first charge

Similar Questions

• The remote control comes charged out of the box or it must first charged?

  The remote control comes charged out of the box or it must first charged?

  It is usually quite busy, mine was about 85% when he arrived. It's a question about the pre purchase or you have a problem with your remote control works not.

• Accidentally disconnected Macbook Pro on the first charge

  I've been advised to load my new Macbook Pro 13 "8 hours for the first charge. I plugged it in for about 5 hours and the charger got accidentally disconnected from my mac but I've not noticed until 3 hours later and then I immediately plugged my charger in!

  Something will happen to my computer? Which would cause a detrimental effect for the performance of my battery?

  Thank you!

  Ellenayoung wrote:

  Something will happen to my computer? Which would cause a detrimental effect for the performance of my battery?

  No, nothing will happen for her and she will not affect the battery or the computer in anything.

• The 6s battery first charge

  Hey! I'm very confused about the answers I found on the Internet. .. I just bought a new 6 s, and I don't know exactly which is the right way to load for the first time. I used it until the battery is dead (it's what they told me at the store to do) and now he is in charge while it is turned off. I don't know if I should allow more time on the charge or not. And after the first load, how do I load it properly? Help, please! Thank you!

  You can reload at any time, for any period of time.

  It is not possible to overcharge the battery.

  It is good to use the phone while it loads.

  Don't impoverish not several times the battery at a low level.

• First charge 10

  I have items 10 and 10 on 1 disc first. Very well, the items loaded, but first says can not support the package. I have XP, service pack 3, 64 x 2 dual core 6000 + 3.00 GHz and 3.00 RAM what else do I need to load?

  Check the system requirements and provide more information:

  http://www.Adobe.com/products/premiere-elements/tech-specs.html

  Mylenium

• I have a document shared in the cloud. When users click the link, they see a column on the right of the document's details. How to hide this column (at least on the first charge)?

  Hello

  I would prefer that users who click on the link I send do not see the right column of document's summary information. Can I hide it? It is in order of appearance, no secret.

  Unfortunately, there is no way for you, the sender, to remove this default. I will submit your request to the product team.

  There is a way for the recipient to hide the right panel. Simply click on this button:

  

  (I realize that this is not what you're asking, but thought I would mention it.)

• Is creative cloud assumed just sitting there on the first charge?

  So I bought a creative cloud subscription.  And I installed the creative application of cloud for Mac.  And I tried to open it, you know, to connect and use applications.  Instead, I now get the attached picture for several minutes.

  Is this normal?  I must just sit here for a while and wait that he decides to actually do something, or it is broken?

  

  Uninstalling and reinstalling seem to have worked.

• Where can I get a new charger for Satellite Pro L500 - 1 4?

  Hi, I would like to get a new charger for Toshiba. My first charger was lost and the second charger that I bought on ebay 3 months ago for £10,-a stopped working. Where can I get a charger? I googled and found a few wesbites for example

  http://www.electronicavenue.co.UK/Toshiba-Satellite-Pro-L500-1D4-laptop-charger-6380-p.asp

  Chargers cost about 25-30 GBP. I don't want more problems with a charger. I have the late...
  Where can I get a good charger where that is authentic. Other suggestions are welcome

  Thanks in advance

  The magazine you found is OK and I think you don't need original Toshiba charger.
  If you want to have Toshiba we part number is PA3716E-1AC3.

  Check it out. Googling around you can find it.

• Nine computer Compaq 610 laptop charger does not work. Help, please!

  I went through 3 Chargers and charger port repair.  I am so confused about why not charging my phone.

  My first broken charger comes out of usury, but he had to stand on a corner charge.  I really want to continue to use it so I help him on an angle so he could load.  It ruined the port and the charger completely.

  The second charger, I bought was from Hong Kong on eBay, I know your probably thinking that wasn't a smart move, but he had the right replacement part number it is said on the first charger.  This charger was incredibly hot but he quieted worked for awhile.  Finally one day rubber melted and was all dealt with.  It melted if bad it was bad to get the magazine back in the port, but I got it.  Then after that use more rubber would melt it got warm every time and once the charger would not come out.  I pulled it out with a lot of force and then the final piece got a little separated from taking part.  Then the charger now must be held in hard and a slight tilt to make it work.

  I bought a new one with the right part number and it seems to be smaller than the three other broken.  I just plugged it in for the first time a few minutes ago and it started to load perfectly for about 20 seconds.  I was so releived, until I checked a second time and he stopped to load!  I don't know why, but it is not only in charge at all!  I plugged again many, he waved a little and tried to take the battery out and then try to turn on my laptop.  But no matter what I do it still will not charge.  Is the most funny thing is that the old one can still.

  I called HP to help and the talker suggested using "active chat" online with them.  He can't have my phone so I can't speak for them.  I tried FAQ and reading the forums of other people, but nothing helped.

  Can someone tell me why on earth that keep breaking all shippers of m.  Even though I bought a new and my laptop reparied it still broken.  I treated the new one with a lot of care.  Can someone also tell me why there is a new not work and why is the old man?  The problem with my computer laptop port battery etc or is it just the charger?  If I did not explain something correctly, or you need more information and where I bought things and my laptop and charger specifications and details please ask and I will tell you in detail.  This forum post is one of my last hopes.  Please if you cannot resolve the problem yourself at least guide me to who or where I could get help from.

