First does not export a certain layer?

Similar Questions

• Envy 17 17 t-j000: HP Envy 17 suddenly goes into hibernation, does not beyond a certain point

  Last week my laptop has been experiencing some battery problems.

  First of all, I noticed that when he got about 25 or 30% of battery, he would suddenly mode 'sleep' (at least that is what I think it does. When I plug it in and turn it back on, the HP loading screen appears, but everything comes back to exactly how it was). Once the battery has been reduced to 1%.

  In addition, it does not load past certain percentages, which are progressively more low gretting. At the beginning it was 98%, while 93% and just 35%.  He will say that he is in charge, however.

  When I use HP Support Assistant, my battery is displayed as 'Okay '. My friend used a program that drained my battery so fast that it could (I apologize that I don't remember what this type of program is called) and I think he said that he had done in about 25 minutes, which is expected of a laptop of this age (about a year and a half).

  @Fletcher089 ,

  Please report back and that was great info by the way.  What you showed me the battery you have past, however, it is on its way. It has a dead cell and other cells are harder to provide enough oomph to keep things happy.

  You will not get a full charge of the battery at this stage, and it can disturb your hibernation systems.

  I look to see what is available for replacement or run your system without the battery and just the power until you get a new one.

  I hope this has been helpful

  I thank you again for posting.

• First HP: HP first does not start after upgrading firmware 20160414

  Hello world

  Yesterday, I tried to update the firmware of my first HP as the connectivity kit he advised. Now, the first does not start.  The only way I can get it to do something, is pressing the Symb key and reset at the back. It then enters the V16 recovery mode.

  I am able to download the firmware, but after that it just does not start.

  I have reinstalled the kit connection several times.

  I used the option "use the new method of update" in the connectivity kit. But it won't help. I tried to download older versions of firmware.

  I tried the factory reset options: A, F, key simmultaneously O and then with the reset on the back

  I tried the Apps, Esc, now.

  It just does not start.

  Any suggestions anyone?

  With sincere friendships.

  Sigurd

  Ziggy76 wrote:
  

  Hello world

  Yesterday, I tried to update the firmware of my first HP as the connectivity kit he advised. Now, the first does not start.  The only way I can get it to do something, is pressing the Symb key and reset at the back. It then enters the V16 recovery mode.

  ...................
  

  It just does not start.

  Any suggestions anyone?

  The suspect first IMO is win10. You are a brave man to make an update based on win10. Try to do this on a computer with 7 or 8.

  Some on this forum may say they made a correct update of the firmware with 10 victory.

  However, to win 10 is known to his problems with the drivers and the software which is not original ms or not correctly connected.

• AutoComplete does not work on certain forms

  I read the help article indicated this:

  > AutoComplete does not work on certain forms

  > If you find that Firefox will save the form entries for forms on some Web sites only, but not on others, the site may be say Firefox does not save form history. This is especially common on email and Bank Web sites.

  But I want to save the information for some of these sites. How can I manually enter the information, so that Firefox it tells when I navigate? Is this possible?

  This bookmarklet makes the browser ignore autocomplete = "off" temporarily, allows to save passwords even on sites that use autocomplete = "off". Should work the same for the form data.

  Don't forget to bookmark password:
  https://www.squarefree.com/bookmarklets/forms.html#remember_password

• Why netstat does not export cumulative values?

  I would be grateful if someone could explain why the following does not export the cumulative values as implied by the manual page:

  netstat - I have en0 w 5 b

  Hello

  Quote from the page for netstat (1).

  If a timeout is specified, the protocol information on the last seconds of the interval will be displayed.

  And I get something like this:

  $ netstat -I en0 -w5 -b
              input          (en0)           output
     packets  errs      bytes    packets  errs      bytes colls
           3     0        210          1     0         90     0
          25     0       1927         38     0       2503     0
           5     0        379          7     0        451     0
           0     0          0          0     0          0     0
  ^C
  $
  

  Tested under OS X 10.6.8.

  Kind regards

  H

• Windows Vista mail program does not export the files all contacts

  After I exported my contacts from e-mail in vcf format windows in a new folder on my desktop, I noticed that NOT all contracts are present in the new folder.   If the contents of the folder, I show the long side windows messaging contacts which I exported the contacts I see some (to be precise, 256) are missing in the new folder. I exported 3 times, each time in a new folder and get the same results. I see that some of the missing files are group folders (apparently Windows Mail does not export to group files in vcf format) but the other files are simply not in the contents of the desktop folder.

