First 2015.4 is not using CUDA when H.264 rendering

Similar Questions

• My nail of the thumb in bridge always have evidence the adjustments I make to RAW files. Now, for the first time they have not. However when I select the images adjusted and open them in CS6 adjustments are there. I restarted the bridge and PS, and I rest

  My nail of the thumb in bridge always have evidence the adjustments I make to RAW files. Now, for the first time they have not. However when I select the images adjusted and open them in CS6 adjustments are there. I restarted bridge and PS, and I restarted the computer (Mac). Still the same problem.

  I thank assani, but it wasn't the answer. The problem was, I finally understood, that the "option for generation of quality and preview thumbnails" wasn't on "high quality" as it usually is. I have no idea how this happened as I never change this option.

  Thanks a lot for your help.

  Mitchel Gray

• 35.0 Firefox is report the SSLV3 security on site errors not using SSLV3 when you will fix it

  I was in the middle of a transaction on chaseonline when firefox me hunting and showed a page about the SSLV3 security issues. When I started this morning the version of firefox has been 34.0.5 after what is is that the version of firefox was 35.0. I did the test of SSL site and that the site does not use the Protocol SSLv3, see the link below:

  https://www.ssllabs.com/ssltest/analyze.html?d=chaseonline.Chase.com

  I've been using version 34 and more for some time and did not have problems accessing chaseonline website, until the 35 version has been installed.

  I haven't restarted the browser since it happened, but my guess is that the problem will continue. When this will look?

  Thanks for the quick response.

  The site wasn't trying to redirect, I was typing in e-mail secure at the time.

  I tried several times to reconnect to my account and only got the page generic message about firefox is not able to access the site due to problems with SSLv3 safely. During this time I never exceeded this point trying to connect to the site.

  Meanwhile, I realize now that the browser was stuck between versions (34.0.5 and 35). Although I still don't know why 34.0.5 through this error when I used it for a long time I was able to resolve the problem by closing and restarting my browser.

  In other words, I am now able to access the site of hunting without errors.

  That is why I am rarely, if ever, to host software auto-magiquement update in the background. I'll be this switch off voltage and installation of the updates manually.

  Thanks for you comments and feedback!

  His

• HP m1536dnf: m1536dnf-HP will not use ADF when scanning

  Recently, I have re-installed this printer to a new computer. It took a week to finally get the scan works works again, but now it won't use the ADF when scanning - but it can still scan using the background window. The charger works fine when copying, and it acknowledges the documents when it is in the charger.

  Thanks for the reply. I solved the problem by downloading the windows marketplace of HP scanning app.

• Why can I not use Photoshop when I transfer data to new computer

  I transferred my backup files to my new Mac, but when I go to use the CS6 version I've used for years, it asks me to sign using a trial of Adobe photoshop. What can I do?

  Found this... 150:30 trouble https://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html license error

• LocationListener does not receive updates when BrowserField 2 renders in 6.0

  I have an application that calls a mobile web site using BrowserField 2.  The application needs make the current GPS position to the mobile website with each request to the site.

  I used code MultipleFixDemo to get a LocationListener job.  Everything worked very well in the Simulator and all manual updates of location were received by the LocationListener in the application.

  I changed the display to include a component BrowserField 2 and the LocationListener does not update the location of the Simulator.

  Y at - it something I need to do something different when the user interface includes the BrowserField.  Can I have some kind of thread problem?  I only tested on OS 6.0 in the Simulator.  I don't have access to a real device.

  In the code below, I have two defined screens.

  If the pushScreen (new MultipleFixScreen() is uncommented and the pushScreen (new BrowserFieldScreen() is commented out, the LocationListener receives updates.)

  If the pushScreen (newMultpleFixScreen () is commented out and the pushScreen (new BrowserFieldScreen() is uncommented, the LocationListener gets no updates.)

  Here is my code:

  public class MultipleFixDemo extends UiApplication
  {
      private double longitude;
      private double latitude;
      BlackBerryLocationProvider myProvider;
  
      public static void main(String[] args)
      {
          new MultipleFixDemo().enterEventDispatcher();
      }
  
      public MultipleFixDemo()
      {
          startLocationUpdate();
  
          pushScreen(new BrowserFieldScreen());
          //pushScreen(new MultipleFixScreen());
      }
  
     private void startLocationUpdate()
      {
          try
          {
              BlackBerryCriteria myCriteria = new BlackBerryCriteria();
              myCriteria.enableGeolocationWithGPS(BlackBerryCriteria.FASTEST_FIX_PREFERRED);
              try
              {
                  myProvider = (BlackBerryLocationProvider)LocationProvider.getInstance(myCriteria);
  
                  if ( myProvider == null )
                  {
                      Runnable showUnsupportedDialog = new Runnable()
                      {
                          public void run() {
                              Dialog.alert("Location service unsupported, exiting...");
                              System.exit( 1 );
                          }
                      };
                      invokeLater( showUnsupportedDialog );
                  }
                  else
                  {
                      myProvider.setLocationListener(new LocationListenerImpl(), 2, -1, -1);
  
