First categories show only 24 apps?

Similar Questions

• I have files mp4 with 4 audio channels, but when I import it into the first it shows only a single channel

  I have the mp4 with 4 channel audio file that is not in the audio channel. When I import in the first it shows only 1 channel. In the project window, I try to find other audio channels on option audio channel (Edit-> audio channels) but it shows other channels. How active other audio channels and retrieve audio sound?

  When you go to interpret, I chose multichannel, then specified 4 tracks.

• Apparently I have inadverdently clicked on something that has changed my address book listings to show only the first three letters of each name.

  the column showing my address book now shows only the first three characters of each name
  It's as if they have all been abbreviated

  I try to decipher the names of these three characters before clicking on
  to see the
  address window of the person with all of the information

  I'd like to be able to read the name first & last as before

  Thanks in advance

  Try dragging the column header to create the wider column

• My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  I don't think there is much you can do about it outside the use of workaround to reload the page until this problem is corrected.

  There is this bug on this problem:

  • http://Bugzilla.DownloadHelper.NET:8080 / show_bug.cgi? id = 642

  I don't know if other extensions download suffer from this issue, as well, so you can try a little more try the website of the add-on and if possible use a different format like WebM, if they are available.

  Also note that not all videos are downloaded and registered correctly. Some may have a size of 0 bytes and fail to download, so, best is to check in downloads of the toolbar Manager in the drop-down list to make sure that the file size is correct (i.e. neither 0 bytes, but a more likely size).

  YouTube streaming makes changes to the code and the way its web pages work, so extensions can fail at any time.

• Update Firefox lost it of Wharf logo, shows only the generic Mac App logo

  After update to 17.0 for Mac, I lost my Firefox, the dock shows only the generic Mac App logo.

  Try this:

  • Remove the Firefox icon from the dock.
  • Create a new icon by dragging the Firefox application to the dock.
  • [883573/questions/883573]

• My indicator shows only the first line of the string

  Hi all

  I'm having some trouble with chains, could you help me?

  I use a device connected to my computer in a RS-232 port.

  I configured the VISA series correctly. When I write a command to my device, the answer is something like this:

  "XXXXX."

  YYYYYY

  2222

  44444

  WWWW.

  The problem is when I try to read this response. The channel indicator shows only one line at a time every single loop. And the other orders received are stored in the buffer until their time to be displayed to come. I mean:

  In the first loop device XXXXX responses.

  In the second loop the device responds YYYYYY but now I stored what must appear:

  2222

  44444

  WWWW

  XXXXX

  YYYYYY

  2222

  44444

  WWWW

  In the third loop, the device responds 2222 and stores again:

  44444

  WWWW

  XXXXX

  YYYYYY

  2222

  44444

  WWWW

  XXXXX

  YYYYYY

  2222

  44444

  WWWW

  How can I configure my blocks to display the full string?

  Thank you

  Murilo

  Post your code and we can better understand what is happening.

  My first is however you spend only the corrent, reading of the indicator.

  You use a chain shift reg with a knot to concatenate a String?

  

  Your zip code and we'll have a glance.

• My account calendar shows only not in the calendar app

  Hello

  I have a problem with the calendar (version 18.6.A.0.1). When I open it, the calendar shows only birthdays my contacts, but I don't see my owncloud calendar, even though I can see and synchronize in the android account manager.

  In fact, I disabled the application of storage calendar, then created the resource calendar and finally turn back the calendar again storage application. So storage of schedule was a little lost after him.
  This problem is resolved by the deletion and recreation of the resource.

• activate my membership and paid for it as well, but the creative cloud app shows only the trial versions of the programs? What does that mean? Cause I followed the installation steps, and when I try again it says my installation code has already been

  I activated my subscription and paid for it as well, but the creative application cloud shows only the trial versions of the programs? What does that mean? Cause I followed the installation steps, and when I try again it says my installation code has already been activated?...

  Kindly Contact customer and details of payment verified. [Make sure that you are connected to the Web site with the valid Adobe ID under which the product is licensed].

