Fix the back up

Similar Questions

• After I print something, the back button disappears. How to fix? He's never done that with 3.5, but made with 4 or 5

  When you navigate around a site, if I stop and print a copy of a post or something after I'm done the back button no longer works and I have to exit firefox and go back and start over. As mentioned, that never happened with previous editions of firefox, but when I upgraded to 4.0, so I uninstalled and went back to 3.6 where the problem has disappeared. I upgraded to 5.0, the problem has been fixed, but it still happens hope. A way to solve this problem, in addition to return to 3.6? Thank you, Henry

  Try mode without failure of Firefox.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  1. You can open the Firefox 4, 5, 6, 7 SafeMode pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  2. Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox SafeMode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

• I can't understand how to access my Creative Suite cloud computer crash. I pay every month for the student version, but it is not let me re - download now that my computer is fixed and back.

  I can't understand how to access my Creative Suite cloud computer crash. I pay every month for the student version, but it is not let me re - download now that my computer is fixed and back. Looking for help.

  Unfortunately, I was unable to trace any CC with this identification code Adobe is there any other Adobe ID in which you have saved CC? Please let us know

  Concerning

  Stéphane

• Google web toolkit plugin for firefox (1.23) disables the back button of the browser. How do fix us this?

  I have Google Web Toolkit Developer Plugin for firefox (1.23). It worked for me, but I recently discovered that in my browser back button has been disabled. By trial and error, I discovered that it's the GWT developer Plugin that is the culprit. When I disable the plugin, the previous button starts working again. When I re - activate the plugin, the back button stops working. Has anyone else encountered this problem? My firefox is version 19.0. Anyone know what would cause the plugin to start to disable the back button?

  Have you tried to use Firefox 23? This is the version you should be running.

• How can I move the button reload of the page in firefox OSX for next to the back button where it was before I updated.

  How can I move the button reload of the page in firefox OSX for next to the back button where it was before I updated.
  I know there is an addon for windows Classic theme, but I need a fix for osx... its very frustrating when you update and things like this change and can be customized to the way we are used to using the browser. his counter intuitive to have the page button refresh so far from the back and home buttons.

  never mind, I found the preferences in the addon manager... Thanks again!

• How can I customize the navigation bar in Firefox 29? I wish I had the back refresh/stop button in front of the navigation bar!

  How can I customize the navigation bar in Firefox 29? I wish I had the back refresh/stop button in front of the navigation bar!

  One of the developers has been around the forum recently try to answer some of these questions then I quote the developer

  For the entire quote and useful links for corrections and explanations please see

  • Why did you change your design to new Firefox 29,0? /questions/998084 #answer - 566525

  Each setting you see in a computer program you use requires work; when a developer wants to build something new or improve something, he or she has to go through each related (hidden) setting and test if it still works like before and do that on each platform Firefox runs on. That's Apple's Mac OSX, various flavours of Linux and various flavours of Windows, including Windows XP. This costs time, lots of it, and that amount grows exponentially with each setting that's added. This comes on top of our work to continuously fix, improve and innovate Firefox.
  

• Whenever I try to click on the "back" button or the scroll bar, I get a popup asking me stupid questions, i.e.: Customize the toolbar / return reload etc how can I disable this gene

  When I click on the "back" button or the scroll bar with my mouse, I get a popup asking if I want to customize my toolbar back/reload/open (scrolling) or in a new window? I'm then cannot clear the pop-up window. How can I remove/fix this very annoying problem. I spend a lot of time trying to remove these popups and they keep recurring. No fix for that. I can't seem to find one in the preferences, and I'm starting to hate this OS because of this. Help!

  Please post a screenshot that shows what you hear. Please do not include personal information.

  Start a reply to this message. Drag the image file in the editing window downloading. Alternatively, you can include text in the response.

• What happened to the color of the Back/Forward/Refresh buttons?

