Problems with 9000 device establishing a socket connection?

Similar Questions

• Help: problem with playback device

  Hello

  My dell latitude e7240

  and my headset logitech g150

  does not connect it says: problem with playback device

  It calls for 1 second then ends

  and when my friends try to call the said

  contact can only receive instant messages

  Help, please

  and fast

  Thank you very much

  I did a diagnostic test and other results are here

  https://www.dropbox.com/s/ipvyg52xhfwjrly/Dxdiag.txt?DL=0

  and Skype is the last

  Thank you

  answer soon

  Morgan

  Topic/title edited for clarity.

  Still no trace of your helmet and Avnex Virtual Audio Device is always installed.

  The specified Audio Capture Source only is Avnex Virtual Audio Device

  audio Capture Sources :

  Microphone (Avnex Virtual Audio Device), 0 x 00200000, 0, 0, qcap.dll, 6.06.9600.16384

  Open the Windows Device Manager. Are there looking for this virtual audio capture device, then uninstall it.

• Problem with recording devices and call issues

  Until recently I had a few problems with my microphone on Skype. Whenever I start my PC, everything will be fine, but every time I change the microphone source (from my webcam for stereo mix so I can play sounds in calls) and leave the call, I get weird questions. First if I still have the stereo mix as the source micro fine, but if I change it to my micro webcam when I click on answer call nothing happens and if I call someone it won't fail to connect and it will say: problem with the device registration, which is strange because it has nothing to do with the connection. Also if I change the source to microphone during a call, the call will be disconnected as if I turned on the internet and post something about the sound card errors. Can anyone help?

  I found the problem, clown fish was not working with Skype and it ceased to use the microphone and I thought since I had removed so I don't think that was the problem, but for some reason any, it is been installed, in any case I removed it and now Skype works fine.

• Big problems with USB devices

  Since I upgraded to El Capitan I have several, serious problems with USB devices:

  1 USB hard drive: everything by watching a video from an external hard drive, the hard drive will be to disassemble all the minutes, the video will be of course hang and it takes 45-60 seconds until the drive reconnects. I also can not boot from any external hard drive more. Booting from a USB key works fine.

  2. I can't transfer my Sunny BT11 of beam data more. The Sunny Beam is a device that records the data of my photovoltaic plant. The overview of the system he sees when connected via USB, however he is not recognized and so I can't transfer data files. Also, it makes not a difference if it is connected via a USB hub or directly, the two versions do NOT work. In the Finder preferences, all devices are controlled to display on the desktop.

  The two scenarios always perfectly work with my Mac mini that has not been updated and uses Mac OS X 10.10.

  Hello Gulliver,

  It seems that if you live with loss of connection of your USB devices since the installation of Mac OS X 10.11 El Capitan, is that correct?

  I suggest that you are troubleshooting by following the steps in this article - OS X El Capitan: If a USB device does not work

  Thank you for using communities of Apple Support.

  Sincerely.

• I have problem with wifi iphone 6 s not connected...

  I have problem with iphone 6s more wifi not connected...

  I'm having the same problem and tried all the fixes I found online and nothing has worked so far.

• Problem with playback device?

  Video call in progress version 7.2.59.103 3 days ago made in New Zealand was in line for 40mins no problem what ever. as soon as I ended up call message problem with playback device. and as soon as I use either call or video call immediately, the page returns to the home page and does not appeal. checked devices audio all working correctly, no update of windows for the last 3 weeks. using Skype on my asus laptop 5 years on widows 7

  Hello, do not know what I did but trhe message has diasppeared, and the test call also works OK now.

• I can't call anyone on Skype, he said only: "problem with recording device" help?

  Could someone help me? my lack of Skype let me call anyone, when I try to call or answer a call it comes a message saying "problem with recording device"-does anyone know how to fix this help please!

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=no&cc=no&DLC=no&sw_lang=&product=7264...

  You can install this "driver - Lyd" (Realtek High-definition-lyddriver (HD))

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135685-1&CC=no&DLC=no&LC=No... =

• "the problem with playback device" with Skype.

  receive 'problem with playback device' with Skype.  When I go to the Control Panel on my pc dell under sounds, etc., there is no option of reading before it takes.  have spent hours on Skype and my pc. Help!

  Hi BeverlyBowers,

  Facing any problem with the sound on the computer other than on Skype?

  Problem with playback device means that Skype cannot find a speaker or a headset that is properly configured on your machine in order to make a call.

  Method 1:
  I suggest you to run the Fixit and check if it helps.

  Automatically diagnose and fix the audio problems and Skype webcam
  http://support.Microsoft.com/mats/Skype/

  Method 2:
  If the problem persists, I suggest that you make sure that speaker or headphones are selected by default.

  a. go to Start and click on Control Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the tab "recording" and right click in the window and click Show disabled devices.
  d. now check if the speaker or headset is listed here and right click above and choose Activate.
  e. highlight the speaker or headphones and click on 'Set as default'.