  How can I get all the files AND folders in groups to export correctly?

  I was going to say that if you were interested in the migration of these contacts to another Vista computer, you can simply copy the file C:\Users\username\Contacts to your USB and then copy it to the other computer. Which retains all the attributes, including groups.

   

  For any other use, you're stuck fairly well with help of VCF or CSV format to export/import. Sorry, I have no idea why so many contacts are missing when you did.

   

  There is another method (roundabout). Install the free Windows Live Mail program, which will automatically import all contacts from Windows Mail. Be sure to select the option Live ID when prompted by the installer of Windows Live Mail. Therefore, you can keep all your contacts in perfect sync with other computers running Windows Live Mail, and you also have access to the contacts on any computer connected to the Internet by simply go tohttp://contacts.live.com and sign in with the same Live ID.

   

  Gary van, Microsoft MVP (Mail)

  "moiici" wrote in the new message: * e-mail address is removed from the privacy... *

  You said the following: " " Windows Mail is not for the export of groups. If you'd tell us what you intend to do with the exported contacts, we are able to offer a workaround solution. »

  My answer:

  I want to export my contacts to a USB key that I can take with me and be able to view them on any other PC. I have already established that if I save as the original file extension IE .contact ,, I'm NOT able to view on a computer that is running the Win XP operating system because who uses the email program Outlook Express and the file extension is .wab. I have not yet tried view the contacts vcf on Win7, but as I understand it, I should be able to view the contacts to vcf on that too.  My problem is that I'm missing 256 contacts after I export . I understand that windows Mail export NO groups, but there are only 9 groups from my list of contacts. WHY other contacts don't get exported? I'm doing something wrong and if so, what?

  I appreciate any help you can give.  Thank you and have a nice day.
  

  Gary van, MVP (Mail)

• My 13 items first does not recognize my Sony HDR - HC7 camcorder.  All solutions?

  Hi, my 13 items first does not recognize my Sony HDR - HC7 camcorder.  All solutions? Rgds, Peter.

  PE13 does no more than the hdv camera support.

  Use HDVSplit to capture hard disk and then import them into PE.

• First does not recognize the video modules.

  First does not recognize the video modules. I have updated the readers without results, also update the bios. All the other adobe products work except the first.

  You have a laptop with dual video?

  -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html

  -http://forums.adobe.com/thread/1001579

  -Use the BIOS http://forums.adobe.com/thread/1019004?tstart=0

  -Why link http://forums.adobe.com/message/4685328

  -HP Fingerprint/password in conflict http://forums.adobe.com/thread/911575

  -Utility from Mac http://forums.adobe.com/thread/1017891?tstart=0

• Audio waveform does not display setting Audio Layer

  I am using the plugin to waveform audio AE for the first time, and the setting of Audio Layer does not appear.

  

  Audio plays well in AE.  No idea why that is not displayed and how?  Thank you.

  I understood what is the cause of the problem but have no idea why.  I have a text layer with a bunch of pseudo code created to Hacker Typer if I delete this layer then layer Audio property is displayed in the plugin.  Also, if I wipe the text on that layer and replace it with something like 'test' setting appears.  It's weird because the audio waveform plugin is on a completely separate layer and I do not know why the source text of a different layer would cause that to happen.  Well, at least I know what is the cause and a workaround can understand.

• Why my lightroom does not export the edited versions of my pictures?

  I edit all my photos in lightroom and it worked for me in the past. Recently, something happened with my computer, I decided to save my photos on a disk outside, just in case my computer does not turn in a single day. I saved the catalog to my hard drive, it was wrong to me? When I opened first lightroom after it backs up it said something about 'do not find the catalogue' so I just hit well and saw that all my photos were always there so everything was OK. But now that since my lightroom exports only the originals of the pictures, even if I change the photo. I have not found someone with the same problem and I'm really at a loss at what to do. Someone please help. I have wedding photos that are supposed to be done for someone soon so I really need this fixed a problem.

  I got really the problem right after I posted this. I could have sworn that I deleted my question. Thanks in any case!

