Firewall packages, caps, and Applet
HelloI'm new in Java Card technology, and I doubt a thing. I have three Java packages in my school project. My JavaCard applet is placed inside one of them, and this applet uses instances of classes that are placed in the other packages. I don't know if I understand, but the converter will make a PAC file each of my packages (this means three packages)? Can I install all of those packages on JavaCard and how to use them?
It's a bit confusing to me. I'd be firewall to worry since there are different hats?
Or should I place all of these classes within a single package and just install a PAC file that will be generated for the whole package?
Thank you
Neven
Edited by: 847201 the 24.03.2011. 14.55
847201 wrote:
I don't know if I understand, but the converter will make a PAC file each of my packages (this means three packages)?
That is right. For each package referenced by another package, you will also get an EXP file. It is mainly used to connect the packages at the time of the conversion.
Can I install all of those packages on JavaCard and how to use them?
As long you load packages in the correct order for each package that is used in a PAC file is already on the map, there is no difference in your code to use classes. The only difference is that the order of loading must be correct.
It's a bit confusing to me. I'd be firewall to worry since there are different hats?
The firewall of the applet is more for when you have several applet tries to access the same data. There are different requirements for a library package (for example, what can be done in a constructor) so you should read about it in the documentation of JC and the plug. There is overhead to access the instance methods on your class, as the firewall will check to see if there is a change of context that is required. The book Card (TM) Java technology for smart cards: Guide to the Architecture and the programmer has a good article on the firewall of the applet.
Or should I place all of these classes within a single package and just install a PAC file that will be generated for the whole package?
If you do not need to reuse code among different applet that will work as well. If your project becomes too large, you will need to split as there are limits on certain things in the spec FRENCH_TRAVELLER_64 such as the number of classes and methods, etc. When we have reached this limit, we had a significant amount of code, so I doubt that you will hit this limit with a school project.
See you soon,.
Shane
Tags: Java
Similar Questions
-
HP dv5 1002nr: mobile caps and the number key at the same time blink once
I was doing some updates on the computer when the power of the battery is dead and when the power cord I had a black screen and the caps and digital key will appear to blink once at the same time. I upgraded the operating system about 1 months ago for Windows 7 and it works fine until the updates have started to update.
Hey there @Masen2016!
Thanks for the reply as on caps and numlock lights blink once each time.
This indicates that it could be a problem with the processor,
And you cannot pass a processor on a laptop as the system in the BIOS configuration is written in.
If you upgrade a laptop part would be a malfunction.
So, you can contact HP and get the machine.
Link to contact HP: http://hp.care/2bkTGBQ
Have a great day!
-
Apple never shows the size of the file download updates? I have little download caps and would like to know the size of the file before downloading. Also to take advantage of free download period... 02:00 until 08:00 is there a way to plan downloads?
Yes. Informed of an update, select "install tonight". The downloads will be scheduled to occur at 02:00 local time.
Make sure that your MBA is connected to the power of this night there.
-
Ms. keyboard reverse caps and tiny state
My wireless keyboard (model comfort Sculpt) upon return of fashion 'sleep', randomly reverse the State of caps and lower case parameters (sometimes it is and sometimes it isn't). When the indication of keyboard on screen is set to caps, lowercase characters appear on the screen and in the same way, when the indication of the display is set to lowercase, uppercase, characters are displayed. At present, the only way to recover seems to be to restart the PC. Is this a common problem or make me a defective keyboard? There is a readily available solution for this problem?
[Moved from comments]
Hi Marc,
Let us know a few details about the issue.
1. What is the brand and model of the computer?
2. what version of Windows operating system has been installed on the computer?
3. have you tried to search the issue with another keyboard?
I suggest you run the hardware and devices Troubleshooter to check. Go through the link that run.
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
I suggest you to search the question the State of clean boot and check.
Clean boot: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to perform a clean boot for a problem in Windows 8, Windows 7, or Windows Vista
http://support.Microsoft.com/kb/929135
Note: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem
Let us know the State of the question, so that we can help you further.
-
I had some trobele with my computer and had to take it when I got it. The firewall was working fine. I do not know
If you date something on it so that it remains not.
I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok
Hey Roscoe,
If you're still using MSE, I doubt there's this problem. This made a few changes to the Windows Firewall during installation (if necessary), but certainly nothing that would cause it to turn on and off like that. It could be malware (malware can cause anything), but frankly more sounds like a file systems or corruption or some type of problem with your Windows Firewall or security setting or your operating system in a more general sense rather than the malicious software. I will refer you to experts who specialize in this kind of thing, but if they tell you it's a malware problem, then come back here and we will be happy to help you solve it.
For that matter as described, please post here to get the best advice from specialists in this: http://answers.microsoft.com/en-us/windows/forum/security?tab=all which will be more than happy to help you. You will probably need to uninstall the other firewall you have installed so they can diagnose the problem properly and without hindrance (not just disable it, but completely uninstall to be sure) - but they can tell you more on this subject. Don't forget up next to the Windows Version to use the dropmenu to choose your version if you find yourself in the most appropriate forum for your system.