  Method 3:
  If the problem persists, I suggest you install the latest audio drivers on the manufacturer's Web site and check if it helps.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• problem with the drivers for the card microsoft virtual wifi miniport... problems with PnP devices

  He said to reinstall the drivers for this problem, but they don't reinstall... also he says hardware changes have been detected... can someone explain in easy to understand words what the problem is and how to fix it... pleaseeeeee... Thank you... The convenience store said: THERE IS A PROBLEM WITH THE DRIVER of MICROSOFT VIRTUAL WIFI MINIPORT ADAPTER... DRIVERS MUST BE REINSTALLED... it won't reinstall... also: PROBLEM WITH PnP DEVICES HARDWARE CHANGES HAVE BEEN DETECTED? CAN SOMEONE HELP ME UNDERSTAND, IN EASY WORDS, EXACTLY WHAT I NEED TO DO TO FIX THIS... CD-ROM... IM USING A SAMSUNG LAPTOP MODEL NPR 519 RUNNING WINDOWS 7... Thank you... Update on the microsoft Web site says: this DEVICE no IS NOT WORKING PROPERLY BECAUSE WINDOWS cannot LOAD THE DRIVERS REQUIRED for THIS DEVICE (code 31)... im not computer savvy please someone help

  Hi MAGIC,

  It seems that you may need to update your BIOS firmware.

  You may need to contact Samsung for more information, if the update is available for download on their Web site.

  When started this issue is happening?

  You can disable the virtual WiFi adapter, as it essentially works as a tool of development at the moment:

  http://msdn.Microsoft.com/en-us/library/dd815243%28VS.85%29.aspx

  What is the device that has the problem?

  Reinstall the drivers to fix the problem?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Skype usage error: problem with playback device

  Original title: Skype.

  I'm calling by Skype and it is written that I have a problem with "currency of reading".

  What should I do?

  Hello

  ·         Audio devices work otherwise?

  Problem with playback device means that Skype cannot find a speaker or a headset that is properly configured on your machine in order to make a call.

  Step 1: Launch the audio troubleshooter. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Also refer to the support of Skype.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Re: Satellite C650 - problem with the devices connected to USB ports

  Hello

  Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

  The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

  The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
  Thanks in advance

  Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

  Post edited by: leahhw123

  Hello

  What happens with plug n play like USB mouse device?
  You are able to use an external USB mouse correctly?

  > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
  I guess this could be a problem with the software or drivers installed.

  I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

  In addition, you can try to install this software once more, check whether this USB problem appears again.

• NETGEAR D7000 - Mode Access Point - connection problems with iOS Devices

  Hello

  Having a problem with my Netgear D7000 in mode access point.

  My laptop (MacBook Pro) can successfully connect to WiFi and my PC connects fine cable using the D7000 as a switch.

  iOS devices, however, hurt that is to get or maintain a connection - even if they connect to and then some time later they will fall the network. Go to settings shows the client attempts to connect, but seems to be stuck with an assigned random IP (not on the subnet of law), no gateway by default, etc..

  iOS clients are an iPad 3, iPhone 5 & iPhone 5 c. All about the latest version of iOS.

  Other access points by train (Belkin, billion) that's fine.

  DHCP etc. everything is managed by my router which is a constant for all devices and access points - but I tried to change that, and he has not made a difference also.

  D7000 is on the latest firmware (v28), I tried to reset it and setting up from scratch, but no joy.

  Any ideas?

  Change the channel seems to resolved this problem.

• x201i problem with adding devices and connecting with them via Bluetooth

  I have a new computer x201i laptop Windows 7, Bluetooth is installed and running, the icon is on but I can't communicate with external devices like mobile phones. The system concludes that they are, but does not allow the exchange of files. I get the error message could not connect with the device, or did not find the right driver for the external device. I reinstalled the driver from Lenovo support page, no result any ideas? Help, please...

  Try to install nokia ovi suite. You can find it here: http://europe.nokia.com/support/download-software/nokia-ovi-suite/compatibility-and-download

  Normally, it will install the drivers you need.

  Hope that helps...

• Establishing a socket connection between a .swf file and a current-test program (TCP/IP generator - Windows), in AS3.

  I have a problem with a college project, I'm trying.

  Using Actionscript 3, I did a program simple .swf, a smiley face, lively and interactive, which "reacts" number entered in an input box.

  For purposes of this project, I now do the framework for establishing a connection socket with the smiley .swf and another program.

  That's where I run into problems. I have very little knowledge of the AS3 programming, so I'm not sure how the connection - what is required for it, it is.

  To test the connection, I try to use the "TCP/IP builder" program for windows, which allows me to set up a server socket. I need to program the .swf file into a client - to recognize, connect to it, then be able to receive data (so that data then allows for the smiley "react" him--like how he does now with the input-box, 'automatically' as it gets the data, rather than by manual input).

