Firepower - High CPU and latency

Similar Questions

• Acer aspire problem vn7 - 591 g nitro with high CPU and GPU temperatures

  Hello! I recently noticed some issues (lower fps) performance when you play semi demanding like cs and Overwatch, although pretty much the lowest settings. I went to download CPUID (software to monitor your hardware) to check my temperature and I noticed that I reach 90 low to high (depending on the game) when I play.

  I thought it might be dust or something inside so I removed the keyboard of the laptop part and used some canned air to remove any dust I could reach (without removing the motherboard). I also managed to get your hands on a laptop computer, cooling rack. The problem is that all these efforts really solved the problem. Just a slightly lower temperature on the GPU and about the same on the processors. I'm starting to wonder if it could be the thermal paste, which need to be replaced? I had the computer for a little over a year now. Does anyone else know similar problems? Help or advice would be appriecated.

  Hello

  The CPU and the GPU are designed to operate at these temperatures. If they are too high they will be the butterfly, and if even this does not then at some point they just instantly shut down to avoid any possible damage.

  Changing thermal paste may improve performance, but you will only get lower temperatures. Your CPU/GPU will probably run at higher clock speeds and will not throttle, but temperatures will be in the same range. But in my experience if you can change the thermal paste, you should.

  Also, you can use the laptop fan control that has the configuration for 591g and it may further increase the fan speed. I think, from the factory, the maximum speed of the fan is just about 60-70%.

  https://github.com/Hirschmann/NBFC/

• High CPU and RAM usage - laptop Dell w / Vista

  Hello

  I have read several posts and tried many suggested fixes, but none seems to work so far.

  Hardware: Dell Inspiron 1525, with 3G of RAM

  Operating system: Vista Home Edition Premium, SP2

  Problem: CPU high (~ 50%) and RAM usage (~ 50%) when ideling.  I did both a "clean boot" and boot into "Safe Mode with network" and neither seemed to make much difference and certainly has not resolved the problem.

  When I go to the 'task manager' is a process "svchost.exe" system which is the eater of resources.  I can move the tab "services", but I'm not really sure how to use the information presented.  This is where I'm stuck, as I said, I read a few other posts with similar (but not identical/software) and I've tried a few things but do not seem to be able to solve the problem.  Please let me know what the next logical steps are at this address.  Thank you.

  Mark

  Try to scan with malwarebytes free:
  http://www.Malwarebytes.org/products/malwarebytes_free

  Also update windows to the last available update.

  It might the ProfSvc (user profile Service). Try to connect to a different profile (user) and see if the problem is also present.

• High CPU and disk utilization slows down the response

  Two years, Pavilion dv7 - 2273ca running Windows 7 64-bit; Norton 360; IE8; Thunderbird; Microsoft Office 2007.  Tend to have several windows open at the same time.  For automatic updates

  Almost every day the laptop enters a period of very high CPU usage; often accompanied by high disk usage.  The response time of the laptop is compromised to the point that I often have to stop using it until activity slows.  I try to use the resource monitor, but do not know enough to say if the legitimate operations or something wrong.  Norton frequently shows svchost.exe and iexplore.exe as a heavy user of the CPU.

  Is this a normal behavior?  If not - any advice on how to identify the culprit?

  On the advice of a HP technician, I ran check disk, and then restore the system in August.  end hard drive.  System Restore did not difference in performance.

  Most of the processor have more of the base, there will be a CPU 0 and 1 for the dual core processors. Different colors are different carrots 0 and 1

  If you sort as I proposed that the highest CPU usage will float to the top, you have to watch it when your cpu pork starts to act up.

  The colors of disc are reading and writing, its hard disk is read or write data on the trays.

  A high utilization of the processor or disk can be considered normal at times, but should not go on constantly.and by dragging down the performance of the system

  Lets say you run a video in your browser, the CPU usage rises, running other programs can do the same thing.

  The disk activity can be high at times also, depends on what you do on the PC, but shouldn't be high all the time.

  http://www.TechRepublic.com/blog/window-on-Windows/learn-how-to-use-the-Windows-7-resource-monitor-for-effective-troubleshooting/3139

  http://www.PCWorld.com/article/241677/how_to_use_resource_monitor.html

• Windows Update causes high CPU AND not let me install Windows 10

  Windows 7 update has several issues:

  1 Windows Update Service causes the CPU usage high - CPU usually works 50% or more with a single SVCHOST.exe running.  I click with the right button on the SVCHOST entry in Task Manager-processes and saw all the services that SVCHOST is still running.  One at a time, I stopped and restarted them.  Finally, when I stopped the Windows Update service, the cpu immediately fell to almost nothing.  I rebooted and tested several times, and each time, it was Windows Update service that was causing the high CPU.

