Fix runtime error after trying to solve a problem of printer

Similar Questions

• How can I fix Runtime error R6034 associated with ITunes in Windows 7 than?

  How can original title - I fix Runtime error R6034 in Windows 7?
  I use Windows 7 Home Premium 64 - bit OS.

  I've never had this problem before... today, I opened iTunes and it prompted me to download the new version.  I use iTunes all the time and have updated several times without any problems.  During installation, it gave me an error message that says:

  Runtime error!

  Program C:\Program Files\iTunes.exe

  R0634

  An application has made an attempt to load the C runtime incorrectly library.

  For more information, contact the application support team.
  I leave the facility, uninstalled iTunes and rebooted my computer.  Now, I get a similar message with a slight difference:
  Runtime error!

  Program C:\Program Files (x 86)...

  R0634

  An application has made an attempt to load the C runtime incorrectly library.

  For more information, contact the application support team.
  I don't let anything go to the error message.  It does not point to a specific file, it ends only with "(x86)..." "Whenever I start my computer, this error message appears on my desktop.
  How can I fix this problem?  I found several solutions but am not sure which one is the best, and I don't want to try a bunch of different things for fear that I can make the problem worse.  I would try and it staring at me, if possible, but I need to know if this is really possible or if I have to take my computer to someone for repairs.  Any suggestions will be greatly appreciated!

  I checked this page https://discussions.apple.com/message/24611030#24611030 and it cleared up the problem, although I have not tried to reinstall iTunes - it installed on my desktop without a hitch and synchronize the iPad to that instead.  But it was very satisfying, removing every piece of software my laptop Apple.

• I tried to solve the problems to the existing solution in this forum. I still get error 50405

  Dear,

  I use USB-6009 for controlling pumps, valves, and two Mass Flow Control. Each two cycle I get error 50405. I tried to solve the problems in the existing solution in this forum, but the error always showing each cycle 2 of the operation. I enclose my VI filled for the expertise, I was wondering if its design issue? Home shot of the error screen. Thank you.

  You have certainly a few design issues.

  The structure of stacked sequence tends to create more problems than it solves. I the have not used in new programs since version 1.2 of LabVIEW (in 1989). A state machine is a much better choice of architecture.

  Local variables can cause race conditions, copies of additional data, poor performance and it is difficult to debug code. There are special cases when they should be used, but these conditions are not in your code. Just wire directly on the terminals of control at the scene, the data will be used.

  My guess on the likely cause of your error is the use of several DAQ Assistant to perform the same task (with different data values) in each image in the sequence structure. With the arcitecture state machine that I suggested above, you would need one. The DAQ Assistant trying to be clever on the configuration and tasks of closing, but different instances do not speak with each other, so they don't know when to release the resources.  You might be able to do work if you used the DAQmx screw standard you have done with the task of digital output.  You do not connect the error lines of the DAQ Assistant for you can be missing errors.

  Indicators and controls without legend may be a troubleshooting nightmare. Please give each control and seeing a unique label. If you don't want the visible label on the front, you can use the properties of the control to hide. If you want multiple controls to have the same visible text for the operator, use the legend.

  Learn how to use subVIs. Most of the code in the 6 images of the structure of internal sequence is identical. By converting only a Subvi, you would reduce considerably the size of the diagram and if you ever need to modify the code, it should only be changed in one place - the Subvi.

  The while loop in frame 0 of structure of outer sequence is a "gourmet" loop He's going to run as fast as possible and seize all available CPU resources until the user presses a button. Put a wait function (ms) in the loop with expectation of ~ 100 ms. best, learn how to use the Structure of the event for user input.

  The second loop inside of the structure cases inside does nothing and can be removed.

  Many of these objects suggest that you have a programming background using the text-based programming language.  LabVIEW uses a paradigm of data flow that avoids largely for things such as the structure of the sequence and the local variables. I recommend that you work through the tutorials online on the Getting Started with LabVIEW.

  Lynn

• Fix runtime error 216 at 03E61872

  starting the computer... when I try to fix runtime error 216 at o3E61872... I select Run type regedit... Count watch Devil Administrator regedit... give me a solution to slove this

  Hello

  1. are you able to boot to the desktop?

  If Yes, then I suggest you to follow these steps and check if that helps.

