First Elements 11 - I have a problem with pinning of the video clips in the timeline.

Hello

I have a new Prime Minister 11 elements.  I'm working on a video with a narration track project.  Because I have to build animations in photoshop that go with the narration, I'm not editing in a way liner.  When I insert clips earlier on the timeline animations, it tends to move the clips of animation to the top or to the bottom of the timeline and sometimes he's trying to cut my narration.  Is it possible to pin the animations to a specific timecode on the timeline, which then will allow me to insert the live action clips inbetween with out having to sycn are ' animation to the narrative.  In older versions of the first I used years ago (and FCP), it's the titles of easy locking.  I know that you cannot lock a track in PE11, but is it possible to pin the video to the narrative?

I too if I have to 'resync' animations to the narrative is there a way to select the entire animation (which is located on several tracks) to return it to its place compared to the narrative?

Thank you.

Unfortunately, pre has never added the ability to lock a track (something that PrPro and something that I and many others, have asked), so a change in workflow could be the best.

For what you describe, I would just edit video 1 and Audio 1 (or according to the following you use), and then add your animations on 2 video tracks (or any video track above your edited Clips). All that is on a video track higher, it will be seen, regardless of which is lower than that, except if we adjust the opacity (to see through the Clip on the video track above), or they "drill holes" in this upper Clip, say with Track Matte Keying, or via a channel Alpha, or the Garbage Matte.

Your animation will be seen and your Clips edited, weaker will not be made, other than that they are not visible.

Another method would be to make an Insert Edit where your animation replaces a corresponding number of images in the Clip to which you drag, on the same video track. Just hold down the CTRL (Cmd on Mac key) and drag your animation to the place you want to so he can be at the Top of the clip here. Their mounts will be replaced by your animation.

A third, if you want full "lock" video and Audio, would be to export/Share/publication chronology of the project, and then import the output file (it will no longer Clips, but will be a long Clip), then add animations, or whatever, by using one of the two methods above.

Good luck

Hunt

Tags: Premiere

Similar Questions

  • Hi, I have a problem with threats in the temp folder

    Hello
    I have a problem... Apparently, about 26 files in the windows/temp folder are infected. All files names begin with game, for example set625D.tmp and my antivirus program wants me to remove (on average). The problem is that I'm not sure if I have to remove, more exactly if my computer works perfectly if I delete them. Should I remove them, or look for an alternative? BTW, I have Vista...

    Friday, February 1, 2013 16:41:14 + 0000, Marie-Claude wrote:

    Hello
    I have a problem... Apparently, about 26 files in the windows/temp folder are infected. All files names begin with game, for example set625D.tmp and my antivirus program wants me to remove (on average). The problem is that I'm not sure if I have to remove, more exactly if my computer works perfectly if I delete them. Should I remove them, or look for an alternative? BTW, I have Vista...

    You can delete all the files in the folder temp without problem, unless
    they are used. If they are in use, Windows won't let you delete
    them.

    However, if they are part of a virus, AVG may be able to remove them.

  • I have a problem with programs on the computer of fence on switching between users.

    Original title: program quits when I switch users.

    Hello. I have a program installed on all my win7 Pc users. The program should work 24/7 and the problen is, thet when I switch users the program stops working. I do not logoff, just put in user. What should I do to make it to work all the time?

    This is probably the way the program was written: to run only in an active session of foreground. Have you checked with its authors?

  • I have a problem with access to the computer after forgetting the password.

    Original title: I forgot my password to connect you now I can not access anything that has to with the hard disk drive please help... Computer is going to crash

    My laptop monitor is broken, so I stopped using it... haven't used in awhile... now I'm using again and not the password journal-gin admins that I remember... I tried everything... it of not that big of a deal... the biggest problem is that whenever I try to do something that has to do with the hard drive including anything, including updates or access to anything or change all the settings download, he asks for the admin password... My computer will cause crash soon I can't save anything without the password. Help, please!? WHAT SHOULD I DO?

    [Moved from comments]

    Hello

    "What to do if you forget your Windows password"

    http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

    "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

    Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

    Here's information from Microsoft, explaining that the policy:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

    See you soon.

  • I have a problem with Autoruns on the computer.

    Original title: Autorun problems

    I wonder if anyone can help. I have Windows 7 64-bit edition.

    Unfortunately I bought antivirus Bitdefender a few months previously. He tried an 'autorun Media"and recommended to turn off, that I allowed him to do. I then fed up as it stopped all the DVDs and USB keys from popping up automatically. But... and this is! There is no way in Bitdefender to reverse this trend. I emailed and received many unnecessary responses, which did not work. The same was told to download and run this file:

    http://www.sevenforums.com/attachments/tutorials/200584d1330364432-autoplay-enable-disable-enable_autoplay.regBut nothing changed. I finally found a solution, surfing the internet. There were strings in my registry called something like nomediaautorun or similar, and I deleted them. Now USB sticks and DVDs pop up with a choice of options again.

