I found the FIX for the problem of HP4500 ink cartridge!

Similar Questions

• FIX for the problems of HP4500 ink cartridge!

  I had problems with my ink cartridge three colors... just like many others. After searching endlessly with no solution to the problem, I decided to take a flashlight and look inside the printer. What I found was a piece that had become crooked behind my color cartridge. It was a simple solution... I took a long thin to flat head screwdriver and pushed very GENTLY in place. I then ran a TEST PAGE and ALIGNMENT before I printed anything... it worked! Here is a picture I took before I did the setting of the insert on the left hand side, it's here that the color cartridge is going... If you notice, it appears to be crooked... he slipped easily right now in place. I've reintroduced the cartridges and closed the door. IMPORTANT * make sure that you unplug your printer before attempting to solve this problem * good luck and hope it's a permanent and not temporary solution

  Hi coolinutah

  Thanks for the detailed post and photo

  

  Ciara

• Fix for common problems associated with Windows Update repeatedly trying to solve the same problem

  When the machine running Windows Update on a Windows XP Professional (SP3 with IE8), the information for the download of the ActiveX bar does not appear. Tried to run the Fix for "Common problems with Windows Update" and it says "Windows Update components must be repaired. Difficulty-it short, reports of success, "Found Themes" saying "one or more components of Windows Update are configured incorrectly". However, still unable to download updates from the information bar does not appear. Repeating the difficulty happens with exactly the same problem i.e. reports etc. but no success still can not download the ActiveX on Windows Update since the information bar never shows up.

  At tried all the suggested solutions I can find for the reported similar problems such as checking the downloads ActiveX security settings, reset Internet Explorer settings, and even resetting Windows Update (Articlce ID 971058) components. Still no luck. Therefore, I am unable to manually check and download updates of Windows security.

  Otherwise my PC works well. Norton Internet Security is installed but did not prevent Windows Update to work on another PC I have. The information bar appears sometimes for other downloads, and it doesn't seem to be a problem on the Windows Update page.

  Please can you help. Thank you.

  No, I'm not not first uninstall IE8 (or IE7) before proceeding with the repair facility...

  Long history, technical, short version: do not uninstall IE8 (and/or IE7) before doing a repair installation (Windows XP only!) leaves the two Internet Explorer and Windows in a State of "confused" or "broken". Your only recourse now is a clean install of Windows (after backup your personal data).

  No, another repair facility won't solve the problem - even if you uninstall IE8 beforehand.

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  PS: So that registry cleaners can solve some problems (temporarily, at least), they are not & cannot fix what caused the problem. Compare to treat a broken leg with a stick and a couple of BandAids.

• Does anyone has found a fix for the update of VISTA KB275842 error 80070490?

  Anyone found a fix for VISTA KB275842 error 80070490, or none of the solutions or help?

  80070490 ERROR_NOT_FOUND

  Corrupted system file

  You will need to perform an upgrade on the spot or reinstalling the operating system.

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files

  http://support.Microsoft.com/kb/929833>

  `~`

  If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt.

  The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update 80070490 error.

  To learn more about this tool, go to which is the analysis of system update tool? on the Windows website. http://support.Microsoft.com/kb/947821>

  If the system update readiness tool solves the problem, you will need repair Windows.

  Repair Windows will not damage your personal files or the programs that are installed on your computer.

  Once you have completed the repair, you will need to restart Windows Update to install updates are not included on the installation DVD.

  To repair Windows, follow these steps:

  1. Close all programs and restart your computer.

  2. Insert the Windows DVD into the drive of the computer. Wait for the installer to start. If the installation program does not start automatically, follow these steps:

     1. Click Start and type Drive: \setup.exe in the search box, where drive is the letter of the DVD drive of your computer (for example, D:\setup.exe).

     2. List programs, click Setup.exe.

  3. Click on install now.

  4. Click go online to get the latest updates for installation (recommended).

  5. If you are prompted to do this, type the Windows product key.

  6. What type of installation you want? window, click upgrade.

  7. Once the installation is complete, restart your computer, and then run Windows Update.

  `~`

  I hope that's enough to put you on the right path for nºw.

  Let us know how it works ºut.

  Good luck

  The current time and the date now in France is

  22:04

  Tuesday, March 26, 2013
  Central European time (CET) + 0100 UTC

  UTC/GMT is 21:04 Tuesday, March 26, 2013

  Current weather conditions in Paris

  Cloudy4 ° C / 39 ° F

• Lately, when I convert a Word document to pdf format, the pdf document is not the same, but it leaves out the parts of my Word document.  Do anyone know of a solution or fix for this problem?

  When I use Acrobat 9 to convert a Word file to pdf, the converted document does not match the original, but leaves rather parts of the original Word document.  Someone knows what to do?

