Xbox 360 controller triggers work only not for pc

Similar Questions

• How can I get my xbox 360 controller to work with my computer... Im running the 64-bit version of Vista... my computer does not even recognize the hardware?

  How can I get my xbox 360 controller to work with my computer?... I can't even recognize the hardware? Im running Vista 64 bit on a quad core rig any help would be appreciated... Thank you

  Hello Ghostdogaln.

  How do hang you the controller?  You must either use a * wired * controller, or use a wireless controller with receiver game Xbox 360 for Windows.

  If you use a wireless with a Play and Charge kit controller, it will not work as long as the USB cord only actually plug into the battery for the controller itself. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Xbox 360 controller to rumble does not and windows triggers

  I recently brought a xbox 360 controller to my pc all the buttons seem to work fine execpt triggers, they work with games like halo 1 havnt tested too many other games tho
  He came with the instillatoin disk but still do not work the triggers that bothers me really because I could have made a controller at half price with style ps2 but I perfer the 360 setup
  so, it would be great if someone can help me solve this problem

  ray_mo_321,
  If the controller works fine on other games (all the buttons and triggers), then you know that he is in communication with your PC correctly.  You must look in the configuration of the controller on the game to make sure it can use a controller and is properly configured for this.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Xbox 360 wired remote works only on Windows 7

  Hello

  I have a Xbox 360 wired gamepad that works fine on my Xbox 360. When I connect it to my Windows 10 laptop, it is recognized. But when I connect it to my Windows 7 64 - bit office, on which I want to use it, it is not recognized.

  Here's what happens:

  1. the green ring on the controller flashes

  2. the said driver software installation window "Device driver software has not been installed successfully" and "No driver found" next to controller

  3 device Manager described in 'Other devices' a 'Controller' device with a yellow exclamation on its icon point.

  4. None of the following are displayed in the Device Manager (which should according to here: http://support.xbox.com/en-US/xbox-on-windows/accessories/xbox-controller-for-windows-help):

  Human interactive devices

  • HID-compliant game controller
  • USB Human Interface Device

  Microsoft Common Controller for Windows class:

  • Xbox 360 Controller for Windows

  I already have:

  1 downloaded and installed the Xbox 360 accessories software 1.2 for Windows 7 64 bit on the MS Hardware site. I uninstalled and reinstalled several times.

  2. I tried different USB ports on my desktop, as well front and back, USB 2.0 and 3.0

  3. run the tool material and features like suggested here: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/wired-xbox-360-controller-to-pc-problem-please/b1c4b44e-8482-4630-88e4-da368eb8d650

  4. I tried software update driver of in Device Manager

  5. uninstall the device 'Controller' then reconnected the controller

  all these have failed and led to the same results. Can anyone suggest what else to try?

  Thanks in advance!

  For any other person who has this problem, here is the solution that solved the problem:

  1) go to the Device Manager

  Right 2) click the device with the yellow exclamation mark on it (assuming that the device is plugged) and choose Update driver software. If the Option is not there, click on properties, got to Diver tab, then update driver.

  3) click Browse my computer for driver software

  (4) click on let me pick from a list...

  (5) scroll down to the Microsoft common controller for the window class and choose

  Choose 6) version 2.1.0

  Source: http://forums.xbox.com/xbox_support/xbox_360_support/f/7/t/1576734.aspx

  hope this helps others.

• Xbox 360 controller stopped working.

  My wired xbox 360 controller to record no more on my laptop. I got it almost a year and it works perfectly, but lately the '1' and '4' lights flash once and then nothing. The controller does not appear in Device Manager more and I have uninstalled and reinstalled the drivers but nothing helps, someone at - it solutions? Ive google the problem several times and nothing has helped. I have windows 7 Professional

  Hello

  The question you have posted is related to the Xbox.  Please visit the link below to find a community that will offer in support of your application.

  Support technique Xbox: http://support.Xbox.com/en-us/Xbox-360/browse

  Hope this information is useful.