I hope this helps.
Good luck!
-
Question of firewall Web sites and Https. Help me please.
I am trying to connect to an Https site and I get the message "internet explore cannot display the webpage." When I run a diagnostic check, he returned with the message "unable to connect to the Internet via HTTP, FTP and HTTPS. This is probably caused by the settings of firewall on this computer. Check the firewall settings for HTTP port 80, 443 HTTPS port and port 21 FTP". I use Windows XP and a dell computer. I tried to change my firewall settings and disabled my firewall even temporarily, and I can always log on the site. I have already connected to this site by the same internet provider on another computer (which unfortunately is no longer available for use at that time). I need to use this site for work purposes. Can you help me?
Hello
· What version of internet explore are you working on?
· Were there any changes made on the computer before the show?
I suggest you try the steps listed in the links below: how to manually open ports in Internet Connection Firewall in Windows XP: http://support.microsoft.com/kb/308127
"Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer: http://support.microsoft.com/kb/956196
Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357
-
Problem started when the McAfee Firewall shuts off and I could not turn it back on. Also I can't activate Windows error 0x8007042c firewall. Also no Internet access due to firewall restrictions. Tried to manually turn the Windows Firewall service (as an administrator), but now get error 1068: the dependency service or group could start. Strangely, the McAfee Firewall seems to be OK again?
McAfee and click OK in the same sentence? Hmmm... Take a look at this site for some good information and instructions for the removal of malicious software.
http://www.selectrealsecurity.com/malware-removal-Guide/
I hope this helps.
-
Help, please.
trying to get my windows media player works it stopes working it says Media Player fitted cap and it is said that com is missing
I have no idea of what to do combat it if all that can help I would appreciate it so much I am so lost and don't know was to begin.
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------
After the above, which could correct the problem and should be considered as pprerequisites:
Solve problems in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-PlayerSupport for technical problems of Windows Media Player
http://support.Microsoft.com/ph/7763#TAB0I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Original title: uninstall the program... Error message says: this patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package__
I'm trying to uninstall Microsoft Silverlight. I used Windows Installer found in the control panel to delete, however, when I try to remove the program I get the error 'this patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.'
The program itself shows is no longer in my program list, and when I visit the Silverlight Web site may not detect an existing version on my system. But when I try to download the latest version, that he says could not be installed because I need to remove the previous version first... I'm going in circles and get no where... I downloaded Revo Uninstaller Pro but it also had no effect... I'm stuck!
Hello
The issue of Windows 7 you have posted is better suited for the public on the Silverlight Forum. Please ask your question in the forum Silverlight Installation and configuration.
http://forums.Silverlight.NET/forums/13.aspx
Kind regards
Gaurav Prakash - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think. -
Empty the Pavilion dv4 screen. CAP and lock number will Flash 3 times
I have a pavilion with a white screen dv4. The cap and number lock led's will blink 3 times. I tried to remove the memory and restart with a single in a slot, then in another location, and then Exchange and repeating. Still no change. I removed the battery and power supply and power button that stood for a minute, and then tried to restart and still no change. Any other ideas? Or is she dead?
with these symptoms, I guess it's a problem more serious. For troubleshooting, please contact any nearest repair center.
-
I've recently updated for windows vista and 7. I had the same problem with the two operating systems. Whenever I try to install some programs, I get a message that says...
"This installation package could not be opened. "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package.I tried to manually update the windows installer, but I can't seem to find a way to fix this one. Currently im running windows 7 64 bit if that helps.
Thank you
' StryffeFor anyone who has problems with this. First ive tried not your guy fixing it was confusing and a lil difficult to follow. I have windows vista 64-bit. and Ive tried all kinds of solutions. Ive found that that some of you will like and other custom. OK, here it is:
You must create a new user! You can download almost anything and it will be displayed on your previous user name! its as simple as that!Here's a video showing you how if you do not know: http://www.youtube.com/watch?v=s09COXeVRGo -
I can't download itunes on my computer its gives me an error saying "this installation package cannot be opened. "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package" can anyone help
Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.Apple.com/kb/HT1923Uninstall software, remove programs and solve uninstalling problems
http://www.revouninstaller.com/Remove and reinstall iTunes, QuickTime, and other software components for Windows XP
http://support.Apple.com/kb/ht1925Hello questions, see if that helps: http://www.raymond.cc/blog/archives/2008/02/10/how-to-uninstall-or-remove-bonjour-mdnsresponderexe/
Problem installing iTunes or QuickTime for Windows
http://support.Apple.com/kb/HT1926Turn on Windows 7 'Compatibility Mode' to iTunes:
http://www.PCWorld.com/article/188534/turn_off_windows_7_compatibility_mode_for_itunes.htmlWindows reports that iTunesSetup.exe is not a valid Win32 program
http://support.Apple.com/kb/TS1406First of all check if you have a version of 32 or 64-bit Windows:
1) click the Start button, right-click computer and then click Properties.
