First Pro CS5 has no color key?

Similar Questions

• First Pro CS5 has become corrupted

  I have 2 major projects using CS5 and the software became corrupt. If I uninstall and then reinstall the program, what happens to these projects (0ver 5000 links on 1 project)?

  Check if you have all of the presets for HDV, ACDHD sequence, RED, etc., when you try to create a new sequence. My guess is that your installation is returned to the amd evaluation mode so you must perform the following steps:

  1. disable

  2 uninstall

  3. run clean Script several times, rebooting between tracks

  4 install

  5. turn on

  6 update

• Audio does not synchronize with the video in first Pro CS5.

  I recently did a minute 50 video in Shadowplay in format mp4 1080 p and 60 fps. When I look at the video using the default player on my Windows 10 computer application, the audio and video sync very well. However, when I add in first Pro CS5 is no longer syncs. I tried to use a custom preset but who has not yet worked.

  Playback is nervous as well?  First CS5 is older than 5 years and you can be on the 32-bit version?    Also be sure to what ShadowPlay produces a constant frame rate export.   First dislikes images of frame variable rate but which usually manifests as not be able to play all the.

  Try to run your file through Handbrake and set it to constant framerate and try again first.  Is not guaranteed to solve the problem, but removes a suspect.

• NVIDIA GeForce GTX 750 first Pro CS5 compatibility

  NVIDIA GeForce GTX 750 4 GB DDR3

  I'm on the purchase of a new pc that has this pre-installed video card.

  Do you know if its compatible with First Pro CS5 and the rest of the programs in this collection:

  Still, After Effects, Photoshop, Illustrator etc. ?

  You enjoy letting me know that the new machine is not cheap and I want to make sure.

  I use Windows 7 Pro.

  Thxs.

  The CUDA Hack:

  enable CUDA?

• First Pro CS5.5 quit unexpectedly. Mac 10.10.2.

  Hey there,

  My Mac has just started popping up with the box of 'first Pro CS5.5 close unexpectedly.  Nothing has been done differently and the program works for years.  Any help?

  My Mac is a 17 2011 "and currently has OSX Yosemite 10.10.2.

  

  Problem solved.

  I couldn't find the Colorista file for some reason any. I looked at red giant through Finder (the company that manufactures the Colorista) and there was an application uninstall program they provide. In this App Uninstaller was able to uninstall the Application Colorista. After uninstalling, everything works fine.  Thanks for the help guys!

• First Pro CS5.5 installation problems

  I am a newbie to Apple systems and therefore has no chance first Pro CS5.5 installation to my new iMac desktop PC.

  I have correctly installed and used this program on my system Win7 very familiar, but move to OX10 and Apple has proved more

  that my non-technical brain can handle.  I can't find anything specifically labelled Install.app by clicking on some files with

  'Install' on the label, a box pops up saying "there is no set application to open the document.  So I would be able to work on my images,

  and I'd appreciate any help you amazing, knowledgeable, people can provide!  Thank you!

  Have you tried some documents for OSX beginners on the web?

  http://www.YouTube.com/watch?v=8gkvAt1FYps

  http://guides.MacRumors.com/Installing_Applications_in_Mac_OS_X

• Work on keyframes in copied sequence change the original sequence as well (first Pro CS5.5)

  Hello world

  Maybe it's a very basic question, but looking on the forum did not bring to the top of the related issues, so I'm going:

  Let's say I have copy a sequence in first Pro CS5.5 and paste it into the same project. I have a few textclips with keyframes in them. (I do, because the videos remain the same, I just write different things in them.) When I change the keyframes in the copied sequence, the way that I need them out there and then come back to the original clip, keyframes it changed as well. This isn't what I wanted.

  So my question is: How can I make a copy of a sequence and then work on it without changing the original at the same time? Why are they related in any way? What's a selection in my version of Premiere Pro or is it a general thing?

  Be great if someone could explain it to me.

  Thank you!

  When you open your title for editing, press the new title based on the current title in the title Editor button; It's one that looks like the film with the "T" in it. This will create a new title in the sandbox, but will not replace the current instance of the title. However, you can simply drag this copied to the instance title, hold the Opt/Alt key and drop it onto the animation instance, copied. This will replace the contents of the clip, but preserve the animation.

• How to export a lower third animation in first Pro CS5?

  I bought a lower third animation that can opened using After Effects. What I want to do, is to create different lower-thirds with different names (transparent background) and make everyone as a quicktime file to be able to just put in my first pro film when I need to be shown. The question is: how export animated lower-thirds After Effects in first Pro CS5 with a transparent background, it will show just the slightest third animation. Any response would be appreciated.

  Thank you!

  You must make the file with an alpha channel. You want to set up rendering as Millions of colors + Alpha, Alpha right and then use a codec that supports alpha channels. Depending on your system, this can be ProRez 444 QuickTime Animation, or a png sequence.

  Press F1, go to the help files and read the section on render and output.