  2. Windows 10 Upgrade Advisor says I could upgrade to Windows 10, and get the icon Windows 10 is in the toolbar.  But it has failed to install several times.  Now, after stopping and restarting the service of updating (and I checked, it is started), the window get Windows 10 rises, is empty and goes.

  3. I ran the Update Diagnostic and got 1 error:

  Windows Update error 0 x 80070003(2016-04-04-T-04_56_09P)

  the Details of the Diag Windows Update window said:

  RootCause: RC-DataStore

  Error code: 0 x 80070003

  4. I tried to launch the 'Fixit' for update, but it did nothing.

  5. I tried to update Windows Update WindowsUpdateAgent30 - x 64 .exe Agent,

  but it fails with this message:

  "Windows Update Agent Installer has met a fatal error"

  6. when I try to start Windows Update-check for updates, it displays the dialog box "check for Updates" and activity indicator green runs and runs and runs for more than 10 minutes but nothing happens.  And when I check the view update history, it shows no updates, even though I know that I've run a LOT of updates in recent years.

  7. I thought to reinstall Windows 7.  I went to download from Microsoft, and when repair installation it activated my key it says that it wasn't a retail version, so check with the supplier (in this case HP).  I checked with HP and they said that this machine was is no longer supported.

  8. on the way I've renamed the folder C:\Windows\SoftwareDistribution-Windows SDOLD, force it to create a new (probably why it does not find the old updates).  IT did not help.

  So it seems to me this machine is expandable to 10 Windows (it meets the specifications and the Advisor to update Windows-10 said yes and installed the toolbar).  But something is wrong, probably with Windows Updater, and now nothing will be update or upgrade.  And I can't get a new copy of Windows 7.

  So, any thoughts?  I'm out of ideas.

  All I can say is to ensure that you have the latest Net framework installed manually 4.6.1
  https://www.Microsoft.com/en-US/Download/details.aspx?ID=49982

  And the most recent client update
  https://support.Microsoft.com/en-us/KB/3138612

  Also manually install it kb3136000

  https://support.Microsoft.com/en-us/KB/3136000

• High CPU and lag/freezing until the DVD tray is open

  A very strange thing that happens shortly after I burn or rip a CD.  After the burn/rip is finished and the tray ejects, I remove the CD and close the drawer.  Soon after, the computer's processor runs high 80 to 100% and everthing lags / freezes.  I pop open the drawer of the DVD and everthing goes back to normal.  I discovered this fix after days of troubleshooting.  Whats could be wrong?  Windows 7 64-bit SP1 / Asus U56E / Windows Media Player / installed at the factory of Matshita DVD / Intel Core i5 to 2.3 GHz/6 GB of RAM / thank you.

  Hello

  Have you made changes on the computer before this problem?

  Try the following and see if it helps.

  Method 1:

  Try to clear the list pane button after burning disc and see if it helps.

  
  Method 2:

  Uninstall and reinstall the drivers from CD/DVD drive and check if it helps.

  Update a hardware driver that is not working properly: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Method 3:

  Change user settings for Windows Media files and check.

  Open Media Player > file > library management.
  Select each library (video, music, photos, tv recorded [If you]) and check the paths that it manages, and make sure that it is not too close to the root of the C: drive

  Example: It should be likec:\users\ \Music and c:\users\Public\Music, no c:\users as they will cause the whole directory to re tree - index over and over (when you surf the web, or change files in your profile).

  Reference: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/windows-7-has-high-cpu-usage-and-slow-performance/b5c79a15-781b-455a-9003-6d305695fce0

  It will be useful.

• BBM BBM surveys: High CPU and data usage

  In recent days THAT BBM is to consume a lot of CPU and the cell is runing hot. I have 10-12 contacts and I use BBM 2 - 3 times a day to swap a few lines of text.

  Attached screenshots.

  Someone has an idea to solve the problem?

  Model: Z3 (STJ100-1)

  S/W release: 10.2.1.2977

  OS version: 10.2.1.3247

  Version BBM: 10.3.43.9

  Thank you.

  I followed this for over a week now.
  After the upgrade to OS to10.3, BBM seems to be stable and do not consume the battery, and the processor.
  Thank you.

• 12.1.3 regeneration of forms taking very high CPU and time

  I've recently updated 12.1.2 to 12.1.3 (+ RPC4) and a month of back 10.2.0.5 to 11.2.0.4 (+ CPP) on Solaris 10 64-bit with 2 nodes Applin and separate DB Node with 16cpu and 64 GB of ram with sufficient swap and @12 Go of LMSS.  While patches to upgrade and then the CPU is very high continuous - idle 0 UC 99.2 on DB Server user and, even if the workers are taken as 16 instead of 32 - default.

