Envy 17 17 t-j000: HP Envy 17 suddenly goes into hibernation, does not beyond a certain point

Similar Questions

• HP ENVY Sleekbook 6-1126sa - Mute LED does not

  Name of the product and operating system

  • HP ENVY Sleekbook has 6-1126
  • Windows 8.1

  Description of the problem

  • LED MUTE does not work/display
  • Nothing has changed I'm aware

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58502.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, close the laptop by holding down the SHIFT key when you click Shutdown to stop temporarily a boot hybrid.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the laptop.

  Kind regards

  DP - K

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

• Envy 15 t-j100 card reader does not

  I have a HP ENVY 15 t-j100 Quad Edition running Windows 7. His card reader does not work. When I insert an SD card, I get a message that the device is not installed correctly. Windows prompts you to update me the driver, so I let him, but he can't find the driver. In devices with SD card inserted, Manager it shows a symbol in the "Other devices" section "hard drive"with a yellow "!"  The State of the device reads:

  "The drivers for this device are not installed. (Code 28)

  To find a driver for this device, click Update driver. »

  I tried to update the driver from there, but still no driver is reported to be found.

  Furthermore, Device Manager indicates that the Realtek PCIE card reader works properly. I updated the driver using sp66065.exe, but there is no difference. The card reader is still not read, nor is it a drive letter appear to the inserted card.

  If I disable the Realtek PCIE card reader, then the "other devices" "Hard drive" in the Device Manager goes. But the card reader does not work as long. If I activate the card reader, the same error comes back with a yellow '! ' under 'other devices' "Hard drive" in the Device Manager.

  Could you please tell me how to resolve this situation? Thank you in advance!

  jacksan1

  You are the very welcome!

  Oh... It's big, happy that the problem was solved after recovery

  It would very probably be updates of Windows.

  Try to create a system restore manually each time before performing any installation of update or something important. You can restore to a previous restore points you have created, if a problem occurs after an update.
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  You can also create a shortcut to a button in your office so that you can easily create manual restore - Option 1 point in the following tutorial:
  http://www.SevenForums.com/tutorials/494-system-restore-point-shortcut.html

  System Restore: http://www.sevenforums.com/tutorials/700-system-restore.html

  I would also change the Windows Manual Automatic Update settings.
  This must be done in the HP support assistant program too - its control panel.

  I hope this helps.

  Have a good weekend
  God bless you.

  Concerning

  Visruth

• ENVY 15 3040 nr recovery disc does not

  Hello

  I made a recovery disk set as soon as I bought my ENVY 15. I accidentally deleted all partitions, then tried to recover by using the disks that I did... but I get this error by...

  The system recovery media does not support this computer.

  You are not able to restore the system with the media.

  0110 A9P60UA #ABA - A9P58UA #ABA

  Help, please!

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Envy 17 F7T68EA #ABU: Trackpad sometimes does not

  My trackpad sometimes will activate not a link, or frequently emphasizes not the scroll bar and it will not move when I click in the empty part of it. He also sometimes does not respond when I try to move the pointer.

  This occurred regularly since I bought the laptop.

  Synaptics Pointing Device Driver - Synaptics Incorporated - 17.0.8.0: no update available.

  Can anyone help?

  Hi @NineToTheSky ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question on your HP ENVY 17-j130ea Notebook and Touchpad issues. Here is a link to troubleshoot the Touchpad. If you go to the section setting of TouchPad and ClickPad pointing sensitivities that should help solve the problem.

  Please let me know how it goes.

  Thank you.

• HP Envy 7640: Wizard of the printer does not - HP Envy 7640 UDCString_UDCName error

  I am able to print, scan, copy and fax on my HP Envy 7640 printer very well.  However, when I click the icon HP Envy 7640 for the Printer Wizard just to check my ink level, for example, I get a script error.

