First does not load effects Panel

Similar Questions

• After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.

  After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.
  Mac OS X 10.7.1
  Firefox 6.0.2
  Flash 10.3.183.7

  The current versions of Firefox are 64-bit on OS X, if you need a 64-bit version of Flash with Firefox 6.0.x or you must start Firefox as a 32-bit application to be able to use a 32-bit version of a plugin.

  1. Closing of Firefox
  2. Launch the Finder and open the Applications folder
  3. Make a right click or Ctrl-click the icon of Firefox.app
  4. Select "Get Info."
  5. Select or deselect the option "open in 32-bit mode".
  6. Close window "Firefox Info"
  7. Restart Firefox

• Safari does not load pages first

  Hello

  I have a MacBook Pro Mid 2010, with El Capitan, Safari 9.0.2. There is problem of loading web pages. Sometimes Safari load Facebook, YouTube or this community of support immediately. But very often it does not load for the first time, I have to open new tab and try again, then new tab and try again and maybe the fourth fifth time charges. Or it load the web page after a long time.

  The loading bar stops right in the Middle, or I get the message that something is wrong and page cannot be loaded. This also happens when I type something into the address bar and try google the keyword. It is not just probably load in 5 of the 10 cases. It's really frustrating, because Firefox just load the web pages without any problems. On my iPad and iPhone Safari works perfectly smooth. I do not plug-ins except Adblock.

  I do not plug-ins except Adblock.

  Please, disable it and see if there is an improvement.

• computer/control panel does not load in windows 7

  Hello

  I had this problem and have sought for a while again, unsuccessfully, trying to open the computer, it's green bar slowing down the loading, but once completed no content will show in the computer at the same time control panel does not load.  This problem will not occur all the time. and if I close the window and reopen it. He came back to normal, did a sfc according to other threads have disabled the network discovery.  past again, Please HELP?

  CONCERNING
  LEE

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  also:

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  If the problem persists, I suggest that you scan your computer for malicious programs:

  There are some that will hide your files/folders so that you don't normally see them. I strongly suggest to run a scan on your computer with your antivirus/antimalware software. If you need to, you can also use the Microsoft Safety Scanner, it's free:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also, if your files are hidden, check out the following article on how to display the:

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

• I tried to buy adobe first pro, but the payment information page does not load

  tried to buy adobe first pro but the payment information page does not load, I left open for a while, given market and nothing.  Anyone else having this problem?

  [transferred to The Adobe Creative cloud of mod]

  Hello

  Please try to change the browser, or clear the cache, and then try again.

  Kind regards

  Shelly

• My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Recovery DVD does not load

  Hi guys,.

  I use a HP Pavilion A6120N Vista. It has a SATA RAID 0 HD value.  Machine will not start. After ordering the HP Recovery Disk Set, I tried to run the program of recovery.  It displays a message that "Windows loading files...". ». When the progress bar is completed, I get a small bar (2 1/2 inch long) with a few lines on this subject moving from left to right.  Below I have the symbol of copyright and Microsoft Corporation.  But it makes no further along than that.  I put the devices to boot from first and second for the dvd player.  I tried to start with each of them the three DVDs.  I tried to start with disk 1, 30 minute wait and the withdrawal of disc 1 / insert disk two.  I tried booting with the UBCD and another bootable cd and then insert disc 1.  I tried to start with the two disc and pressing F11 I got "Disk Boot Failure, Insert System Disk and press Enter". When I replace it with two disc, I get the same results as above.  Nothing works. If anyone has any ideas, I'm open for them.

  After trying on & more, I got another result.  Without the disc in the drive, if I do not press F11 at startup, I get a choice of starting recovery or start windows normally.  These two choices lead to the small bar mentioned above with the lines moving from left to right. If I press F11, it goes straight to "Windows loading files...". "and the little bar with lines.  I chatted with HP support and they said the 800 number.  They told me that the OS is corrupted which causes the restore disc does not load.  Now, I thought that starting a CD/DVD without going through the operating system.  What's in Vista?  Can he change?  I saw as a warning to the other cd/dvd drive (dvd - rw 16 x pbds dh-16a1L) requires an update of the firmware to recognize the HP recovery discs.  I have the drive HL-DT-STdvdrrw.  Could it have the same problem and it had not just been documented?  So far, I am at a total loss.

  Thank you

  Message edited by TennBlues on 30/12/2008 21:58
  Message edited by TennBlues on 12/31/2008 12:03 AM

  AFAIK boot failure disk means one or both of the drives went bad or BIOS (F10) must be set to zero by default. So if the raid 0 Setup and a defective hard driveis then you need to get out that the hd and run recovery on the drive to work or wait until you get to another replaced.

  No, you do NOT have a corruption of the operating system, and Yes, the recovery disc bypasses the operating system on the drive. Windows Vista disk hard is not effect or prevent recovery disks because the disks will always wipe clean first the drive working.

  Try the following steps.

  (1) reboot the pc and go into F10 for installation (for vista)

  On the MAIN tab, check to make sure that your hard drives are both recognized where says 1st or 2nd disk, etc.

