Fix a corrupted user profile - Outlook Import and addresses of mail folders.
Question: How do I copy/import my Outlook 2007 e-mail folders and addresses from my old to my new user profile user profile?
Thank you very much for the help.
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.
Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
known to cause this problem.
How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
Profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html
BE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.html
Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.
You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
two with the same password) use to test or difficulty of the other.
You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx
If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
not that an Admin account that is not used except for testing and difficulty).
Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
==============================================
For the problem of Outlook, please check with the experts of the Office and Outlook here: (re - ask your question in)
These groups). Basically you use Outlook - file - IMPORT and that it points to the Outlook.pst file on
the old profile.
Discussions of Questions General Outlook
http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us
MS Office discussion groups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
And here:
Microsoft.public.Outlook discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Outlook&cat=en_us_81f401b3-b3fe-4e8d-B291-066f30b63ec8&lang=en&CR=us
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
Unable to fix a corrupted user profile
Please read my resolution posted on October 14, 2011. My problem was never a corrupt user profile. It's an anti-virus program blocks my access.
I tried to follow the instructions for the attachment of a corrupt user profile, according to http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile
I created a third user account (UA3); Connected to UA2 and tried to copy and paste the files from the user to the file from the old account (UA1) on behalf of third parties (UA3).
First of all, I'm confused by the instructions which told me to copy all the files except the ntuser.dat, ntuser.dat.log and ntuser.ini files. Did that mean all files that begin with these names or all files with exactly these names? There are other files that start with these names, but are not only these names. For example: ntuser.dat.LOG1, ntuser.dat.LOG2, ntuser.dat {3f2f6031-3445-11e0-a837-8ga..., etc.
I tried to copy all files except those that begin with ntuser.dat etc, but I must have done something wrong because it did not work. I received a message that says I need administrator privileges and asked if I wanted to continue. I responded to continue, but the files do not glue.
If I am able to copy files successfully, once the UA1 profile copied to UA3, when I connect UA3, he look the same as UA1 or do I have to reset the context, etc. ? It is unclear in the article what I am really copy and what remains to be done to make them the same (with the exception of corruption, of course).
All this has emerged a problem that I had to try to add email accounts to Outlook 2010. After working on the problem for several days, the error has been identified as resulting from a corrupt user profile. If you need general information, please visit http://answers.microsoft.com/en-us/office/forum/office_2010-outlook/access-denied-when-adding-a-email-account/7bb6576e-53ab-4c94-830c-0e58be115dcf?page=1&tm=1318178723530
I've seen this kind of problem of corruption has reported several times in answers.microsoft.com, but nothing I found to date has addressed what is causing the problem in the first place.
SOLVED. I found the problem. This is a parameter in the anti-virus program. Somehow, he has been to block access to the registers for Office 2010. I removed the control registry setting and I am now able to add/modify email accounts. There is no corruption of the user account. I'm sorry it took so long to find it. However, I learned a lot during the process.
There are a number of things that need to be addressed in your instructions to "fix a corrupted user profile. It would be useful to others in the future.
1. they must state that, after the creation of the new user account, you must connect that account, otherwise the files are not created.
2. instead of say "copy all files except the file ntuser.dat, ntuser.dat.log and ntuser.ini.", it should say "copy all files except those that begin by...» (these names) ».
3. something should be mentioned on the shortcut files, with the arrow upward from their icon. They copy not at all in Windows 7.I have never able to repair a user profile with the instructions of the way they are written. (I think someone needs to try them with a Windows 7 system and deal with the permissions that are defined in Windows 7).
In your answer on what programs could cause something like that, you might want to talk about the access to the registry that is blocked by a virus protection program.
-
Trying to fix a corrupted user profile problem files copy to new profile
I'm fixing a corrupt user profile. I followed the instructions, the files were again copy profile and are almost finished.
Progress bar went from green to red and does not seem to continue to copy. The icon in the upper right corner continues to run. Should I continue to wait? For more than 30 minutes.
Hi suzy 59,.Log off or restart your computer and you login as the new user and check if all files have been copied. -
How is it difficult to fix a corrupted user profile?
my computer lost all passwords saved to various Web sites and when I get on them it gives me the possibility of saving.