  More than 18 hours are taken and still only 1,500 jobs are completed and 2000 + remaining. With the help of adadmin with options for all products.

  Appreciate your help to accelerate this process.

  There is little improvement with your solution, but below the solution was really helpful: Oracle Applications DBA: Compilation of form against a 11g, database crashes or takes a very long time [880660.1 ID]

  Thank you

• Explorer.exe is consuming high CPU and memory?

  Please, please help me with Microsoft. For some reason some of my computer laptop (ACER Aspire 5750 g - i5 intel core, 4 GB Ram, 750 GB HARD disk) is having serious problems. Windows explorer.exe uses up to 90% of the CPU usage. I don't know what to do because I'm not a computer expert. Please help me!

  I feel bad he take step by step

  Hello

  Be sure to carefully check for malware.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• (Suddenly) Gets slow SQL queries, caused by high CPU and buffer high

  Hi all

  We lack a database of Oracle 11 g Enterprise Edition Release 11.2.0.3.11 - 64 bit Production.

  As a scheduled task, we lack a query:

  
  

  SELECT *

  DE (

  SELECT T. * , LAG( DATE_FROM, 1, NULL ) OVER (PARTITION BY OUR_ID ORDER BY DATE_TO ) AS PREV_FROM, LAG( DATE_TO, 1, NULL ) OVER (PARTITION BY OUR_ID ORDER BY DATE_ FROM ) AS PREV_TO, LEAD(DATE_FROM, 1, NULL ) OVER (PARTITION BY OUR_ID ORDER BY DATE_FROM) AS NEXT_FROM

  DE STOCK_A T

  OÙ OUR_ID = :B1 )

  WHERE DATE_FROM = : B2

  
  

  This query has run every minute for 3 years. The size of the STOCK_A table has increased some over the years: thousands of records go, no record out.

  
  

  Since last Sunday, we have huge performance problems. The query had a runtime of 0.02 seconds. Now it's up to 1.4 seconds. Since it must deal with thousands of lines, this considerable increase in execution time is problematic.

  
  

  When this query parsing, we discovered that the CPU has increased enormously. About 20% of the 90% of the runtime execution time. This is probably caused by the enormous increase of receives it from the buffer. Of thousands to millions. Given that we have not made any changes to the database instance, we're stuck as to how this performance problem suddenly appeared. It's literally from one day to the next.

  
  

  Someone at - it experience with this problem? Any help would be much appreciated.

  
  

  Kind regards

  
  

  Lupker
  

  I took a little longer than expected, but we have finally solved the problem.

  He seems to have been a bug in the application currently running on the database. A process in the application began to write many lines in the table as before. This behavior was expected, but what was not expected was the volume of 'same' records that were written in the table. So finally, we analyzed the data and indexes, and of course, the effectiveness of the index was strongly fell because of the unique, indexed values. Once we cleaned the duplicate lines and rebuild the indexes, we got our previous performance back after removal of the bug in the application of course. Simple enough, but we were so focused on a vice of the Oracle that we have overlooked the possibility that data could have been the cause of our problems. Who it was.

  Problem solved!

  Thanks to all those responding to this thread. Your help is very appreciated.

• Unresolved problems of high processor and Windows Update

  I have the same problems as many other people and it seems that Microsoft does not care their fixation.

  (1) Windows Update - updates runs for always (in days) without ever finding updates and uses 100% of CPU. I have updates installed until released in February 2016, since then, impossible to get more.

  (2) high CPU and memory for iphlpsvc. What is - why do I need?

  Running Windows 7 Home Premium SP1 under VirtualBox on a Mac.

  And no, I won't upgrade to Windows 10 (not that I could get updates even if I did!)

  Feel tempted to turn off Windows updates forever, everything they do is screw up my system.

  Andrea

  Seems good. Your Windows 7 is up to date. Please post again on the Microsoft Community Forums if you need help.

• Windows 7 update - slow download, svchost high CPU usage

  I have a problem downloading by using the Windows Update application. This problem started after January 2016.  In the past, the request of update seems to work without the use of the svchost high CPU and with a reasonable download time.  There is usually a delay until the download has started, but then they ended quickly.

  I have 4 computers: 3 running Windows 7 Pro (CPU - Intel dual, i5 & i7) and 1 running Windows 7 Home (Intel i3).  If the problem is not related to the CPU hardware as best I can tell.

  My update setting is 'check for updates but let me download and install ".

  The Windows Update process includes 3 steps:
  1. identify the important and recommended updates for your computer.
  2. the selection and download updates.
  3. the creation of the restore point and of the installation, the selected updates.

  My problem is step 2, download the selected updates.  This happens on all 4 systems, and I do not expect a download to be this CPU load.  The download time is too long on all systems 4.