  Method 1:

  This error occurs if your computer has been infected by a Trojan SubSeven virus. I'll get to make a virus on your computer check to remove the virus.

  You can also try antivirus scan online currently running on the computer:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:

  You can also try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  If not, then start the computer in safe mode and check if you can start:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  It will be useful.

• Runtime error while trying to run prgram sample Login.java in order to establish the connection to the Hyperion workspace

  Hello

  I was able to set up compilation SDK and successfully the example program Login.java. But while trying to run it I get the following error: Please help me solve this problem.

  com.sqribe.rm.ReportMartException:GsmNotFound
  at com.sqribe.rm.SessionImpl.convertError (unknown Source)
  at com.sqribe.rm.AASessionImpl.open (unknown Source)
  at com.sqribe.rm.AASessionImpl.internalInit (unknown Source)
  to com.sqribe.rm.AASessionImpl. (Unknown source)
  at com.sqribe.rm.SessionFactory.getInstance (unknown Source)
  When connecting. (Login.java:28)
  at Login.main (Login.java:69)

  Hello

  Check if the GSM service is running. Also check if the user is able to access the workspace without any problem.

  Thank you

  Nirmala

• How can I fix runtime error: PROGRAM C:\PROGRAM Sony VAIO Gate\VAIO Gate.exe

  How can I fix runtime error: PROGRAM C:\PROGRAM Sony VAIO Gate\VAIO Gate.exe because of this my sometimes unable start system error & it takes a long time to start.

  Hi Shubham,

  Thanks for the post.

  Try the following steps:

  http://support.Microsoft.com/kb/929135

  If the problem persists, reinstall VAIO Gate:

  How do I reinstall applications packaged (https://us.en.kb.sony.com/app/answers/detail/a_id/32093/c/65%2C66/kw/32093)

  Enter the model # to locate VAIO Gate and its update:

  Drivers page

  Please indicate the solution as accepted, if you find this information useful.

  Kind regards

  Tony.

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Photo Gallery Windows keeps closing while the display or the setting of the photos. It is said that there may be a problem with the CODEC, but does not have an idea on how to correct or fix. Someone knows how to solve this problem, or what could be wrong?

  Ideas:

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello Susan4659,

  Thank you for your message.  Please see the link below, most likely you're trying to view photos taken with a camera that uses a specific format which is not standard with Photo Gallery.
  http://www.Microsoft.com/ProPhoto/downloads/codecs.aspx
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Printer Epson NX 415, get a message saying something on the refill cartridges, but even when I tried to solve the problem, I was unsuccessful.

  I have an Epson NX415 printer, the problem I have is my arer of ink cartridges not recognized or fake messages saying that I need to replace a particular cartridge is correct. I tried the Epson OEM cartridges as generic in all combinations without success. Sometimes, I get a message saying something on the refill cartridges but even when I tried to solve the problem I was unsuccessful. I have tried all troubleshooting solutions on Epson web site without success.  Help!

  I hate to say it, but if you can't get help from Epson, it's probably time to buy a new printer.  It's a printer hardware problem or a problem of printer driver, and the two of them come from Epson, not Ms.

  Good luck.

• Adobe Photoshop 13.0.1.3 issue error instalacion. Code of error: U44M1P7 Extension Manager 6.0.8 addition error instalacion. Code of error: U44M1P7.  How solve this problem?

  Adobe Photoshop 13.0.1.3 error instalacion. Code of error: U44M1P7 Extension Manager 6.0.8 addition error instalacion. Code of error: U44M1P7.  How solve this problem?

  Hello

  Please see Installation failed. Error U44M1P7 | Updates

  Hope that helps!

  Kind regards

  Sheena

• after scan direct I found 65 errors in the registry but essential security can not fix them. How can I solve these problems.

  my computer is going very slowly at the beginning how can I solve this problem

  my computer is going very slowly at the beginning how can I solve this problem

  What "live scan"?
  What is the full name of the "scan"?

  By chance, you used one of those in the registry of digitization net advertising to improve the performance of your computer?
  If so, it IS a SCAM.
  They just try to trick you into buying their products.
  Do NOT use anything that relates to your registry.