  I found the problem and solved by changing the conversion of PDF from Adobe

  settings uncheck "enable accessibility and reflow with tagged Adobe."

  PDF. "Thank you.  John

  The game, 00:23, 2 July 2015, Anubha Goel [email protected]>

• Flash Player 11.3.300.262 works only with Firefox. I think I found the problem.

  * Flash Player 11.3.300.262 does not work with Firefox. I think I found the problem.*

  Millions of people got off work & turned on there computers recently to discover that Firefox isn't playing videos or flash content. Like me, millions of people are randomly searching the Internet in an attempt futile and frustrating response. Unfortunately, many of these people will simply stop using firefox & consider a browser glitch, unreliable.

  This happened to me a few days ago. I started my computer and got a pop-up from Adobe saying that I need to update my flash 11.3.300.262 drive. I always thought that Adobe as being a reliable software company, so I clicked on it with confidence that things will take care even more fluid. To my horror, I have relalized that just after the update, my main browser, firefox has been destroyed. Then I went on the frustrating process of uninstalling, reinstalling, running virus scan, search the Internet like a lost child. I thought, "this is why I hate the update of things, because the updates always seem to change things you don't want to change, and there always seems to be a problem with updates." I generally update software month after release, because microsoft & all other software vendors always seem to not test it stuff properly before releasing. We must look a glitchy computer until the next update fixes it. Well, that is my rant. Now, let me discuss the problem I found.

  Problem:

  What I did, go to my menu firefox extensions, I disabled the 11.3.300.262 & I have reactivated the previous flash player. After that, everything worked perfectly again. Then one today (a week later), I turned on my computer and my firefox wasn't playing videos or flash content again. I went into my menu parts of firefox again, and I discovered that my old flash drive has been removed & this 11.3.300.262 new glitch had been activated. Why adobe feel the need of in my computer & automatically delete and update my flash drive. Now, it does not work. It IS REALLY FRUSTRATING!

  The question that I discovered:

  "RealPlayer" is the most popular video show & it's installed on millions of computers. For some strange reason Firefox doesn't want its users to use Real Player. Specifically the RealPlayer Record Plugin 15.0.2. I also discovered that my Plugin 15.0.2 Record of the browser has been disabled automatically when the Adobe 11.3.300.262 is automatically updated too.

  -Maybe this could be because of some conspiracy of copyright law to stop people from downloading videos from the web.

  -Maybe firefox wants people to use it download add-on instead of RealPlayer downloader.

  I don't know what ther reason. But what I know is no one will remove it RealPlayer to computer there is just to use FireFox. We can just use Chrome or Internet explorer. I took advice of people with disabilities the Extention of RealPlayer, FireFox and Adobe. I also went in my RealPlayer preferences options, but there is no option to disable the download of FireFox for registration. BECAUSE I have ALREADY DISABLED THE add-on menu FireFoxes.

  Solution:

  Step 1: Adobe needs to update all computers with the previous flash player. In this way we can choose to activate the previous flash player in our FireFox. or wait for a new update fixes the problem with firefox.

  Step 2: Adobe & FireFox need to get together and go back to the drawing board. They need create an update that actually works on computers with of Real Player installed on them. I don't like that the company made the update. All I care about is if it works. Thank you.

  Oh yes, Im market FireFox 13.0.1, Windows 7, computer HP, Real Player is up-to-date.

  FirefoxAdobeNotWorking wrote:

  We all that business leaders like every penny of profit and there ready to layoff anyone to keep this benefit. Suffice to say.

  Mozilla is a not-for-profit organization, and Adobe will not loose anything if you switch to chrome or IE.

• Windows crashes software when it cannot verify the Publisher * found the problem

  * Found the problem, thank you anyway

  I use Windows XP and IE8, and I am trying to allow the installation of ActiveX controls.

  I get the following warning of safety and error: "Windows has blocked this software because it can't verify the Publisher.

  To protect your computer, Windows crashes software when it cannot verify the Publisher. »

  I have read a dozen forums and tried all the tips. I don't know what I'm doing wrong.

  I tried going into the tools of IE tab and changing the security options to "allow software to run or install even if the signature is not valid.

  I unchecked the boxes to "verify signatures.

  I passed the security settings and select: fast for "Unsigned download Active X controls" and: ask the user 'initialize and script ActiveX controls not marked as secure..'  and 'activate' to 'run ActiveX controls '.

  I even added the IP domain in my zone of confidence and lowered my security level to 'low '.

  I also remembered to close and restart IE.

  I always get the error message when you try to leave the site to install ActiveX. controls.  FYI the ActiveX is remote viewing of a security camera.

  If anyone has any other clues that could help me with this problem I would be very grateful.

