Text of Center with the image next to it.

Similar Questions

• How to set the text to the center of the image and keep it responsive

  Hi, I'm new in Muse so Hello everyone

  I created a large image and add the text object that I placed in the Center. I have setup the image and width sensitive.

  Keep what reduction in size of the sensitive image browser, but the text is now high position relative to the browser.

  My question is how do you tell the text object to hold the center of the image? (As rather pin to pin object browser)

  Thank you

  I found this one:

  Text the PIN in the center of the image when using fluid width

  He answered my question but not yet a reasonable solution. Muse should allow us to group objects even with width and high sensitive. Another way is to allow pin object to.

• How to get the text to change with each image in the slideshow base

  Hi, I'm putting the different positions and text on three different images. When I saw the text just remains the same.  I tried to change individually, but it doesn't seem to work. I took images in Photoshop and make all the same size with compensation for the text to be included later in the Muse. Then I loaded the three images in the slide show and thumbnail to bring the image before and at the Center. But regardless I the title and text appear unchanged, even if the changes to the image.  I don't know what to do with the image and text together in Photoshop would do anything for type resolution when it was introduced to the Muse.  Any ideas please.  I enclose the schema where I wish to address three different types of job seeker.

  Hi brush them... you have checked the title text on your widget option?... Try again with different slidshows which shows the option.so of text you can add the text you want in each image/trigger...sorry my English and I hope to help you

• "Draw the fate-in" function fills the erroneous part of the text with the image.  How to reverse?

  Hi there and thanks for the help in advance!

  I used a font called "postcard from holidays NF.  (Police of holiday card mailing NF by Nick Fonts - FontSpace)

  I'm trying to put an image in the white part of the police, but when I use the function "match zero" and place the image, it fills in the black part of the police instead, that I would stay black.

  How to choose the other portion of the police (white part) to be filled with the image?

  Here is an example of what happens.  Thanks again!

  

  For a policy like that, you will need to separate forms of letter (white) from their shadows. It will, therefore, describe the type and transparent records release.

  A new compound of all the white letters and use it as a clipping mask.

• My tags and labels will remain with the images when I move them to a new computer?

  I want to assure you that if I take the time to enter the tags and labels for my images, these data will move with the images of my next computer.

  Hello

  I would ask you to view the query in the forum of photo gallery for more assistance.

  Reference:

  http://answers.Microsoft.com/en-us/windowslive/Forum/Gallery

  Thank you.

• My tools do not work in the center of the image

  My tools, spot healing, radial, grad and brush do not work in the center of the image. Near the edges, I see them as I propose in the Center, they disappear.

  It's in Lightroom cc cannot begin to understand why, not so no idea how to solve this problem. All ideas

  Yosemite with a Macbook pro not retina

  Began to make any reply. I closed Lightroom and reopened. Seems to have solved the weird though problem?

• Find dpi & Align center of the Image

  Hi all

  I have new request, but struggling in the points below:

  1. find less than 300 dpi image in the active document

  2. create the text block and set the center of the image vertically and horizotally.

  Hope that I finished the script of 90%

  Finished the Script:

  var myGraphics = app.activeDocument.allGraphics;
  var targetResolution = 300;
   for (var i = 0; i < myGraphics.length; i++) {
      try
      {
      if (myGraphics[i].effectivePpi[0] < 300) {
          var myPPI = myGraphics[i].effectivePpi[0] + " dpi"             //please ensure this line should be correct
          var myName = myGraphics[i].itemLink.name;
          var myPage = myGraphics[i].parentPage;
  
          var myCaption = myPage.textFrames.add();
          myCaption.textFramePreferences.verticalJustification = VerticalJustification.TOP_ALIGN;
          myCaption.contents = "FPO\r" + myName + "\r" + "Low Res " + myPPI;
  
          var bnds = myGraphics[i].parent.visibleBounds;
          myCaption.visibleBounds = [bnds[2] + 3, bnds[1], bnds[2] + 6, bnds[3]];
  
          myCaption.fit(FitOptions.FRAME_TO_CONTENT);
  
          try {
              var myPStyle = app.activeDocument.paragraphStyles.add({name: "Caption_lowres", justification: Justification.CENTER_ALIGN});
  
          } catch (myError) {
                myCaption.parentStory.appliedParagraphStyle = app.activeDocument.paragraphStyles.item("Caption_lowres");
             }
          myPage.groups.add([myCaption, myGraphics[i].parent]);
      };
  }
  catch(myError)
  {
      }
  };
  

  POWER REQUIRED

  

  But using the current above script output

  

  Thank you

  Beginner_X

  Hi all

  I found the answers in a different way...