  My online search for answers has been frustrating, but several posts said search for viruses, malware and Trojans.  I ran Malwarebytes (free), Windows Defender, Norton Security and ESET (online) on systems and no objects are found.

  My most recent experience involved my Lenovo 7847 system (Intel dual core). Monday, May 23, I checked the updates and there were 15 updates important and 3 optional updates listed.

  After reviewing the updates, I chose the 15 updates and started the download process.  The svchost.exe that is associated with the update happened to 45-60% CPU usage, update status showed no size or % finished and the task manager - network or explore the process did not show any activity download for a long time.

  Finally, after about an hour, the update showed the download size and the % downloaded.  Svchost usage remains high during the time of whole download.  Once the download is complete, the restore point was created and updates have been installed, who also took some time (but it would be I/O CPU & Drive dependent).

  The download status has not changed during most of the time that the download process is running.  The Task Manager and process explore both show very little network activity up to that very near the end of the download procedure. There is therefore no real indication that the process is blocked or just turn very slowly.   It almost seems that the Microsoft servers are overloaded, they delay the download for some reason, or the process svchost and sub-process fail to create good handshake with the server for download.

  My Questions:

  1. Why is svchost usage so high when nothing seems to happen?
  2. Why does take an hour or more to download the updates?  These aren't the huge file sizes, and this attempt to update was almost 2 weeks after Patch Tuesday, then Microsoft servers should not be overloaded.
  3. Why is the situation unchanged for so long during the download process?
  4. most important, what can I do to change this situation?
   
  Thanks in advance for your help.

  My 'update problem' seems to have changed.  Checking updates takes a lot of CPU resources and a lot of time.

  We will leave well enough alone for now. [It took 3-4 hours for MU download/install updates of June on my Win7 boxes].

  But please bookmark this thread. If the behavior persists in July - and especially in August, respond to this thread instead of starting a new. Good luck!

• High CPU, RAM HIGH Server 2.0

  Hi all

  I have VMWARE server installed 2.0 on windows server 2003, this machine has 32 gigabytes of RAM with 2 processors to dual-core (3.2 ghz) xeon.  I have 4 virtual machines will each activity 4 gigs of RAM a piece (assigned amount).  The machines are servers to test for our developers and get barely affected.  My problem is that when I reboot a virutal machine for like 15 minutes the machine freezes and I can't do anything with this guest operating system.  It is very annoying espically when you test something and need to reboot constantly.   I have serached through the forums, but since "high CPU" and "high memory" is if common is very difficult to sort through all this.

  Hello

  In my view, that a disk file is preserved to shadow ram invited.  I think remember me a post for some time there is a parameter that can be changed to stop this, but it can reduce the reliability as a result of an accident.

  Try to reduce the amount of ram on your comments and see if the boot process is faster.  You are starting the prompt or wake of a bet into hibernation?  If it's a State of hibernation, it touches the hard drive because the memory is reloaded, if several guests start at the same time it can have a signoficant impact.  He also the effects of the weather in the judgment of the host, so all guests are on hinernate to clodedown.

• High CPU consumption (always between 12 and 30%)

  I am running Firefox 9.0.1 for Mac. Until the upgrade to version 9.0.1 I had no use of high CPU problems... I've now must constantly between 12% and 30% of CPU and up to sometimes use much further than that, which really slows down my Mac to a point where I have to kill Firefox to use other applications.

  I have a new Mac mini with fast CPU and 8 GB of RAM.

  I tried to reinstall and also to disable the 4 Add-ons I have installed. After a new installation and all 4 disabled add-ons, I see exactly the same problem even with one tab open to google.com

  Any help from the community is very much appreciated.

  Thanks in advance...

  I've upgraded to Firefox 10 and this issue is now resolved.

• Satellite U500-18F - Karmic Koala high temperature CPU and WLAN issue

  Laptop: Toshiba Satellite U500-18F
  S.O. Linux Ubuntu 9.10 Karmic Koala

  I have two problem:

  (1) high CPU temperatures
  sensors command tell me: Core 65.0 0 ºC and Core 1 66.0ºC
  I did: "solution works on this issue of processor on Ubuntu 9.04 fan (and perhaps other distros too): Add acpi.power_nocheck = 1 to the kernel boot line" this line has been precisely.
  The temperature drops, but little.
  (2) it's no possible Enable Wireless

  Any help is appreciate.
  juanantonio

  Hi juanantonio,.
  If the chipset and its capabilities powersaving is no better supported you must live with temperatures a little higher...
  but it's a long way at the end of specification - your system should run stable - check it out!

  for the problem of wlan: go and find a driver/module for your wlan card, I guess it's a intel...
  or change it with a model better supported by the operating system.