  
  

  
  

• 'get info' show only 2 GB available; Finder displays 100 GB available. Where is my space?

  'get info' show only 2 GB available; Finder displays 100 GB available. Where is my space?

  http://pondini.org/OSX/LionStorage.html

  You can have a lot of "other".

  What is 'other' storage and what size should it be?

  You can try an app like Disksweeper

  https://www.OmniGroup.com/more

  or

  http://grandperspectiv.sourceforge.NET/

• Omen of HP 15: Wifi stop working. Win10 shows only a single network and it connects to the WiFi

  Hi guys,.
  Since a few days my wifi stopped working.
  If I click the Wifi icon it shows only a SINGLE NETWORK (two maximum), but not mine!

  

  And I live in a building of 20 + networks, as you can see on the WiFi Analyzer (I'm the only red to the right)
  
  
  
  If I reactive / disable Wifi with fn + f12, it goes back in plane and Wifi mode mode and sees it eventually all networks:
  
  
  
  My Wifi is on top. If it is registered, Windows connects to it and then she abandons the connection; If it is not registered, and I try to connect, it says "you are not able to connect to this network.
  Is fun is that after a few seconds, each network disappears and alone is shown (probably the one next door... I don't know).
  
  I already tried to RESET the laptop MATERIAL by keeping the power button for 10-15 seconds with the laptop is turned off.
  I tried to follow these instructions (http://support.hp.com/us-en/document/c04649175) updated drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [10 default Windows], 18.32.0 [last drivers]) without success. Whenever I have install a new driver, I uninstalled the earlier software Wireless + restart.
  
  I tried to uncheked "allow this computer to turn off this device to save power" on my settings of Wifi hardware without success.
  
  HP network support said that I did not choose a Wifi (really? The problem is that I do not see my Wifi on the list!).

  This is unrelated to a new 10 Windows upgrade since I installed it months ago and this is the first time I have this problem :/ It has always worked
  
  I tried different settings too:
  I changed the channel, I put 802.11 g on my router, APSD off on the router.
  I put "Magic off packet, QoS ad hoc off, U-APSD off, fat wide channel, differential flow mode HT off" on the creation of the map without success. Nothing chaned.
  
  The hardware test detects any failure.
  
  Important note: If I close the router, it shows my network connection with full power and he connects to it. Then I come back in my room (probably 3/4 meters away), it MAINTAINS the connection for 30 / 40 min and he drops the connection and I cannot reconnect to it more. It has always worked perfectly in my room during these months (I bought it in March 2015), so the distance is not a problem, I'm 6 / 7 m away from the router.
  In this case, it shows my network (connected) and the nearby... and the other 20 networks +?
  
  The only way I have is USB tethering with my Nexus 5.
  
  Linux: I tried the WiFi on Freya elementary (Ubuntu linux OS base) and it displays 20 + networks available on the list. He has not the connection problem with my Wifi, but sometimes it stops working, Web pages stop loading and I have to restart Wifi to reconnect to the it (usually after 30/40 min of use it).
  
  -------------------------------------------------------------------------------------

  What is the problem? My Wifi card is broken? Should I call Italian support or if you have any suggestions?

  WAWood,
  I took a risk.
  I did a factory restore with recovery HP (I have a drive dedicated for her)... and it worked!
  I had to switch from Win8.1 to 10, but the Wifi problem is solved!
  
  I'm still guessing that was the problem...

  Now, I'm under Intel drivers 18.30.0.9 worm and all the networks work.
  
  In the next few days I'm checking the linux problem (reset deleted primary partition).

• E-mail Exchange shows only 15 messages

  I'm syncing my Exchange corporate e-mail through the default e-mail application. This is the only account that use in the email app. Currently it shows only the 15 most recent messages. How can I show more? Is there a setting somewhere or a button 'next page '?