However, the automatic content of the DVDs does not load! In other words, if I put a game DVD in the computer, I don't get the automatic screen with the "install" etc options... I'm really fed up. I've looked around everywhere and can't find a solution. Can anyone help please???

Thanks.

    Hello Ulrich,

    As the problem persists after performing all the troubleshooting steps, it could be because the system of corruption files. To retrieve or replace these files, we will perform repair installation of Windows 7 that will not affect your personal files and settings. But, it will replace the missing or corrupted operating system files.

    You can check the link:

    http://support.Microsoft.com/kb/2255099/en-us

    Warning: On-site upgrade device: before performing an upgrade on the spot, you should be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

    Please let us know if you have more queries on Windows.

  • I have a problem with printing on the HP Deskjet 5740.

    Original title: impression of the printer

    I just had a new office of HP (HP 6200 Pro) running Windows 7 Pro and have an old HP's Deskjet 5740 I can't print.  When I followed the link to install the driver, I get this message, "the drivers for your HP product are already included in the new Windows 7 operating system! You don't need to download the drivers to use the product . Simply connect the printer to your computer with a USB cable, and Windows Update automatically installs the driver for your product. »

    Hi Marc,

    I suggest you try the procedure described in the article and see if it helps.

    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Check out the link for more information.

    Install a printer

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • I have a problem with access to the C drive.

    Original title: lost access to the C: drive...

    When I was a noob after installing a new HARD drive, I have written an autorun.inf file to my C: drive to make it look cool (you know, give it a cool name, and change the icon). I was not allowed to save .inf in the root files, so I decided to open the properties and tinkering with security... when I turned on my computer later, I now do not have access to the c drive, and cannot do anything administrative (including rear safety switching)

    Please, please help!

    Hello

    Method 1:

    You can enable integrated admin and restore the system.

    Step 1:

    To activate the built-in Administrator account, follow these steps:

    a.Click theStart button, then type cmd in the Search box.
    In the list of research results, right click on cmdand then click run as administrator.

    b.At the command prompt, typenet user administrator / Active: Yesand then press ENTER.

    net user administrator , c.Type and then press ENTER.
    Note: Please replace the tag with passwords which you want to set for the administrator account.

    Type exitand press ENTER. Disconnect from the current user account.

    Step 2:

    System restore

    http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

    Method 2:

    If the problem persists, perform a repair installation (upgrade on the spot).

    Check out the following link to do the same thing:
    http://support.Microsoft.com/kb/2255099

    Note:
    You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

    Reference:

    Back up your files

    http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

    It will be useful.

  • I have a problem with access to the previous page.

    Original title: confused in Alberta

    I know few things about my computer regarding terminology, etc. that I use only for info and email.  I have an Acer Aspire and run Windows 7.  For a while now, I was able to go to the previous screen with the arrow at the top left.  Any suggestions because it is only a disadvantage compared to several other questions that plague me now.  Thank you for taking the time to read this.

    Hi David!

    In Windows Explorer: you have folder options set to open in a new window? If so change to open in the same window (from the Explorer > tools > folder options)!

    Concerning
    Julia

  • I have a problem with any of the applications on the computer.

    I just bought a new HP laptop in December and it came with windows 8 is already installed and working fine until a day ago. None of the apps will launch when you click on it, it just throws me back to the start menu with all the tiles. I tried all that I found with still no luck on fixing the problem so if you know what whether that will fix it that would be great! I mean absolutely no applications work very please tell me not reinstall because the windows store still doesn't work...

    Check below link
    http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  • I have a problem with access to the content windows install.

    When you try to install a downloaded Update (Mr. Fix - it of the current version of MS and ATT Communication Manager) windows install stops before finishing and gives an error meesage. I had some instructions on the BITS. Reg, but don't know what to do or where he is. HELP cannot use mt no tethering, no wifi at home aand sick of sitting in Starbucks coffee shops trying to solve this problem.

    Hello

    1. What is the exact error message you get?

    I suggest that you follow these steps and check if the problem persists.

    Step 1:

    Make sure that the Windows Installer service is running:

    The Windows Installer service can be disabled on the computer.  
     
    a. go to "Start "-> "run ", type "services.msc " and press the "Enter " key.
     
    b. double-click on the service named "Windows Installer ".
     
    c. check the value the "start type: " field. Is currently set to "Disabled ", then that's the problem. Change it by selecting 'Manual ' in the menu dropdown.

