Anyone know a fix for the problem of gel (Xoom)
Hey everybody. Does anyone know a fix for the problem of gel in the Xoom? Once from time to time, it hangs for a few minutes, and then "goes back to work. It gets really annoying.
Hey everybody. Does anyone know a fix for the problem of gel in the Xoom? Once from time to time, it hangs for a few minutes, and then "goes back to work. It gets really annoying.
Greeting debuisson,
Welcome to the Support Forums!
Are you using the browser (Google) stock on a very regular or frequent basis? If Yes, brief gel is a known problem due to a memory leak in the stock browser that Google has not yet difficult (there are under all versions of Android OS to date). Basically, the continuous browser to consume your memory over time, based on the sites you visit and the length of time, it is active, which makes the system pause/freeze periodically. There are two ways to deal with this, either install a third-party browser (such as FireFox, Dolphin, Opera, Chrome, etc.) or if you really prefer the stock browser, restart your Xoom every two days (to clear/free memory and cache).
Apart from the browser, a third party application of thugs can cause this as well (especially if there are conflicts). The rule of this point, try to use a surveillance (as SystemPanel) application to monitor what is active in memory when you encounter the gel. Close active applications one by one until your gel goes and then locate the updated versions.
Please let me know what you find.
-Doc
Tags: Motorola Phones
Similar Questions
-
Anyone know how to solve the problem, when he says scratch disk is full?
Anyone know how to solve the problem, when he says scratch disk is full? don't do anything :/
Go to Edition > purge > all
This will clear all of your history and Clipboard, thus freeing the scratch disk space.
-
I have a Pavilion 6700 AQuels came with Vista install that the HD has been replaced and installed Win7. Now the built-in microphones do not work on anything whatsoever. Any help would be greatly appreciated. Thank you.
Paul
Paul Merci much. You know what I did? Well, I went to Dev man and looked at the properties of its clicked on update driver card and found a driver Realtec and that fixes the problem. Works fine now. Yet once again I can't thank you enough your time a review on this issue. Don't know if I'll have more questions, but I'll definitely stay here if I do. ::) Paul
-
I use RoboHelp 10 with the last fix of WebHelp.
I copied files in the fix to the folder specified in the instructions, regenerated aid and tested my WebHelp on IE 8-11.
Seen on the spot, the WebHelp output looks very good.
Help is accessible by users of a web server, so I set up the output newly generated on our web server and tested the output and that's what I found:
IE 8: Index and glossary are taking 3 or 4 seconds to load, which I guess I very well.
IE 9: Index and glossary are taking 3-4 second to load. Index entries are too big and use a different font.
That is to say 10: when you click a topic in the search pane, you get a blank page. When you click an entry in the Index, you get a blank page. After using the Index/Search and then go back to the content page, you get a blank page.
That is to say 11: entry of Index are cut
Has anyone else run these question? I can live with the questions about IE 09/08/11, but on IE 10 blank pages are unacceptable. If the fix is not resolved these problems or I do something wrong? Why the fix would work locally but not when accessed from a web server?
Any info would be much appreciated.
Thank you
Mack
Interesting. When you say the latest patch, which one is?
(For an overv of all patches, see
( https://www.wvanweelden.eu/articles/robohelp-patches-and-updates)
In IE10, see script errors? And if you press F12 to open the
Console developer, it shows the errors/warnings?
Kind regards
Willam
-
I found the FIX for the problem of HP4500 ink cartridge!
I had problems with my ink cartridge three colors... just like many others. After searching endlessly with no solution to the problem, I decided to take a flashlight and look inside the printer. What I found was a piece that had become crooked behind my color cartridge. It was a simple solution... I took a long thin to flat head screwdriver and pushed very GENTLY in place. I then ran a TEST PAGE and ALIGNMENT before I printed anything... it worked! Here is a picture I took before I did the setting of the insert on the left hand side, it's here that the color cartridge is going... If you notice, it appears to be crooked... he slipped easily right now in place. I've reintroduced the cartridges and closed the door. IMPORTANT * make sure that you unplug your printer before attempting to solve this problem * good luck and hope it's a permanent and not temporary solution
Hi coolinutah,
Thanks for the valuable information and goot to know that you were able to correct and solve the problem.
-
Fix for the problems of release of WebHelp with IE 11 breaks search
I use RoboHelp HTML 9 and you had problems with WebHelp generated in IE 11. The table of contents was completely empty and the 'Search' tab was going well, but have not worked. Everything worked fine in Firefox. After much research online and experimenting in these forums and elsewhere, I was able to get the table of contents to display properly in IE 11 (and Firefox), but the fix caused the Search tab to stop functioning in accordance with this other forum post
.I need to have BOTH COT and research displays and works correctly but in order to get the table of contents displays correctly I had to change the preferred Format "Pure HTML" and, according to the above-mentioned position setting, it's what messes up the search function. is there a solution that will enable the TOC and research work properly?
