or f8 function keys. I have tried bios updated default did not work.  Says Bios and video are shawdowed.  No TPM or TPM has problem.  Fixed Disk0 and fixed Disk1 - F.2a Phoenix BIOS 4.0 Release 6.1 version.  So can't do the system restore? Where is my operating system?  I lost everything in C and D drives?  System will not start or start at all.  Do I have to re - install the OS Windows Wista?  Work about to go back and fix?

  Hello SteveO_1968,

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted.
  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  4. Click repair your computer.
  5. Click the operating system you want to repair, and then click Next.
  6. In the System Recovery Options dialog box, click command prompt.
  7. Type Bootrec.exe, and then press ENTER.

  Note To start the computer from the Windows Vista DVD, the computer must be configured to start from the DVD drive. For more information on the configuration of the computer to start from the DVD drive, see the documentation provided with your computer or contact the computer manufacturer.

  Bootrec.exe options

  The Bootrec.exe tool supports the following options. Use the option that suits your situation.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  • bcdedit/export C:\BCD_Backup
  • c:
  • Boot CD
  • BCD attrib s h - r
  • Ren c:\boot\bcd BCD.old
  • Bootrec /RebuildBcd

  / FixMbr

  The /FixMbr option writes a MBR compatible Windows Vista on the system partition. This option does not overwrite the existing partition table. Use this option when you need to solve problems of corruption of MBR, or when you need to remove the non-standard code from the MBR.

  / FixBoot

  The /FixBoot option writes a new boot sector on the system partition by using a boot sector that is compatible with Windows Vista. Use this option if one of the following conditions is met:

  • The boot sector has been replaced by a non-standard Windows Vista boot sector.
  • The boot sector is damaged.
  • An earlier Windows operating system has been installed after the installation of Windows Vista. In this scenario, the computer starts by using Windows NT Loader (NTLDR) instead of Windows Boot Manager (Bootmgr.exe).

  / ScanOs

  The /ScanOs option scans all disks for installations that are compatible with Windows Vista. In addition, this option displays the entries that are currently not in the BCD store. Use this option when there are installations of Windows Vista which is not in the Boot Manager menu.

  / RebuildBcd

  The /RebuildBcd option scans all disks for installations that are compatible with Windows Vista. In addition, this option allows you to select the facilities you want to add to the BCD store. Use this option when you need to completely rebuild the BCD.

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Some dba and the associated operating system confusion

  Hi all

  I have some doubts related to the database and from the perspective of the OS. Could pelase let someone delete my those doubts and clarify below questions:

  Qus1: Can we have two with the same default port number 1521 listener.ora file?

  Qus2: Why create two groups 'dba' and 'oinstall' during the installation of oracle database?

  Qus3: If my database is using newspaper archive and in case the archiver process is killed and then redo will be archived or not otherwise what will happen?

  Qus4: If I have the catalogue for RMAN metadata database. And in the case of catalogue database broke down. I will be able to use RMAN backupsets to restore the database?

  Qus5: What is needed to run the script "some_path/root.sh" during the installation of the oracle at the last step database?

  Qus6: How can we know what are the database running in my server level operating system itself means if no database is down or crashed, can we get to know on these data base level operating system itself? If Yes, then please specify the command?

  Qus7: How can configure us UDP protocol for my interlocutor?

  Qus: If I update a table and query update happens. Between the two OS gets stop then when he is back my transaction will be rolledback. Please let me know how TI happenes means is there any process to do this or something else?

  Please clarify the issues above.

  Kind regards

  Michel

  fb767351-A660-4b18-9a9f-73bc141f6a0c wrote:

  Hi all

  I have some doubts related to the database and from the perspective of the OS. Could pelase let someone delete my those doubts and clarify below questions:

  Qus1: Can we have two with the same default port number 1521 listener.ora file?

  Qus2: Why create two groups 'dba' and 'oinstall' during the installation of oracle database?

  Qus3: If my database is using newspaper archive and in case the archiver process is killed and then redo will be archived or not otherwise what will happen?

  Qus4: If I have the catalogue for RMAN metadata database. And in the case of catalogue database broke down. I will be able to use RMAN backupsets to restore the database?

  Qus5: What is needed to run the script "some_path/root.sh" during the installation of the oracle at the last step database?

  Qus6: How can we know what are the database running in my server level operating system itself means if no database is down or crashed, can we get to know on these data base level operating system itself? If Yes, then please specify the command?

  Qus7: How can configure us UDP protocol for my interlocutor?

  Qus: If I update a table and query update happens. Between the two OS gets stop then when he is back my transaction will be rolledback. Please let me know how TI happenes means is there any process to do this or something else?

  Please clarify the issues above.

  Kind regards

  Michel

  Michel, you must work on your technique of learning. In the Oracle environment, "If in doubt - try it". This applies to three of your questions:

  1. try to start two listeners, listening on the port and the same address. Then, try different addresses.

  3 kill the archiver process. You'll see the result soon enough.

  4. yet once, test it.

  You have also some questions of documentation:

  2. There is a chapter on this in the installation guide, but I guess that's a little vague on the 'why '. You need to think about the situation where you have multiple databases on a machine with different databases, and you should restrict DBA access to their own DB only.

  7. the Net Services Administrator's guide describes the configuration of the supported protocols.

  8. the Guide of Concepts a chapter describing the background process that will be answered.

