FIX for the problems of HP4500 ink cartridge!

Similar Questions

• I found the FIX for the problem of HP4500 ink cartridge!

  I had problems with my ink cartridge three colors... just like many others. After searching endlessly with no solution to the problem, I decided to take a flashlight and look inside the printer. What I found was a piece that had become crooked behind my color cartridge. It was a simple solution... I took a long thin to flat head screwdriver and pushed very GENTLY in place. I then ran a TEST PAGE and ALIGNMENT before I printed anything... it worked! Here is a picture I took before I did the setting of the insert on the left hand side, it's here that the color cartridge is going... If you notice, it appears to be crooked... he slipped easily right now in place. I've reintroduced the cartridges and closed the door. IMPORTANT * make sure that you unplug your printer before attempting to solve this problem * good luck and hope it's a permanent and not temporary solution

  Hi coolinutah,

  Thanks for the valuable information and goot to know that you were able to correct and solve the problem.

• Anyone know a fix for the problem of gel (Xoom)

  Hey everybody. Does anyone know a fix for the problem of gel in the Xoom? Once from time to time, it hangs for a few minutes, and then "goes back to work. It gets really annoying.

  Hey everybody. Does anyone know a fix for the problem of gel in the Xoom? Once from time to time, it hangs for a few minutes, and then "goes back to work. It gets really annoying.

  
  

  Greeting debuisson,

  Welcome to the Support Forums!

  Are you using the browser (Google) stock on a very regular or frequent basis? If Yes, brief gel is a known problem due to a memory leak in the stock browser that Google has not yet difficult (there are under all versions of Android OS to date). Basically, the continuous browser to consume your memory over time, based on the sites you visit and the length of time, it is active, which makes the system pause/freeze periodically. There are two ways to deal with this, either install a third-party browser (such as FireFox, Dolphin, Opera, Chrome, etc.) or if you really prefer the stock browser, restart your Xoom every two days (to clear/free memory and cache).

  Apart from the browser, a third party application of thugs can cause this as well (especially if there are conflicts). The rule of this point, try to use a surveillance (as SystemPanel) application to monitor what is active in memory when you encounter the gel. Close active applications one by one until your gel goes and then locate the updated versions.

  Please let me know what you find.

  -Doc

• Should rewards for the use of HP ink cartridges - [edited] - why I use genuine HP ink now? [redacted]

  I own a HP8600 OfficeJet Pro
  I've always used genuine HP ink cartridges. Several weeks ago, I received a HP dialog box telling me that I should be rewarded for it. HP has rewarded me with a cartridge cyan magenta yellow and black ink. It says click here to get your reward. When you click on, it opens a dialog box not descriptive that lead nowhere. There is no way to redeem this reward. I called HP eight times in the last two weeks, letters written to support, written letters to the President, which I have not received the answers whatsoever. [comment edited by moderator]

  Hi @FloydT ,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn about this here.

  Kind regards
  George

• Fix for the problems of release of WebHelp with IE 11 breaks search

  I use RoboHelp HTML 9 and you had problems with WebHelp generated in IE 11. The table of contents was completely empty and the 'Search' tab was going well, but have not worked. Everything worked fine in Firefox. After much research online and experimenting in these forums and elsewhere, I was able to get the table of contents to display properly in IE 11 (and Firefox), but the fix caused the Search tab to stop functioning in accordance with this other forum post RH9 Webhelp search function does not work properly.

  I need to have BOTH COT and research displays and works correctly but in order to get the table of contents displays correctly I had to change the preferred Format "Pure HTML" and, according to the above-mentioned position setting, it's what messes up the search function. is there a solution that will enable the TOC and research work properly?

