First Quiz question is ignored during the second attempt.

Similar Questions

• I have a column with two values, separated by a space, in each line. How to create 2 new columns with the first value in a column, and the second value in another column?

  I have a column with two values, separated by a space, in each line. How do I create 2 new columns with the first value in one column and the second value in another column?

  Add two new columns after than the original with space separated values column.

  

  Select cell B1 and type (or copy and paste it here) the formula:

  = IF (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  shortcut for this is:

  B1 = if (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  C1 = if (Len (a1) > 0, Member SUBSTITUTE (A1, B1 & "", ""), "")

  or

  the formula of the C1 could also be:

  = IF (Len (a1) > 0, RIGHT (A1, LEN (A1) −FIND ("", A1)), "")

  Select cells B1 and C1, copy

  Select cells B1 at the end of the C column, paste

• My question mark is 6, the second of the three symbols. How to type it?

  Original title: question mark

  My question mark is 6, the second of the three symbols.  How to type it.

  Acer keyboard.

  See if this will help.  Have you looked in the manual for your computer?

  http://community.Acer.com/T5/desktops-all-in-ones/keyboard-functions/TD-p/75665

• Set the failure message on the display of the results of the second attempt

  Hello

  I have put 2 attempts for the quiz of all and to customize the message of failure for the second attempt failed such as:

  • On the first attempt failed, the message reads: sorry! You can't pass this time. Resume the quiz.
  • On the second and last attempt should read the message: sorry! You do not have. Please review the course.

  I know that I can put a message of failure Quiz Préférences > settings > Quiz result Messages > Message Fail. But I can put more than one failure message (the first one) and one of the last attempt in Captivate 5.5?

  Please let me know.

  Welcome to the forum,

  Try to change the number of levels of failure (accordion Action) from 1 to 2. You will get two legends of failure in this case, you will be able to change.

  BTW, it's a good idea to mention the version of CP you use (detailed, because there is a difference between 6.01 and 6.1). Sorry, did not read you use 5.5

  Here, still too early. My workflow is to issue level, not on Quiz level. To change the legend of failure then, I don't see an easy workflow immediately. Stocks advanced and custom issues, it is certainly possible, but with test blades by default, you don't have much control over the objects on this slide of quiz.

  http://blog.lilybiri.com/question-question-slides-in-Captivate

  Lilybiri

• Adobe Creative Cloud 12 month prepaid membership - loading and redeeming failure code said not be valid on the second attempt

  Adobe Creative Cloud 12 month prepaid membership - loading and redeeming failure code said not be valid on the second attempt?

  Suggestions please

  Redemption codes are good for one use.  Contact the Adobe Support directly for assistance with your purchase (if you bought through Adobe)

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Review Quiz button do not navigate to the first quiz question...

  Hello

  so I created a guide to simulation of interactive software for users in my organization. At the end of this guide, there is a quiz (multiple choice, true or false questions) with 15 slides. At the end of the quiz, the results screen is displayed with the button "Review Quiz". Clicking it navigates the user to drag the 72/245 rather than the beginning of the quiz, the first question.

  How can this be corrected?

  Thank you very much

  Achello

  You have an interactive object somewhere on this slide that is orchestrated to appear on the quiz.

  Open the dialog Advanced Interaction (F9) and search for the object here.  Delete the partition.

• How to customize the pagination so that the first page (which is actually a cover sheet) is ignored and the second page is numbered on page 1?

  I'm working on the creation of a document that will be printed and bound as a book with comb-binding.

  The cover of the book is the first page of my PDF document. Because this first page is the cover, I don't want that it counted as a page for purposes of pagination. Basically, I want to configure so that paging starts with '1', but it starts from the second page of my PDF document.

  I'm using Acrobat 8 Pro. I've been fiddling with the menu of the header/footer page, but so far without success. Any help is greatly appreciated, thank you!

  Well, after having thought about it some, more I realized that there is a simple way around this!

  1 remove the cover page of my document

  2. Add a page numbering

  3 Add again the front page and do not update the footer

  I was driving myself crazy trying to find a way to do it!

• Has been able to play games downloaded the first time, but can't open the second time I try

  Original title: could not open the file

  I downloaded a few games and the first time, I could read, but when I tried to open the second time, they just won't open.

  It would show the loading symbol, but nothing happens?

  Help?

  Hello

  • Did you follow the steps?