  It should look like WDC, SAMSUNG, ST... etc.

  (a) if it is not in the list, then check the SATA cable and power cables inside your computer to make sure it is plugged both ends properly and reconnect the cables to the two discs.

  (b) if only 1 disk is listed, then the other one may went bad on you and I would be the wrong drive breaker go back into the BIOS F10 menu and check that the right drive appears under you devices.

  I would then run a recovery disk of 1 until you replace it. In this case you will not have a raid 0 configuration more since she was only 1 player used.

  (2) try also reset the BIOS default settings by going to the menu of the BIOS F10 at startup and press F5, then press Yes then enter then F10, then Yes, then enter to restore the default BIOS settings.

  (3) after the reboot back to the BIOS menu and go right on the Startup tab and choose boot DEVICE PRIORITY and set the 1st boot device to the Group of HARD drive, then save the changes and exit the BIOS.

  If you want that you set the CDROM boot first yo group.

  You can also turn on the pc and press ESC to boot from the hard drive or a disk drive group.

  I recommend first resetting the default BIOS settings and check the devices first, before opening the pc.

  Message edited by c0rnel on 12/31/2008 01:42

• The "rocket" does not load

  My bitch rocket does not load.

  its quite small.

  He keeps disconnect after a certain period of time.

  I tried the front and back.

  My fuse will start up and then say

  "Battery is too low

  System shutdown"

  I just got this for Christmas.

  It worked very well so far.

  Help?

  Try to do this, it worked for me

  neutron_bob wrote:

  You can try to load first, connecting in MSC mode manually.  In this way, you can start with a loaded rocket.

  1. open a Windows Explorer window by pressing [Windows] + E, or go to work.

  2. starting on the rocket POWER off, slide the switch to HOLD (orange list).  Press and hold the Center button while connected to the USB port.  You should hear the familiar sound of ba - ding the device is recognized, and it should appear on the screen.  At this point, release the button.

  This will allow the rocket load: take a look at the battery icon.  It should be strobe effect.  MSC mode connection is an easy task for the "rocket".  In this mode, it is considered a flash drive.  I suspect that the MTP mode could be your problem.

  When the "rocket" could not establish a connection, it can get distracted from the load operation.  It is better to load before work on the part of the PSG of the equation.  Once he is in charge, you can slide the HOLD switch to the center position.

  Bob

• HIS 5770 + AMD catalyst Control Center does not load.

  For Christmas, I got 2 5770 ITS graphics cards, incredibly excited when I was driving back to the college to put both and start playing games, I prepared the diskette and waited for it to load. Then I clicked on the button "Install Drivers", asking me if I want to English, I accept and click Next. He then tried to open the "Catalyst Control Center", which does not immediately and closed. This happens with all the drivers that I try to ati and sound. IM downloading the 64-bit versions of sence you know I have windows 7 professional 64 bit. idk what to do and need help on this, id like to get these working in the crossfire and let it roll.

  Thank you.

  Intel DX58SO motherboard

  Intel Core i7 920 to 2.7 ghz

  6gbs of ram ddr 3

  1 TB harddrive

  hd5770 2 current is SOUND

  I just received a response from AMD for a known issue with Catalyst Control Center and Windows 7.  You can go there.  It worked for me the first time after a lot of troubleshooting.

  How to solve the CCC is not loading/opening at initialization.

  Scenario: the user tries to open/load the CCC through different methods, but it does not load. The problem may occur without any changes to the system or a Catalyst driver update or reinstall. This is issue mainly affects Windows 7 machines.

  Cause: possible corruption of the Windows Global Assembly Cache (GAC). Usually, this requires the user to format and reinstall Windows.

  Resolution: this solution has been tested - reproduced and resolved.

  Remove all the ATI through programs and features in Control Panel using the Manager to install Catalyst (GPC). Restart the system in safe mode and follow these steps:

  -Remove all ATI C:\programs files files and the C:\programs files (x 86)

  -Go to the C:\Windows\assembly and sort by "public key token. Locate the following key token public "90ba9c70f846762e" which is

  -associated with ATI. Usually only 2 entries. Remove 2 entries. Note: entries should be deleted (right click and select uninstall) since regular safe mode

  -mode may cause a permissions error. 2 entries appear only in the systems concerned by this issue. This means that you want the 2 inputs on systems where the CCC charges, the entries do not exist.

  -Close and restart normally.

  -Reinstall the ATI Catalyst package.

  I hope that you will get in working order!

• Safari for Mac OS does not load certain pages

  After upgrading to Mac OS on my Mac Mini (end of 2011), everything seems to work properly. I rebooted the Mini just to be on the safe side. Everything went well. It was Tuesday night.

  Thursday morning, the first opportunity, I get to mess with it, I opened Safari, try to connect to my router Asus RT-N66U (with the latest firmware), but somehow Safari doesn't seem to like https, nor does it like .asp pages. Here is a screenshot of what's on my Mac Mini Safari:

  

  I then decided to download Google Chrome. I installed (never had on this Mac Mini), but the page works perfectly and quickly.