  Here is a summary of the steps I took to get to this point:

  • Tested WebHelp output of two different projects myself so that the startup project Salesbuilder - all would display or function properly in Firefox but not in IE (empty TOC and non-functional research) 11.
  • Find a "patch" for RH10 exactly the problem I have experienced with RH9 but wasn't able to find a version for RH9. Since the patch included only 2 files (whutils.js and whver.js), I saved these files in the RoboHTML\WebHelp5Ext\template_stock directory and replace them with the new.
  • Regenerated one of my RoboHelp projects - still does not work in IE 11 and now does not work in Firefox either!
  • Tried to turn on mark of the Web but this did not help and did not allow for opening PDF that is necessary for one of the projects, I turned it again.
  • Change the preferred Format setting "Pure html" instead of "DHTML" and the table of contents displays and worked properly in 11 IE and Firefox! Hooray!
  • Celebrated for 10 seconds until I clicked on the "Search" tab and see the input box filled with letters of the alphabet with other random letters, words, numbers below. It looks almost like an index, but none of my projects using an index and I've not generated one or the other project.
  • Found the post mentioned above which States that the solution is to change the preferred Format of DHTML, but when I do this I am back empty TOC and look clean but non-functional search!
  • I have now deleted the search the output of one of the projects tab, it is not really necessary, but I need to find a solution for this for my other project.

  Two of my projects are run locally - it is documentation that is distributed on a CD release and the other is CSH, which is loaded on the local server with the software for which it was created.

  Dorothy

  Note to administrators: Sorry, but I posted this in response to a previous post , summary, Index, & Research do not appear in the generated... help -then perhaps it should be removed from this thread to avoid confusion.

  There is an official fix for RoboHelp 9 IE10. But who is unable to solve your problem. If you PM me, I can send you a pre-test to fix IE11 on RH9 to see if it works in your situation.

  The only real solution is probably to update RH11.

  Kind regards

  Willam

• Is the fix for the problems of WebHelp in RoboHelp versions 10 and 11 work when you access by using a Web server?

  I use RoboHelp 10 with the last fix of WebHelp.

  I copied files in the fix to the folder specified in the instructions, regenerated aid and tested my WebHelp on IE 8-11.

  Seen on the spot, the WebHelp output looks very good.

  Help is accessible by users of a web server, so I set up the output newly generated on our web server and tested the output and that's what I found:

  IE 8: Index and glossary are taking 3 or 4 seconds to load, which I guess I very well.

  IE 9: Index and glossary are taking 3-4 second to load. Index entries are too big and use a different font.

  That is to say 10: when you click a topic in the search pane, you get a blank page. When you click an entry in the Index, you get a blank page. After using the Index/Search and then go back to the content page, you get a blank page.

  That is to say 11: entry of Index are cut

  Has anyone else run these question? I can live with the questions about IE 09/08/11, but on IE 10 blank pages are unacceptable. If the fix is not resolved these problems or I do something wrong? Why the fix would work locally but not when accessed from a web server?

  Any info would be much appreciated.

  Thank you

  Mack

  Interesting. When you say the latest patch, which one is?

  (For an overv of all patches, see

  ( https://www.wvanweelden.eu/articles/robohelp-patches-and-updates)

  In IE10, see script errors? And if you press F12 to open the

  Console developer, it shows the errors/warnings?

  Kind regards

  Willam

• Does anyone know if HP or Microsoft has a fix for the problem with the microphone after installed win 7 own?

  I have a Pavilion 6700 AQuels came with Vista install that the HD has been replaced and installed Win7. Now the built-in microphones do not work on anything whatsoever.  Any help would be greatly appreciated.  Thank you.

  Paul

  Paul Merci much.  You know what I did?  Well, I went to Dev man and looked at the properties of its clicked on update driver card and found a driver Realtec and that fixes the problem.  Works fine now.  Yet once again I can't thank you enough your time a review on this issue.  Don't know if I'll have more questions, but I'll definitely stay here if I do.   ::) Paul

• Y at - it a fix for the problem of scrolling on a page opened in a page

  I can't scroll when I open a new window in a window, for instance: I log on a forum and use a keyword tool, it opens a Google serp that normally I can scroll... but FF it won't scroll... duplicate with Chrome open alongside it scrolls perfectly...
  I noticed that FF does not display the scroll bar on the side of rt when this happens, (made of Chrome).

  I have tried running in safe mode, going through some config suggestions..though they were probably outdated...this happens in  other similar situations...
  