                  }
              }
              catch (LocationException le)
              {
                  System.err.println("Failed to retrieve a location provider");
                  System.err.println(le);
                  System.exit(0);
              }
          }
          catch (UnsupportedOperationException ue)
          {
              System.err.println("Require mode is unavailable");
              System.err.println(ue);
              System.exit(0);
          }
          return;
      }
  
      private class LocationListenerImpl implements LocationListener
      {
          public void locationUpdated(LocationProvider provider, Location location)
          {
              System.out.println("update location called");
              if(location.isValid())
              {
                  longitude = location.getQualifiedCoordinates().getLongitude();
                  latitude = location.getQualifiedCoordinates().getLatitude();
                  float altitude = location.getQualifiedCoordinates().getAltitude();
  
                  StringBuffer sb = new StringBuffer();
                  sb.append("Longitude: ");
                  sb.append(longitude);
                  sb.append("\n");
                  sb.append("Latitude: ");
                  sb.append(latitude);
                  sb.append("\n");
                  sb.append("Altitude: ");
                  sb.append(altitude);
                  sb.append(" m");
                  System.out.println("!!!!!!!Location update: " + sb.toString());
                  //MultipleFixDemo.this.updateLocationScreen(sb.toString());
              }
          }
  
          public void providerStateChanged(LocationProvider provider, int newState)
          {
              System.out.println("providerStateChanged called");
              // Not implemented
          }
      }
  
      class BrowserFieldScreen extends MainScreen
      {
          private BrowserField _browserField;
          private boolean _documentLoaded = false;
          private BrowserFieldRequest _request;
  
          /**
           * Creates a new BrowserFieldScreen object
           * @param request The URI of the content to display in this BrowserFieldScreen
           * @param enableScriptMenu True if a context menu is to be created for this BrowserFieldScreen instance, false otherwise
           */
          public BrowserFieldScreen()
          {
              super(Screen.HORIZONTAL_SCROLL | DEFAULT_CLOSE | DEFAULT_MENU);
              BrowserFieldRequest request = new BrowserFieldRequest("http://www.google.com");
  
              BrowserFieldConfig config = new BrowserFieldConfig();
              _browserField = new BrowserField(config);
              _browserField.addListener(new DemoBrowserListener());
              add(_browserField);
              _request = request;
          }    
  
          /**
           * @see Screen#onUiEngineAttached(boolean)
           */
          protected void onUiEngineAttached(boolean attached)
          {
              if(attached)
              {
                  try
                  {
                      _browserField.requestContent(_request);
                  }
                  catch(Exception e)
                  {
                      deleteAll();
                      add(new LabelField("ERROR:\n\n"));
                      add(new LabelField(e.getMessage()));
                  }
              }
          }
  
          /**
           * Returns this screen's BrowserField object
           * @return This screen's BrowserField object
           */
          public BrowserField getBrowserField()
          {
              return _browserField;
          }
  
          /**
           * A class to listen for BrowserField events
           */
          private class DemoBrowserListener extends BrowserFieldListener
          {
              /**
               * @see BrowserFieldListener#documentCreated(BrowserField, ScriptEngine, Document)
               */
              public void documentLoaded(BrowserField browserField, Document document)
              {
                  _documentLoaded = true;
              }
          }
      }
      private final static class MultipleFixScreen extends MainScreen
      {
          MultipleFixScreen()
          {
              super(DEFAULT_CLOSE | DEFAULT_MENU);
  
              RichTextField instructions = new RichTextField("Waiting for location update...",Field.NON_FOCUSABLE);
              this.add(instructions);
          }
      }
  }
  

  Any suggestions would be greatly appreciated.

  Thank you

  Jackie

  This is a limitation of the BrowserField.  The BrowserField also recorded a LocationListener that is use to power the GPS updates via JavaScript to pages it restores.  This LocationListener / that your application has already registered (given that the application can only record 1).

