Firewall turned off because I'm missing wzcsapi.dll

Similar Questions

• Firewall turns off after Windows XP starts

  Hello

  I had the virus that has not seen the MS and MS Safty Scanner MS Security Essentials (MSE) malicious software removal (the value always protect).  It prevented the MSE to run.

  I downloaded Malwarebytes (no Scan option, no firewall or real-time).  He found the virus, the list is below shows what virus found where.  I uninstalled and installed a new MSE, he says that the machine is clean.

  Task bar indicators show my firewall consistantly goes off about 45 seconds after the start to the top, then turn about 30 seconds after the beginning upward.  (I note firewall controls are frozen before it turns off, it can be turned off from the start, just about 45 seconds for the PC to detect).

  The firewall configuration is does not (unknown error) while the firewall is disabled and setting off the power before.

  I'm running a fully updated MS Windows XP 32-bit, bridge 2005,.

  Now, I already tried a lot of things, including about six analyses of various companies.  I suspect there is still a compenent that nobody yet knows how to look.  Is there anyway to get MS to analyze my system to see what is out there, so that they can identify the virus, I think I have MSE reports, but there is no button to tell MS my computer is infected, so I think that there is no report.

  I'll probably have to find another XP operating system going offline, but my piece of bridge came not with all drives, so if there are unique drivers they may not work with windows 7 or later.

  Report of MBAM who finds a virus:

  Malwarebytes' Anti-Malware 1.44
  Database version: 3798
  Windows 5.1.2600 Service Pack 3
  Internet Explorer 8.0.6001.18702

  2010-02-26 20:39:17

  MBAM-log-2010-02-26 (20-39-17) .txt

  Scan type: Full Scan (A:\| C:\| D:\| E:\| F:\| G:\| H:\| I:\| J:\|)
  Objects scanned: 241411

  Time elapsed: 1 hour (s), 0 minute (s), 37 second (s)

  Memory processes infected: 0
  Memory Modules infected: 0
  Registry keys infected: 4
  Registry values infected: 1
  The infected registry data: 2
  Folders infected: 0
  Infected files: 0

  Process memory infected:
  (No malicious items detected)

  Memory infected:
  (No malicious items detected)

  Infected registry keys:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {1d4db7d2-6ec9-47a3-bd87-1e41684e07bb} (Adware.MyWebSearch)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {b64f4a7c-97c9-11da-8bde-f66bad1e3f3a} (Rogue.WinAntiVirus)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Software avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\Software\avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  The registry is infected:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\toaagomm (Trojan.FakeAlert.Gen)-> quarantined and deleted successfully.

  Infected registry data items:

  HKEY_LOCAL_MACHINE Center\AntiVirusDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Center\FirewallDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  Infected files:
  (No malicious items detected)

  Hello

  I had the virus that has not seen the MS and MS Safty Scanner MS Security Essentials (MSE) malicious software removal (the value always protect).  It prevented the MSE to run.

  I downloaded Malwarebytes (no Scan option, no firewall or real-time).  He found the virus, the list is below shows what virus found where.  I uninstalled and installed a new MSE, he says that the machine is clean.

  Task bar indicators show my firewall consistantly goes off about 45 seconds after the start to the top, then turn about 30 seconds after the beginning upward.  (I note firewall controls are frozen before it turns off, it can be turned off from the start, just about 45 seconds for the PC to detect).

  The firewall configuration is does not (unknown error) while the firewall is disabled and setting off the power before.

  I'm running a fully updated MS Windows XP 32-bit, bridge 2005,.

  Now, I already tried a lot of things, including about six analyses of various companies.  I suspect there is still a compenent that nobody yet knows how to look.  Is there anyway to get MS to analyze my system to see what is out there, so that they can identify the virus, I think I have MSE reports, but there is no button to tell MS my computer is infected, so I think that there is no report.

  I'll probably have to find another XP operating system going offline, but my piece of bridge came not with all drives, so if there are unique drivers they may not work with windows 7 or later.

