Firmware 1.4.0.88 for SG300-52 seems to break DHCP relay

Similar Questions

• SG300 insert option82 in DHCP relay

  Hey guys, anyone having trouble getting a SG300 series pass to insert information from option82? I have Working DHCP relay between two VLANs successfully, however, I want to identify where the client is connected in order to define their preferences for optimal routing.

  switch-20-0#show ip dhcp relay
  DHCP relay is Enabled
  Option 82 is Enabled
  Maximum number of supported VLANs without IP Address is 256
  Number of DHCP Relays enabled on VLANs without IP Address is 1
  DHCP relay is not configured on any port.
  DHCP relay is enabled on Vlans: 20
  Active: 20
  Inactive:
  Servers: 192.168.0.2
  

  I have to you missing something simple. Any help, or even "Hey have you tried' type answers very much appreciated!

  Hi Jonathan,.

  To my knowledge, you have everything configured properly. I would try to set up packet capture on the switch to the position to interface to the DHCP server to see if the information is included in the DHCP Discover message.

  -Good Trent

  * Please note the useful messages! **

• I get the same updates for windows, it seems to download and install properly but then next day return.

  I get the same updates for windows, it seems to download and install properly but then next day return.

  Hi Graxx101,

  ·         Did you do changes on the computer before the show?

  ·         The updates are installed successfully?

  Follow the steps in the article.

  Windows Update or Microsoft Update repeatedly offers the same update

• How can I make my bigger office that everything what I serch for on internet seems very small

  How to do greater than all things what I serch for on internet seems very small

  How to do greater than all things what I serch for on internet seems very small

  While in the internet web page > look to the bottom right > click the " %" symbol > increase the number of % for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The SG300 can act as a DHCP server in L2 mode?

  Hello

  The SG300 can act as a DHCP server in L2 mode? I guess not, but the GUI allows the DHCP server to activate in L2 mode, so I wonder if thre is a way to do this.

  Thank you

  Bob

  Hi Robert, unfortunately he can't.

  -Tom
  Please mark replied messages useful
  http://blogs.Cisco.com/smallbusiness/

• DHCP relay for users (ASA) SSL VPN

  I have ASA 5520 vpn endpoint. Before asa, there are firewalls which translates the public ip address to the private sector and to pass SSL traffic to ASA. I have configured DHCP relay to get the IP address for the DHCP in Windows Server users:

  dhcprelay Server 10.100.2.101 on the inside

  dhcprelay activate vpn

  dhcprelay setroute vpn

  and it does not work. with the local pool, it works fine. Should I do something else? When I turn on debugging it has not any activity.

  You try to assign the IP address to the SSL vpn client using the DHCP server?

  If so, you don't need these commands contained in your message.

  Basically, you need to set dhcp server in tunnel-group and dhcp-network-scope in group policy.

  Here is an example of Ipsec client. Setup must be the same.

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a0080a66bc6.shtml

• Download links for standalone AWM seem to be broken. What can I do?

  Download for AWM links seem to be broken. Apparently, they point to the download page for the database server:
  
  [AWM download page | http://www.oracle.com/technetwork/database/enterprise-edition/downloads/olap-downloads-098860.html]
  
  Where can else I find this software?
  
  Concerning
  
  Juan Algaba Colera

  Hi there, some of the OTN links are broken due to migration. Here is the link-

  http://www.Oracle.com/technology/software/htdocs/devlic.html?URL=http://download.Oracle.com/OTN/Java/OLAP/awm112010_standalone.zip

  Thank you, Laura

• Firmware revision 7.6.7 for Airport Express base station has been officially launched?

  Apple has released version 7.6.7 FIRMWARE for the Apple Airport base station.

  My Airport Extreme works 7.7.7 firmware version.

• OfficeJet 6500 E710a-f: how to download the latest firmware and the BASE driver for my Officejet 6500 on Windows 7

  I'm looking for a way to download the latest driver and firmware base packages for my Officejet 6500 E710a-f for Windows 7, x 64 (latest patches and service packs applied).

  Regardless of the road I take (including the link called "Download drivers"), finding drivers inevitably leads me to the same page that contains the vertical tabs named 'Troubleshooting', 'How to' and so on and none of the links - not even under 'options to support more' - led to a Basic downloadable driver package. In fact, none of them leads to a downloadable driver package of all kinds. The most that I could find is that package Wizard driver installation that attempts to download the package that I am not interested in-oh and a few mentions in the KB articles downloadable driver packages.

  I also tried "Printer Setup, Installation" & Setup and then variously "Installation, install & connect printer ' and 'Software updates' & Firmware, which none offer a downloadable package.

  This used to work perfectly fine a few months ago, but now I'm getting round on the same page over and over again. I can not find the basic driver or the software for the printer more.

  Where can I find the basic driver package (used about 30 MB in size) in order to avoid the crapware included in the package (130MO) "full feature" more great who gets automatically downloaded to an unknown destination on my hard drive using this driver installation wizard. It's my PC and I want to be the one who decides in which runs when and how. Now I can try to track down the location of download using ProcMon and what not, but it would give me is this package 'feature complete' with a bunch of crapware added on strictly necessary. How to get the base driver package?

  Thank you!

  Never mind. Fascinating, the "Download drivers" link under the Support tab at the top leads to a different page that the link "search for drivers' next to my question posted .

