Fireworks popup in IE 7

Similar Questions

• Stange button problems when exporting from Fireworks

  First of all thanks for the help of others on button issues I've had.
  
  I created a button with popup menu of fireworks, I saw the button and preview in fireworks gives an overview of the pop-up menu in the excatly the correct position, however when I insert the Fireworks HTML code in a Table in Dreamweaver and previsualisez in IE the table jumps to the top of the button, I tried to move the start position in Fireworks then export again, but the problem is still there. Under the button in the table after insert Dreamweaver adds what looks like a Golden Shield opportunity / anchor with my pop-up Description of the menu, I guess it's the pop-up of the menu Description, this is what causes the problem. ?.
  
  I enclose the HTML for the experts that I know are hiding on this forum.
  
  Becomes very frustarted now. !. I'm so close to make the Pop up menu bar done and people here said it does not work, once this fix is over I'm ready.
  
  Hope someone can help me.
  
  SPECTRA

  First of all thanks for the help of others on button issues I've had.

  I created a button with popup menu of fireworks, I saw the button and preview in fireworks gives an overview of the pop-up menu in the excatly the correct position, however when I insert the Fireworks HTML code in a Table in Dreamweaver and previsualisez in IE the table jumps to the top of the button, I tried to move the start position in Fireworks then export again, but the problem is still there. Under the button in the table after insert Dreamweaver adds what looks like a Golden Shield opportunity / anchor with my pop-up Description of the menu, I guess it's the pop-up of the menu Description, this is what causes the problem. ?.

  I enclose the HTML for the experts that I know are hiding on this forum.

  Becomes very frustarted now. !. I'm so close to make the Pop up menu bar done and people here said it does not work, once this fix is over I'm ready.

  Hope someone can help me.

  SPECTRA

• SWF file overlaps the Fireworks navigation bar in DW 8

  Visit my Web site at http://kanreikai.com/ after that that it has loaded using the menu 'Photos' drop-down and see how the navigation bar is in fact behind the Flash swf file.
  The navigation bar is at the front most layer in dreamweaver 8, and this problem occurred when I added the .swf instead of a picture file. (there is no problem if I simply a .jpg file there instead of the SWF file, in which case the Fireworks navigation bar works very well.)
  
  Is there a problem of layer or does Flash file that overwrites the file Fireworks in DW 8?
  Need your help.
  Thank you
  
  

  Not sure that the popup is blocked, but you can now (see wmode
  parameter):

  http://KB.Adobe.com/selfservice/viewContent.do?externalId=tn_14201&sliceId=2

  --
  JO

  "IdioC" wrote in message
  News:frgv4k$8UB$1@forums. Macromedia.com...
  > Please go to my website at http://kanreikai.com/ after it has
  > load
  > Use the drop 'Photos' and see how the navigation bar is actually behind
  > the
  > Swf flash file.
  > Navigation bar is in the further layer in dreamweaver 8 and this problem
  > only
  > occurred when I added the .swf instead of a picture file. (there is no
  > problem if
  > I just a .jpg file it instead the SWF file, in which case the
  > Fireworks navigation bar works very well.
  >
  > Is there a layer problem or is it a Flash file that overwrites the Fireworks
  > file in DW 8?
  > Need your help.
  > Thank you
  >
  >
  >

• Update Menus in Fireworks

  I created a menu with Fireworks to be used on several pages of a site in Dreamweaver. Is there a way I can add/remove the links in my menu without having to re - import my Fireworks HTML code in each page, whenever I make a change?
  
  I tried to add a link to my menu the changes in my FIreworks PNG and then re-export of all files, but the link does not work properly. I have delete and re - insert my Fireworks HTML code for it to work.
  
  Any help is appreciated.

  Whether you use windows popup or Spry, make a Dreamweaver template and your off page Basic. Then, when you need to make a change, change the template file and all of your Web pages will be updated accordingly.

  It's one thing to Dreamweaver, not Fireworks.

• Maintaining exaggerate in the context Menu generated Fireworks 8

  Hi all
  
  Some of you may be aware of small JavaScript changes you can make to the Fireworks generated code when creating a context menu that allows the active to keep frame image overstate by positioning the mouse on a pop up element.
  
  I used this code successfully with menu items which all the gererate a context menu. However, when you change the code (basically, cutting function MM_swapImageRestore(); from the html page and place it in the js file) when I have one or more menu item which don't spawn pop up menu sub menu spawning non-pop-up element upsets the behavior of code.
  
  On positioning the mouse a menu item contextual spawning directly on an item of menu spawning non-pop-up the item popup spawning retains its exaggerate fram image and does not perform the swapImageRestore(); function.
  