• Gamepad Xbox 360 triggers work only not on PC in games?

  So as lame as it is, I tried to play Fifa 07, while my 13 Fifa copy shows. However, when the controller configuration I can't assign the control keys as in the buttons of the game, for example, I can't assign the right trigger to use sprint. Anyone else have similar problems in other games? and if so, is there anything that Microsoft intends to do to activate it? I'll be able to assign to triggers in Fifa 13?

  Hello

  The question you have posted is related to the Xbox 360.  Please visit the link below to find a community that will offer in support of your application.

  XBOX support:
  http://support.Xbox.com/en-us/Xbox-360/get-started/home?XR=shellnav

  Hope this information is useful.

• My wired xbox 360 controller stopped working.

  My Xbox 360 wired controller, I bought a few months ago, has stopped working. I have a desktop of windows 7 and a computer laptop windows 8 and everytime I try to plug it into either a green ring appears around the Xbox button and both computers say "USB device not recognized" I installed the drivers on the two computers from the disk included and check the updates of my office. I should also mention this controller is slightly used and did not much physical abuse at all. How should I try to fix this?

  Hi Sukaro,

  We will try the suggestions below and check.

  Troubleshoot your Xbox 360 for Windows controller

  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-help#67640e6f3e804f17a12859c08d1aabba

  With the help of the joystick Xbox 360 for Windows

  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Info

  If the problem persists, I suggest that you follow the XBOX support link below for assistance. http://support.Xbox.com/en-us

  Hope the above information is helpful.

• A wireless Xbox 360 controller will work as a second controller in my PC with the receiver that I have, even if the controller is in a box Xbox 360?

  I have a wireless controller and a receiver to my PC. I want to buy an another wireless without the receiver.

  It is only available in a box Xbox 360.
  I know it's the same controller, I want to just make sure that it will work.

  As long as the receiver is the one for the style of the Xbox 360, it will be. I have one and I use controllers to the Xbox 360 with it with no problems. Just sync and it's ready to go.

• The XBox 360 controller will work on a 64-bit XP computer?

  My machine runs XP 64-bit, and I would like to use the 360 controller to play a few games.  However, the Details tab that describes the controller to say it EXCLUDES the 64-bit version of XP.  On the other hand, I see the drivers and accessories to download files that seem to support my OS.

  Who is right?  The work of 360 controller on XP 64?

  Hello

  If they use a wired remote, this should work: http://www.microsoft.com/download/en/details.aspx?id=8682

• Shift-click eyedropper trick works only not for me

  I would like to have knowledge of Deke McClelland of Illustrator, but I'm only learning...

  He used the Eyedropper to copy just the #1 path #2 path gradient fill (not the shot!)

  Cool!   So, I tried...

  1 created 2 paths - path #1 = blank/outline, path #2 = empty/striped

  2 apply a gradient to #1 path (so now gradient-filled/contour).

  3. made sure 'fill' is selected in the color Panel.

  4 selected path #2 (still empty/rubbed).

  5 activate the eyedropper.

  6 shift - click on the eyedropper over sketch of the #1 path.

  For him, the gradient of the path #1 path immediately fill filled #2.

  For me, the #1 trail gradient fill is now displayed in the color Panel, but path #2 remained vacant.

  I know that I can copy fill + race to the path #1 path #2 with the click of rays of the pipette, but what escapes me in the Tower of his shift-click?

  (I've checked everything in the van of the pipette and apply options)

  Try these settings of the pipette. I need to have two peaks upwards and applies to offshore. Did not work with great efficiency to race on.

  

  RESULT:

  

• Dependent drop-down list of ADF works only not for me

  I used the following example
  
  [http://ranajitsahoo.blogspot.com/2008/05/how-to-implement-dependent-drop-down.html]
  
  I can't list the employee to complete.
  