  That leaves two:

  5. I don't understand what you're asking.

  6. If I understand correctly it is y no definitive answer on Unix, if you can deduce by looking at files such as oratab or the contents of your directories of dbs. Under Windows, look at the Windows services

• New drive HARD and the new operating system

  My old Windows XP, HARD disk crashed and I insert a new HARD drive in my old laptop.

  I want to install Windows 7 on new HARD drive.

  How to prepare the old laptop XP to accept the new Windows 7?

  You will need to do a clean install.

  How to clean install Windows 7 [full Walkthrough]

  See also:

  Installation and reinstallation of Windows - Windows help

• OfficeJet K7100: The printer does not not after the OS upgrade and the previous operating system.

  Upgrade to Windows 10, officejet K7100 has stopped working, I went back to windows7 and cant feel as driver for printer not found.

  He settled the. Had to re - install the printer using a CD, who had a friend of a friend.

  'Reliable' buddy is chugging along quite well now.

  Thanks a mill for your help.

• Trying to open Lightroom was last updated, the program fails to open.am using an iMac and the ElCapitan operating system. All the answers?

  I installed Lightroom was last updated this morning, and now the program refuses to open. I am a user of iMac with OS ElCapitan. The version change had to 6.2.0 6.2.1.

  Answers to this problem would be appreciated because I have a fall meet.

  Kind regards

  N D Wilson

  We just released 6.4/2015.4 Lightroom which solves the problem of strap Nikon with Lightroom running on Mac OS 10.11.

  Please see Lightroom CC 2015.4 / 6.4 available

  Kind regards

  Mohit

• I had the teacher edition, but never received an email with the details of the product, etc. and the products are not installed (they ask for product key, etc)... What are you doing?

  I had the teacher edition, but never received an email with the details of the product, etc. and the products are not installed (they ask for product key, etc)... What are you doing?

  Hello

  did you purchase your product of these companies like Amazon? If Yes, this isn't a serial number, only a code with which you can request a serial number from Adobe. Please take a look at http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)

  The next part, so I don't see at the very least, ceased to exist on my Adobe website, everything happens in the link above. I leave as an info yet, he could still fit for you. For this purpose, please click your way through your Adobe Store and find the button "get serial number". Fill in the form and after awhile, you will get the real serial number.

  Hans-Günter

• "I lost the top of my Web page that has"File"Edit etc and the toolbar with the House for 'House' and the arrow of" return to the last page. Does anyone know how to reinstall these? I'm obviously not computer savy.

  Missing once more, the blue band at the top of my Web page that has the file ',' Edit etc and the toolbar with the House for 'Home' and the arrow «back to last page»

  == My grandchildren's play about that.

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar and the bar of Navigation, so that they have a check mark.

• Right-click on photos, documents, icons etc. and the drop-down list takes 5 to 10 minutes to view and sometimes never. How to solve this problem?

  I right click on photos, documents, icons etc. and the menu drop-down selection to delete, rename, etc takes 5 to 10 minutes to display and sometimes never. How to solve this problem?

  Hello

  1. have there been recent changes to the computer before the show?

  I suggest to follow the steps provided and check if it helps.

   

  Method 1: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Method 2:

  If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• I have PS CC. If I download PS CS3, to be able to use an older filter, it will mess up my CC and the performance parameters?

  I have PS CC. If I download PS CS3, to be able to use an older filter, it will mess up my CC and the performance parameters?

  Hi Digitalartist,

  This will not affect performance, but it can change the default value of Photoshop CS3.

  In bridge for file associations, you can check if the extensions such as JPEG, PSD etc files have Photoshop selected CC.

  Also check the program by default for images if you directly open images with Photoshop.

  Thank you

• If I purchased this computer about 4 months ago I can support windows 7 free? and the 64-bit system will work with windows 7

  If I purchased this computer about 4 months ago I can support windows 7 free? and the 64-bit system will work with windows 7

  This is the Forum for Windows Update.

  How does the Windows 7 upgrade Option?

  The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010.

  http://www.Microsoft.com/Windows/buy/offers/upgrade-option.aspx

  Above Microsoft link has info for the Options to upgrade Windows 7 from participating computer manufacturers.

  Read the info here to see if you qualify.

  http://www.Microsoft.com/Windows/buy/offers/upgrade-FAQ-option.aspx

  FAQ about the upgrade is at the link above.

  http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Windows 7 Upgrade Advisor.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  For any other question of Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• replace my keyboard (ez4805US) and the need for the tech manual...

  I need to replace my keyboard (ez4805US) and the need for the tech manual... where can I find a...

  Welcome to the HP Forum!

  docwho wrote:

  I need to replace my keyboard (ez4805US) and the need for the tech manual... where can I find a...

  If you really want the manual, I think that would help to identify your laptop with full p/n.

  Identify the same way I did in my signature with the full p/n, alphanumeric included acharcters.

  Kind regards
  ERICO

• Avoid checking "the guest operating system has locked the door of CD-ROM. disconnect anyway and replace the lock?

  Using PowerCLI, I'm trying to create a script that logs off the CD player and affects the client machine and Passthrough IDE using the command:

  Get-cddrive - VM SRVVM616 - netscan02.kb.se | game-cddrive - nomedia - confirm: $false

  * (where SRVVM616 - netscan02.kb.se is the VM name in this case)

  But I can't get rid of an audit question that arises in vSphere Client:

  'The guest operating system has locked the door of CD-ROM...

  Unplug anyway and replace the lock? »

  The script hangs until I answered the question, and who does the idea of a useless script?

  How can I avoid this issue?

  Maybe the method I described in answer to the question! could help.