Random Quiz questions repeating on the occasions of Captivate

Similar Questions

• Quiz Questions installed within the scrolling text box?

  Hello

  Is quick question, possible to enter the quiz questions in a text scrolling Interaction?  Thanks for your time.

  -Brett H.

  I don't think it's possible, because the scrolling text is an Interaction, and you have almost no control over it. Certainly not the questions by default, which is totally excluded.

• Quiz questions together Not Report - can't change

  I built a quiz using CP quiz slides - nothing personal. I saw all my quiz settings and from what I see he should report, but my results are always 0. When I look at the tab Advanced Interaction, each question is set to 0 points and the report answers column has NO for each question. I can not find how to fix these settings and am puzzled. I've built enough Quiz to find out that there is probably a box buried somewhere I did not check.

  I chose to LMS, but this isn't my problem. I can't even score for display during the test.

  I have a few questions on the quiz settings well. Why not quiz questions by default at least 1 point per question? Why no communication for the project 'activate' triggers 'Report answers' setting that I will try to find?

  I have included a few sample images. One has been truncated.

  

  

  It is not a normal questionnaire slide it's a blade to check knowledge. If you want a scored Quiz blade, use the Quiz option, instead of Quiz Question slide, check the knowledge of slide.

• How many questions might be in random quiz

  I use random quiz in Captivate 9 but if it the publication shows that one question, but I need to show 15 of the pool of questions.

  You insert 15 random question slides?

• First Quiz question is ignored during the second attempt.

  Hi all

  I have this weird problem with a quiz.

  Situation

  With Captivate 6.1, I have a Question of pool with 5 questions. The issues are all 1.7 sec on the timeline with the standard pauzé at 1.5. No feedback is given, all buttons are disabled except the submit button.

  In the project, I have 5 random slides, related to the question of the questions pool.

  The quiz settings: 80% for spend, infinite attempts.

  Question

  When I start the second or third try of the quiz, the first question is shown, but after a second or two, publication (SWF and SWF-SCORM) continues to the second question.

  It has not resolved

  These things I tried:

  1. Reissue with "Force republish all slides" selected.
  2. Removing all the Question slides in the project and recreate them from scratch.

  Can someone help me with this?

  Best regards

  Dieter

  I have heard some evidence that you should never set quiz question slides less than 3 seconds in length.

  Try to make all the quiz questions about 3 seconds with the break point to 1.5 seconds and see if it improves the problem.

  Another request: do you have removed or replaced one of the elements by default question slide as the legend of the Question title or caption of the Question text? If so, which can also cause behaviors glitch.  You will need to delete questions that you have changed this way and replace them with quiz question slides.

• change the number of quiz questions in game

  I searched and searched the preferences, but can't find where to change the number of quiz questions in the race game treasure, available to active elearingbrothers.

  Thank you.

  They have tutorials on their Web site I've used in the past and have found it very useful.  I have used this model of game and if I remember correctly, it's in the menu variables.   Give it a try.

• Is it possible to set actions on the button "submit" a Quiz question?

  Is it possible to set actions on the button "submit" a Quiz question? I want to advance to the next slide or continue when they get the question right, or come at the end of the tent, they are allowed. I would like to eliminate the Next continue/button. Why does take two actions to come out of the slide? I use 8 Captivate.

  Not possible, or you you screw up the functionality of the quiz slide. Submit button is the most important object of each slide of the default questionnaire.

  I suspect that you are not on 9 Captivate but on an earlier version? Perhaps reading this article:

  Question Question slides in Captivate - Captivate blog

  You don't need the next to all button if you do not allow the review. If you allow the review, you cannot uncheck, because otherwise the user will be pasted on slides during the review. You can drag the next button under the light of the button (see article). The Send button will trigger actions Success/Last attempt, that you can use to your advantage.

  If you want to limit the submission of a single click process, you will find a scenario in the same article

• Excluding the review quiz questions on

  Hello

  I have a path with a quiz at the end. However, in the course itself, I have a few interactions that were better managed (I thought) in the form of the Question pages. They provide feedback and try again, and I defined them as cash for 0 points and I unchecked "report responses.

  When the student has completed the end of course quiz, I wish they were able to review their answers on the quiz questions (no change). I don't want this review, including the questions that appear, with comments, in the body of the course.

  Is it possible to exclude these questions from the quiz test?

  Hello again,

  I didn't say 'hide', but 'Skip '.

  What is a linear project? I mean, are the 'real' as issues after the interactions which are not marked but when visited in review mode? In this case, a tip action triggered at the entrance to the first slide 'interaction' will do. There must be a conditional action, something like this:

  IF cpInReviewMode is equal to 1

  Jump to the Question1 Question1 corresponding to the first real Question slide

  Continue

  ON THE OTHER

  Continue

  Not so complicated, right?

  Lilybiri

• Captivate 7 - Quiz questions take a long time to advance to the next

  So I have completed my course. All along (each slides or so) I quiz questions that are classified but undeclared. They are simply there to prepare the student for the final exam. They have the opportunity to submit the response followed legends correct and incorrect. At the end of the course, the trainee meeting these same issues (55 in total), but now they are back to back and they are both classified and reported. Here, they have only the option to submit.

  When they take undeclared quiz questions, click on submit and it quickly goes to the next slide, because it is set up to do. BUT on issues that are noticed and reported, when they click on submit, it really takes a lot of time to move to the next slide (and a lot of time, I mean 10 more seconds). At the end of the review, when they answered the final question, and click to go on, the two final slides take more time (sometimes up to a minute) to move forward.