  Fancy

  Thanks James, but I found the problem.  There was an extra box that I neglected to "verify" that allowed to install unsigned files.  I thought I had checked and unchecked everything related but I missed a.  Scary lengths windows go to protect me! :)

  Fancy

• When I connect to the internet, servads pop up. I ran malwarebytes anti malwalre and microsoft security analysis. Not found the problem of servads in their analyses.

  When I connect to the internet, servads pop up.  I ran malwarebytes anti malwalre and microsoft security analysis.  Not found the problem of servads in their analyses.  How can I get rid of the servads.

  Hello

  1. what web browser do you use?

  2 have had any changes made to the computer before the show?

  If you use Internet Explorer, please follow the methods.

  Method 1:

  If you see pop-ups suspicious, bars unwanted tools, redirects, strange results or other unexpected behavior on your computer, you may have been deceived by installing malicious software (also known as 'malware') on your computer. This behavior is known as the browser hijacking.

  To correct your hijacked browser I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:

  http://www.Microsoft.com/security/spyware/browserhijacking.aspx

  Method 2:

  Step 1:

  Start the computer in safe mode with network and perform antivirus analysis.

  See the link.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  Perform an online virus scan.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 3:

  Follow the steps in the link.

  http://Windows.Microsoft.com/en-NZ/Windows7/Internet-Explorer-pop-up-Blocker-frequently-asked-questions

  Method 4:

  optimize Internet Explorer and check.

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/936213/ro

• Inkjet pro 6830: printer does not except off the coast of brand ink cartridges.

  I bought a new pro 6830 2 years and it was recalled for replacing head inkjet printer. Since I received

  reconditioned replacement, it does not except other other than HP compatible ink cartridges. I hear here

  is going to be the fix for the problem. Is this true?

  Hi @79pinetree,.

  Thank you for joining the HP Forums!

  I understand that your printer HP Officejet pro 6830 does not except off the coast of brand ink cartridges. I am pleased to see that for you!

  Please see this post, dedicated to the best printing experience, of @Bill_F.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that answers your question!

• I've recently upgraded to Windows7, now I'm unable to locate the Toolbox of printer (ink cartridge levels).

  I've recently updated to Windows7, now I'm unable to locate the Toolbox of printer (ink cartridge levels)

  original title: the printer toolbar

  Download the right driver Windows 7 from here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3192753

• Does anyone has found a fix for the black screen of death on Mass Effect 3 on Xbox 360?

  My game Mass Effect 3 crashed on Xbox 360.  It freezes and becomes a black screen of death just prior to the start menu.  For some reason, is that xbox live associated profile.  It works on any profile other than the one I used and played through all 3 games.  I spent an hour and a half with xbox live support and they could not solve the problem. They also recognized that I'm not the only one with this problem.  We tried to remove and reinstall my profile, I downloaded my profile on the hard drive of my another xbox 360 console without result. We also moved all the parties backed up to the cloud and remove all content of Mass Effect 3, still no luck. They suggested that I come here and try to find answers and start a rallying cry for a patch to fix this problem.  It's extremely frustrating after playing every game Mass Effect 3 thanks to several times that all of my choices and just saved games be erased by a stupid bug in the game.  I have hundreds, if not thousands of hours invested in the series.  I don't want to start over with Mass Effect 1 and play through it again on a new profile.  Who can say this bug won't happen on my new profile anyway?  Please, if anyone else has this post problem here if you have resolved, or simply to add your voice to those who need this fixed a bug.  Thank you.

  Hello

  This forum is supported only for the Windows operating systems (have no idea why they told you to come here), so I suggest you to stay in touch with Xbox support.

  XBOX support:
  http://support.Xbox.com/en-us/games/browse#games%2Fpc-games%2FNavigationList {2} Ms

• After having revoked public UTL_FILE, found the problem...

  Hi all

  I created the new role that is 'UTL_PUBLIC' and issued under package to new role and the new role of grant to all users in the database after revoke under PUBLIC roles.

  UTL_FILE

  UTL_TCP

  UTL_SMTP

  UTL_HTTP

  DBMS_LOB

  DBMS_SQL

  DBMS_JOB

  DBMS_SCHEDULER

  DBMS_XMLGEN

  But I had the problem when the export data that show any packet error. So I granted above package back to PUBLIC and export again it's work.

  My question is can I give above package again role and grant the user db instead of PUBLIC role? If so, how do I do? If no, please explain why.

  Thank you

  Hiko

  Support of Oracle confirmed on this subject already.

  I can't grant the privilege to execute on these packages through roles that will have trouble with procedures and packages.

  Only one solution, I have to give the users directly.