  Both methods require enter the name of the model (after picking "Printers" in the first case) in a similar way, but the former led in circles on the same page with no possibility to download, while the latter one immediately takes me to the downloads, I was looking for.

• Is there a way to download the firmware from a GUI Labview for an Actel FPGA or an ARM processor?

  I don't know if it's possible, but I have a couple of test that must be accomplished where several firmware is requested to be downloaded on the pcb. So, whenever I need to open Flash Pro (microsemi) and download the firmware for the Actel FPGA and then come back to labview. I wonder if there is a way to do it since my labview Vi so firmware will download automatically?

  Thank you

  You should be able to make TCL scripts inside your Flash Pro software.  They have a macro generator which will just imitate what you do.  Save this TCL file.  You can then load Flash Pro via the Exec System with a parameter pointing to this script file.  Flash Pro will then run this script and close once.

  

• Upgraded image of boot for SG300 - 28 p

  Hello

  I have a SG300 - 28 p and I need to upgrade the versions so the boot & firrmware.

  The problem is I can not find the file to start anywhere, the only file that is available on the download page of Cisco is the file of the firmware (".ros")

  These are my current versions:

  Show worm

  SW version 1.3.5.58 (date October 10, 2013 time 17:15:41)

  Start the version 1.0.0.4 (April 8, 2010 time 16:37:57)

  HW version V01

  And I get this warning on startup...

  ***********************************************************

  ***********************************************************

  * Boot version is incompatible with the image of the system.   **

  * Some new features have been disabled.                 **

  * Please update more recent version of boot.                 **

  ***********************************************************

  ***********************************************************

  Hence the need to upgrade.

  Ian was soon

  Ian heath,

  When you download:

  Sx300 Firmware Version 1.3.5.58

  Sx300_FW_Boot_1.3.5.58.zip

  The ha zip file a copy of the firmware and also a copy of the startup code. The startup code must be upgraded via a tftp server. After that the startup code is updated, download and install the latest firmware version 1.3.7.18. (No bootcode with this one)

  -Marty

• 6.2.5 ReadyNAS 104 firmware update is not displayed for ethernet network adapters > links

  I recently updated my ReadyNAS to 6.2.5 firmware 1.04 and the network > links page does not appear any ethernet cards. I recycled the box several times but still no information of the card. Because I can navigate to the page to admin (via IP address), the network works. However, it does not appear in the DNS so I would check the configuration but impossible because no card shows eth. Any ideas on how to solve this problem?

  I finally solve this by manually installing the 6.2.5 new update. Seemed to have solved any problem occurred during automatic update.

• 3.18.6 firmware-> set Just to day for her

  I saw that 3.18.6 was available so I've updated to it of 3.18.4.   Not sure if I have quick access given Advisory Group of consumers that have occurred for this device, or if it is accessible to all.

  Anyway can someone Linksys please paste a list of changes?  Looks like the main support NMH410 download site has only the release notes for 3.18.4.

  Thank you

  -Dan

  Dan,

  Here's the first builds. You should not post in the forums about this information. These versions are not passed by all QA, which gives early information for builds is not recommended.

  Tony

• Pavilion 15-P010ax: I have firmware my Pavilion 15-P010ax for win 7, can't find certain drivers

  So I went down to windows 7 because I hated strongly windows 8 and Ive managed to download most of the drivers but I can't find the drivers for Universal Serial Bus (USB) all for this modal laptop...

  where in the world is, ive spent hours of searching it and it does not even exist, someone help me please here! I really need that I can't use my computer without these drivers do not work my usb slots and I really need them now! YES PLEASEEE

  Hello

  Try to download, save and install the AMD chipset:
  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Reboot the system after installation.

  Concerning

  Visruth

• Upgrade firmware form 2.1(1a) for 3.1 (1e)

  Hello

  I have a UCS version 2.1(1a)-based system and I need to upgrade to 3.1 (1e).

  I couldn't find any document related to the improvement of this version 3. XX

  can be done directly or do I have to go to intermediate version such as 2.2 (5), or then?

  Thanks in advance.

  I guess that your infrastructure of UCS is currently / 2.1?

  Upgrade from 2.1 to 3.1.1 would need a two-step upgrade 2.1-> 2.2 and 2.2-> 3.1.1e

  The steps are so

  (1) move the UCS infra to 2.2.x version

  (2) blades upgrade to version 2.2.x

  Procedure:

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/SW/upgrading/From2-0/TO2-2/b_UpgradingCiscoUCSFrom2-0To2-2.html

  (3) improve the UCS infra to 3.1.1e

  (4) move the blades to 3.1.1e or an adapted version

  Procedure:

  http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Firmware-Mgmt/3-1/b_UCSM_GUI_Firmware_Management_Guide_3_1/b_UCSM_GUI_Firmware_Management_Guide_3_1_chapter_01.html#concept_F4E8EB876BC949E2855327611B88B866

  As stated in the link

  "Before moving to Cisco UCS Manager version 3.1, make sure that the existing infrastructure and the server bundles is on a Cisco UCS Manager 2.2 (x) version, or later versions. .

  Important:

  The upgrade of the infrastructure beams earlier than Cisco UCS Manager version 2.2(1a) is not supported. »

  Hope that help, please indicate any solution that fix that will help the other fine a solution more quickly.

  Qiese Sa'di