  I understand it is going to be some delay while the system reports the score for each slide, but this seems abnormally long. This shift occurs in preview mode, scormcloud and during a test on a LMS (Gyrus) client.

  Any idea on why this is and how to prevent it. It's really hard to ask my customers to be patient and stay there for 10 seconds every single issue. I need them to take the final exam at their own pace - fast or slow.

  Thanks in advance,

  Arthur

  I know, it is barely visible, because the line between the inactive and the Active part is black on a blue background (already invited for 6 or 5.5 to change that color...) You will need to go over it all in the middle of the timeline until you see the line double cursor appearing and you can put:

  

  Go to the next slide makes them faster. I had no problem with our LMS, but read on this forum (you know that I am often here) that some have done so. No rule of the world, by dragging the break more towards the end has almost the same effect, but you can leave a little bit more time (less than the 1.5secs).

  As I know there is no way to change the sleep time by default for Question slides, as the timing is never available on Quiz Master slides.

• Review Quiz button do not navigate to the first quiz question...

  Hello

  so I created a guide to simulation of interactive software for users in my organization. At the end of this guide, there is a quiz (multiple choice, true or false questions) with 15 slides. At the end of the quiz, the results screen is displayed with the button "Review Quiz". Clicking it navigates the user to drag the 72/245 rather than the beginning of the quiz, the first question.

  How can this be corrected?

  Thank you very much

  Achello

  You have an interactive object somewhere on this slide that is orchestrated to appear on the quiz.

  Open the dialog Advanced Interaction (F9) and search for the object here.  Delete the partition.

• Cp6 - Quiz questions (change the behavior to submit button - quiz numbering)

  Hi all

  This is the first time I built a Uncategorized quiz (I call it an evaluation of knowledge - placed between courses).

  I chose Multiple choice quiz and scored (deselected report answers to the Quiz properties).

  Issues related to the:

  Is there a way to change the Quiz unintuative actions and button controls?

  I want the learner to be able to click on the submit button and move to the next question immediately (like any other rating system I've ever seen)

  The way Captivate: click on submit, display a correct or incorrect and if it is correct, ask to the learner to click on 'Y' or anywhere to continue.

  I have three sets of questions of quiz (for each of the three lessons).

  Is it possible to keep the number of distinct quizzes in each lesson. Currently, there are 4 questions in Lesson 1, 5 in Lesson 2 and 3 in Lesson 3. I want some lesson 1 quiz questions to display 'x 4' NOT 'x 12"'.

  And MOST important...

  Quiz results appears ONLY on the last set of questions. I need a result of quiz for each of the three sets of questions. Is this possible?

  Thank you

  Shawn

  Take a look on:

  http://lilybiri.posterous.com/intermediate-score-slides for your last question

  http://lilybiri.posterous.com/question-question-slides-in-captivate to refine the process in two steps on question slides

  Lilybiri

• After a quiz can show you the questions and answers of the user to review of test

  After taking a quiz, is there a way to show the questions and answers of the user to review of passing the test.

  And those who failed the quiz would go to the first slide again to retake the test.

  Thank you

  Add an interactive object received, such as a button or slide 1 clickbox. Then the review will begin from there because Captivate counts of any object marked as belonging to the scope of Quiz.

• New to Captivate quiz question slide only to display the gray

  I use the version of Captivate 5.5 test. I have experimented with the creation of projects and additions slides, and everything works until I try to create a Quiz. Although the question slides are inserted, all the slides are empty except for a gray rectangular area on each slide of the question; no example of text or anything (which is what I was expecting, based on the tutorials I've read). When I double-click the gray area, nothing happens. The property Quix box identifies the slide such as appropriate (e.g., Multiple choice questions) question, but there is no way to add a real question or answers to the slide. Anyone know what is happening?

  

  FYI - I restarted my computer and now the Quiz slides are working.

  Thanks for your help!

  Chris

• students unable to enter the answers to quiz questions

  I launched our first class and coming up on a problem that I have not met that we tested the course.

  I created the course in Captivate 5.

  All our learners use their computers to complete the statement, and I have no control on what equipment they use.

  A couple reported that they are unable to enter the answers to the quiz question. For example, it will not even let click the buttons for the multiple choice answers. Those who reported the issue seem to have older computers (about 5 years), but say that they have updated to the new version of flash player.

  We tested the module on some newer computers, and we didn't have this particular problem at all.

  What could cause such a problem?

  Sanna

  Sanna,

  He need to sit and actually watch users who claim to have these problems.  It is likely that what they complain about could be the result of user error.  For example, they may have left the scope of quiz at some point after entering the quiz (maybe to dive towards the content of the slides and check one) that would then lock up their quiz slides and avoid answering.   If you look at exactly what they're doing, then you will know if yes or not it's really a fault in your course or not.

  Just to check if the issue is reached scope quiz, make sure you move backward is disabled in the quiz settings.  Which should prevent users from being able to jump away from quiz easily.  See if your problems disappear or are significantly reduced.

• Changing the points quiz question

  Hi guys

  With the help of cp5 I created a quiz but because of the vagaries of the LMS, I need to change the total points for each question (default 10 as can be seen in the table of Advanced Interaction but need to reduce each). Is this possible? It was in previous versions. I looked everywhere but can find no way to do this.

  As always all the help appreciated

  Spiersey

  Looking for the points in the Quiz properties panel:

  

  If that's what you're looking for, can I recommend to switch to the workspace Quizzing? This workspace you will have both the properties panel and the Panel properties Quiz at your fingertips, while in the classic workspace, they are both grouped into the same docking on the right side.

  Lilybiri