  An error has occurred in the script on this page

  Online: 42

  Tank: 17

  Error: Unable to get the "UDCString_UDCName" reference to undefined property or null

  Code: 0

  URL: file:///C:/Program%20Files/hp/HP%20ENVY%207640%20series/Bin/HPSPProgress.hta

  Do you want to continue running scripts on this page?  YES NO

  Before I can even click on YES or NO, the screen changes to show the following. There is a yellow triangle with an exclamation mark next to this error:

  HP Printer Wizard

  Series\Bin\UDC_files/UDC_Main.JSON HP HP ENVY 7640 C:\Program

  Series\Bin\UDC_files/tasks.JSON HP HP ENVY 7640 C:\Program

  Series\Bin\UDC_files/URL.JSON HP HP ENVY 7640 C:\Program

  Series\Bin\UDC_files/localize_1033.JSON HP HP ENVY 7640 C:\Program

  When I click OK, I get:

  HP Printer Wizard

  Stop running this script?

  A script on this page slows down your web browser to run slowly. If it continues to run, your computer may become unresponsive.

  I connect to Internet through LAN.  My printer is connected to my pc through USB.  I do not use of wireless.

  I did not any changes to software or driver.

  I read through many solutions in this forum and tried several.  I disabled my firewall and antivirus first.  None of them have worked. I tried the SCLiteFix_299026.exe, the missing persons files difficult.  Did not work.  When I try to uninstall the printer and reinstall, I can't do that either.  I get error 2503 and 2502.

  I want to just my printer wizard to work and have been unable to find a solution.

  Maybe not all of these steps were necessary, but here's what I did and it worked! :

  (1) open HP Support Assistant icon on desktop.  It is a white question mark in a blue circle.

  (2) HP Support Assistant should show all HP devices.  Find your printer and click on UPDATES.  (Mine had no updates pending, but I clicked on UPDATE anyway)

  3) click on Diagnostics and tools

  4) click on HP print and Scan doctor.  Select your printer and click NEXT

  (5) you will get DIFFICULTY PRINTING and SCANNING of DIFFICULTY.  I chose the DIFFICULTY of ANALYSIS

  (6) when he finished, a screen opens and says "If you still have problems with your product, here are a few options for additional support.   Physically, I removed the printer cable to the USB port and choose "UNINSTALL AND REINSTALL with the latest version of the software".  I wasn't expecting to work, but he did.

  (7) I rebooted.  When my pc came, I began to other programs or applications.  I have disabled the firewall software and anti-virus temporarily.

  (8) I have re-inserted cable printer to a USB port

  (9) I open the HP Envy 7640 installation disc and click with the right button on the file: E7640x64.msi.  I clicked on install

  (10) software installed without error.  I then went to my office, clicks on the icon HP ENVY 7640 series... and VOILA!  My Printer Wizard now works!

  (11) I turned on my firewall and anti-virus back and I'm IN business

  Hope these instructions can help someone else.

• HP envy laptop bluetooth for connection soundbar does not

  I have a laptop HP ENVY 15 "TouchSmart m6 Sleekbook.  Bluetooth works.  I have a bar of its Samsung to my TV which is bluetooth.  The laptop detects the sound bar, but will not pair with it.  Any suggestions?  Thank you

  Hi @ndcycle,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your m6 Sleekbook of HP ENVY TouchSmart connect not not Bluetooth you soundbar. Here isa documenton the connection of Bluetooth devices.

  I hope this helps.

  Thank you.

• HP Envy laptop m6: Simple pass touch does not

  Product number is C2L91UA #ABA. I can't get my simple pass key scan to work. Is there something I have to do?

  I expect that you tried to update your drivers to http://support.hp.com/us-en/product/HP-ENVY-m6-Notebook-PC-series/5296045/model/5312255/drivers/ ?

• HP Envy 15 - q47002 i7: laptop overheating, does not recognize any USB. Even in the Bios.

  Hello

  I bought this product last year, so my warranty wore off.

  My laptop is overheating and it is very slow at this point (even videos are not working well). I tried to clean it up but it was without result.  I want the game and computationally intensive applications, but I'm afraid of the motherboard or hard drive failure.

