Firewall high availability cisco asa can be divided into stand-alone license
I have two ASA5545-X with HA/active license and now my client has changed the designated and wants to divide these into stand-alone firewall. How will this affect the license? Y at - it no problem with that, or they will be able to run just fine as standalone firewall?
Thank you
Howard
Hello
To my knowledge if the client has obtained the ASA5545-x firewall initially with identical licenses it should be no problem using them separately.
Because your customer is currently using Active/active failover, this already means that firewalls are in multiple context mode. In turn, this means that he or she was not able to use all the VPN features licensed on the ASA pair and therefore received no VPN license on each unit.
So it seems to me that, given the information you have so much that there should be no problem using the firewall separately.
The single license related thing I can think of at the moment, it is that if you want to keep them in multiple context mode and only acquired license of security context for the other.
-Jouni
Tags: Cisco Security
Similar Questions
-
Can I convert my license creative cloud in a stand-alone license for Lightroom?
Hello
After a few months, I realized that I have one license per month. I really want to buy a stand-alone license and have my own software. What can I do? Thank you
Hi clap
CC of Lightroom is based subscription product that comes with Photoshop in photography Package(or any other plan)
It can not be changed for a stand-alone product
A product independent 6 Lightroom is available Separately.See products
Let us know if this helps
Concerning
~ Assani
-
Can I put a stand-alone version of Lighroom5 student to a stand-alone version of Lightroom6 student?
Do you know how or where I can buy the version full version student LR6?
My mistake.
There is no version student and teacher of LR6. Sorry about that.
Teacher version & Lightroom 6 (Standalone)
Options:
- Buy the upgrade of LR6 (not student) retail version
- Join the Cloud
-
Can I install a stand-alone version of Lightroom on my IMac and my MacBook Pro and then use an external hard drive to store all my photos?
Yes. To keep both computers synced, keep a copy of your catalogue on the EHD also.
-
Configuration of the Cisco etherchannel stack: flag stuck in stand alone
I'm putting in place an etherchannel for my stack of Cisco (switch Catalyst 3750 G x 2), with a port on each switch the etherchannel. The example of battery cross http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00806cb982.shtml using as a guide, I created my channel. However when I discovered "show etherchannel summary 6 ' it says that both my ports are stand-alone, when I want them to be in port channel grouped in. Thank you in advance for your help, I added all the information I could think.
Here is how I created the etherchannel
sailing-sw-1 #conf t
sailing-sw-1 (config) #interface gigabiteethernet 0/1/10
active in sail-sw-1(config-if) mode #channel-group 6
sailing-sw-1(config-if) #switchport trunk encapsulation dot1q
sailing-sw-1(config-if) #switchport mode trunk
sailing-sw-1(config-if) #exit
sailing-sw-1 (config) #interface gigabiteethernet 0/1/10
active in sail-sw-1(config-if) mode #channel-group 6
sailing-sw-1(config-if) #switchport trunk encapsulation dot1q
sailing-sw-1(config-if) #switchport mode trunk
sailing-sw-1(config-if) #exit
sailing-sw-1 (config) #exit
The running-config
sailing-sw-1 #show running-config
Building configuration...
Current configuration: 5390 bytes
!
version 12.2
no service button
horodateurs service debug uptime
Log service timestamps uptime
no password encryption service
!
sailing-sw-1 hostname
!
boot-start-marker
boot-end-marker
!
Select the 5 secret...
!
!
!
high-level description of the cisco-global macro
No aaa new-model
1 supply ws-c3750g-24ts switch
2 available ws-c3750g-24ts switch
mtu 1500 routing system
Uni-directional aggressive
!
!
!
MLS qos map cos-dscp 0 8 16 24 32 46 46 56
!
Crypto pki trustpoint TP-self-signed-538118016
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 538118016
revocation checking no
rsakeypair TP-self-signed-538118016
!
!
TP-self-signed-538118016 crypto pki certificate chain
certificate self-signed 01
30...
AF
quit smoking
!
!
!
errdisable recovery cause link-flap
60 errdisable recovery interval
port-channel - the balance of the load src-dst-mac
!
spanning tree mode rapid pvst
spanning tree default loopguard
No spanning tree optimize transmission of bpdus
spanning tree extend id-system
!
internal allocation policy of VLAN ascendant
!
!
!
Interface Port-channel6
!
GigabitEthernet1/0/1 interface
No auto mdix
!
interface GigabitEthernet1/0/2
No auto mdix
!
interface GigabitEthernet1/0/3
No auto mdix
!
interface GigabitEthernet1/0/4
No auto mdix
!
interface GigabitEthernet1/0/5
No auto mdix
!
interface GigabitEthernet1/0/6
!
interface GigabitEthernet1/0/7
No auto mdix
!
interface GigabitEthernet1/0/8
No auto mdix
!
interface GigabitEthernet1/0/9
No auto mdix
!
interface GigabitEthernet1/0/10
switchport trunk encapsulation dot1q
switchport mode trunk
No auto mdix
active in mode channel-group 6
!
interface GigabitEthernet1/0/11
No auto mdix
!