  I tested my emplist of the tester module app object and the values have been retrieved after that I get my setting for deptid
  
  This is what I checked:
  
  Properties departmentList - autosubmit = true, id is empdeptid
  
  Properties EMPLIST - triggers partial = empdeptid
  
  Def Page Properties:
  Links
  Run with the settings has been added
  iterator is Emplistiterator bind value = bindings. EmployeesView1DepartmentId.inputValue
  
  Executables:
  Call action has been created binded to executewithparms and placed before the emplist
  updating has been configured to render a model
  
  
  Can we see something that I missed?

  Hello

  using invokeAction is not a strong implementation as it fails for applications PPT. It only loads when the page is refreshed and there, it is not very reliable. The best option is to write code in the valueChangeListener for the departmentId field and run the query programmatically.

  Frank

• Find and replace works only not for files in folders

  CC of Dreamweaver (version 13.2) find and replace does not work for 'folder '.... ', "Selected files to the Site" and "current Local Site together".  Works great for open files. Older versions worked fine.  What I am doing wrong?

  Clear your cache.

  Clear Cache corrupted in DW

  http://forums.Adobe.com/thread/494811

  Nancy O.

• mailto works only not for Android smart phones

  Hi all

  I'm developing a couple of websites with Muse and the mailto link does not work on Android phones. When I click on the email link, I get the error:

  The webpage at mailto: [email protected] cannot be loaded because:

  NET::ERR_UNKNOWN_URL_SCHEME

  Is this common? Works for iOS, Mac and Windows, so a little surprised!

  Cheers, Paul

  Hello

  I tried to recreate the same thing at my end of presentation both phone and desktop computer and checked on my Android phone, and it worked fine with no errors.

  Can you please share the URL in question with us so that we can look at it codes?

  Concerning

  Vivek

• Adobe AIR for Android as3 codes work only not for this one project

  I am using the accelerometer in my flash game, which works for all the other projects I'm trying, but for some reason any on a project if I try to use it I get, using the same code that I've used before, such as this one.

  1046: type was not found or is not a constant of compilation: accelerometer.

  1180: call to a method may be undefined, accelerometer.

  It is a quite old file, not if old, then, are there files I have to add to make it work or I need to change the settings? It's very frustrating, I don't know what the problem might be. Can someone help me?

  The error message indicates it does not find the class.  Make sure you import it:

  import flash.sensors.Accelerometer;

• < cfqueryparam with null attribute works only not for me >

  Using SQL Server 2005 and CF801.  I have a field in my table defined as (int, null).  In my .cfc CF function.

  < name cffunction = "createReference" access = "remote" returntype = index 'string' = 'add a reference unit.  The success of ReferenceID back on return error message. ">

  < cfargument = "intsteam_cap_mwe" type name 'digital' = required = "no" default = "0" >

  < name cfquery = "insertReferenceData" datasource = "#application. DSN #">"

  INSERT INTO units

  (

  SteamCapacity_MWe)

  Values

  (

  < cfqueryparam value = "" #arguments.intsteam_cap_mwe # "cfsqltype ="cf_sql_integer"= null" #YesNoFormat (NO len (trim (arguments.intsteam_cap_mwe))) #">"

  )

  < / cfquery >

  < / cffunction >

  However, it gives an error "INTSTEAM_CAP_MWE the argument passed to the function createReference isn't digital type."

  In my old code, I used < cfif to test if the value is not numeric, then assigning a value of 0.  This method works.  However, I have so many fields and many < cfif s so I would use the < cfqueryparam > NULL attribute. In the code above, it's just one of the many areas inside my cffunction.

  Help, please!

  Thank you.

  me1019 wrote:

  In my form, I'm not fill this field as a test for the . I thought that this will take care of this situation.

  Nope. Even if you leave the text box empty, still defined sound. If you pass an empty string as Steve.  An empty string is not a number. If your function is complaining because you have already told him to expect a number:

  type = "numeric" required = "no" default = "0" >

  You either have to force the value to be digital, such as use val() or change the type argument.