Firewall always off at startup

Similar Questions

• Windows Firewall turns off automatically.

  Windows Firewall turns off automatically at startup, sometimes. I use Trend Micro Internet Security and Windows Security Center. They both have a firewall. (1) I always here you can only have one firewall at the time, is why that Windows Firewall turns off sometimes? (2) if so, why only sometimes? (I don't have Windows OneCare.) (3) should I manually turn off the Windows Firewall and just use the Trend Micro firewall? (4) that I will protect? Please answer 4 questions.

  I'm sorry, I wasn't clear enough in my question. I'm not asking for possibly a recommendation on what AV I have to use. I know not if I have to choose only one I'll choose Trend Micro. I wanted to ask what is the right way to turn off the Windows Firewall and make sure it stays off. When I open the Windows Security Center it shows firewall as YOU, but she does not have an option to OFF.

  Start button > in the search box, type windows firewall > look up, click onWindows Firewall > in the left column, click turn on or off Windows Firewall > the rest is self-explanatory.

  t-4-2

• Firewall turns off after Windows XP starts

  Hello

  I had the virus that has not seen the MS and MS Safty Scanner MS Security Essentials (MSE) malicious software removal (the value always protect).  It prevented the MSE to run.

  I downloaded Malwarebytes (no Scan option, no firewall or real-time).  He found the virus, the list is below shows what virus found where.  I uninstalled and installed a new MSE, he says that the machine is clean.

  Task bar indicators show my firewall consistantly goes off about 45 seconds after the start to the top, then turn about 30 seconds after the beginning upward.  (I note firewall controls are frozen before it turns off, it can be turned off from the start, just about 45 seconds for the PC to detect).

  The firewall configuration is does not (unknown error) while the firewall is disabled and setting off the power before.

  I'm running a fully updated MS Windows XP 32-bit, bridge 2005,.

  Now, I already tried a lot of things, including about six analyses of various companies.  I suspect there is still a compenent that nobody yet knows how to look.  Is there anyway to get MS to analyze my system to see what is out there, so that they can identify the virus, I think I have MSE reports, but there is no button to tell MS my computer is infected, so I think that there is no report.

  I'll probably have to find another XP operating system going offline, but my piece of bridge came not with all drives, so if there are unique drivers they may not work with windows 7 or later.

  Report of MBAM who finds a virus:

  Malwarebytes' Anti-Malware 1.44
  Database version: 3798
  Windows 5.1.2600 Service Pack 3
  Internet Explorer 8.0.6001.18702

  2010-02-26 20:39:17

  MBAM-log-2010-02-26 (20-39-17) .txt

  Scan type: Full Scan (A:\| C:\| D:\| E:\| F:\| G:\| H:\| I:\| J:\|)
  Objects scanned: 241411

  Time elapsed: 1 hour (s), 0 minute (s), 37 second (s)

  Memory processes infected: 0
  Memory Modules infected: 0
  Registry keys infected: 4
  Registry values infected: 1
  The infected registry data: 2
  Folders infected: 0
  Infected files: 0

  Process memory infected:
  (No malicious items detected)

  Memory infected:
  (No malicious items detected)

  Infected registry keys:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {1d4db7d2-6ec9-47a3-bd87-1e41684e07bb} (Adware.MyWebSearch)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {b64f4a7c-97c9-11da-8bde-f66bad1e3f3a} (Rogue.WinAntiVirus)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Software avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\Software\avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  The registry is infected:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\toaagomm (Trojan.FakeAlert.Gen)-> quarantined and deleted successfully.

  Infected registry data items:

  HKEY_LOCAL_MACHINE Center\AntiVirusDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Center\FirewallDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  Infected files:
  (No malicious items detected)

  Hello

  I had the virus that has not seen the MS and MS Safty Scanner MS Security Essentials (MSE) malicious software removal (the value always protect).  It prevented the MSE to run.

  I downloaded Malwarebytes (no Scan option, no firewall or real-time).  He found the virus, the list is below shows what virus found where.  I uninstalled and installed a new MSE, he says that the machine is clean.

  Task bar indicators show my firewall consistantly goes off about 45 seconds after the start to the top, then turn about 30 seconds after the beginning upward.  (I note firewall controls are frozen before it turns off, it can be turned off from the start, just about 45 seconds for the PC to detect).

  The firewall configuration is does not (unknown error) while the firewall is disabled and setting off the power before.

  I'm running a fully updated MS Windows XP 32-bit, bridge 2005,.

  Now, I already tried a lot of things, including about six analyses of various companies.  I suspect there is still a compenent that nobody yet knows how to look.  Is there anyway to get MS to analyze my system to see what is out there, so that they can identify the virus, I think I have MSE reports, but there is no button to tell MS my computer is infected, so I think that there is no report.