interface GigabitEthernet1/0/12
No auto mdix
!
interface GigabitEthernet1/0/13
No auto mdix
!
interface GigabitEthernet1/0/14
No auto mdix
!
interface GigabitEthernet1/0/15
No auto mdix
!
interface GigabitEthernet1/0/16
No auto mdix
!
interface GigabitEthernet1/0/17
No auto mdix
!
interface GigabitEthernet1/0/18
No auto mdix
!
interface GigabitEthernet1/0/19
No auto mdix
!
interface GigabitEthernet1/0/20
No auto mdix
!
interface GigabitEthernet1/0/21
No auto mdix
!
interface GigabitEthernet1/0/22
No auto mdix
!
interface GigabitEthernet1/0/23
No auto mdix
!
interface GigabitEthernet1/0/24
No auto mdix
!
interface GigabitEthernet1/0/25
!
interface GigabitEthernet1/0/26
!
interface GigabitEthernet1/0/27
!
interface GigabitEthernet1/0/28
!
GigabitEthernet2/0/1 interface
No auto mdix
!
interface GigabitEthernet2/0/2
No auto mdix
!
interface GigabitEthernet2/0/3
No auto mdix
!
interface GigabitEthernet2/0/4
No auto mdix
!
interface GigabitEthernet2/0/5
No auto mdix
!
interface GigabitEthernet2/0/6
!
interface GigabitEthernet2/0/7
No auto mdix
!
interface GigabitEthernet2/0/8
No auto mdix
!
interface GigabitEthernet2/0/9
No auto mdix
!
interface GigabitEthernet2/0/10
switchport trunk encapsulation dot1q
switchport mode trunk
No auto mdix
active in mode channel-group 6
!
interface GigabitEthernet2/0/11
No auto mdix
!
interface GigabitEthernet2/0/12
No auto mdix
!
interface GigabitEthernet2/0/13
No auto mdix
!
interface GigabitEthernet2/0/14
No auto mdix
!
interface GigabitEthernet2/0/15
No auto mdix
!
interface GigabitEthernet2/0/16
No auto mdix
!
interface GigabitEthernet2/0/17
No auto mdix
!
interface GigabitEthernet2/0/18
No auto mdix
!
interface GigabitEthernet2/0/19
No auto mdix
!
interface GigabitEthernet2/0/20
No auto mdix
!
interface GigabitEthernet2/0/21
No auto mdix
!
interface GigabitEthernet2/0/22
No auto mdix
!
interface GigabitEthernet2/0/23
No auto mdix
!
interface GigabitEthernet2/0/24
No auto mdix
!
interface GigabitEthernet2/0/25
!
interface GigabitEthernet2/0/26
!
interface GigabitEthernet2/0/27
!
interface GigabitEthernet2/0/28
!
interface Vlan1
the IP 192.168.0.1 255.255.255.0
!
default IP gateway - 192.168.76.102
IP classless
IP http server
IP http secure server
!
activate the IP sla response alerts
!
!
Line con 0
line vty 0 4
password Mil19
opening of session
line vty 5 15
password Mil19
opening of session
!
end
Interface port-channel 6
(in the example, there should be this line "identified in this channel: Gi2/article-gi1/0/10 0 / 10 ')
sailing-sw-1 #show interfaces port-channel 6
Channel6 port is down, line protocol is down (notconnect)
Material is EtherChannel, address is 0000.0000.0000 (bia 0000.0000.0000)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
KeepAlive set (10 sec)
Link auto-duplex type, automatic speed is automatic, media type is unknown
input stream control is turned off, output flow control is not supported
Type of the ARP: ARPA, ARP Timeout 04:00
Last entry, never, never hang output
Final cleaning of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0
Strategy of queues: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bps, 0 packets/s
5 minute output rate 0 bps, 0 packets/s
0 packets input, 0 bytes, 0 no buffer
Received 0 emissions (0 multicasts)
0 Runts, 0 giants, 0 shifters
entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored
Watchdog 0, multicast 0, break 0 comments
entry packets 0 with condition of dribble detected
exit 0 packets, 0 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, collision end 0, 0 deferred
carrier, 0 no carrier, lost 0 0 output BREAK
output buffer, the output buffers 0 permuted 0 failures
EtherChannel 6 Summary
sailing-sw-1 #show etherchannel 6 Summary
Flags: - Low P - D bundled in port-channel
I have - autonomous s - suspended
H Eve (LACP only)
R - Layer 3 S - Layer2
U - running f - cannot allocate an aggregator
M - don't use, minimum contacts not satisfied
u - unfit to tied selling
w waiting to be aggregated
d default port
Number of channels: 1
Number of aggregators: 1
Protocol for the Port-Channel port group
------+-------------+-----------+-----------------------------------------------
6 Po6 (SD) LACP Gi1/0/10 (I) Gi2/0/10 (I)
Hello
It seems that the grouping of NIC Linux box does not work properly. Please
Check on the side of Linux.
Kind regards
NT
-
I would like to download full standalone installer for Windows XP and Vista x 86 for Net Framework 1 to 4. If anyone can provide the links for XP and Vista x 86 it would be appreciated.