(2) in the system, see the system type - it will say either 32 or 64 bits.
(3) download the appropriate version using the links.ITunes download (32-bit):
http://www.Apple.com/iTunes/download/Download 64 - bit:
http://support.Apple.com/kb/DL1037Make sure that the "Windows Installer" service is running, or force start to begin.
(1) open run, and type services.msc, and then press ENTER. You can also go
Control Panel/Admin Tools/Services.(2) locate the Windows Installer in the list of installed services.
(3) check that the status is "started".
If the condition column is empty, right-click Windows Installer, and then select start.(4) If you get the error trying to force start the Windows Installer service,
and then change the Startup Type to automatic (the default value is 'Manual').
and then restart the computer.(5) very Installation Service runs after you restart the system.
Also:
Forum of Apple's Itunes: you can find a solution (if none of the above is of no help) to your problem when you post on their forum.http://discussions.Apple.com/category.jspa?categoryID=150
J W Stuart: http://www.pagestart.com
-
Windows 7 error message when install Java or Itunes 'this facility not could be opened. "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package.
I have a new machine and some programs I download it stops me in my tracks. It only allows me to install updates of Java or I Tunes?HelpRather than run the program from its current location, make sure that first save you it to your hard drive and then run Setup from there.
-
OPS Java Package Conventions and best practices
What is the naming convention and packages for creating entity, Module of Application, View object, LOV etc. ?
It has been noticed that some packages and Java classes are created in packages such as xxcat.oracle.apps.fnd.server, xxcat.oracle.apps.fnd.lov,
xxcat. Oracle.apps.FND.WebUI etc.
Would like to have a preview or documentation refers to this.
Concerning
Hello
Lines copied to the OFA Dev Guide.
Note: For customers, see extension OA Framework Applications for recommended package structure and the naming conventions for custom logic. Package names are used to group the individual XML UI files and Java classes/interfaces. The company standard Oracle on package names requires that they begin with a lowercase letter and use initial letters instead of underscore characters for each the following words in the name (for example: oracle.apps.fnd.wf.statusMonitor). At the highest level, all of the Oracle E-Business Suite code goes in the oracle.apps package. You may create your code under the following limited packages: y oracle.apps.fnd.framework y oracle.jrad y oracle.mds y oracle.jbo y oracle.cabo y oracle.jdbc see the package / tree Source section below for instructions of additional package definition control. CAUTION: Do not confuse the Java package (tree) with the Package of components of OA, a special XML that can contain several, related OA components. Naming standards for OA components Package names are provided below.
Please see guide dev OAF.
OA Framework standard files (naming, package Structure and content Standard)
See also.
OAF in SSPatil: Naming Convention in OFA
https://imdjkoch.WordPress.com/2013/06/19/naming-standards-of-commonly-used-OAF-components/
Integration of Applications with the Oracle Applications (Doc ID 176852.1)
BR, FLS
-
On a University package prepaid and they ask me to buy illustrator.
On a University package prepaid and they ask me to buy illustrator
How just install illustrator again as if I had before it crashed? I wouldn't buy because the University has already paid for it.
Back to the https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html of the trial
- and Troubleshooting FAQ https://forums.adobe.com/thread/1962238
- and https://helpx.adobe.com/creative-cloud/kb/cloud-website-shows-trial-purchase.html
Your subscription to cloud shows correctly on your account page?
https://www.adobe.com/account.html for subscriptions on your page from Adobe
If you have more than one email, you will be sure that you use the right Adobe ID?
.
If Yes
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
.
If no
This is an open forum, Adobe support... you need Adobe personnel to help
Adobe contact information - http://helpx.adobe.com/contact.html
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
-Select your product and what you need help with
-Click on the blue box "still need help? Contact us. "
Maybe you are looking for
-
Hello friends. I'm at the stage of Firefox OS boot. I need to download the source code of Firefox OS but I couldn't download.Ubuntu have no internet on my computer. I download Windows, then I transfer it to Ubuntu.How can I download Firefox OS source
-
I've been backing up my computer with Windows 7 Home Premium on an external hard drive. I've been using manual backup when I plug the external hard drive. I tried looking for the folder of Firefox but can't seem to find it. He recorded with all of th
-
While browsing the site approached a pop and watch, it of a virus threat and requires me to send an email.
-
Constant voltage using myDAQ output
Im a student and I'm using myDAQ for my final project, I have buil year VI and I want to add a constant output of 3, 3V, during the course of the VI. searched the forum, impossible to find something with myDAQ. Here's my VI:
-
Cannot install Microsoft Security Essentials
get error 0 x 80070643 when you try to install MS Security Essentials.Ive tried to delete all other antivirus and spyware software first but not luck. Help!