Properties-options-tools-nothing recontroler internet œuvres
Create new account option gives check to save
Thanks in advance - what are my options to resolve this problem?
1. http://windows.microsoft.com/en-au/windows/fix-corrupted-user-profile#1TC=windows-7
Your user profile is a collection of settings that make the computer look and work the way you want. It contains your settings for wallpapers, screensavers, wallpapers, pointer preferences, settings of the sound and other features. User profiles ensure that your personal preferences are used whenever you log on to Windows. If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.
2. http://www.pcadvisor.co.uk/how-to/windows/how-fix-corrupt-user-profile-in-windows-7-3495216/
If you get the "logon failed" user profile Service error message, you have a corrupt user profile. Here we show you how to recover a corrupted user profile to be solved the problem or by creating a new account and transfer your user data across to the new profile.
-
My user profile may be corrupted on a base exchange network. If you are using IE8 under my connection, meet various picture errors with IE8. When you sign in with another account on the same computer, IE8 works ok. How to fix my user profile - is there a tool to diagnose and solve problems? Computer is running XP - Pro SP3 and all updates to Windows XP and IE8 are up-to-date. Have you tried the Microsoft Fix It tool, has not fixed anything whatsoever.
Thank you
Information is available on how to fix a corrupted profile, but they are all basically the same procedure has already told you your network Support Technician.
"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >"How to copy data from a corrupted to a new profile in Windows XP user profile"
<>http://support.Microsoft.com/kb/811151 >"Windows XP problems if your profile is corrupted"
<>http://support.Microsoft.com/kb/326688 >""Windows cannot load your profile because it may be corrupted"error message when you try to log on Windows XP.
<>http://support.Microsoft.com/kb/318011 >I would add that corrupt profiles are almost always accompanied, if not caused, the corruption of system files. As such, you must perform an operation of check disk (chkdsk) with the option to repair no matter how or if recover you. If you really feel lucky, a chkdsk operation sometimes will fix a corrupted user profile.
"How to perform the disk error checking in Windows XP"
<>http://support.Microsoft.com/kb/315265 >I will warn you that the chkdsk will take place at the next startup, that it runs before Windows load fully, can only be interrupted and can take more than a few hours to complete. It has also been known for discs of trash occasionally so it is prudent to update your backups before making.
HTH,
JW -
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
Hello
I'm confused by some of the steps in the instructions above. In step 7, where is says copy all the files except the file Ntuser.dat, Ntuser.dat.log and Ntuser.ini files, it means copying all the files except the files starting with Ntuser.dat, Ntuser.dat.log, etc. or just specific files? I do not see a Ntuser.dat.log file but I have two versions of this file Ntuser.dat.log1 and Ntuser.dat.log2. I do not see any file name or partial filename with Ntuser.ini. I have a NTUSER file name. DAT and three other names starting with NTUSER files. DAT (one ending by .blf and two others ending with regtrans-ms). If someone could say what files I do and do not copy?
Thank you.
Yes, do not copy them either.
-
Original title: Lost E-mails
How can I retrieve emails archived a corrupt user profile. Using Vista and Outlook Express.
You searched a .eml files? If you find one, do a right-click on one of them and open with | Choose the program. Select Windows Mail, and then check the alwaysuse the selected program to open this type of file. -
Corrupted user profile
I have a corrupt user profile. Windows XP. When I add a new can be the same, or should be different. And the user's profile should match the user ID?
If the profile has recently become corrupted, you can probably get the same user by performing a system restore operation:
"Windows XP problems if your profile is corrupted"
<>http://support.Microsoft.com/kb/326688 >Otherwise, you will need to create another user and copy your data. The simplest procedure is here:
"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >HTH,
JW -
Retrieve the user profile for a new user after user profile Service failed and could not be loaded
I use Windows Vista Home Premium operating system.
I wasn't able to log onto my user; I searched online for an answer and advise him to create another user - I had 'Admin' status with the original user.