    Step 2:

    Follow all the steps in this article to resolve the problem.

    Problems installing and uninstalling programs on Windows computers

  • I have a problem with access to the bitlocker key.

    Original title: my surface said rt I need bitlocker recovery key, but my information was not correct on said account have wait until March to access my email account and get the key?

    Basically, my phone number was incorrect, so I had the chane it now I can't access my recoverykey skydrive until 25 March, what am I supposed to do? as I can not access my surface?

    What happens if you following this link:

    For your recovery key, go to BitLocker recovery keys.

    ( http://go.microsoft.com/fwlink/?LinkId=237614 )

    This should send the recovery key for the mobile phone to the folder number.

    I found this link on this page of the FAQ Bitlocker recovery key:

    http://Windows.Microsoft.com/en-us/Windows-8/BitLocker-recovery-keys-FAQ

    If this does not help, you may need to contact support Surface.

    Kate

  • Spectrum of HP x 360-13-4165nr: problem with pin on the splash screen for HP spectrum x 360-13-4165nr

    I'm completely locked out of my computer. When I put the pin code 4 digit, the display shows "the system has been locked for security reasons. Connect to the power supply for at least two hours then restart to try again. "The password is coming as incorrect as well. Please help, thanks.

    If you use a local account, then reset a Microsoft account will not do anything.

    I don't know what happened in this situation to happen.

    But you have two options at this point.

    You can reinstall Windows 10 or you can contact the HP Support (assuming you are still under warranty).

    Contact HP worldwide | HP® official site

    Did you create the Factory Reset Media you had when you bought the computer first?

    Who will be the best way to reset the computer.

    If you do not, click the link below to see the other options to perform a factory reset for your model.

    HP computers - perform a recovery of the system (Windows 10) HP | HP® customer support

    You may need to go to the bottom of the page and read about recovering when Windows does not start successfully.

    NOTE: You will need to reinstall all of the third-party programs that you have installed previously and you will lose data that never are currently on record, unless you saved it.

    Let me know if you have any other questions.

  • Problem with accessing dynamically created video clips, returns null.

    I hope that it's a dumb question with an easy answer, if my code is pretty simple.

    I use this code snippet to create menu items, then use the variable jCount below to give the clips a like number, index in so much of (which seems to work very well):

    for(var j:Number=0;j<xmlSubMenuLength;j++){  
    var mcSubMenuItem:mcSubMenu=new mcSubMenu();    
    addChild(mcSubMenuItem);     
    jCount++;    
    mcSubMenuItem.name = "mcSubMenuItem" + jCount; 
    //traces out names correctly
    trace ("---------------------------------jCount NAME = "+ mcSubMenuItem.name); 
    mcSubMenuItem.x=mcMenuHolder.x+20;
    mcSubMenuItem.y =mcMenuHolder.y;
    mcSubMenuItem.y+= nextBtnY;
    nextBtnY+=subtopicSpace;
    global_subi.text = String(jCount); //i see the proper count of 10 in the text field
   }
   
  

    However, when I try to access the clips using this snippet:

      
 for(var j:Number=0;j<Number(global_subi.text);j++)//
    {   
  trace("GLOBAL SUBI = "+ String(global_subi.text));  //traces out 10, which it should
  var scSubMenuItem:String = "mcSubMenuItem" + j;   
  var scSubContent:Object = this.getChildByName(scSubMenuItem); 
  trace(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>scSubContent:Object = "+ scSubContent); //returns null!
  
 }  

    My last trace statement returns null. Anyone can see my mistake, or explain why I can't access my videos after they have been created?

    Thanks muchly,.

    ~ Chipleh

    You are welcome.

  • I have a problem with apple ID signin?

    I have a problem with sign - in the apple ID and the device says you must answer security question or send other messages and I don't remember this e-mail and security question and I have urgent emails so please I want to quickly solve this problem (urgent please).

    There is a contact link.

    Apple ID support

    Apple ID support (2)

  • Problem with youtube and other video sites

    I have a problem with youtube and other video sites:

    Everything is up-to-date (flash, FF, my plug ins.) but I get crashes when loading the video. I can hear the sound but I see only the first frame of the video.

    I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.

    I hope someone can help, I looked for answers on google before and I tried everything I saw, but it did not help.

    GRTS,
    agrash

    I had the same problem, I uninstalled the plugin Flash player (Adobe Flash Player 11.0.1 152) and the problem is solved. I installed the plug-in again and the problem came back. So right now I have no flas Player liked-in, but I don't have too much problem. I hope that I will not find another problem, but it seems that everything is OK.

Maybe you are looking for