  Try to run the game in compatibility mode and check.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  If the problem persists, try to uninstall and then reinstall the game and check if this may help. You can also post your question in the support forum for Big Fish Games and control upgrade game.

  http://forums.bigfishgames.com

  Hope this helps

• 2 questions here please: during the unlocking process: it says that I need to erase everything on my iphone. So, what of my contacts? How can I get that back?

  2 the questions here please:

  During the unlocking process: it says that I need to erase everything on my iPhone 5 s. So, what of my contacts? How can I get that back? because the backup to icloud it nor iTunes.

  In addition, what happens if I do not erase the content? That will prevent my form of phone is unlocked?

  Thank you very much

  RAJS

  Do not erase everything on your phone under the procedure of release.  If you have your phone set to backup Contacts on iCloud, they will be saved and then can be later reloaded on your phone after erasing it.  I just got two iPhone 5 and it worked well.  Also to do a full backup to your computer via iTunes and transfer everything what is not already saved if you are asked.  The only problem I encountered was that some applications does not and I had to manually reinstall the.

• I'm not able to install both on the same PC LabVIEW applications. I have uninstall the first application in order to install the second. Is there a way to avoid this?

  I wrote two LabVIEW applications. The first acquires data from three different devices, displays the data and writes it to a file. The second application reads the data and displays it on the screen.

  Can I install the first application and run it, but I can only install the second application if I uninstall the first application.

  Any ideas as to why this is happening?

  You install applications by using a Setup program created with the application builder to LV?

  What LV version do you use?

  You have a dedicated for each installer build script, or do you still want to change the settings of a single build script (which would be a reason for this behavior!)?

  hope this helps,

  Norbert

• My first computer user when I created the second user... Help! :(

  Hello, I really ned a quick response... :/

  So I created a second user yestarday, so I had them 2, after some time I switched user and then turned my pc of. Later when I went to loggn in my user to fir trees, I couldn't, because it was just possible to loggn into second account... it does not show that there first user, I had...

  The second user that I created was a Director? would it be posible that my first user is deleted somehow? :((

  I don't know what's heppening, but I really need the other user, because its so much important things for me! :(

  But I still do not see him... It's like gone...:(quand j'ai voulu loggin àle premier utilisateur, il ne m'a donné choix trop choisi premier utilisateur ou en second lieu, c'est juste me demanda pasword à deuxième utilisateur j'ai créé:(()

  Please help me, I need a lot of treatment

  If I read your post correctly, I guess the account you were using was the original administrator account which can be renamed.  When you create a 2nd account, it is normal that Windows hide the original at this point administrator account.  Rename the user administrator does not rename the profile, so you will probably find your files in 'Administrator' in the folder c:\documents and settings\.  This may be the reason why your account is hidden.

  If this is the case, to log in to your original account, when you get to the opening of session "Welcome" with only the 2nd account, press Ctrl-Alt-Del twice.  This should bring up a login screen 'classic '.  Try typing your user name and password in the boxes and see if you can connect.

  If you can connect and want two accounts to display, you need to create another profile and transfer your files/data in this additional profile and leave the original hidden administrator account.  To do this, pretend that your hidden account profile is corrupt and follow one of the following procedures:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  HTH,
  JW

• First Pro CC will not recognize the second monitor

  Greetings:

  I'm having a problem with the help of my second monitor to the output in CC PP.  I did the following based on another post:

  Try these two steps to check the transmission is enabled:

  1. go in the program monitor Panel menu > check "Allow to pass" is checked.

  2. go to Preferences > reading > check your 2nd monitor is present and active.

  What I get when I do it is a black screen that covers the top left of my screen at 1920 x 1080, the size of my other monitor.  When I save a project and use my second monitor for a sign, say under my belt, I'm able to drag the Panel above and use it, but when I save and reboot, the Panel is always on my primary monitor:

  Model name: iMac

  Model identifier: iMac13, 2

  Processor name: Intel Core i5

  Processor speed: 3.2 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 32 GB

  Boot ROM version: IM131.010A.B05

  Version of the SCM (System): 2.11f14

  NVIDIA GeForce GTX 675MX:

  Chipset model: NVIDIA GeForce GTX 675MX

  Type: GPU

  Bus: PCIe

  The PCIe track width: x 16

  VRAM (Total): 1024 MB

  Provider: NVIDIA (0x10de)

  Device ID: 0x11a2

  Revision ID: 0x00a2

  ROM revision: 3707

  Exhibition:

  iMac:

  Display type: LCD

  Resolution: 2560 x 1440

  Per pixel: 32-bit color (ARGB8888)

  Main screen: Yes

  Mirror: Off

  Online: Yes

  Integrated: Yes

  VP2365WB:

  Resolution: 1920 x 1080 @ 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: RDC104500162

  Mirror: Off

  Online: Yes

  Rotation: support

  I tried different confgurations in Preferences-> reading, but get the same result every time.  I have to force quit when I get the black box, I'm unable to access other options of PP.  Anyone encountered this, and if so, is there a solution?  I saw that there was a problem of "transmit", but that does not solve this problem.  Thank you!

