First Pro CC will not recognize the second monitor

Similar Questions

• HP dv7 will not recognize the second hard drive

  My HP dv7-2185dx running Windows 7 will not recognize the second hard drive, bios recognizes this Intel Rapid storage acknowledges.

  Main hard drive is a 1 to install a second hard drive to 500 GB.

  Hello

  Try the following.

  Judgment of the laptop and unplug the 2nd HARD drive.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  When this is finished, stop the laptop.

  Reconnect the 2nd HARD drive, then start Notepad and let Windows take over completely for a few minutes before checking if the reader appears in the lower part of the disk management window.

  Kind regards

  DP - K

• Adobe pro 9 will not recognize the .xlsx (Excel) files to combine documents into a single PDF

  I have yet to understand why Adobe pro 9 does not recognize the .xlsx files to combine into a PDF file. Need this problem solved quickly before our high season resumes. any suggestions? I know that you can save the Excel worksheet to a PDF document, but it takes too much time and space on our server. We must be able to combine the Excel file with files Post Script together at a time instead of going back to add more later. We are constantly updating of spreadsheets on a daily with the type of business that we do, you can understand why save the worksheet in PDF format updated every hour is a problem/waste of time.

  Thank you

  Brittany

  My guess is that you have OFFICE 2010 or newer. AA 9 PDF Maker that is necessary for what you want to do is not compatible with OFFICE 2010.

• Windows 8 will not recognize my second monitor

  After the upgrade to Windows 8, the computer does not recognize my second monitor. Disconnect and reconnect the device after it remains unknown. I am running a Dell Inspiron all in one office. Do I need to install a driver so that he will recognize the secondary monitor? If so, which?

  Access

  Control Panel\All Control Panel Items\Display\Screen resolution

  and make sure that both monitors are indicated and "Extend desktop to this display" is selected for each monitor.

  If both monitors are not displayed, try clicking on "Detect".

  ==================

  Check Device Manager to see if the card video cards (if you use more than one) and both screens are indicated in the list of devices.

  Tom Ferguson

  Later:

  Try to go to the Dell website, enter your service number (usually located on a label on the back of the case) or the installation allows to detect the pattern.

  http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn & ~ ck = mn

  See if there are files on your computer for Windows 8.

  ==================

  Another option is to use a USB to VGA or USB key to video DVI 'card', according to which will accommodate the Dell) has no Windows 8 pilots. For example. I use a unit of IOGear (USB to DVI). After starting Windows 8 Pro, it was detected and drivers automatically downloaded and installed for it.

  TF

• First Pro CC will not import the .mov files

  Problems with first Pro CC, I can't import. MOV files created with my Canon 6 d.

  If I try to import the files, I get a msg of error "File not supported" very generic.

  It is a new installation of first CC on a new computer. I was able to import them using first Pro CC on the old computer.

  QuickTime will play well these files on my new computer.

  Premiere Pro CS6 will import these files to the new computer.

  First Pro CC would open them well on my old computer.

  I don't know yet where to start. Any help would be appreciated.

  Here are my system details:

  • 10.9.3 OSX
  • new Mac Pro
  • 3 GHz 8-Core Xeon E5
  • 64 GB OF RAM
  • The files are on the G external drive - Tech Thunderbolt.

  Well, I uninstalled and reinstalled first CC and all works well. No idea what went wrong, but its working now.

• Windows 8 does not recognize my second monitor

  Initially, I had a desktop with monitor Samsung acer computer. I added a second monitor (Acer), in the hope of having an extended screen.  I use a splitter of VGA cable but I got a dual monitor.  How can I make a second screen when windows 8 do not recognize my second screen.

  Hi Gayle,

  You get an error message when the second screen not not detected?

  Ensuring that both monitors are shown and Extend Office for this view can help get the problem solved.

  Perform the steps suggested by thomas ferguson from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Windows-8-will-not-recognize-my-second-monitor/45d31b03-87c4-40CB-bd5a-1d7011e8d860

  Answer please if you have any questions.

• TECRA 8200 does not recognize the second module memory

  Hi, I have a problem with one of the TECRA 8200. The machine only recognizes the first module and not the second 128 M I tried form to upgrade memory up to 256 M. module is compatible because it works without problem with an other TECRA 8200!

  I updated the bios to version 1.6 but there is no way: the PC does not recognize the second module!

  What can I do?

  Hello

  Perhaps is the second memory slot is faulty. Put this add-on in the first slot and check again.

• File Manager XP PRO SP3 will not recognize USB floppy A: drive

  File Manager XP PRO SP3 will not recognize USB floppy A: drive

  The system tray alerts "new hardware found" and "installed".