  If you have read all this I thank very you much for your help and please if you have any information to tell me.  Thank you regarding any future assignment.

  I have no idea why, but I changed the portion of the charger that goes into the wall with the former and it started to load!

  Thank you for answering anyway, but it was not the port.  Yes, he finally goes to work now! YAHOO

• BlackBerry Smartphones first recharge new battery

  I've recently updated to a Bold 9700 & want to make sure I have properly recharge the battery for the first time in order to ensure the best performance for the future. I searched the messageboards & am left confused as to what to do for the best.

  In desperation, I talked to a boy of my carrier O2, technical support team, who advised the battery for a total of 16 hours initially in order to condition it before using the phone for the first time.

  At its correct advice, or do I just charge the battery until the phone shows it has a charge of 100% on this subject?

  No indication on this would be highly appreciated.

  As far as I know, the first charge is always about 16 hours for most cell phone batteries. If you let it, even though it says 100%.

• BlackBerry Smartphones blackBerry owner first needs help.

  I got my first BlackBerry this weekend and am currently waiting for the battery to run out before you make the first charge as suggested by the guy in the Orange shop.  My battery is currently very low.

  So, today I added my email account and active BlackBerry Internet Service account.  Now, I'm not able to send text messages when I try to make a phone call that says battery too low radio use and I don't seem to have any internet connection or signal.

  Help!

  Thanking you

  Charge the battery. You do not want to drain the battery less than 10-15% anyway. Once the battery is charged, you will be able to go in manage connections and re-enable the mobile network.

• First 14 will burn DVD but won't burn Blu Ray. On the same computer 11 first has no problem burning DVD or Blu Ray. Issue. Why dooes 14 does not. What can I do

  Can anyone help on why my first charge up to 14 will not burn Blu Ray but will burn DVD still 11 first on the same computer has no problems burning Blu Ray or DVD. ? Thank you. RB

  What operating system do you use?

  What brand of computer are you using (HP, Dell, etc.)? Have you spent at the web site of the manufacturer and installed the drivers from HP, Dell, support of any web site page? Sometimes drivers that Windows installs are not as effective - especially if you have recently upgraded to Windows 10.

  There may be other factors, but we will need a lot more information in order to solve the deeper problems.

• Previous data of module are replaced with the charge of the latter

  Hi friends,
  
  Once the Planner data are loaded into the data warehouse and after that I see the data of the SCM module I have loaded before using the DAC in the BI dashboard in which he is visible in the BI dashboard before loading the module projects.
  
  And also after the data of the SCM module is loaded, I don't see Finance and HRMS data that are loaded before using the DAC in the BI dashboard.
  
  Im not sure this problem why load the recent module is superimposed on the previous module to download the data into the data warehouse.
  
  What is perhaps the reason for this problem. Dint always not the cause of this problem.
  
  Thank you
  
  Kind regards
  Saro

  Try to create a new EP with required modules do not check at full load.
  Once you build the new EP CAD tools use to reset the data warehouse and run the EP, the first charge would be assimilated at full load and followed loads are levels
  If you want to go full charge just reset the data warehouse and run EP

  Just in case if you want to add another existing module EP just add these respective fields and build the EP and start to run the EP. In this case, all the other modules are run as Incr Mode and the new module like the full Mode.

  It should work.

• Dynamic mapping (flash) - no data found on first page load

  Hi all
  
  I have a dynamic chart that is driven out of a menu drop-down select no null value allowed. The default value is generated dynamically as well. When the graph is generated when the user first connects, it returns no data, if I can see the select session variable is set correctly. How can I make this table display correctly on first load, without the user to reload the page?
  
  Application of graph:
  Select the null link, decode (is_recommended, 'U', 'Missing Data', 'Y', 'Meets standards of TBT' ', 'Non-compliant') label, value1 round(cnt/total*100,2)
  "OTC". "" V_SCORE_ROLLUP ".
  where common_name =: P11_INSTANCE
  
  The default value for P11_INSTANCE is set to the following plsql:
  declare
  name v_score_rollup.common_name%TYPE;
  Start
  Select MIN (COMMON_NAME) in the name
  of V_SCORE_ROLLUP
  cases like: P11_SBUSINESS;
  return the name.
  end;
  
  P11_SBUSINESS is set to the default of %. An array of result hunted the same variables work properly on the first charge.
  
  Thank you!

  You need to set up a page or process a calculation that will define the value of your drop down if it is null. For some reason, set the default values for the properties of the element is not enough.

• Pagination fail on the first load

  Hello
  I didn't know how this search if there is no post on this subject, I would be happy to check out them.
  
  On the first page load, the report seems in good condition with the news, but when I go to the next page, it is said that has not been found no results. If I come back and submit the page, then go to the next paging in the report he found the data. Even if I send the page before moving on to the second paging.
  
  At a meeting, I noticed that the elements have a value until the first submit, but the report of NVL and should not be a problem, test of this is that the first page in the report shows the content correctly.
  
  Any ideas on why I send the page before the report pagination works? If so, how can I do so that it sends the page to the first charge?
  
  Thanks in advance,
  Marc

  Hi Marc

  Assuming that you have filters on your page, including selection lists, this is pretty typical. Is what I tend to make lists of selection used as filters to define the default values for nulls (-1 for numerical values) and ZZZZ for strings AND these values are defined using calculations of page (depends on the item is null and set to run before header). In this way, the elements have values already for them in the session before the report is even loaded.

  Andy