  Now to the point. I can't install the new OS, any OS because this laptop doesn't have a DVD player and it doesn't recognize any usb 2.0 or 3.0.  I tried to change the options in the Bios and I tried to uninstall and install the drivers (they are up to date).

  What should I do? I can't install a new system because of this problem, and I can't use anything more demanding than youtube which is really annoying since this laptop has good specifications.

  I am currently running Windows 8.1 which I got when I made a purchase.

  I hope someone answers!

  Thank you.

  EDIT: In the Device Manager it says device not installed with yellow exclamation point. By Usb or ext hdd. And it will not find the device-specific drivers. As I never need them on another PC or laptop.

  Hi @HarunC,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP ENVY 15 t-4710HQ i7 Quad Core Notebook and questions with serveral fuctions works do not. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  With the USB not recognized by Windows.  Here is a link to solve the USB connections.

  I would like to uninstall everything cited first in the list of universal serial bus controllers.

  Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices before you uninstall the controller Universal serial bus.

  Restart your computer, and then insert the USB device.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a link if you need to download drivers USB Intel for Windows. This is a utility to update.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• HP ENVY dv6-7309tx Notebook PC (laptop does not smooth)

  I have a problem with my laptop. When I reduce windows, he's not going smoothly and a little slow when I open a browser.

  Hi AustinChandra,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP ENVY Notebook dv6-7309tx and having problem with performance. Here is a link to cool your laptop. Click on refresh your computer from the startup screen. You can also watch somethings that will help your system performance in this document.

  Hope this helps you.

  Thank you.

• HP ENVY 4500 E - ALL - IN - ONE: HP ENVY 4500 E - ALL - IN - ONE DOES NOT PRINT

  I can't print from my desktop PC with an ethernet connection, but I am able to print from my laptop with a Wi - Fi connection.

  The printer used to work on my desktop PC, then I upgraded to Windows 10, made the operating system was not entirely compatible with my PC, reformatted it with the help of remote support Microsoft, back to Windows 7, had a lot of problems with Windows Update and WIndows Installer and so also with the installation of the driver.

  I tried installing from the original installation CD HP Envy with no luck, uninstalled and reinstalled with the latest driver from the HP website with no luck and since (apparently) to solve the problem with Windows Update and WIndows Installer, uninstalled and reinstalled the driver software on the CD again with no luck.

  I tried all the suggestions on the forums, with my computer hang too for the first time in weeks at the recommendation of msconfig on your forum for disabling startup programs.

  The scanner works.

  Sometimes, in Word, I get a message error "Windows cannot print due to a problem with the current printer setup". Sometimes I have no message.

  (I use Service Pack 1)

  Hi HPAGJ,

  Thank you for coming back to us.

  Gemini02 is currently out of the office so I thought jump in and help.

  When you run the PSDR, have you selected the connection "network (192.168.2.107) is not installed? Being not fully installed is causing the problem.

  There is corruption on the computer, this can certainly occur after you upgrade your operating system. I suggest to try the following steps in the following order for best results.

  • Make sure that all of your Windows updates are up-to-date.
  • HP printers - uninstalling the software of the printer (Windows)
  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  Manually delete the print driver:

  This problem occurs if there is printer drivers are corrupt.
  I suggest that you remove all installed printers and reinstall Windows 7 printer drivers if available.
    
  Remove a printer
  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.
  2 find the printers installed icons, then delete them.
  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".
  4. on the tab drivers, select them printers list and click Remove. Please, select Remove driver and driver package.
  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".
  6. try to remove all related printer software.
  If the problem is not resolved, I suggest that you clear the money printing system.

  Step 1
  ======
  Start Windows Explorer, and then rename all the files and folders in the following two folders:
  c:\windows\system32\spool\drivers\w32X86
  To rename a file, we can click with the right button on the file and select Rename.
   
  Step 2
  ======
  1. Click Start, type REGEDIT in the start search bar and then press ENTER.
  2. navigate to and then click the following registry key:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86
  View the list of subkeys. There should be only the following subkeys:
   
  Drivers
  Print processors
  If there are any keys other than those listed above, follow these steps:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type WindowsNTx86regkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than drivers and print processors.
   