• Tablespace does not use a certain data file

  Hi all, I am new to Oracle DB. Reported by developer that storage space is full, and then I found that there are two data files associated with the storage space by checking dba_data_files. The first data file size is already full of 32GB, and the second is 8GB. However, it seems that the tablespace does not use the data file second when I check the free space of the tablespace because I cannot find its use. That's why Oracle DB shows ORA-01654 and tell me to add another data file. I fix this by adding another data file. But I'm just wondering why it seems that the tablespace does not use the second data file, I checked the status of second in the data file is online of v$ datafile. Could someone give me an idea about this problem? Thank you very much.

  c115bca7-E432-460f-a0c5-273b2157dcbe wrote:

  Hi all, I am new to Oracle DB. Reported by developer that storage space is full, and then I found that there are two data files associated with the storage space by checking dba_data_files. The first data file size is already full of 32GB, and the second is 8GB. However, it seems that the tablespace does not use the data file second when I check the free space of the tablespace because I cannot find its use. That's why Oracle DB shows ORA-01654 and tell me to add another data file. I fix this by adding another data file. But I'm just wondering why it seems that the tablespace does not use the second data file, I checked the status of second in the data file is online of v$ datafile. Could someone give me an idea about this problem? Thank you very much.

  1 cause the second data file - is not activate with auto-extend and its fixed size, 8 GB, which could deliver the extensions are not free - filled and that you may not able to find any free extends from dba_free_space
  2. Please activate auto extend for this data file and add the new data file based on space allocation.

  -Pavan Kumar N

• Updated 2015.3 AE and first does not

  I've just updated (Windows 10).

  After effects does not start.
  First gives an error at the start screen and crashes.

  Accident similarly to the splash screen for Media Encoder.

  I already rebooted etc etc...

  PS and I are working properly.

  Looks like is a matter of "video suite".

  I am pleased that, as usual, I have kept the older versions.

  Is there something I can try to make the new version applications work?

  Thank you

  To sum up, long story short:

  (Windows 10) If your CC (updated June 2015) crash at startup applications, try the following:

  -Beginning of the apps as a new windows user

  -Clear preferences (move the desktop preferences file)

  -Remove the old versions of the software

  -Run cccleaner or similar to clean your system and registry

  -Remove the codecs of scripts/plugins/3rdparty

  If none of the above works

  -Use the cleaning of Adobe and all Adobe tool and manually get the files of Adobe (use the creative cloud cleaning tool to solve installation problems) and then reinstall Adobe CC suite.

  If it hangs still, sorry, but:

  -Reinstall windows (clean install) and whole suite Adobe CC.

  It worked for me. But even with a facility clean, I always have problems with start-up (gel), but then it works.
  We will see with the next update, I hope I didn't format it again!

  UPDATE:

  I also discovered something I haven't tried before formatting and may have solved the problem.

  As someone said on another post, as I had the GDIPP module for font smoothing.
  Deleting GDIPP solved the problem for another user.

  Thanks to all who helped.

• First does not suite extension symlinks for the network drives

  Hey folk from Adobe.

  I'm developing an extension for the first I like to find in a shared network folder. If I place a symbolic link in the extensions folder that points to a path on my local drive, everything works great. Thus, for example, from this directory:

  /Users/ [user] / Library/Application Support/Adobe/CEP/extensions

  I have create this symbolic link:

  extension-My->/some/LOCAL/path/library/first/my-extension

  ... everything works fine. But if I change the symlink to point to a network location:

  extension-My->/some/NETWORK/path/library/first/my-extension

  Then, the extension is not available in first. Is there a reason, that you can think of this first would prefer symbolic links to the locations the over the symbolic links to the network locations?

  See you soon,.

  Raphael

  I can think of many reasons related to security now does not re - runs.

  Extensions must be installed by modules, or ExManCmd; both place files in the correct location.

• Why Lightroom 6 (latest version) does not export my photos on the hard drive?

  When you export images to a collection, this hinders Lightroom 6 (latest version) and export remains incomplete. Must use Force Quit to exit. An idea that I could do to make the export work?

  If this does not work, I suggest you to make happy going back to Lightroom 6.1.1 because it to other users who are facing this problem.

  Rear roller: Instructions to restore an earlier version of update

• What is the problem with new OS El Capitan? First does not work properly

  I just installed the new OS El Capitan, but first gives me a lot of problems. Preview works when I play timeline shape, but when I stop the video preview becomes kind of red with a lot of scratches. Another project does not recognize the clips on the timeline

  I'm in a deep deep deep Sxxx I need to work

  Here, the solution solved the problem for me, that sounds like the same problem I had.

  Re: Premiere Pro graphic problem?

  Best,

  Joel