Here is a summary of the steps I took to get to this point:
- Tested WebHelp output of two different projects myself so that the startup project Salesbuilder - all would display or function properly in Firefox but not in IE (empty TOC and non-functional research) 11.
- Find a "patch" for RH10 exactly the problem I have experienced with RH9 but wasn't able to find a version for RH9. Since the patch included only 2 files (whutils.js and whver.js), I saved these files in the RoboHTML\WebHelp5Ext\template_stock directory and replace them with the new.
- Regenerated one of my RoboHelp projects - still does not work in IE 11 and now does not work in Firefox either!
- Tried to turn on mark of the Web but this did not help and did not allow for opening PDF that is necessary for one of the projects, I turned it again.
- Change the preferred Format setting "Pure html" instead of "DHTML" and the table of contents displays and worked properly in 11 IE and Firefox! Hooray!
- Celebrated for 10 seconds until I clicked on the "Search" tab and see the input box filled with letters of the alphabet with other random letters, words, numbers below. It looks almost like an index, but none of my projects using an index and I've not generated one or the other project.
- Found the post mentioned above which States that the solution is to change the preferred Format of DHTML, but when I do this I am back empty TOC and look clean but non-functional search!
- I have now deleted the search the output of one of the projects tab, it is not really necessary, but I need to find a solution for this for my other project.
Two of my projects are run locally - it is documentation that is distributed on a CD release and the other is CSH, which is loaded on the local server with the software for which it was created.
Dorothy
Note to administrators: Sorry, but I posted this in response to a previous post ,
-then perhaps it should be removed from this thread to avoid confusion.There is an official fix for RoboHelp 9 IE10. But who is unable to solve your problem. If you PM me, I can send you a pre-test to fix IE11 on RH9 to see if it works in your situation.
The only real solution is probably to update RH11.
Kind regards
Willam
-
FIX for the problems of HP4500 ink cartridge!
I had problems with my ink cartridge three colors... just like many others. After searching endlessly with no solution to the problem, I decided to take a flashlight and look inside the printer. What I found was a piece that had become crooked behind my color cartridge. It was a simple solution... I took a long thin to flat head screwdriver and pushed very GENTLY in place. I then ran a TEST PAGE and ALIGNMENT before I printed anything... it worked! Here is a picture I took before I did the setting of the insert on the left hand side, it's here that the color cartridge is going... If you notice, it appears to be crooked... he slipped easily right now in place. I've reintroduced the cartridges and closed the door. IMPORTANT * make sure that you unplug your printer before attempting to solve this problem * good luck and hope it's a permanent and not temporary solution
Hi coolinutah
Thanks for the detailed post and photo
Ciara
-
Following statements of:
http://www.Oracle.com/WebFolder/technetwork/JDeveloper/HOWTO/11114/managedserver/wlsadfms.html
On the ADR installation step:
"Note - * 11.1.2 Oracle ADF Application Development Runtimes are provided as a patch for the complete Oracle ADF Runtime and is available through the Support of Oracle." "Read the release notes for your specific version for more information."
I couldn't find under the stamp after several searches. Does anyone have any info on the installation of Runtime ADF 11.1.2.4 on weblogic 10.1.3.6?
Also, is there a way to install the runtime directly from JDev 11 g? It's a feature of JDev 10 g:
http://i.imgur.com/N6BQ4Gf.PNG
Patch numbers in my blog http://wp.me/pcBZk-7S
Timo
-
Y at - it a fix for the problem of scrolling on a page opened in a page
I can't scroll when I open a new window in a window, for instance: I log on a forum and use a keyword tool, it opens a Google serp that normally I can scroll... but FF it won't scroll... duplicate with Chrome open alongside it scrolls perfectly...
I noticed that FF does not display the scroll bar on the side of rt when this happens, (made of Chrome).I have tried running in safe mode, going through some config suggestions..though they were probably outdated...this happens in other similar situations...
When it happens... FF does not display the scroll... bar still will of Chrome
I use macbook os 10.6.8
It's not intermittent...
Have you ever used this forum successfully in a previous version of Firefox, or is this your first time using Firefox with this forum? (Trying to figure out if it is a new issue, focused on the upgrade.)
I think I saw a similar question "missing vertical scroll bar" in another thread, but I'm not.
Some pop-up windows disable the scroll bars. You can block them to do by changing a setting in Firefox about: config preferences editor.
(1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
(2) in the filter box, type or paste the scroll bar and take a break while the list is filtered
(3) double-click dom.disable_window_open_feature.scrollbars to return true.