  When it happens... FF does not display the scroll... bar still will of Chrome

  I use macbook os 10.6.8

  It's not intermittent...

  Have you ever used this forum successfully in a previous version of Firefox, or is this your first time using Firefox with this forum? (Trying to figure out if it is a new issue, focused on the upgrade.)

  I think I saw a similar question "missing vertical scroll bar" in another thread, but I'm not.

  Some pop-up windows disable the scroll bars. You can block them to do by changing a setting in Firefox about: config preferences editor.

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste the scroll bar and take a break while the list is filtered

  (3) double-click dom.disable_window_open_feature.scrollbars to return true.

  If pop you back to the top of the window, does make a difference? Otherwise, there could be something on the page code that does not work on Firefox. Hard to know without seeing first-hand.

• y at - it a fix for the problems of compatibility for windows Vista when you try to install windows 95/98 games?

  just replaced an old unit under xp home which took place games supporting windows 95/98, new unit has windows Vista and will not load these games.thanks for any help.

  Hello

  Have you tried compatibility mode?

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• Inkjet pro 6830: printer does not except off the coast of brand ink cartridges.

  I bought a new pro 6830 2 years and it was recalled for replacing head inkjet printer. Since I received

  reconditioned replacement, it does not except other other than HP compatible ink cartridges. I hear here

  is going to be the fix for the problem. Is this true?

  Hi @79pinetree,.

  Thank you for joining the HP Forums!

  I understand that your printer HP Officejet pro 6830 does not except off the coast of brand ink cartridges. I am pleased to see that for you!

  Please see this post, dedicated to the best printing experience, of @Bill_F.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that answers your question!

• A fix will come out for the problems with the new OS update?

  A fix will come out for the problems... the beach ball twirling, which began with the new update for the OS?

  Writing an effective question of communities of Apple Support

• If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  Hi elvirkaric,

  Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

• Fix for common problems associated with Windows Update repeatedly trying to solve the same problem

  When the machine running Windows Update on a Windows XP Professional (SP3 with IE8), the information for the download of the ActiveX bar does not appear. Tried to run the Fix for "Common problems with Windows Update" and it says "Windows Update components must be repaired. Difficulty-it short, reports of success, "Found Themes" saying "one or more components of Windows Update are configured incorrectly". However, still unable to download updates from the information bar does not appear. Repeating the difficulty happens with exactly the same problem i.e. reports etc. but no success still can not download the ActiveX on Windows Update since the information bar never shows up.

  At tried all the suggested solutions I can find for the reported similar problems such as checking the downloads ActiveX security settings, reset Internet Explorer settings, and even resetting Windows Update (Articlce ID 971058) components. Still no luck. Therefore, I am unable to manually check and download updates of Windows security.

  Otherwise my PC works well. Norton Internet Security is installed but did not prevent Windows Update to work on another PC I have. The information bar appears sometimes for other downloads, and it doesn't seem to be a problem on the Windows Update page.

  Please can you help. Thank you.

  No, I'm not not first uninstall IE8 (or IE7) before proceeding with the repair facility...

  Long history, technical, short version: do not uninstall IE8 (and/or IE7) before doing a repair installation (Windows XP only!) leaves the two Internet Explorer and Windows in a State of "confused" or "broken". Your only recourse now is a clean install of Windows (after backup your personal data).

  No, another repair facility won't solve the problem - even if you uninstall IE8 beforehand.

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  PS: So that registry cleaners can solve some problems (temporarily, at least), they are not & cannot fix what caused the problem. Compare to treat a broken leg with a stick and a couple of BandAids.

• Someone at - it a fix for the slide show does not not in Live Mail 2009

  I searched Google and Microsoft and that you have not found a fix for a problem with the thousands or millions.

  The Microsoft Mr. Fix did not work or anthing else I tried.

  Live Mail is an E-MAIL program not an image viewer...

• I found the solution for the problem of sound-acpi with Satellite P100-219

  Hello

  I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?

  See you soon,.
  MIK

  Hi Mik

  As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.