• First Pro CS5.5 titreur crashing on start up

  I have a recent issue with the titration module. First Pro CS5.5 Titler crashes constantly when opened. I can not open past projects which includes the titration module or have titles in it. Last night I was finishing a project (of course) who has titles in it. This morning when I tried to open the project, I got the BLUE SCREEN of death. I restarted and was able to open the first pro cs5.5, but it does not display the recent previous projects. It was as if everything got zero including my preferences. I tried to open my project that has titles in first pro cs5.5 accidents and she immediately. I then try just open a blank project and all is well. While in this empty project, open the titration module causes an immediate crash.

  Now, I still have first pro cs5 on the computer so I'll and open an empty project in cs5 and everything's fine. I try to open the module of titration in cs5 and everything's fine. I try to open in my project with securities and well-functioning cs5.5 cs5. It opens and works as it should.  But of course, it's a real pain because my cs5.5 after effects sequences are not backward compatible. I reinstalled first pro cs5.5 and tried everything again (above), but met with the same results. I have the latest version of windows and Quadro 3800 NVIDIA updates. I've been editing on this system for almost a year with cs5 and 3 months with cs5.5 (production premium)

  Specifications of the computer:

  Office high i7 2.8 gHz

  Qudro 3800 with last orders

  Professional drivers latest window 7

  24 GB ram

  7terabites of hard disk space.

  .

  Thanks to Bill Hunt and his article and tread on the corrupted fonts, I was able to find a solution. In fact, it wasn't a police problem, it was one obscured 5.5. file that was bad. Bill that included in his thread. File: 'workingset.prsl' found in the mydocuments/adobe/premierepro/5.5/styles folder.

  I first moved the file out of the folder and first pro 5.5 module titration. He started very well without any problems. I was able to open my previous projects which involved that I wasn't able to open before the titration module. Regenerates the file in the folder styles. I can remove the old file prsl.

• First Pro CS5 pixelation with T2i .mov files

  Thanks for the great information!

  Here's my scenario...

  • Windows 7 64 bit family

  • Intel quad core processor

  • Nvidia Geforce Gt240 graphics card

  • 8 GB of ram

  • G - tech g-raid0 drive 2 TB (for image storage)

  • WD Caviar Green 500 GB (OS Win764bit & amp; applications)

  • WD 250 GB usb 2.0 external drive (for backup)

  • First Pro CS5 (prod prem) modded to enable nvidia gt240 graphics card be used with the Mercury playback engine

  Backstory:

  I shot a short film of 2 weeks using a Canon Rebel T2i at 1080 p 24 with shutter speed 1/50.

  At the end of the first day of shooting, I had to transfer the .mov footage off the coast of the Trandcend 16 gb class 10 memory cards with card reader Kingston for the Raid. I used a legacy firewire card connected to the aforementioned PC (it's all I got for the firewire connection at the time), and I noticed that the file transfer has been extremely slow. So for the next two days after I transferred the rest of the video on the Raid via USB 2.0 and the other files transferred much faster.

  Play the images using VLC Media Player is well most of the time, but sometimes I see for about 5 frames pixel information is lost. It is not rolling shutter or jello. Part of the pixelated frame strongly for all 5 to 10 frames. I don't know if it's the loss of data on these images? I agree with a few images here or there, I can work around it if I have to...

  The problem:

  I used the DSLR 1080 p 24 preset to set up sequences of the first Pro CS5 project. After you import the images above, reading in two preview windows randomly is pixelated, similar to the effect of VLC, but random parts. For the most part, VLC is compatible with the management of the problem. Whenever I start the first it will be Pixelize frames in different places than before. Sometimes when I run first first is good, then after a few readings, it starts to distort. After management problem for the current session, the pixelation appears in the clips that have the green status bar. Also, sometimes (randomly) some of the clips in the timeline panel have green waves at the bottom of them, or are completely green.

  I tested the raw images in VLC, WMP, Media Player Classic (after you temporarily install KLite hoping to solve the problem). The problem that all .mov files seem to Pixelize the same framework of each player. First, but pixilated times randomly.

  Tried with two mpeg streamclip and even with cineform neoscene U transcoding. Same results.

  I have not been able to narrow down what is the problem. Any ideas?

  Thank you very much.

  The problem is resolved. My cache of media was written to my local hard drive (c :)), a WD Caviar Green 500 GB. It turns less 7200 RPM, as it is friendly green. After clearing the cache and redirect the path to the raid 0 drive 7200 RPM, the media reads in the timeline smoothly without pixelation. A high technology, Adobe has helped me solve this problem after a lot of troubleshooting. Thank you!

• First Pro CS5.5 never started place... error message each time. Help please?

  Hello...
  
  I recently bought the suite Production Premium CS5.5.
  
  Most of the work programmes. (I have not tried ALL the.) But the main - CS5.1 Photoshop and After Effects - work perfectly).
  
  But first Pro CS5.5.0 does not open. Keeps giving me the good old error message: "Adobe first Pro CS5.5 has stopped working". What happens whenever I try to open it. And it is never past the opening screen. He is MIGHTY frustrating. And there seems to be no coherent advice in this field all over the Adobe Forums. Maybe I've not spotted.
  