  It is not a parameter of "15 minutes", but what I can suggest is go into your account:

  Settings-> accounts-> Corporate Sync

  If you scroll down there is a "sync messages to ' section - try to set a higher value (1 week for example) and see what happens...

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• Sidebar calendar shows only orange... not the data either

  My calendar loads in the bar but shows only an orange page.  There is nothing else... no data at all. I tried the tools without result; It only allows me to remove the calendar.

  If it's just the calendar gadget that gives you trouble, you should be able to simply re - record a single. DLL to rectify a calendar gadget that looks like this,

  
  First remove the existing calendar gadget, and then click Start or press on the key and type cmd but don't hit. Search for CMD in the list above and right-click and select run as administrator. Confirm the warning of the DSU and provide credentials if requested.

  The open command window, type.

  Regsvr32.exe vbscript.dll
  ... and click on . You will receive a popup confirmation as follows,

  

  Restart the computer and add the calendar on the desktop gadget. It should now work as follows,

  

  If the gadget still does not work, you can try a much more aggressive approach to my solution on this page.

• Windows resource monitor shows only a CPU core when he should have four.

  Windows 7 Home Premium 64-bit, SP1
  Intel Core i3 2330 m-hyperthreading

  Resource monitor normally indicates two nuclei and Hyperthreaded (a total of four graphs) when seen on the tab CPU recently single core (one graph) is displayed. This change is caused by one of the updates of Windows or an indicator of a hardware problem? Is there a recommended KB or a patch that solves it?

  original title: change of resource monitor (?)

  You asked: "what version of Windows 7 do you have?" ... Home Premium x 64, SP1 as indicated at the beginning of my first post.

  As my screen name, incurably curious, says I couldn't let it go. Assistance in the meantime, I searched tirelessly and found a cure. I had to make a change through msconfig. I don't have any idea how the settings have been changed because no one else is using this machine.  [????] (Microsoft Security Essentials and Malwarebytes returns own scans; so I doubt that the cause is associated malware.) The following explains what I've done and the results.

  1. I went into msconfig > startup > advanced options and find the number of processors, set one. The arrow to expand a menu drop-down has also shown that a single processor. Which did not make sense because my processor Intel Core i3 2330 M's two core with hyperthreading.
  2. I unchecked the box and restart the computer.
  3. I returned the number of processors as described in #1 above. Expand the menu gave me the choice of 1, 2, 3 or 4 processors. I chose two and checked the box.
  4. I rebooted the computer again.
  5. I checked the monitor of resources (via the Task Manager) and found multiple graphics, I'm used to the display. The graphics are labeled: Service use of the CPU, CPU 0, 1 parked CPU 2 CPU and CPU3 parked.
  6. Parked CPU1 and CPU3 parked show no activity, which is expected. These show only activity when hyperthreading is active, which is rare with the programs I run. Only programs written specifically to hyperthreading use the feature.
  7. CPU utilization service CPU2 and CPU0 show activity as expected.
  8. Manager tasks shows four graphs still now.

  The reason why I know not what to expect is that I have upgraded RAM and completed cooling there are a few months and one of my tools use resource monitor to control the computer. (I used other means to monitor the internal temperature). I managed to run enough programs to use more than 7 GB, the 8 GB available RAM and CPU usage Dungeon in the range of 75 to 100% for more than an hour during trials. Hyperthreading (CPU1 and CPU3) clearly indicated to be active too. Time CPU ran in the range 165F without additional cooling and order of 125-130 with additional cooling.

  I will wait for return of the answers with explanations and/or questions until I got this mark as resolved.

• How to make a text field to accept a capital letter has or a number in the position of the first character and only the numbers after that?

  Hi all

  We have a text field in one of our screen in our mobile app. Currently the user can enter alpha numeric characters in this text field.

  It is now that this field should accept a capital letter A or a number in the position of the first character and only the numbers after that.

  Could someone let us know how to do this?

  Thank you.

  Or, how about the substitution of this abstract method in textFilter?

  public boolean validate(character char,
                          AbstractString text
  int position)