Hi Victor Moreau.
Thanks for posting in the Microsoft Community.
I understand that you want to download the stand-alone installer for .NET Framework 1.0 to 4.0 for Windows XP SP3 x 86.
I suggest you download links to install older versions of .NET:http://www.microsoft.com/net/download
-
How can I download LR6 stand alone and install
How can I download stand-alone LR6 and install
Thank you very much
-
Can I install a stand-alone of Lightroom 5 on two computers
I bought a Lightroom 5 stand-alone version. I installed it on my desktop. I'm taking a course in Lightroom and must use a laptop for the class. Can I install LR5 on the laptop, or do I buy an another "license"?
Yes, you can install both machines by your license agreement.
-
When you use a button to send the PDF PDF form can be divided into two?
Hello
I have a PDF form which consists of two pages - the second help autofilled data from boxes filled with page 1.
I asked when the form is completed and the user presses the button submit, if the PDF file can be contacted only two files then page 1 and 2 of each its own PDF by email, but for the same recipient?
Except that they use Adobe Acrobat in order to transmit the file, more.
-
How can I download a stand-alone copy so I can install on the web?
I need to be able to do the installation on a Win 7 Desktop on a closed network.
Unlike the response above, you should always download only of a link/site of Mozilla.
You can download the full installer for the current version from the link below (select the language of the operating system and interface), save or copy on pin/thumb/USB, transport to the other installation system and run the installer.
-
Where can I download a stand-alone version of LR 5?
Where can I download a standalone version (i.e., non - Creative Cloud) LR 5? I had to replace a failed hard drive with a new drive. I have a valid license of LR 5 when I downloaded the app a few upgrade LR 4 months ago. Thank you.
Lightroom - all versions
Windows
http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
-
Can I buy a stand-alone of Adobe Illustrator, or am I obliged to pay the fee of CC?
I really want to buy a copy of Illustrator because I saw that it is an incredibly useful tool for work I do, however I would like to buy a copy and confess to always and not pay a subscription of the CC? I am a student with a very limited income and therefore pay the subscription (even with the student discount) is not the path I want to take. Is it possible for me to do this? (Even with Photoshop and first)
Thank you
Jamie,
You can buy versions CS6 and full suites with the student discount:
http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html
You can calculate the sum of the price of each product and compare with suites, keeping in mind that you get a completely different when still a student price.
This can make a value really seen what applications you may want to use in the future, or perhaps rather what applications you are quite sure you will never want to use (insofar as that is possible), as part of the comparison and the decision.
-
Can you distribute a stand-alone single edition folio app?
Currently I use the viewer Adobe content to distribute Folio for a couple of clients. A customer want only edition folio created apps, but don't like the idea of them being in iTunes. Is it possible with distribute (publish) a single folio app outside of iTunes edition? In the same way you can create any type of iPad application and create an installable package without going through iTunes...
Thanks for any help,
Greg B
The only way to do this is to create a developer version of the app but it
will expire and will be limited to 100 UDIDs.
In short, it will not happen without enterprise-level accounts
with Apple and Adobe and is still subject to restrictions of license defined
by Apple for the distribution of the app.
Bob
-
Where can I download a stand-alone for 11.6 Installer?
The link here installs 11.5: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header
https://www.Adobe.com/products/flashplayer/distribution3.html
-
I have two ASA 5520 s. We have an ID card and we didn't. This makes the wizard high availability fail. Can I manually configure high availability. I don't really need two ASA-SSM-20 s. I just want to have an ASA in standby mode. Is this possible. Does anyone have a configuration similar to that?
Thank you
Alex Pfeil
The hardware should match. If you want to switch then remove the Sam from the primary or add one in high school.
Sent by Cisco Support technique iPhone App
Maybe you are looking for
-
Pavilion 15 ab268ca: laptop HP Pavilion 15 5 GHz Wifi upgrade?
Model: HP Pavilion 15 ab268ca laptop (http://h20386.www2.hp.com/CanadaStore/Merch/Product.aspx?id=T0E05UA & opt = ABL & salt = NTB) Wireless card installed: (1 x 1) 802.11b/g/n and Bluetooth® 4.0 combo Hey guys! I recently bought this laptop new. Wi
-
I clicked on the yahoo mail, it opened the page but then freezes showing what it it still happening.Same thing happens when google page open for research.
-
Hi allI bought satellite M40 of Toshiba HK (06/14/05) and go back to my country "Egypt".and facing problem for her, in Egypt and sent to the agent of toshiba of the Egypt they said need new motherboard, this was done on 25/07/05and until now, they do
-
Why am I redirected some proxy site when I try to go to Netflix?
On Safari 9.0.3, everytime I try to go to Netflix by searching or by typing the full url, I am constantly redirected to this site Web TVUnblock.com. It didn't happen before today, I don't know what has changed or what details to give to the situation
-
How to choose bits to a hexadecimal number?
I have a list of hexadecimal number (a single column with "n" lines). Leave the list to be named 'A '. Each hexadecimal number, after conversion to binary, I need to 9 bits, choose the right end (d0, d1, d2... D8) and label as X. Then the 9 consecuti