  There are two ways you can work around this problem.  You can save your LocationListener again after posting the BrowserField.  Note that if you take this approach methods JavaScript GPS won't within your BrowserField.

  The second approach is to poll for updates location, instead of using a LocationListener.  It should continue to work after posting a BrowserField.

• Not first 2015.3 no audio in MOV files

  I have an existing project from 2015 first with MOV files in it. Everything was good in the world until that blasted creative cloud persistently told me to go to 2015.3 so I held. After the upgrade to the first 2015.3 decided not to move the audio in MOV files. I installed Quicktime. And as said before everything worked fine in the previous version of first. I tried to use Media encoder to change the type of file, but it doesn't recognize too much audio in MOV files. What gives Adobe?

  Hi bubbachubby,

  Rampage files cache media to solve this problem.

  FAQ: How to clean the files hide media

  Thank you

  Regalo

• Updated for first 2015.3 CC and now Audio dropped from stuttering frame-type questions...

  I've just updated for first CC 2015.3 on my system running on Windows 7, 32 GB of RAM, quad-xeons double...

  Seemed like a good idea...  Now, the sound stutters and drop frames.

  I have a multi-boot system, so I just loaded Adobe CC on my boot Windows 10.
  Always first 2015.3 does not play correctly and stutters.
  Has created a new project-sequence and placed an MP3 on the timeline without any video. Looks a sort of boat engine during playback and the visuals on the counters still indicate stuttering as well.

  Anyone else having this problem after the update?
  How can I get my 2015.2 or whatever I had on my system?  There is no menu drop down more on install to install an older version [other sites showed a fall to the bottom of the box where you can install the CC 2014 version but I have yet to see it]

  Major project I want to do and now the first is completely useless after this upgrade.

  If 100% fresh install go on Windows 10 Virgin operating system still has flaws that had my configuration of Windows 7 operating system, I'm not clear how 2015.3 playback can be rectified?

  After some troubleshooting I've narrowed the issue until this CC first 2015.3 don't like my graphics card, a SoundBlaster Z and its parameters.  2015.2 worked fine, but now the sound stutters and playback is extremely agitated turn upgrade.

  For this project, I am just finishing, I'll use, of all things, the HDMI sound goes to my computer screen.  The Nvidia graphics card I do not mind reading.  I'll tinker later and see if I can find a permanent solution...

• Try to return to first 2014, creative cloud not giving this option

  I've just updated first in 2015.3 and now cannot open projects that were created in the 2015 first version.

  I'm working to get back to the original version of 2015 or even better 2014 if possible.

  I know that this can be done through creative cloud manager in my toolbar and simply go down to "Find additional Apps" and click on the "filters & tab Versions" and you should be able to see the previous Version tab where you can download older versions.  However, I am not given this option.  Here is a screenshot of the options it is for me, and how deadly is not an option.

  

  My version of Adobe Creative Cloud is 3.7.5.291

  First 2015.3 is not going to work for me I get the spinning wheel whenever I try to import a project 2015, so thanks in advance for any help you can offer to solve this.

  Neil,

  I'm on a mac and I just figured out what the issue was after getting the cat w Adobe...

  Drum roll...

  I forgot I have two accounts adobe and was signed in the wrong...  As soon as I myself am registered on my CC account paying I had the option of previous versions...

  Sorry to be a model but thanks for the carillon.

  I'm back to CC2015.2 and open my project yet.  I still have a question of Central ramp in 2015 but I'm just happy to be again to change.  I can try to go until 2014 by an xml export but it's a whole different deal.

  Thanks for the ringtone to Neil, sorry for jumping the gun on this!

  -sh

• When I'm not going to update 6.0 to 6.4, it become a CC version 2015.4! I used to stay in 6.4 and no. CC version! Do you have a specific process for this?

  When I'm not going to update 6.0 to 6.4, it become a CC version 2015.4! I used to stay in 6.4 and no. CC version! Do you have a specific process for this?

  See if this link helps:

  https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• Why the first Firefox page tell me that I do not use the latest version when the "about" in the menu help says I?

  I updated Firefox 2 days after seeing the message that I was not using the latest version. Download and install led and everything seems to work normally except that I still have a message on my Firefox home page telling me that I'm not using the latest version. If, on the other hand, I navigate to 'Firefox' - 'help' - "On Firefox" I tells me that I'm running Firefox 8.0.1 and "Firefox is updated.

  You can see this message under the Google search box on www.google.com/firefox which is the old default Firefox homepage. It seems that this page is no longer maintained. You seem to have Firefox installed with the latest version 8.0.1.