  Thanks to the forum and Mr.Dave

  var myGraphics = app.activeDocument.allGraphics;
  for (var i = 0; i < myGraphics.length; i++) {
          var myPage = myGraphics[i].parentPage;
          var myCaption = myPage.textFrames.add();
          var bnds = myGraphics[i].parent.visibleBounds;
          myCaption.visibleBounds = [bnds[2] + 3, bnds[1], bnds[2] + 6, bnds[3]];
          myCaption.contents = "FPO\r";
          myCaption.fit(FitOptions.FRAME_TO_CONTENT);
  
          app.select([myCaption, myGraphics[i].parent])
          app.activeDocument.align(app.activeDocument.selection, AlignOptions.TOP_EDGES, AlignDistributeBounds.ITEM_BOUNDS);
          app.activeDocument.align(app.activeDocument.selection,AlignOptions.VERTICAL_CENTERS, AlignDistributeBounds.ITEM_BOUNDS);
  
          var myPageGroup = myPage.groups.add([myCaption, myGraphics[i].parent]);
       };
  

  Thank you Forum

  Beginner

• Remove the play button in the center of the image

  Hello

  Excuse me for my English, English French by Bing translation.

  Captivate 5.5

  I created a project:

  Playback bar: I changed the colors.

  Project > Preferences: not AutoPlay, but I put an image.

  Beginning and end > stop.

  When you run the project, there is a "play" button in the center of the image. Is it possible to delete or hide this button and start to read only the button of the PlayBar?

  If necessary I would put screenshots

  Thank you very much for your answers.

  Hello to all and good night to the time difference

  Thank you for your answers and I examined my project.

  Captiv8r made me think to click on areas. I have inserted a visible click box, and then select pause. She is more beautiful with the image, but the main thing is the demonstration in which the first slide has 4 click boxes that refer to the chapters.

  Why make it complicated it was simple, I'm

  Captivate is a great tool, but I am a beginner.

  I consider that my topic as solved.

• PES 9 - unique printing center of the image

  Hi - I'm having a problem with printing some JPEGs in PSE 9.  I actually try to use a virtual "printer" pdf to convert a jpeg file to the pdf format (I'm trying to finally merge multiple JPEG files in a final pdf file if I want to convert JPEG files and use a third-party software to perform the merge).  The jpeg format, I am trying to convert is larger (size wise) so I resized it so that it develops on a normal paper.  However, when I go to 'print', only the center of the image is printed, despite the fact that the preview seems perfect and "Crop to fit" is not checked.  Any ideas?  Thank you!

  Specify the correct paper size in the print dialog box?  Otherwise, I don't know about the problem of sizing.

  You don't have to print to a virtual printer to get a .pdf file.  You can use Save as... and select PDF.

  Jürgen

• Why is code to get the center of the image does not?

  Hey there. I'm trying to set up the center of the imags that load so that I can put them in the center of the stage. I do this each image is a different size.

  Here is the code that I learned to work before, but its doesn't now and I've been searching for what I've done wrong with no luck. : (

  Would watch you over and maybe you'll see what I'm doing wrong?

  public function placePicture(e:Event = null):void {
       rawImage = imageData.image[imgNum].imageURL;
       lastImageIndex = imageData.*.length() - 1;
                      
       imageLoader = new Loader;
       imageHolder = new Sprite;
       imageLoader.load(new URLRequest(rawImage));
                                
       imageLoader.x -= imageLoader.width/2; //this should set the image to the center no?
       imageLoader.y -= imageLoader.height/2;
       imageHolder.x = 640; //this is the center of the stage
       imageHolder.y = 100;
       imageHolder.addChild(imageLoader);
       masterHolder.addChild(imageHolder);     
  }
  

  The result when I publish is the image comes on stage, but the upper left corner goes to 640 instead of the center of the image to 640.