  My attempts at codification it are as follows, with the help of a tutorial (link HERE):

  INSERT HERE THE SOCKET STUFF

  //****************************************************************

  var socket:XMLSocket;

  Stadium. addEventListener () MouseEvent. ( CLICK, doConnect ();

  It connects to the local port, 9001 and applies event listeners

  ( function doConnect ()evt:MouseEvent():void

  {

  Stadium. removeEventListener () MouseEvent. ( CLICK, doConnect ();

  socket = new XMLSocket()'127.0.0.1', 9001);

  outlet. addEventListener () Event. ( CONNECT, onConnect();

  outlet. addEventListener () IOErrorEvent. ( IO_ERROR, onError ();

  }

  This locates the connection (allows us to see what has happened or failed)

  function onConnect () evt:Event():void

  {

  trace ("Connected"();

  outlet. removeEventListener () Event. ( CONNECT, onConnect();

  outlet. removeEventListener () IOErrorEvent. ( IO_ERROR, onError ();

  outlet. addEventListener () DataEvent. ( DATA, onDataReceived ();

  outlet. addEventListener () Event. ( NARROW, onSocketClose ();

  Stadium. addEventListener () KeyboardEvent. ( KEY_UP, keyUp ();

  }

  ( function onError() evt:IOErrorEvent():void

  {

  trace ()"Login failed"();

  outlet. removeEventListener () Event. ( CONNECT, onConnect();

  outlet. removeEventListener () IOErrorEvent. ( IO_ERROR, onError ();

  Stadium. addEventListener () MouseEvent. ( CLICK, doConnect ();

  }

  Here, the flash titles what keyboard key.

  If you press 'q', the connection ends.

  ( function keyUp() evt:KeyboardEvent():void

  {

  if (evt. ( keyCode == 81( ) / / key for q code is 81

  {

  outlet. Send ("exit");

  }

  on the other

  {

  outlet. Send (evt. keyCode );

  }

  }

  It must manage the data that we get from the server.

  ( function onDataReceived ()evt:DataEvent():void

  {

  try {

  trace ()"Server:", evt. data );

  }

  catch (e:Error) {

  trace ('error');

  }

  }

  ( function onSocketClose ()evt:Event():void

  {

  trace ()"Closed connection"();

  Stadium. removeEventListener () KeyboardEvent. ( KEY_UP, keyUp ();

  outlet. removeEventListener () Event. ( NARROW, onSocketClose ();

  outlet. removeEventListener () DataEvent. ( DATA, onDataReceived ();

  Try to connect to the Jack gives me no result (other than a "Connection failed" message when I click the .swf) or the following error message:

  Error #2044: unhandled securityError:. text = Error #2048: security sandbox violation: file:///C|/Users/Marko/Desktop/Završni/Flash%20documents/Smiley%5FTCP%5FIP%5Fv4.swf cannot load data from 127.0.0.1:9001.
  to the Smiley_TCP_IP_v4_fla::MainTimeline/doConnect()()[. Smiley_TCP_IP_v4_fla ] [MainTimeline: frame1:12]

  127.0.0.1 could be supported through your HTTP software, I'm not familiar with the tool you are using. It could also have been show in your hosts file (in Windows you will find here: C:\Windows\System32\drivers\etc). Check to see if something is the substitution of 127.0.0.1 (local loop).

  Apart from that, I've given you source to a rapid AIR server that has just opened a listener to 127.0.0.1:8910 so you would need no other tools to test the client, even if you have a. I just include the source and a product AIR installer so you can reproduce them to see that I do anything malicious. The Server.air file must be "installed" to test it. When you double-click it, it is a Setup. He moved to C:\Program Files (x 86) \Server (should have called something less common in hindsight). It also has a checkbox to run it after installation. If you don't you will see the server pop up a standard window of 550 x 400 with a text inside the box there letting you know that it is listening. Everything connects, messages (channels) and disconnects the will displayed in the Server text box.

  The customer is the only SWF file, you must run, after 'something' listening on the IP address and port configure you with.

  Here is a picture to show you the server is not running in the same folder the SWF did, tell the server and it only run the client exactly how I should it look like all together:

  

  I'll show you that after running the Server.air Installer, here is the the path of the executable file is running from and the client SWF isn't here. No problem connecting despite being in different places.

  The server is running and says that it is listening on 8910. Feel free to modify the source and reproduce for a different IP/port.

  -J' open the Client.FLA and just run. It creates a new socket, add headphones, connects to 127.0.0.1:8910.

  -The server responds that he sees and accepts the client connection. The server sends a message "connected." (10 bytes) to the customer immediately.

  -The client receives data (String), he draws. The customer sniffs for this specific message, and then sends the server a string "thanks for the connection!

  -The server receives and is coded only to echo the string in the "Echo - thank you to connect!" back to check that the chain is correct.

  -The customer receives the echo of servers (30 bytes), he draws.

• "Problem with recording device" - with no Microphone

  In short, despite not having a mic that I usually use Skype calls to be able to listen to friends when you play and do stuff in general. However today all of a sudden when we tried it auto-a ended the call with an error 'problem with the recording device '.

  It happens both with echo and simple restart does not solve the problem either.

  Apparently, with the new codec NGC (new generation call), which is now used for all calls from Skype, it is mandatory to have a microphone connected to the computer. Without a microphone, Skype calls will not work.