  I have reset everything I could on Safari, including clear them cache, clear history, tried the developer mode (no matter WHICH mode in there still gives the same results)... on the cable connections and wireless. Chrome works without a hitch, as Safari before Tuesday. Now, nothing...

  ... However some pages such as Google.com or Apple.com loading properly. I haven't checked if there are applets missing in the back or a dark rendering problem.

  Any ideas how to solve this problem? (I'll use Chrome until it is.)

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

• Since Apple ridiculously decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC and click the circle of friends so he could load, MORE I wonder constantly if I want to use my game stored loc

  Since Apple decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC icon and tap the circle of friends so he could load several times, MORE we continue to request if I want to use my game stored locally or my stored GC game. I refuse to install iOS 10, because it means of course I won't be able to manually load the tab my friends and my losing my game completely. How can I fix it? Remove the Center game is the worst thing that Apple could have done, in my humble OPINION.

  You will not lose your game entirely. I have several games of game Center, and they work fine. And I understand the developer of a game that this game center continues to store the backup of your game.

  It's just that now friending is handled via the interface of the game. The only options that you have in iOS10 is to go to the settings panel in / log out of game center or remove all friends. And none of the games I play has updated so I can see how their friending works with iOS10.

  Beyond providing the basic interface, Apple seems to have turned all aspects of the social game on the games themselves.

  If you want to make Apple know how you feel, you can leave your comments via this form

  http://www.Apple.com/feedback/

• My firefox does not load and I tried everything. What should I do?

  Hi, here's the problem somehow an hour ago my firefox just stopped working, it does not load any page, all I have is a blank page and the signal that firefox loads, no errors, no nothing. I tried the steps detailed here:

  https://support.Mozilla.org/en-us/KB/Firefox-cant-load-websites-other-browsers-can

  Did not work.

  Also, I thought first of all a problem of the internet, because the pages worked very well a momment and the other nothing worked, I called call support my Internet access provider and we did an uninstall of root of firefox, that didn't work either, we also checked the ports to Skype to see if the traffic was slowing down Firefox , but this isn't that.

  Can you help me?

  Thank you!

  It was very good work. Play well.
  Please report your last post as solved while others will know.

• Firefox does not load with a certain wifi

  So I have this problem, Firefox does not load when I connect with a wifi but when I change my connection to different wifi, that's going to walk again.
  even if the first wifi works fine on my computer because I can connect to the internet with another browser.

  Many programs can "phone home" for the updates and such.
  These work yet?

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select network.
  Search for configure how Firefox connects and then press the settings button.
  If you use a proxy server, make sure that these settings are correct. If there is no
  proxy, first use No. Proxy. If there is a problem, then try Proxy system.

  Some problems occurs when your Internet security program has been implemented.
  trust the previous version of Firefox, but not more acknowledges your
  update as being approved. Now how do I solve the problem: to allow
  Firefox to connect to the Internet

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version).
  • Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see

  Configure the firewall so that Firefox can access the Internet. {web link}

• Firefox does not load.

  Firefox does not load. I have installed Kaspersky Internet Security and everything was working fine until it wasn't. I then uninstalled Kaspersky, but Firefox still load.

  Since I love Firefox I restored my computer to an earlier state and that fixed everything, then I installed another Kaspersky product and everything was perfect. Now the problem is back.

  I don't know if the problem is on the side of Kaspersky or Firefox, but I would prefer not to restore again and I have no more troubleshooting ideas.

  Firefox starts in safe mode of Windows.
  When I double click on the Firefox icon the mouse indicates the load of the FF, but then, it does not start. Chrome starts very well.
  Contacted Kaspersky, but their first troubleshooting tip didn't work.
  Under Event Viewer, I can see the details of the accident for Firefox, but I can't read and I do not know if they are related to the FF does not.

  I'm agree with unintelligible Firefox and then put it back, but I don't want to lose my bookmarks, modules, themes, etc.

  Any ideas would be appreciated!

  You can start Firefox in its own Mode safe? Hold SHIFT and start Firefox: https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_how-to-start-firefox-in-safe-mode. You could at least make backups of Mode without failure. I heard wrong with anti-banner Kaspersky features, if you can try to disable browser protection components in Kaspersky to see if he can coexist with Firefox on your system or not.

  If you need to back up things without starting Firefox, go to your profile folder http://kb.mozillazine.org/Profile_folder_-_Firefox#Windowsand copy. It must contain everything down to your history of bookmark backups and extension settings.

• I have a MacBook Pro 13 inch early 2015 and when I connect to the power supply the connected is loose and my Mac does not load. Please help me

  MMacBook does not load

  Looks like you have is connected wrong charger (you have an older Mac in the House?) or the charger has been damaged. Perhaps the magnetic head is damaged.

  You have another mac or a friend with a mac that has the same charger if you can try that?

  You can certainly buy replacement chargers, but I recommend that ensure you it is the charger that is the first problem to avoid spending money. If this is a problem with the port on the Mac, then a replacement charger will not help.

  If you don't have a 2nd charger to test, you can take your Mac at the Apple Store or your local electronics store that sells Macs and ask to try the plug one of their display models.