  In the system. material | Device Manager | floppy drives, the disk is present, activated and works

  If I pay BACK the drive is located and can be read and written.

  The drive is not the case in (windows explorerer file manager.

  The drive is not present in administrative tools. computer management | storage | removalable storage | libraries.

  In the removable storage service is started.

  If bottom line, the usb floppy is a material recognized, works under DOS, but there is no access to XP.

  This happens with two floppies different usb connected directly to a laptop (not a hub). When connecting to another XP computer, the disks are immediately recognized in the file manager and work as expected.

  Any ideas?

  It's embarrassing, BUT I solved the problem by using TweakIU. It seems that in the workstation. The floppy drives were not verified. Verification of A & B readers did the trick.

• Fuze 4 GB will not recognize the change of information tracking

  Right then, I had some problems with my Fuze MP3 player. When I download the new music on the device, the ID3 tags all come out the way they are supposed to. However, if I remove the music that is on the drive and replace it with the same tracks with ID3s update, it will not recognize the change of title, album, or artist, if the song file will be updated. I know because I had problems with the songs with the same name or accidentally given songs the name of another song, which resulted in incorrectly labeled music.

  I tried to format the drive, I tried to remove the music manually in the file system, I tried to change the USB mode and delete the file that I said holds the ID3 data, and I tried all the possible permutations of disconnection and let the Player recognizes the changes. This includes the removal of all the music in the player, disconnection of the latter, confirming that there is no music on the system, to change the USB mode, deleting the file with the ID3 information, turning the rear USB mode, reconnect, put my music on the device, and the problems have not been resolved.

  It is likely, it is just to be fickety, and there is something I'm don't is not right, but it's the second "rocket" I've owned - I love the model and went up to return a Fuze + in favour of the former model - and one has never had this problem. I'm willing to try anything within reason to solve the problem, so I hope someone can point me in the right direction.

  In fact, the problem was not as expected at all. I think it turns the problem is Windows Media Player, which I only use to sync my music on my MP3 player, had a library with outdated information. So after the Player update multimedia, I refreshed my library recordings and everything worked as you wish. I just to make sure that if I make changes to existing songs in my library.

  Thanks for all the help, guys, guess it was on my end.

• HP 6120 t BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller

  Hello

  HP 6120 t (vista) BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller. The other SATA disk and the DVD player came with the machine.

  I hooked my old 200 GB Hitachi drive via the controller. I also put the jumbers in the present as a slave. I also took the original WD drive and just connect the IDE hard drive. BIOS do not show any drive at all.

  I would try something possible at this time I have a lot of my data on the old disk.

  Thanks appreciate any suggestion.

  Try to enter the BIOS and I believe under change of Advanced menu of SATA to IDE or Enhanced.

  You need to do when you install Windows XP or you will get a blue screen and it does not start.

  Don't forget chang back when you put it in your drive home hard sata.

• PreludeCC and first Pro CC will not update error: "log Transport 2"

  PreludeCC and first Pro CC will not update. Update gets to 62% and then stops with the error code following "Log Transport 2"

  System

  OS 10.9

  MacPro 3,1

  All other applications are updated.

  HI Steve & Perry,

  Have you tried to reboot the machine and apply the updates again? If so, you still get the same error message? If Yes, could you please share a screenshot of the error you get?

  See you soon,.

  Michael Sharma

• I lost my WiFi signal after having placed a time Capsule in the system. Now the Airport Extreme will not recognize the system. Any ideas?

  Any ideas on why my Airport Extreme will not recognize the system after the integration of the time Capsule in my system? Continues to have a flashing yellow light after trying all suggestions of technicians from the Apple Store and Internet provider.

  Since we don't know all what has been tried, we will have to start from the beginning if you don't mind.

  What exact models are your AirPort Extreme and Time Capsule? What is the brand and model of your modem Internet? I'll assume that Extreme is your "main" router and is directly connected to the modem by Ethernet... correct?

  Do you have the Time Capsule (TC) connected to the extreme, by wire or wireless? What is your goal for the TC? In other words, will not be used to extend the reach of the extreme wireless?

• Time capsule will not recognize the backup from another mac

  Time machine will not recognize the backup from another mac

  Time Machine will never find "another" Mac backups unless you've been backup that 'different' Mac on the same Capsule you have there.

  So, we need more information and to try to understand what it is that you are trying to accomplish. Please assume that we know nothing about what you could have done in the past... (since we don't have).

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Try to burn a CD. The system will not recognize the blank disc or let me burn__

  Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted

  Hello

  Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.

  If no joy:

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.