I followed the following instructions:
http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&CS=19&docid=39CC797DE6882CB6E040A68F5B285C29&l=en&s=DHS
According to these instructions, I've logged on the account current and open a session on the new user account. However, all my documents, pictures, music, files, office, Microsoft Office Suite, Microsoft Outlook Email, etc. have disappeared!
I not created it of new files or documents under the new user in the fear that it crushes everything and help restore everything back to its original state.
When I performed a search of the system / "C: drive", none of the documents or files have been found.
How to restore these things, especially my photos? Or, how to restore the original user?
Any help you give me for this problem will be greatly appreciated.
original message: error message: "could not load user profile and user profile Service failed". Made a function to create a new user, but all my files, pictures, music, desktop icons and other stuff are GONE AND I can't FIND them ANYWHERE!
Hello
Your data and files are still there in the C:\Users\Your user name where C: is the drive where
user profiles are stored.You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.
Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
Earth) has been known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been logged on with
a temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Windows startup / corrupt user profile
At the start, I'm 'connected with a temporary profile' and "cannot access my files." How can I get rid of this TEMPORARY PROFILE and get back to my normal Windows startup? If I press ESC or press F8 at startup the problem is SOMETIMES avoided but the TI emerges the next time I log on.
I've updated the BIOS, cleaned the Hard Drive.etc.
When I use tips IE for FIXING DAMAGED USER PROFILE, after creating a NEW ACCOUNT USER and opening DOCUMENTS, I can't find TOOLS (pressing ALT does not help) so am unable to continue.
Any suggestions?
Hello
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
Safe Mode account has no default password (so unless someone changed
the password should be available).Some programs such as the Google Updater (if you've added the Google toolbar,
Chrome or Google Earth) has been known to cause this problem.Error message when you log on to a Windows Vista-based or Windows 7
computer by using a temporary profile: "the user profile Service has no logon.Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have visited
logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
----------------------------------------------------------------------------------------------------------
For Windows 7:
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html----------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html---------------------------------------------------------------------------------------------------------
If you can't access your old account you can still use an Admin to migrate to one
new (remember to always leave an account Admin who is not used except)
to test and difficulty).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
After you have installed the latest important updates (published 08/13/2013-see below) and then restart, I was unable to log-in to my profile. I received the following message on the login screen: "the user profile Service has no logon. User profile cannot be loaded. Rather than trying to fix the registry as described in 'support.microsoft.com/kb/947215', I restored the system to a point just before the installation of these updates in Mode without failure. I can now log in normally. I would like to install these updates (published 08/13/2013), but do not want to corrupt my user profile, what is my best course of action at this time so that my operating system is up to date?
Thank you
Thanks for your suggestion. I installed one at a time, restarting after each of them (tedious). However, this method was successful.
-
What are the causes of repetative corrupted user profiles?
Previously, I had only 2 active user accounts. Mine (admin) and that of another user (standard). The two profiles damaged in June - fixed finally. After that, I added another admin account and a guest account. 4 days ago, all profiles, but the corrupt guest account. Tried to restore - failed - Finally, went to safe mode on my account admin original and done a regedit. That fixed it all, then yesterday, all profiles EXCEPT the guest account corrupted again. This time, I did a restore for all adjust. What causes this? We do not have Google Chrome, ran malware program, had a few days 4 - they were removed; but so far, nothing. The only thing I see different is a Microsoft Update I downloaded on 8/27. Why this keep happening? I'm ready to draw down of anything - restore user profiles is exhausting.
"debij13" wrote in message News: 30780636-7737-483d-ade0-f1f7e1f2facc...Previously, I had only 2 active user accounts. Mine (admin) and that of another user (standard). The two profiles damaged in June - fixed finally. After that, I added another admin account and a guest account. 4 days ago, all profiles, but the corrupt guest account. Tried to restore - failed - Finally, went to safe mode on my account admin original and done a regedit. That fixed it all, then yesterday, all profiles EXCEPT the guest account corrupted again. This time, I did a restore for all adjust. What causes this? We do not have Google Chrome, ran malware program, had a few days 4 - they were removed; but so far, nothing. The only thing I see different is a Microsoft Update I downloaded on 8/27. Why this keep happening? I'm ready to draw down of anything - restore user profiles is exhausting.