If pop you back to the top of the window, does make a difference? Otherwise, there could be something on the page code that does not work on Firefox. Hard to know without seeing first-hand.
-
Occurs when you try to get on the internet with Internet Explorer, and many of my programs give the same error message when you try to open them. Some will be always open, but most will not.
Hi FermanHowell,This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.To resolve this issue, follow the steps listed in the article below: -
someone had a problem with professional portrait opening in photoshop cc 2015. When I open it with the plug-in, photoshop stops working (crashes)
Thank you, I have improved and the program works. Have a great Day.Joseph
-
just replaced an old unit under xp home which took place games supporting windows 95/98, new unit has windows Vista and will not load these games.thanks for any help.
Hello
Have you tried compatibility mode?
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
-
Anyone know if there is a problem with the "Windows Update" site? As of May 11, 2010 I could not access it for 2 days now. I get an error report indicating that he has a "problem with the site '... Not sure if it's my computer or the site itself. I just need to check updates and download them. I would be grateful for any feedback... Thank you!
~ JeniferIt is without a doubt. There were a few patches published today, and I was able to update all my machines successfully. This looks more like a virus problem. Have you run a virus scan recently? Many times, if you are infected the virus will prevent you to access Windows Update.
You can also use Microsoft Fix It to reset the Windows Update components: http://support.microsoft.com/kb/971058. This could also be your problem.
Let me know how it goes,
Barbara
-
Does anyone has found a fix for the update of VISTA KB275842 error 80070490?
Anyone found a fix for VISTA KB275842 error 80070490, or none of the solutions or help?
80070490 ERROR_NOT_FOUND
Corrupted system file
You will need to perform an upgrade on the spot or reinstalling the operating system.
Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
http://support.Microsoft.com/kb/929833>
`~`
If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt.
The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update 80070490 error.
To learn more about this tool, go to which is the analysis of system update tool? on the Windows website. http://support.Microsoft.com/kb/947821>
If the system update readiness tool solves the problem, you will need repair Windows.
Repair Windows will not damage your personal files or the programs that are installed on your computer.
Once you have completed the repair, you will need to restart Windows Update to install updates are not included on the installation DVD.
To repair Windows, follow these steps:
Close all programs and restart your computer.
Insert the Windows DVD into the drive of the computer. Wait for the installer to start. If the installation program does not start automatically, follow these steps:
Click Start and type Drive: \setup.exe in the search box, where drive is the letter of the DVD drive of your computer (for example, D:\setup.exe).
List programs, click Setup.exe.
Click on install now.
Click go online to get the latest updates for installation (recommended).
If you are prompted to do this, type the Windows product key.
What type of installation you want? window, click upgrade.
Once the installation is complete, restart your computer, and then run Windows Update.
`~`
I hope that's enough to put you on the right path for nºw.
Let us know how it works
ºut.Good luck
The current time and the date now in France is
22:04Tuesday, March 26, 2013
Central European time (CET) + 0100 UTCUTC/GMT is 21:04 Tuesday, March 26, 2013
Current weather conditions in ParisCloudy4 ° C / 39 ° F -
In Windows 8, all my video files (is a mod and.) MOD) show a generic icon of MPEG and NOT a preview of the image. does anyone know a fix? All my photos preview very well but the videos are not.
I have the same problem with. Recording with my camera JVC Everio MOD files.
The problem is that. MOD files. All thumbnails of film appears correctly.
I have not had the problem on Windows 7, but my new 8.1 Windows based PC does not display thumbnails for previews. MOD files... but the other movie previews shows correctly. 'Show thumbnails instead of icons' is checked.
Can anyone help?
Maybe you are looking for
-
How to remove the supervisor on CT 100 password?
I want to remove my supervisor password, because I remember can´t. What should I do?
-
Re: Tilda and Windows Vista (Satellite L40 - 17R) keyboard key
Hello... I have a problem with my laptop Satellite L40 - 17R. I've updated from Windows XP to Vista Business. Almost everything works fine, but I noticed that the Tilda key (~) does not work! the key does nothing. I changed the keyboard layout to a l
-
HP Officejet Pro e-all-in-8610: scan to email
I got my printer put in place so that I could scan something to my personal e-mail but my password recently changed on my email account, so it is no longer lt me scan. When I try it says the password is incorrect, but I can't understand how to chang
-
I GET MESSAGE FOLLOWING [Error number: 0 x 80240036] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Question
-
E230 series, re-furb, guard turn
Hey guys! New to the Forum!I had my series e230 for probably a decade. I had all kinds of insects of the screen white death for ghost files and been able to fix them all until what it struck again.Everything started when I listened to the music, she