  Step 3
  ======
  Find and click the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key. View the list of subkeys. There should be only the following subkeys:
  BJ language monitor
  The local port
  Microsoft Document Imaging writer monitor
  Microsoft Shared Fax Monitor
  Standard TCP/IP port
  USB Monitor
  WSD port
  If there are any keys other than those listed above, follow these steps to remove them:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type Monitorsregkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than the above 5.
   
  Step 4. Disconnect the printer from the computer and restart the computer.
   
  Step 5. Reconnect the cable from the printer to the computer, install the printer according to the manufacturer's installation instructions and then check if the problem persists.
   
  You can also use these two articles for this problem:
  http://support.Microsoft.com/kb/2000007
  http://support.Microsoft.com/kb/933454

  • Download HP ENVY 4500 e-all-in-One Printer series full feature software and drivers.

  If you are still having problems try:

  • HP print driver printer - install and use the built-in Windows

  If all else fails, I create a new administrator account and try to reinstall:

  • The difficulty of a user profile is corrupted.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP ENVY Beats Audio - Subwoofer m6-1231ea does not work

  Recently purchased HP ENVY with beats audio and triple bass subwoofer m6-1231ea

  But how to get the subwoofer to work? By pressing fn + b does nothing...

  Hello @Gurtais,

  I read your post about how you try to get the subwoofer on your laptop for work, and I'd be happy to help you in this case!

  Because the subwoofer is an automatic feature of your sound system, I recommend reinstalling the drivers software and hardware original that came with your system. This can be done by following the steps described in this document on the use of the Recovery Manager to restore the software and drivers (Windows 8). Once installed, please update the drivers by Using HP Support Assistant (Windows 8).

  If you are still not able to use the subwoofer after update the software, I recommend to return your system to a previous restore point to where the subwoofer was working. To do this, please follow this document on using Microsoft System Restore (Windows 8).

  Should the subwoofer still not work with the rest of the sound system, I suggest you perform a backup and restore of your operating system. This can be done by following this resource on the backup of files (Windows 8), and more to perform a recovery of the HP (Windows 8) system. This should help get your system back to factory settings.

  If the problem persists, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• HP ENVY 14 Notebook SPECTRUM: USB 3 does not

  Hello

  HP Envy laptop

  Product number: A7U17UA #ABC

  Win 7 Pro (64-bit) SP1

  BIOS: F.06

  When I plug a USB 3.0 device on my USB 3.0 port I get a BSOD every time.

  I tried the hubs, external HARD disk (self powered and powered versions of bus) and get the same result every time.

  These 3.0 devices work with other computers.

  I removed all the USB drivers using the Device Manager and rebooted.

  Windows reinstalled the drivers.

  No luck, same problem

  Do I need special drivers for this?

  Please let know us if there is a solution.

  Thank you

  Hi @jbehara,

  Thank you for your update.

  HP has been informed of the situation and is working to correct.

  If you do not want to wait for the driver page is available to check, please contact HP support for assistance.

  Contact HP to Contact HP Support assistance

  Good luck!

• ENVY dv7-7201sa Finger Print Reader does not work

  The fingerprint reader has stopped working. Before, I thought I had genuine driver installed, now there is driver driver. Not sure how it happened.

  I uninstalled the driver drivers and pass SImple, but the single pass software download link is no longer available, what are the correct drivers, and where are they

  Thank you

  Tony,

  If you tell the AuthenTec link for the 6.0.100.620 old version of HP SimplePass, it is probably closed.  AuthenTec has been picked up by Apple last year, and they are «not more»  The drivers are still in the area - the name depends on the original software / driver source code.

  For Windows 8:

  Your valid driver - download and install not yet:

  sp58900 validity sensor V4.4.234.0 Win8

  Reference: ENVY HP dv7-7201sa Notebook PC drivers

  Instructions for installing the driver and HP SimplePass later that works on Windows 7 or Windows 8 are in the following file.

  Find, open, and follow the procedure described in the file named: simple instructions for upgrade HP SimplePass