  Report of MBAM who finds a virus:

  Malwarebytes' Anti-Malware 1.44
  Database version: 3798
  Windows 5.1.2600 Service Pack 3
  Internet Explorer 8.0.6001.18702

  2010-02-26 20:39:17

  MBAM-log-2010-02-26 (20-39-17) .txt

  Scan type: Full Scan (A:\| C:\| D:\| E:\| F:\| G:\| H:\| I:\| J:\|)
  Objects scanned: 241411

  Time elapsed: 1 hour (s), 0 minute (s), 37 second (s)

  Memory processes infected: 0
  Memory Modules infected: 0
  Registry keys infected: 4
  Registry values infected: 1
  The infected registry data: 2
  Folders infected: 0
  Infected files: 0

  Process memory infected:
  (No malicious items detected)

  Memory infected:
  (No malicious items detected)

  Infected registry keys:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {1d4db7d2-6ec9-47a3-bd87-1e41684e07bb} (Adware.MyWebSearch)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {b64f4a7c-97c9-11da-8bde-f66bad1e3f3a} (Rogue.WinAntiVirus)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Software avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\Software\avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  The registry is infected:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\toaagomm (Trojan.FakeAlert.Gen)-> quarantined and deleted successfully.

  Infected registry data items:

  HKEY_LOCAL_MACHINE Center\AntiVirusDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Center\FirewallDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  Infected files:
  (No malicious items detected)

  Please update a single thread... http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/Windows-XP-firewall-turn-off/394cce83-4ca8-4b47-b113-0cb59adf2da9

• Windows Firewall turns off automatically.

  Windows Firewall turns off automatically at startup, sometimes. I use Trend Micro Internet Security and Windows Security Center. They both have a firewall. (1) I always here you can only have one firewall at the time, is why that Windows Firewall turns off sometimes? (2) if so, why only sometimes? (I don't have Windows OneCare.) (3) should I manually turn off the Windows Firewall and just use the Trend Micro firewall? (4) that I will protect? Please answer 4 questions.

  I'm sorry, I wasn't clear enough in my question. I'm not asking for possibly a recommendation on what AV I have to use. I know not if I have to choose only one I'll choose Trend Micro. I wanted to ask what is the right way to turn off the Windows Firewall and make sure it stays off. When I open the Windows Security Center it shows firewall as YOU, but she does not have an option to OFF.

  Start button > in the search box, type windows firewall > look up, click onWindows Firewall > in the left column, click turn on or off Windows Firewall > the rest is self-explanatory.

  t-4-2

• Windows Firewall turns off after a reboot

  Original title: Windows Firewall...

  I put my windows firewall on. When I restart my computer it is turned off, do I need to put it whenever I log on my computer?

  Hello

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  I suggest you follow the steps proposed by Azam K in the following link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Security/Windows-Firewall-turn-off-every-time-i-restart-my/2c7479fa-0dd0-4175-bfb9-212b86fc90f4

  I hope this helps.

• Creative suite 4 master collection of error installation will not install Premiere Pro, still, indesige, flash, ps4, sequelae.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running. 

  Creative suite 4 master collection of error installation will not install Premiere Pro, indesign, flash, Photoshop and AfterEffects.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running.  Running windows 7 64 bit.  Had no problem with installation on my last computer 64-bit windows 7

  It seems that everything is installed now.  Don't know how, but I think that I opened it as administrator.

  Thank you

  Corey

• Satellite T130 - turns off because the low power

  My 130 just turns off without notice because of the low power, but it shows remaining 40-50% power bfore, it turns off. What is wrong with him?

  Also there is no warning of low power, it just turns off. Any ideas?

  Hello

  That s really strange and I've never heard of this problem...

  You use a Toshiba original AC/DC adapter?
  Have you checked the Web from Toshiba website for updates to the BIOS?
  Have you tested the same with OS preinstalled Toshiba?

• Windows Update error code: 80072EFE - (firewall turned off, MS Fixit ran and still does not) any other suggestions

  Hello

  We had our computer offline since February and that you try to update windows (we're on vista). We get the error 80072EFE code after a long wait.
  I have been through the forums and tried the microsoft fixit and turn off our firewall. It's the things that we tried-http://windows.microsoft.com/en-US/windows7/Windows-Update-error-80072efe-or-80072f76
  I need a few suggestions more...
  Thank you in advance. Kath.

  We had our computer offline since February and that you try to update windows (we're on vista). We get the error 80072EFE code after a long wait.

  I have been through the forums and tried the microsoft fixit and turn off our firewall. It's the things that we tried-http://windows.microsoft.com/en-US/windows7/Windows-Update-error-80072efe-or-80072f76

  I need a few suggestions more...

  Even if you * know * you just did this - that in that order...