  I don't hate replying to my own post, but I thought I'd post here how I solved my problem in case someone else ends up here with a similar one.

  To be clear, I have 2 monitors and when I activated transmit full playback screen would be superimposed on my workspace creation on monitor 1 even though I had specified to monitor 2 in my video device in the preferences > reading.

  It seems that during the last few months (I have a vague memory of it), I decided to check the "improvements" in the way Mavericks managed multiple monitors. I created two spaces in Mission Control, this is how Applications in the dock wins a menu extended options in the menu contextual (the one that appears when your right click the application icon in the dock). I knew that this extended menu was there because the site of Apple told me.

  From the OPTIONS menu on my 2 monitor setup are then ASSIGN to > all workstations; OFFICE ON DISPLAY 1; OFFICE ON DISPLAY 2; NONE.

  After trying the various options to see if the operation was consistent with the explanation of Apple and if I wanted to work with spaces, I decided that I don't have not so I removed the spaces that I created in Mission Control.

  Remove the deleted spaces these additional options ASSIGN to THE menu even though I wasn't aware of this at the time.

  A few days later, I went to allow the TRANSMISSION when editing in Premiere Pro (that I had used successfully before) than having the problem described in this thread. I stupidly credited this problem for a recent update of CC and in the release of 2014 CC does not correct it, I started to look elsewhere.

  Cut to the end and the way - after proving that a new Mac user account test does not show the problem, I have returned to my user account, active areas in control from Misson, changed the menu ATTRIBUTE to None for Premiere Pro (default), then the TRANSMISSION function worked correctly, showing a full picture has been assigned to the correct window.

  OK, the last paragraph may suggest I knew what to do but I have not, I had spent a lot to research in the library of the user to search for differences, until I came across this.

• CLOSE first button does not work, but the second is

  Hi, I'm working on a new web site using Flex 3, but I have a weird problem where I got no information yet on the issue. I opened a TitleWindow to display a full-size image where I want to show a close button at the top and bottom of the image, a close button (some images are very huge and it is the purpose of the TitleWindow). The close button in the button works fine, but one upstairs work not at all (but it appears correctly). What I tried to do was to create 2 HBox inside an HBox. The two HBox are called hbox1a and hbox1b. In the hbox1a, I put a tag that contains the title of the image. In the hbox1b, I put the close button. But the "close" button down is not inside an hbox, pay only the next component in the TitleWindow.
  
  If anyone can help me to understand why the first close the (top) button does not work, I appreciate to understand.
  
  Thanks for any help!
  

  Well! It is always good to be able to respond to ourselves, but it was fast! Maybe because to explain on this forum has been a good thing to clean the idea!

  In any case, I decided to create a new function to close the TitleWindow where I decided to pass the ID (name) of the TitleWindow instead of the event.currentTarget.parent and it works! So I think that I can reduce this to a single function and use my second function for the two close button.

• Download first Pro CS 5.5 on the second computer?

  I bought the first Pro CS 5.5 a few years back and now I need to put on my desktop computer. (He says that you are allowed to have two devices) How can I go about it?

  Download from product CS5.5 download

  Install and enter your serial number.

• Random Quiz questions repeating on the occasions of Captivate

  Captivate 9 using a Mac

  I have a 10 question quiz

  5 questions are mandatory

  5 questions are random 10

  Created 10 question pools. 5 with one mandatory question and 5 with two random questions

  Users must take the quiz at the end, there was $$username$ $ you reached $$cpQuizInfoPointsscored$ $

  AND advanced Action Pass = see shut up and leave (hide another) and does not = button resume show and hide on the other.

  The problem is when taking the quiz (NOT restart) the quiz presents the same issues. I guess it's because the random questions are selected during the loading of the project (is html)

  Questions ARE random during closure and relaunch the project

  How can we get the random recovery?

  I can only think to create another set of grouped questions and apply IF recovery quiz SHOW 2nd pool...

  but it is an assumption and prefer not too many break points

  thoughts...

  I'm sorry but that's how the random questions are indeed fixed, once they are selected from the pool. Recovery would never use new random questions.