  I run a Fujitsu Lifebook T901, using Win 7 64 bit Version Service Pack 1 Build 7601 6.1.7601
  
  Processor Intel (r) Core i7 - 2620M 2.70 GHz, 2701 MHz, 2 Lossnay, 4 logical processors
  
  Version of the FUJITSU BIOS/Date / / Phoenix Technologies Ltd Version 1.04, 17/02/2011
  
  8 GB of RAM.
  
  Please guys... what should I do?
  
  Operating system: Windows 7
  Printer model / version of the driver: Intel HD Graphics Family
  Video display card / driver version: 8.15.10.2246
  He has already worked? If so, what has changed? (provide comments in the description field): No.
  Same results with different files? : not Applicable
  Same results with different computer? : not Applicable
  Change recent system hardware or software? : no

  Alan is correct.

  Here is an overview of the system requirements:

  http://www.video2brain.com/en/videos-5351.htm

• First Pro CS5.5 error, no file format supported

  Hello

  I have been using first Pro CS5.5 for over a month now and have created a certain projects, all of a sudden I can't reopen an exciting project, I get the error messafe "file format not supported", then when it opens the entire timeline is there with t e files except the photo/video is not visible, the only thing that happened is I tried to put the folder the file is located in in my drive hard but has not have enough space, so left it on my desk, but in a different folder, then when I went to open it again once I put the file back on the desktop so it would take the same path that I crested when he

  I hope that makes sense, I'm not good with all the technical stuff, is there a quick fix for this? I hope so

  Thank you

  Kathryn

  I tried to do what you say, but he always says the media are online, I can create new projects and use the same files that I used in my initial project, but it won't allow me to open the project original, very frustrating, any other ideas?

  Kathryn,

  Can clarify you this? Did you mean that import the project into a new still shows as offlinemedia? In addition, you say that the same media files work fine in another project, but have not all original projects? Just try to understand clearly the rub...

  Try this: in one of your projects, showing that the media are offline, make a right click on one of the elements of offline in the project Panel, and select "Link media." In the dialog box that appears, locate the file that is requested; the checkbox "display only exact matches name" could help crop choices of file. Double-click this clip; Premiere Pro must create a link to the file at this point. If it works, you can select all of your offline items (or the tray containing them) and use the same process. If all of your clips are in the same relative location, you must have locate the first file, and then the rest will connect automatically.

  Looks like when you the media/project moved and reopened, you cooked in the offline state. This should help you (theoretically) back to speed.

• First Pro CS5 capture Canon XL1

  Applicant help!  First Pro CS5 does not recognize my XL1 camcorder when connected via a DV (ieee1394) cable.  I entered parameters in the camera Canon XL1, but Premiere Pro capture shows the device as 'offline '.  The PC is windows 7, 64 bit and it recognizes that a camcorder is plugged (beeps and displays an icon in "Devices and printers" when the XL1 is enabled.  I downloaded a driver XL1, but it has been dated to 2006.  I suspect that the XL1 is not save as a XL1, because I have not a compatible with windows 7, 64-bit driver.  I hope someone can tell me where I can get a updated driver XL1 or another way to get the Premiere Pro for capture (i.e. non-specific camera?).  I can't believe there is no way to capture from a camcorder XL1 to Premiere Pro on a windows 7, 65-bit of the system.  Thank you.  Dave

  Don't forget that your firewire driver is set to "Legacy".

  Computer management > Device Manager > Host Bus IEEE 1394 controller >
  Update driver software... > Browse my computer > let me Pick >
  1394 OHCI Compliant Host Controller (legacy) > next

  

• Problem with the creation of a framework implemented in first Pro CS5 masks

  I'm having a problem with creating masks of an exported framework generated from first Pro CS5. I export the image that is 720 x 480. I open the image in Photoshop and check that there is still 720 x 480, change it to create my mask and important in Premier Pro to find the frame is therefore more 720 x 480. To see if the problem is with Photoshop I tried to export a picture and immediately re - import the back always first.  Of course, he has apparently changed aspect because it shows with vertical black bars on either side in the source viewer and actually overlaps the clip original/image as an image horizontally narrowed as part of the program sequence. No idea what I'm doing wrong?

  I am assuming that you are working with a DV footage in a DV sequence; This video format uses non-square pixels, but the images have square pixels. Probably, the pixel aspect ratio (PAR) of the imported image is not be interpreted correctly.

  Right-click on your any graph, and then select Edit > interpret footage. Check that the format of the pixels in the image is set; If this isn't D1/DV NTSC (. 9091), click on the option button "Conform" and choose that BY the menu drop down.

• First Pro CS5 trial version:

  First Pro CS5 trial version - installation of third-party plug-ins third:

  Could someone pleasetell me if the ability to install / use third-party plug-ins(i.e.: New Blue & Pixelan effects) transition has been disabled for thetrial first Pro CS5, I tried installing them but have beenunsuccessful doing so it would be nice to see how they behavein CS5 before you go ahead and buy the full version only to find I have Pascal liked to use them (I'm currently on CS3).

  
  

  Thank you very much...

  If you find that is NOT the issue and these effects/Transitions ARE 64-bit, please let us know. As I said, I'm not aware of ANY other restrictions on the trial, but must admit that I never used any trial from Adobe.

  Good luck

  Hunt