  Check your time zone and time are correct.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to get updates.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to reinstall updates

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

• If I have my laptop, is why Windows Defender turned off because of group policy?... What is group policy?

  At the heart of the problem is this business of permissions.  Why solo owners of laptops not affiliated with companies or other computers must be prey to group policy and permissions at every turn.  I tried to turn off the UAC and I couldn't find even a file for group policy, and again I am forbidden to use Windows Defender because of this error message.  Only recently have I won control of most of my files and folders by disabling UAC and passing by claiming ownership of my own software and files.  I guess I really two questions: (1) how can I get rid of this feature to administer unnecessary and, as in the good old days, before Vista came, just use my computer without messages such as "you don't have permission to use this...» "and (2) my second question which dovetailed in the the first is" why the hell did I this stupid message from group policy?  There is no groups affiliated with my Compaq Presario, and in fact, it is not a group on my system folder in the first Subscriber.  I'm not very impressed with Vista or Windows Defender.  I could even ignore these problems, but there is a principle here.  I've read enough Articles to understand that I'm not the only person facing this nonsense!

  You cannot change how permissions work under Vista.  The administrator has certain rights and access; However, even for administrators, several parts of the system do not have access (because they are points of junction to towards the rear compatabiility and must not be changed or your programs do not work or because they are system files, you do not make changes.)  Despite this, some of these areas can still be accessed at your own risk - you may do something that can repair only a clean install), I provided the following information about permissions and ownership (which can help you navigate the system correctly and without causing any damage).

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  =======================================================================================================================

  Regarding Windows Defender the most likely reason it is disabled because you have installed an AV or security suite program that does so automatically during its installation (and it was probably necessary for the new software works correctly without causing any problem).  What AV or Security Suite program do you use?

  Regarding group policy, if you wanted to access it go to start / search box and type gpedit.msc and enter and then double-click on the program that appears in the search results.  These AV programs and security can use Group Policy to disable Windows Defender (I don't know how they do it), but it may be there somewhere).  Because re-activate NOT Windows Defender while the other this software is still installed on your system that could cause some conflixts, freezes, crrashes, corrupt and data files and all kinds other problems - it has been disabled for some reason.

  If you want to use Windows Defender, then choose a program or AV security suite which does not disable the Defender during the installation.

  =======================================================================================================================

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Firewall turns off several times

  My firewall triggering turns repeatedly so disconnect my PC from the internet. When I run the Troubleshooting Wizard, a message appears indicating "Troubleshooting cannot identify the problem. This problem is bugging me like anything. Please suggest me a solution for this

  Original title: Firewall problem definition

  Hello Ahmed,.

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. You did it of any significant changes to the computer before this problem?
  2. What anti-virus program is installed in the system?

  The question could arise if the antivirus program installed (if any) in the system has its own firewall which disables the firewall of Windows by default during the operation. To further diagnose the problem, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Follow the steps to configure the Windows Firewall service to start in auto mode:

  • Press the Windows key + R and type "services.msc". Press enter.
  • Locate the Windows Firewall service and right-click on it. Click on Properties.
  • Choose Automatic from the dropdown under Startup type. Also set the status of the service as a point of departure for the service.
  • Click on apply , and then click OK.

  Restart the computer and check if this solves the problem. If this is not the case, proceed to the next method.

  If the problem persists, try the following method.

  Method 2:

  I suggest to reset Windows Firewall to the default settings and check if this solves the problem. Follow the steps to do this:

  • Press the Windows key + X and click on Control Panel.
  • Go in Windows Firewall > restore defaults.
  • Click the "Restore defaults" button to confirm the operation.
  • Restart the computer and check if it starts automatically.

  If the problem persists, try the following method.

  Method 3:

  Try to turn off installed third-party anti-virus (as applicable) in the system and check if it helps.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Firewall turns off

  I own a MacBook 2015 Pro running El Capitan (10.11.4) and I have problems with the firewall.

  Despite them 'walk' and set up programs to allow access, whenever I go into the firewall settings is 'off '.

  How can I know what is turn it off and stop him being extinguished?

  You have installed what is called "Private access to Internet", or any other third-party VPN client software?

• What would make my firewall turn off for a few minutes every time I turn on the computer.

  Whenever I turn on my laptop, the red icon shows in the task bar telling me that the windows firewall is disabled. I click on the ball and at the time that Security Center opens the firewall is turned back on. Anyone know why this is happening?