  If you want to than the Google search page as homepage, change your homepage to Subject: House (a new update version is now integrated into Firefox).

  • See-> http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  Also see-> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version
  
  You can also see your version on the help > troubleshooting information display

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin

  * Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox

  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• White screen when displaying 3 files & using Cuda

  Hi all

  I am very angry because it seems that first 2015 will not play files r3d (6K) in MODE CUDA. If I turn it on using the SOFTWARE, the image is immediately come back. If I switch back to CUDA, the screen is empty.   Hey Adobe, it's my problem or yours?

  My video card is Nvidia gtx 970 4 GB ram

  Of the system RAM is 32 gigabytes

  Thank you!

  Lou

  OB, you're right.

  But I went forward, not backward

  I read the date of issue on 368.69 and pretty of course, he said "fixed blank screens in the first when using files R3d.".

  So thank YOU JIM and my apologies to adobe.

• Thumbnails that use RAM in the first (2015.3)

  Hi, we had a problem with first (2015.3) using the RAM on PC. Whenever we display media thumbnails, first sucks all the RAM until Windows crashes (we can monitor it via Task Manager). This also happens when you link to the media and it consistent. The only work around we have found is to view the media as a list instead of thumbnails when linking to the media.  I put the max RAM for first allocation in the preferences of the memory, but it seems to make no difference. We run on Windows 10 with 16 GB of RAM installed? It's a strange question that seems to be going through all of our machines (which are still configured). Someone else has this problem? We suspect that this is a bug with the latest version of first? Any help would be appreciated, thanks.

  Please write a bug report on it, listing exactly the question & how it goes and of course that you encounter it on several machines in your office.

  It seems a stupid thing both because they do NOT meet the filing of reports, but... it's the only way to ensure you get the information that you experience a bug and what is the management team. It is in the application forms tabulated bug/feature that they decide to engineer time budgeting and priorities.

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  And Yes, clearly pose with memory leaks in 2015.4 across both Mac and at least Win10 version. I'm on Win7 and with not problems... touch wood... but do not know whether or not it is related to the operating system.

  Neil

• First 2015.4 CC crashing when you choose h.264

  Let me start from the beginning; I had updated my video card had a weird problem with it when the screen remained black, but I finally got things and run again. At edit a project and I noticed that when I imported the video, it came with no sound in the monitor of the timeline and source even if the video has played very well outside the first. Could not understand why, happening so I decided to upgrade from the first, thinking that it might be a bug has been fixed. After the update, I started a new project and one of the imported clips and finally, they played very well. So I opened the previous project, in the immediate future, first 2015.4 and all loading upward, but all the videos of the project were gray in the project window and when you click on will present media in the meantime but there was no consistent going on at all. Since all played very well apart from the videos, I thought it must be a problem because of the upgrade, so I deleted the videos, re-imported and places them how I wanted that they worked. Now when I go to export, when I change my AVI to h.264 format, the program hangs and then crashes. I tried the things:

  1 clean the media cache

  2. change the project settings to use the software only

  3. Uninstall and reinstall first

  4. restoration of the video card driver

  5 reset

  Sill no luck. I checked the event viewer, and it showed that ntdll.dll has been involved in accidents. My PC specs are:

  CPU: i7 3820 (8 cores) running at 3.8 Ghz

  Motherboard: Gigabyte LGA-2011

  Memory: 28GB

  GPU: GigaByte GTX 650 Ti (pilot: 372.54 latest Version)

  PP Version: PP CC 2015.3 (although he said the responsibility of project: 2015.4)

  OS: Windows 10 x 64

  Disk: 1 TB HARD drive

  Would have thought I would collect some support here, don't think. Anyway, I solved my problem. Retired on 2015.3/4 in 2015 again and made a manual of the media folder cache files (which I thought was empty since I clicked on media clean cache from the program, but was not), has also done sfc scan and saw that iccvid.dll has been corrupted, replaced one but also re-download and install a codec pack. So now, at least for this first version it's in the form of work.

• Computer will not use the drive when you restart.

  I have a Pavilion dv 9000 and had problems more and more lately (win explorer fails, application launcher fail, blue screens, crashes etc.).

  I decided to use the recovery disk that was created at first boot. According to all the manuals that I found (on - and offline), it is just to put the recovery disk in the DVD-ROM and restart.

  The problem is that nothing happens. The computer does not use the disk when it reboots.

  Anyone experienced the same problem with the recovery disk?

  I'm not having any other problems with the ROM, works perfektly once Windows is running.

  Thank you

  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.