  I'll probably have to find another XP operating system going offline, but my piece of bridge came not with all drives, so if there are unique drivers they may not work with windows 7 or later.

  Report of MBAM who finds a virus:

  Malwarebytes' Anti-Malware 1.44
  Database version: 3798
  Windows 5.1.2600 Service Pack 3
  Internet Explorer 8.0.6001.18702

  2010-02-26 20:39:17

  MBAM-log-2010-02-26 (20-39-17) .txt

  Scan type: Full Scan (A:\| C:\| D:\| E:\| F:\| G:\| H:\| I:\| J:\|)
  Objects scanned: 241411

  Time elapsed: 1 hour (s), 0 minute (s), 37 second (s)

  Memory processes infected: 0
  Memory Modules infected: 0
  Registry keys infected: 4
  Registry values infected: 1
  The infected registry data: 2
  Folders infected: 0
  Infected files: 0

  Process memory infected:
  (No malicious items detected)

  Memory infected:
  (No malicious items detected)

  Infected registry keys:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {1d4db7d2-6ec9-47a3-bd87-1e41684e07bb} (Adware.MyWebSearch)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {b64f4a7c-97c9-11da-8bde-f66bad1e3f3a} (Rogue.WinAntiVirus)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Software avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\Software\avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  The registry is infected:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\toaagomm (Trojan.FakeAlert.Gen)-> quarantined and deleted successfully.

  Infected registry data items:

  HKEY_LOCAL_MACHINE Center\AntiVirusDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Center\FirewallDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  Infected files:
  (No malicious items detected)

  Please update a single thread... http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/Windows-XP-firewall-turn-off/394cce83-4ca8-4b47-b113-0cb59adf2da9

• Satellite L350 - display turns off during startup

  My screen laptop L350 itself turns off during startup after posting normally for about 2 seconds. It is possible to get the display back to normal if you go to sleep and then wake, but the new screen only stays on for about 2 seconds. This makes it almost impossible running the diagnostics.

  Does anyone have an idea what might happen?

  Hello

  Have you tried an external monitor?

  Perhaps the internal display is affected and needs to be replaced

• My automatic update does not illuminate. Even if I go into my control panel and try to turn it on from there he says always OFF.

  Even if I go into my control panel and try to turn it on from there he says always OFF. When I have a scan of my system, something back 'System broken leader' in the register of files that never deletes when I remove any spy software. Help, please.

  Hello

  Click on the following link and follow the steps in this article and check whether the problem is resolved or not.

  How to configure and use the automatic in Windows updates.

  Hope that helps.

• (1) how to reset the task in view/default Access Manager? __2) how could it have been modified?-my firewall is off, too. I am concerned about safety.

  When I open the window (in Windows Vista) Task Manager, it shows that the "Applications" tab  I can access is more 'Processes', tab 'Performance' and 'Network'... this just started recently.
  (1) how to reset the task in view/default Access Manager?
  (2) how could it have been modified?-my firewall is off, too. I am concerned about safety.

  Double-click inside the border/edge to bring it back to the default view for Task Manager.

  Malware scan:

  Download, install, upgrade and scan with Malwarebytes to check / remove Malware/spyware.

  If necessary, do all of the above work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

   

   

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  See you soon. Mick Murphy - Microsoft partner

• Windows Firewall turns off after a reboot

  Original title: Windows Firewall...

  I put my windows firewall on. When I restart my computer it is turned off, do I need to put it whenever I log on my computer?

  Hello

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  I suggest you follow the steps proposed by Azam K in the following link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Security/Windows-Firewall-turn-off-every-time-i-restart-my/2c7479fa-0dd0-4175-bfb9-212b86fc90f4

  I hope this helps.

• Creative suite 4 master collection of error installation will not install Premiere Pro, still, indesige, flash, ps4, sequelae.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running. 

  Creative suite 4 master collection of error installation will not install Premiere Pro, indesign, flash, Photoshop and AfterEffects.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running.  Running windows 7 64 bit.  Had no problem with installation on my last computer 64-bit windows 7

  It seems that everything is installed now.  Don't know how, but I think that I opened it as administrator.

  Thank you

  Corey

• Windows Defender is turned off at startup

  Hello

  Whenever I start my computer, Windows Defender is disabled & I have to turn it on manually. It's funny, because on my start up programs, I set it up so that it starts when my computer starts, and yet it is always disabled.

  Sometimes it lights fine, but other times it stays on until I try to do a scan. Sometimes, if I have a scanner, it turns off. I scanned my computer for viruses & malware but nothing came.

  This started after I updated my AVG for AVG 2011 a month ago.

  How can I solve this problem?

  Thank you.

  Before the last update AVG my windows Defender would automatically go to the beginning upward. How can I get it to start automatically again?