  What "security essentials"?
  Microsoft Security Essentials?
  If Yes, this is for the protedtion virus, is not to repair the operating system. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How to fix runtime error when you open a folder in windows xp

  I HAVE WINDOWS XP AND IE 8. HAPPENS EVERY TIME I OPEN A FOLDER OR AN IE BROWSER. SOME RUNTIME ERROR CODES ARE: RUNTIME ERROR 216 AT 004AD768, RUNTIME ERROR 216 AT 004ED768, RUNTIME ERROR 216 AT 009BD768. They vary, but they are basically runtime error 216.le does not when I open a program or application, just files and IE browsers.
  PLEASE RSVP AS SOON AS POSSIBLE.

  HOW I SOLVED IT:

  I have gived upward with this problem when I found a solution.
  I uninstalled IE8, restarted the PC,
  Initially, the problem continues, but after about 5 minutes with the PC and opening folders,
  then the Runtime error 216 has DISAPPEARED forever.
  I ve due to the help of Internet Explorer 6.
  However, I Don t know if the problem would be to reinstall Internet Explorer 8.
  THAT S THE WAY I SOLVED IT THIS HORRIBLE MISTAKE!
  Repeat the 3 steps:
  (1) uninstall IE8
  Reboot 2)
  (3) use PC normally, in a 15-minute error will disappear.
  Don't forget: Error 216 doesn´t dissapers inmediatelly.

• Print the following spooler & RPC:When instructions from Microsoft to correct the 0x000006ba error I then get error 1068. Have spent hours trying to solve this problem and support web Microsofts is not useful at all - please help - I just want to be able

  Print spooler 0x000006ba and 1068 error messages

  Try the instructions and links provided by the spirit in the following thread shows to see if they help (or differ from what you have already tried):http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/ef6ac932-a6cb-48cb-a56b-de5b1443df87.

  If this does not work, what is the manufacturer, the brand and the model of printer that you have (and all that you had previously installed)?  What version of Vista you have (for example, 32-bit Vista Business SP2)?  How the printer is connected (1 LPT, USB, ethernet, wireless, network,...)?  Please report the exact error messages you've been making word - that they can help us find the cause because there are reasons a bit that these things could happen and we have to understand the situation better than to offer a more targeted solution.  For example, what is a Lexmark printer (or have you ever had a Lexmark printer)?  There is a particular problem with these printers and a fix for the problem but I don't know if this is the case here and do not want to waste your time on something that does not apply.  There are other examples, as well.  We understand the situation, the better we can help you.

  I hope this helps.  If this isn't the case, please provide a lot of information that you can including the answers to all the above questions and anything else that you think might help.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to fix 'runtime error 364.

  Difficulties running a Linksys Router installation CD, get "run-time error 364.  How can I fix it... a program or utility that will solve the problem?  Running XP Professional.

  Try the Linksys support

  http://homesupport.Cisco.com/en-us/support?ICID=global-header-support-link

• BITS can not start (error 80246008), tried to solve it, received error 1079, please help.

  Hello

  I tried to update my windows service, but the BITS can not start (error 80246008). I tried to solve it using the suggested steps, however, got an error 1079 (account specified for this service is different from the account specified for other services running in the same process). I use Windows Vista Home premium version 6.0. Third-party antivirus software, I don't have online protection of Rogers. For the record, I'm not a technical person at all. Any help will be appreciated. Thanks in advance!

  I tried to solve it using the steps suggested,

  It's what you tried, if not, please do it might help

  See if anything here helps.

  Error 1079: the account specified for this service is different from the account specified for other services running in the same process

  If you receive this error message, follow these steps:

  1. Click Start, click Run, type services.mscand click OK

  2. double-click on Background Intelligent Transfer Service.

  3. click on the tab to open a session.

  4. click Local System account and then click OK.

  5. right click on Background Intelligent Transfer Service and then click Start.

  0 x 80246008 WU_E_DM_FAILTOCONNECTTOBITS A download manager operation failed

  because the download manager could not connect the smart Background

  Transfer Service (BITS).

  http://support.Microsoft.com/?kbid=910337>

  You receive an error message when you try to download updates from the

  Windows Update Web site or the Microsoft Update Web site, or when you

  try to start the Background Intelligent Transfer Service 0 x 80246008

  http://support.Microsoft.com/kb/916251>

  An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer

  http://support.Microsoft.com/kb/940520

  13:06:42 UTC 08/26/11