  Does anyone know of JavaScript code adjustments that are necessary to allow the mixing of pop up and non-pop-up spawn menu items that allow the raster image exaggerate to be retained by positioning the mouse on a menu laid?
  
  Thank you for your comments and suggestions.
  
  PS I don't have other suggestions of context menu that I focus on solving this specific problem with this post.
  
  Thank you.
  
  Nick Barling
  barkingweb.com

  Talking to myself again. After a week of silence definition I guess nobody knows the solution to this problem? Well, I solved the problem with a bit of manipulation of code and the menus work fine now.

• Flash Player ' scam? Popup of Angelfire server on Mac

  Unlike surf some websites hosted on the server 'Angelfire', someone has the last numbers to get annoyed at popup windows.  Every time when I visit a several sites hosted on Angelfire Server (http://www.angelfire.lycos.com), I keep getting too bored popups asking me to install the latest Flash Player (see screenshot below).

  

  Anyone of you can try to visit a couple of the sites hosted on Angelfire server example and see if you get similar popups like this snapshot above?

  http://www.angelfire.com/MT/FlyTech/area51.html

  http://www.angelfire.com/TV/squad51/fanfics2.html

  Please let me know.  I think that this popup annoyed in the snapshot could be a scam, so that's why I keep the closing down and do want to install in my Macbook Pro.  Take a look at my latest version of Adobe Flash Player.

  

  All the tips are greatly appreciated.  Thank you.

  If popups are a scam or not, having a version update of Flash of common sense. He represented s = allowing you to run animations and online videos.

  You can update Flash on the official website: adobe.com/products/flashplayer

• BLOCK the POPUP is supposed to stop some analyses online.  How to kill my popup block?

  BLOCK the POPUP is supposed to stop some analyses online.  How to kill my popup block?

  < email published by host >

  Safari > Preferences > Security > Web content:

  Uncheck "block pop-up windows".

  

• Window Popup with strange characters when you want to play music from the cloud

  When I try to play music on the cloud (music downloaded on my computer), I get a popup with some strange characters. It was working fine 2 days ago. Nothing has changed on my computer. I tried uninstalling iTunes and reinstalling. Shows the problem. Any help would be appreciated.

  This is what looks like the pop-up window.

  

  PS - all anti-virus software are up and running.

  As an addendum, I tried to download music (by clicking on the cloud icon, which then shows an arrow pointing downwards). This popup has shown once again.

  Then I thought maybe it was having a problem with my account or my computer don't think she was allowed. So I checked my account login, and I was connected. Then I tried allowing my computer and this popup appeared again. I then tried my scroll wheel and it seems that it is a right screen. I guess that is the lower right button 'accept' but I'm not confident in the present.

  Strange things brewing.

• The effects of a message as lazers and Fireworks do not work

  I've updated my phone to iOS 10 but the laser and lights Fireworks and what not effects do not work. Instead, the message shows and in parentheses, it is said (sent with lasers)

  Greetings aknopp21,

  Thank you for using communities of Apple Support.

  I see that upgrade you your iPhone to iOS 10, and laser and impact of fireworks messages do not work. I use these effects a lot on my iPhone when sending messages. So, I understand the importance of them to work on your iPhone.

  Please make sure that you have not reduced motion activated. Use section reduce the screen on your iPhone, iPad or iPod touch resolution, specifically, this section:
  
  

  iOS uses motion effects to create the perception of depth on your home screen and in applications. If you have sensitivity to the effects of movement or movement of screen on your iPhone, iPad or iPod touch, you can use Motion reduce to turn off these effects.

  

  To activate the movement reduce, go to settings > general > accessibility and press the cursor to reduce the Motion.

  When reducing Motion is enabled, certain effects screen change or are disabled on your device, including:

  • Screen transitions and effects using the effect of dissolving instead of zoom or slide effects.
  • Effect of Parallax where your wallpaper, apps and alerts that move or move slightly when you tilt your device are disabled.
  • Animation and effects in some applications are disabled. For example:
    • Animations of weather in the weather app
    • You cannot send or receive effects of bubbles or fullscreen in Messages

  If reduced motion turned on, please turn off and then test to see if you get the same result.

  Have a wonderful day!

• Popup wouldn't let me close.

  I was on a website (may not been the safest) and a popup came. He wouldn't let me go outside by clicking on the red x, but had only two options that says: stay , then leave the page. Leave page button was blue and white stay normal. I clicked on the page of the authorization and the popup went. IM afraid that by clicking on the blue button page let I installed malicious software or provided access to my computer to someone. These are legitamite concerns and if so it would be smart to install something like bit defender?