  M.Roman25,
  You have already been informed that AVG is supposed to turn Windows Defender because AVG has his own Defender.

  But, if you insist to know how to turn on Windows Defender, here's how...
  WARNING: you can't and you shouldn't have to, do that.
  Prepare AVG if he stops again.

  Assuming you are using Vista:
  Start button > in the search box, type Services> press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Firewall turns off several times

  My firewall triggering turns repeatedly so disconnect my PC from the internet. When I run the Troubleshooting Wizard, a message appears indicating "Troubleshooting cannot identify the problem. This problem is bugging me like anything. Please suggest me a solution for this

  Original title: Firewall problem definition

  Hello Ahmed,.

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. You did it of any significant changes to the computer before this problem?
  2. What anti-virus program is installed in the system?

  The question could arise if the antivirus program installed (if any) in the system has its own firewall which disables the firewall of Windows by default during the operation. To further diagnose the problem, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Follow the steps to configure the Windows Firewall service to start in auto mode:

  • Press the Windows key + R and type "services.msc". Press enter.
  • Locate the Windows Firewall service and right-click on it. Click on Properties.
  • Choose Automatic from the dropdown under Startup type. Also set the status of the service as a point of departure for the service.
  • Click on apply , and then click OK.

  Restart the computer and check if this solves the problem. If this is not the case, proceed to the next method.

  If the problem persists, try the following method.

  Method 2:

  I suggest to reset Windows Firewall to the default settings and check if this solves the problem. Follow the steps to do this:

  • Press the Windows key + X and click on Control Panel.
  • Go in Windows Firewall > restore defaults.
  • Click the "Restore defaults" button to confirm the operation.
  • Restart the computer and check if it starts automatically.

  If the problem persists, try the following method.

  Method 3:

  Try to turn off installed third-party anti-virus (as applicable) in the system and check if it helps.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Firewall turns off

  I own a MacBook 2015 Pro running El Capitan (10.11.4) and I have problems with the firewall.

  Despite them 'walk' and set up programs to allow access, whenever I go into the firewall settings is 'off '.

  How can I know what is turn it off and stop him being extinguished?

  You have installed what is called "Private access to Internet", or any other third-party VPN client software?

• Satellite A300-247 - always off model Logo

  Hello

  have a problem I bought the computer, Toshiba Satellite A300-247.

  The Satellite logo was always in Ohcshio fire off or how it would always be a crush

  Hello!

  To be honest I n don't know what you mean exactly. Do you mean the logo of the lighting of the keyboard?

  As far as I know the ignition of the laptop (multimedia keys, etc.) controls the added value the package so I think that you should reinstall this tool. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com/-online decision-making supported Downloads & => Download drivers

  Before installing the latest version, you must remove the older version first, and then restart the laptop. Now, you can install the new VAP.

  Furthermore, have you installed Windows updates? I had a problem with illumination after that I installed updates to Windows.

  Good bye

• Why Windows Firewall always stops when I turn on the computer - even if she did before? How can I keep it on recommended setting when I shut down the computer?

  I always change the tuning parameters recommended on Windows Firewall, when I turn on the computer, otherwise it reads in red writing "Windows Firewall does not protect your computer." The network location is the Public network.

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• Firewall turned off because I'm missing wzcsapi.dll

  Wzcsapi.dll missing whear I can download

  because I'm missing wzcsapi.dll impossible to turn on the firewall

  Hello

  1. What is the exact error message?

  2 is another security software is installed on your computer?

  3. are you referring to Windows Firewall?

  4 did you change on your computer before this problem?

  5. the version of Windows running on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Follow the suggestions and see if it helps.
  Method 1
  Run the fix of the article.
  Diagnose and automatically fix http://support.microsoft.com/mats/windows_firewall_diagnostic/en-us Windows Firewall service problems

  Method 2
  Run the System File Checker tool.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3
  a. click on start.
  (b) in the search box type services.msc
  c. right-click Windows Firewall and go to properties of .
  d. Select Automatic in the startup type menu in the menu drop-down.
  e. click on start .
  f. click on apply and OK.
  g. restart your computer

   

• My windows firewall is off and I can't find a way to turn it on!

  I left 'Technical Support' work remotely on my PC.  Now, I'm going to security to check what works.  Firewall Windows indicates that something is missing and you cannot activate!  How can I fix it. ........ I shot 'Tecxh Support' as they could not solve my other problems.    "Slow, Forgetfull, error messages, low volume USB port, stop working, etc..". »

  What antivirus you have installed?
  If your antivirus has included firewall, it can turned off your Windows Firewall.

  You can look at this article that can help with your problem.

  Article number: 914230 - you cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2
  http://support.Microsoft.com/kb/914230
   
  Let us know the results.