  Thank you

  Hiko

• OfficeJet 4630: brand new officejet 4630 with the problem of black ink and ok button does not work

  Hello! Today, I bought a new printer, officejet 4630 and it included ink cartridges in the box.

  ISET it upward as the sheet in the box said. After I had filled in date etc, I put in the ink (and Yes, remember to check it was compatible and take the Ribbon), then this message showed on the screen and still doesn't work:

  "Problem of ink cartridges. The following ink cartridges need to be replaced"and a black dot.

  The cartridges were brand new and came in the same area as the printer.

  I tried a reset (taking the power cord, wait 60 s etc) I saw in the Hp support you need to press 'ok' to get rid of the message before restarting. I can't press ok. It sounds right. I press any button.

  Suggestions? Of course, I can try it with a new cartridge, but to pay $20 for a new cartridge, when it was included in the box and should work is not correct.

  Hi @Candykuma,

  Welcome to the HP Forums!

  I understand that you ar get the error, the "problem of ink cartridges. The following ink cartridges need to be replaced"with your black cartridge on your printer HP Officejet 4630. I am pleased to address this error of cartridge for you!

  Please, try the steps in this guide, a "missing cartridge", 'cartridge problem,' or 'not compatible ink cartridges' Message error for HP Officejet 4630 and HP Deskjet Ink Advantage 4640 e-all-in-one printer series.

  If this guide does not solve your problem, please Contact HPtelephone support for further assistance, as the ink cartridges are under warranty. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• desckjet 2542: the problems of black ink

  I have a deckjet printer 2542 and I try to print the text and photo on HP 120 g/m2 glossy paper and black ink does not dry. Also, I try on paper HP photo, with the same results.

  I use hp61 cartridge, what can I do?

  Thank you, Walter

  Hi @waltherz,

  Welcome to the Forums of HP Support! I understand that the black ink is not dry when printing on glossy paper HP photo paper HP. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Make sure the 2542 Deskjet is set as the default printer and not the driver of Windows preinstalled.

  Make sure the printer driver is correctly selected for the media type, paper size, and quality.

  HP Deskjet 2540 and Deskjet Ink Advantage 2545 all-in-One Printer Series - print Photos stored on your computer (Windows).

  If you're still having problems, try the steps listed in this document, a "Incompatible cartridge or"lack of ink cartridges"Error Message appears for the all-in-one HP Deskjet 1510 and 2540. " Do not take into account the title. They should help this situation.

  Please let me know the results and if there is anything else I can help you. Thank you.

• Conclusions on the (empty) replacement? Ink cartridges for OfficeJet 8600 N911g

  I would like to note some interesting conclusions on the replacement of "Setup cartridges.

  The printer has reported that the black ink was out and needed replacement.  It really has not reported the CMY cartridges also outside, even if they were low.  Oddly however, the printer continued printing in any case, even if the text was black.

  When I replaced it with the full k cartridge, suddenly C cartridges and there were empty!  The M cartridge gave a level showing approximately a 1/8th.

  So I removed the full k cartridge and handed in the (almost emplty?) 'installation type' K cartridge: there was still a bit of reading level K, but now all the cartridges C, M and there were empty!  What was going on?  Nothing in the M cartridge has been used, and all of a sudden it was empty?

  Okay, okay.  I accept the high probability that when a cartridge is empty, all others probably get nearly empty too.  I won't have to be wary as a great many people that the printer has the ability to detect a cartridge Exchange (from vacuum full for) and therefore on the alert to create a user change as the rest of the cartridges, regardless of the level of ink.  It is probably the case that all cartridges must be turned on outside.

  However, these experiments show that the ink level detection technology has a worse quality than the ability of the first Kia or Hyundai models at different levels of meaning fuel in the tank.  How long have you been at the forefront of the HP inkjet technology?  Decades now?  And you're telling me that a magenta cartridge that was not detected in the vacuum cartridges K switched again (full) to the old (almost empty) again (full) back again, and now all color cartridges are felt as empty?

  I'm glad that I'm not a suspicious person, HP, or I might be inclined to believe that something funny is going on.

  There are a few other (unofficial?) HP support forum and I read dozens of messages from OJ8600 (N911g) owners, saying that he would be their last HP product.  I hope that I have misunderstood them.  After all, I'm not a suspect.

  There is a boot process when a new cartridge is installed to remove the air from the print head.  He began all colors and blacks whenever a cartridge is changed.  If a cartridge is almost empty and a different cartridge is replaced the boot may cause this cartridge should now appear as low.

  I suggest running the printer until it refuses to print as a cartridge becomes really empty, then replace all of the cartridges that are both low.

  Initial depression on the ink indicator is defined before the cartridges actually run out of ink to give you time to buy a replacement. You have no need to replace the cartrdiges until they are actually exhausted.