  I tried several variations of this all with the same result:

  imageLoader.x = - 1 * imageLoader.width / 2;

  I tried to use setRegistrationPoint with the following tutorial: http://flashscript.ca/set-registration-as3.php

  and I tried to do all this by inserting the charger in a sprite and then in applying the code to the sprite and then adding only another sprite sprite and put to 640 and inserting is not in another sprite and trying to right set up the existing 640 sprite (I hope that all the senses). And I tried to put width/3 and nothing else happens.

  If you have other ideas or you can see what I am doing wrong I would be really gratefull for some tips! : )

  Thanks for any help!

  Oh, and I'm getting no errors on it.

  width and height of the image are not available until the loading is complete.  That is to say, use a Headphone/Earphone full function.

• failure to communicate with the image drum?

  My m175nw is only 2 weeks... Everything worked great until I did the Firmware update.  Now, I get the following error and I think I printed only one (1) page since I bought this thing

  10.0004 power error
  10.1004 supply memory error

  There is a failure to communicate with the imaging drum.

  The update of the firmware was "2012-08-27, Version: 20120806, 10.28 M" and the error message

  10.0004 power error
  10.1004 supply memory error

  is the display on the printer control panel.   I was running Windows 7 (64 bit) at the time of installation, but I also have a system dual boot and can run MAC EVALUATE which the same message after restarting the printer.  Even with the computer turned off the M175nw displays the same error message.  As stated earlier, the printer is only 2 weeks, I think that I've printed 2 pages (with no problems) and the above-mentioned error did not appear after the update of the Firmware... I tried a reset to the default settings, but unfortunately that has no effect when the firmware has been updated.

• What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images?

  What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images? Missing images are not on my computer, but when the document opens the images are there. I can copy and paste the INDD images in Illustrator. Y files/images/I am able to copy and paste the images that have been incorporated into the INDD file in AI of the INDD file? If this is not what type of image am I copy and paste? Can I take the images that I stuck in there and place them in a new INDD document and have the images to reproduce without problems?

  The images could be anything - check the links Panel.

  What you see (and copy) is just the screen preview, not the actual image data.

• Still struggling with the Image and paper formats

  I use LR 5 on a Mac, and printing to a Canon Pro-100.  I have grown my image to 8 1/2 x 11.  In Page layout, I've selected 8 1/2 x 11 as my paper size and uses Board single image/contact for the page layout.  The smaller margins he will allow me are L, top, bottom =.25 and right =. 56.  The maximum size of the cells is 8,00 x 10.19.  I would like to fill the whole 8 1/2 x 11 paper with the image moins.25 inch border all around.  What I am doing wrong?

  Thanks for your help.

  My thanks to all who responded.  Very much appreciated.  I thought I had covered all the bases, but the problem is in the part of the Page Setup from LR.  Somehow the border right side had been incorrectly set.  I changed it a.25 and all is well.

  Happy holidays to all.

  Ken

• Is it possible to make a reflection of the image that will change with the image? [was: reflection]

  Is it possible to make a reflection of the image that will change with the image?

  

  I believe that a dynamic object will solve your problem.

  Place your original image to a new file as a smart object and do the same for reflection (made by processing, reducing the opacity and introduce a slight blur horizontal) on its own layer, then:

  by double clicking on the smart object in the layers panel and return to the original image, any change in the original and save, automatically update the vertical image and its reflection.

• Cut a circle from the center of the image?

  Hi all. I am a noob to photoshop but am learning fast. I'll have a little to hurt something I imagine most of you is quite straightforward. Help, please

  Basically, I have a square image (3000px x 3000px) and I want to cut an exact circle from the center of the image. So I choose the Ellipitcal selection marquee tool and put my cursor around in the center of the image, hold down the SHIFT and ALT, and then drag to the size of the desired circle. Then I press V to bring up the alignment toolbar hoping I could Center the selection to the exact middle of the image, but I can't. PS won't let me select alignment buttons. Please can someone tell me where I'm wrong?

  After that, I want to take the image of CUT and paste as a new picture, while I have just the circle and its content and no rectangular background. I don't know STICKING will do, but I can't get that much.

  Help, please

  Thanks in advance.

  One option:

  Elliptical selection tool

  Select > transform selection - enter the coordinates of the Center reference point the median point of the canvas.

  Make your cut or whatever.

  I am appalled by these fields coordinated not allowing a percentage (of a size of canvas) or simple to provide arithmetic expression. This seems like a basic functionality of conviviality that should have been years ago. Am I missing something?