Corruption like this can be caused by malware, it can also be caused by the fault of hardware.First, make sure your system is * really * clean - you say as your ran one program malware a few days ago and he finds something, but you don't say what and what program you used.What AV are you using? What other antivirus do you use?Check your out hardware - specific hard disk and RAM-for HD, use the control utility from the manufacturer of the HD on their website - download it, create the bootable CD and run it.for the RAM, use Memtest86 (even once, download it, create the CD and start with the CD)-lance from one day to the next and see what he has to say in the morning.
--Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers
-
Colorista 2 - corrupted user profile?
Everyone knows what...
All dynamic cursors Colorista 2 trail have stopped working in AE CS5 (they appear locked). I was getting as dynamiclinkmanager.exe crashes at the start of application (hanging Mediacore). Digital settings are the only way to correct color. (Even if it's slow, it always works in CS5 PP)
I recently updated the Quadro FX 3800 drivers and also install a Blackmagic intensity Pro card. Apart from that, there is no other updates. However,.
I rolled back the FX 3800 drivers and uninstalled the drivers of the BM and re-installed Colorista 2. Still no luck. I also fiddled before Windows 7 selective startup. Diddlysquat.
I created a new user profile and, therefore, all works as it should (even using the drivers updated FX3800 and WB card).
I can only assume that the original user profile is damaged. Can someone please tell me how I start to diagnose what aspect is perhaps corrupt, and how I could continue on the restoration of its features.
Thanks in advance.
If you submit a detailed bug report, we look at the issue and get red giant or Nvidia involved if necessary.
-
Outlook Express and MS Word mail merge email
An Outlook Express can be used as the default email client to work with the functionality of fusion and MS Word mail merge email? Looks like he wants to Office Outlook as default client. If I put the Office Outlook as default e-mail client, what will happen on Outlook Express, it is deleted or can it be flying over to Office Outlook?
I read in an article in Microsoft Office Outlook Express can be used for mail merge in office suites, but who have not yet tried. May be you can post this in Microsoft Office / Word forums for help says. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]
-
Problems with Outlook, receiving and sending e-mail
I have Windowsmail and outlook on my computer. I can only receive e-mail from msnbc.com. I was unable to block. I was told outlook is not compatible with Vista and that I should delete it. There is a site that I work with who require me to use their Outlook form. When I try to send information, it says that I need to load Outlook. I did and it doesn't work. Any suggestions? I have read suggestions by others on this site and none work. I also contacted the server and they said it was a problem for microsoft and contact them
Outlook 2003 and above are compatible Vista.
Outlook:
http://answers.Microsoft.com/en-us/Office/default.aspx
Office at the above link forums
http://answers.Microsoft.com/en-us/Office/ee861097.aspx
Outlook Help Forums at the link above.
They will help you with your Outlook questions when repost you in the Office Forums above.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
The battery lasts only about 10 hours
I have my having problems with my Apple Watch and the battery, it lasts only about 10 hours a day, it changed to recentlay don't know why to see screenshot. What can I do to solve the problem? Thank you Carlo
-
Pavilion 17 e020us: no internet connection after upgrading to Windows 10
Hello guys,. I have a problem with the internet connection. My computer started to upgrate by itself for 10 windows while I did other work at my home. I was waiting until he finished. When it's done I realized that I have no internet, not only my wir
-
HP ENVY 17-j053ea Notebook PC: windows post 10 install; touchpad does not work!
Hello I pray that someone can help me. Brought my HP ENVY 17-j053ea Notebook PC early 2014, work very well running windows 8.1. In the month of August / Sept upgraded to windows 10 and that s when the problems started. My touchpad has stopped working
-
Problem of Outlook Express Inbox.
When I send a message, it appears in my Inbox as well as in sent items. How can I stop happening, please?
-
photos of e-mail to win 8 Photo Viewer
How can I e-mail a picture of windows photo viewer 8, the message says that I need to create an association. I don't want to use skydrive to do what I don't want to upload my pictures anywhere. Thank you all