  I appreciate all help. Thank you

  Hi SuePerry,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can run the fix it from the link below and check if it helps.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us?EntryPoint=lightbox

  Method 2: If the method above does not help, then you can refer to the following Microsoft Knowledge Base article and check.

  You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2

  http://support.Microsoft.com/kb/914230

   

  Note: The firewall is software or hardware that checks information coming from the Internet or a network. Firewall blocks some information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.

  Let us know if it helps.

• Remote Desktop win7 sharing - > XPPro only with firewall turned off?

  I'm trying to set up a simple office remotely. All the computers are on a local network. I want to run the desktop sharing of my new Win7 box for my old XP Pro box. I just completely wiped and reinstalled XP Pro. Here's what happens:

  With the firewall WE on the XP box, I can't use the computer name to connect. I get an error message. However, I can use the IP address to establish a remote desktop connection.

  When I then disable the firewall in the XP box and close the session, I can also use the computer name to establish a connection. This connection is live, even if I then re-enable the firewall. But once I log in, I'm back using the IP address.

  It seems to me that if something needs to be changed in the XP firewall, but what is?

  Thanks for posting if you have an idea.

  Hi vistauser111,

  We recommend that you change/reduce the security settings in Avira Security software and check the result.

  Step 1: If the problem persists, we recommend that you visit the Windows updates to see if there are updates available for the remote desktop connection client and install it.
  see How to keep your Windows up-to-date .

  Step 2: If the problem persists, try the following steps and check the result:
  a. open the article: http://support.microsoft.com/kb/310353
  b. method 2, follow steps 1 and 2, and then restart the computer to see if the problem persists.
  c. If the problem does not persist in the boot, then follow step 3 and step 4 to find out which is the origin of the problem, and once you have found the culprit, uninstall the program and check the result.

  Note: Don't forget to follow the steps in the steps to configure Windows to use a Normal startup state"" section.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photoshop will not now work because of a missing MSVCR120.dll file. Can someone help me solve this problem?

  whenever I try to open photoshop I get a message saying "the program can't start because msvcr120.dll is missing on your computer. Try reinstalling the program to fix this problem. »

  I uninstalled and reinstalled photoshop once already and I can not find other solutions, can someone please?

  See this link:

  https://helpx.Adobe.com/Photoshop/KB/msvcr120-DLL-is-missing-Windows-7-Photoshop-CC-2015-. HTML

• How to stop the circle of blue on the mouse pointer when the machine turns off

  Regarding Photosmart 5510e printer all in one product No.CQ183B... Model No.B111h... Serial number {content removed}

  Cannot get rid of the attatched blue circle to the pointer of the mouse when the computer is turned off, because it is the noisiest printer that I have ever bought, it even guard the neihgbours awake. Thers seems there have much the same complaint of the HP printer owners concerning the blue circle. Advice please, thank you jh

  Most likely the computer is looking for the printer for features such as Scan computer and alerts the ink. Disable these features should stop the blue circle of projection. Double-click the printer on the desktop icon to open the Printer Wizard. Double-click the ink level chart found at the top of the window. Click the Advanced tab. Under Alerts ink make sure the box "only when I print" is selected, and then click close at the bottom of the window. Double click on manage the Scan of the computer. Click on disable. Close all open windows. This should stop the computer from looking for the printer when it is turned off. Let me know what happens.

• Help needed to turn off

  Hello.  I loaded PSE8 earlier this year and used a few times with success.  I have not used for some time and now may not seem to access, is no longer an icon on my computer to start.  There are files on the hard drive (sorry I not am not very computer savvy) and there is a folder called "Photoelementsfileagent.exe" but if I click on that it brings up a black box with a text that says "Adobe Active File Monitor Service started.  I had an idea that I could load the disc again and maybe it would repair all that seems to have disappeared, but it took me down the road to uninstall the program.  I stopped because I can't access the program to disable everything first.  Now I'm stuck.  I can't open the program to turn it off, and I don't know what else I can do to run what is clearly already loaded on my computer.  I hope that makes sense for someone who can help out me!  Thanks a lot in advance.

  You don't need to insist on the deactivation of this situation. Activation is related to your hardware, so if you uninstall / reinstall on the same drive, you should be good, even without turning off, because you must always show as enabled on this computer, then you do not use your activation others. If you get a new hard drive, it's different.