  You have nothing to fear in what concerns by clicking on this button "exit page".

  OSX has already built systems of protection and trawling through these forums is anti-malware applications additional third cause more problems than they solve. Your best defense is common sense (do not download and install something you do not or that comes from one source other than directly from the website of the developer of the application. Also never trust any Web page that warns you have been infected by a virus or an unsolicited phone call.)

• I have a random popup, saying that the computer is about to go to sleep!

  It is a sign of letting go... I get this popup, even when I don't plan the computer to sleep!

  Thinking that he can replace the corrupted prefs. I tried to program the Mac to sleep at one time. Of course, I got the popup indicator. I cancelled. Returned to Energy Saver prefs., unchecked the hourly option to sleep. But the problem persists. I always get the popup at random times, at least once a day. I noticed this problem after everywhere in the world in India and back.

  Does anyone know where the preferences are stored? Any solution? Someone at - he experienced this?

  Hello marconey,.

  Check your time zone.

• I received a "popup" to update Firefox, it was ligit?

  I received this "popup" who said that I had to click to update Firefox, because "I am at risk." I didn't proceed/click because I thought that the updates are performed automatically. Should I have clicked on this "popup"?

  If you get a pop-up message asking to put plugins or Firefox updated or anti-malware analysis then this message probably is a scam and you should never respond to such reporting to avoid being infected by malware.

  • Don't update Firefox via "> about" or by downloading and installing Firefox from Mozilla and server never using a popup or a link on a web page.
  • Plugins should be updated only through the plugin itself, or by visiting the home page of the plugin.

• At random intervals, sometimes twice a day, sometimes twice a week, I get a popup when searching mail saying my certificate is out of date. What is going on?

  I'm currently not a screenshot of the "popup" that says 1) my 'certificate' is obsolete and 2) click on 'ok' to make a permanent exception. There is a warning on the popup that is unusual. It happens both when I check mail or try to send it. BUT it does not happen all the time. I was not able to detect a pattern to his accident. I have multiple accounts on my Thunderbird, with different ISPS and I think that's happening for them all.

  As you can see in your second accessory, the cert for your server POP of Gmail was published by Bitdefender. It is not the original cert of Google.
  Thunderbird does not know about the certificates issued by Bitdefender and therefore give you the warning. It is unfortunate that most people don't seem to have any idea what certificates are all about.
  At the end of the day, this means that BitDefender is intercepting your connection to the Google server. They can see your Google password and your plaintext authentication token. It is not something I want.
  Your options are:

  1. accept that Bitdefender is interceptung your secure connection and install the cert of Bitdefender in Thunderbird as a certification authority
  2. ban of Bitdefender to analyze messages inbound and outbound on SSL/TLS, secure connections

  For more details contact the Bitdefender support.

• This cable or accessory is not certified popup while not connected iOS 9.3.4

  I've updated to 9.3.4 iOS on my iPhone 6 more this morning. Now, this afternoon, I get a popup every few minutes saying "this cable or accessory is not certified and may not work reliably with this iPhone." I'm not connected to a cable or accessory. Support Apple advises to do a hard reset, which I did. After a few minutes I received once again the context menu. Not plugged into anything.

  Never received that message before today. The only thing I know that has changed is the software update 9.3.4 (G 13, 35).

  Similar experiences please mark as I have this issue too. I saw another post here, a user with an iPhone 5 with this exactly the same problem.

  Kind regards

  Charles Cavanaugh

  Hi ccphd,

  I understand that you get an error that the accessory is not certified, despite not having anything that is connected to your iPhone. I know it's important to have your device works reliably, so I am pleased to provide you with tips to help with this.

  Learn the steps of troubleshooting we have for this message here:

  If your iPhone, iPad or iPod touch won't charge - Apple Support

  If an alert says that your accessory is not taken care of or certified

  These alerts can appear for several reasons: your iOS device could have a port of loading dirty or damaged, your loading accessory is defective, damaged or not certified by Apple or your USB charger is not designed to load devices.

  1. Remove all debris from the charge on the bottom of your appliance socket.
  2. Restart your iOS device.
  3. Try another USB cable or charger.
  4. Make sure you have the latest version of iOS.
  5. Contact Apple to set up the servicesupport.

  Thank you for using communities of Apple Support, cheers!

• Is my site Popup does not work on the Android browser

  I am the owner of a website IE http://www.stdtestingorlando.net . The Web site is using a responsive model. I just installed a popup javascript based on my site. I just noticed that it is works well on desktop computers, but does not appear on the android devices. What could be the problem?

  Mobile browsers have usually a single window, so the idea of a second window to appear has really no sense, or it will end up as another tab.