  Hello

  With FF4 I noticed that you ripped us off on the color of the Back/Forward/Refresh buttons.  Right now I am trying very hard not to call you a bunch of baboons.  I don't see well and, to me, color is more important than discretion.  Can I get the color back?  Or better yet, can I import my own button icons?  Please fix this.--ckd
  

  You can change the colours using Firefox 3 theme for Firefox 4 theme - https://addons.mozilla.org/firefox/addon/firefox-3-theme-for-firefox

• 320 HP - 1190 has: the hp all-in-one (hp 320-1190 has) have they a vga to the back as Ive broken touch screen?

  I have unfortunately broken the touch screen on my disabled son all-in-one, I think it's an hp 320-1190 has (or similar No..). I can't tell you the exact model No. as he is now deceased under repair. I was just informed that the screen is no longer available and so they cannot provide me one to fix the pc. The pc above has a vga / digital Jack on the back? If so, I can almost certainly plug in a new screen to hold it for a little longer. Or, as it is not so much the touch screen, is it possible to replace it with a plastic or glass front?

  Any help much appreciated.

  JohnBoy61.

  Hello

  No, many HP AIO machines don't have VGA port at the back, including your:

  The back of the system

  Figure: Return of the system

• Whenever I start my desktop computer, he goes to the BACK and informed me that my CMOS settings are false.

  Help! It started to happen last week and I don't know what to do. Whenever I start my desktop computer, he goes to the back and informed me that my CMOS settings are false. How should I address this!

  original title: CMOS setting

  It mahy be as simple as needing a new CMOS battery.  If you are not under warranty and have a counter top it is usually fairly easy to replace (google your computer for more information).

  If that doesn't fix it, you may need to reset by removing the battery, unplug the power, remove the dough (if any) and now the power button is for one minute.

• I have a winsock error, so IE won't connect, even though it says I have full signal. If I format the hard drive and reinstall xp it will fix the problem?

  Winsock error

  Hi I have a winsock error, so IE won't connect, even though it says I have full signal. I got the fix for microsoft programs, nothing has worked, if I format the hard drive and reinstall xp it will fix the problem. Thank you

  Hi I have a winsock error, so IE won't connect, even though it says I have full signal. I got the fix for microsoft programs, nothing has worked, if I format the hard drive and reinstall xp it will fix the problem. Thank you

  Check that your antivirus (all-in-one suite If you have one) is not turn off your network traffic.

  Note the devices installed in the machine.  Use this information to download the latest version of the drivers and software for the manufacturer's Web site features (on another machine and store on an external support, I suppose, would be the only way for you to do.)

  Uninstall the software/drivers for network devices.  Turn it back on.  Even if pilots are found/installed automatically, manually update the drivers & software using the files you downloaded earlier.

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Open a command prompt and run the commands following one at a time (after each ENTRY) without leaving the part through if somehting started working...  Note all errors and post them here.

  netsh winsock reset catalog
  ipconfig / renew
  ipconfig/flushdns
  ARP d *.
  nbtstat - RR

• Access to a specific registry key (HKEY_USERS\S-1-5-18\software\Microsoft) causes a BSOD. How can I fix the key?

  Original title: access to a specific registry key generates BSOD. How can I fix the key?

  Scans the registry in XP causes a BSOD. The wrong key is HKEY_USERS\S-1-5-18\software\Microsoft. Access to manually also causes a BSOD so I can't delete or export it. I do not have a restore point from before the problem started. Other than the access to that key or run a search, XP works well.
  Is it possible to fix this?

  Not having no not this error in my notes (in other words, I've not seen at least 2 times), I Googled it and first fell on a MS KB article:

  http://support.Microsoft.com/kb/810558

  This article includes this statement:

  Contact Microsoft Technical Support to help heal the corruption in the registry.

  I think that is where you are right now, so let's see what is the response of the Microsoft Support Engineer, now that there is more information.  I always love to see what they have to offer first.

  Why and how did you change the system restore to create restore Points 3 a day for 30 days (FYI - that is not the same as a backup).

  If you were to solve some problem at the time, what was the question?

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  In the meantime, I would run a chkdsk /r on your volume XP since XP Recovery Console.

  If you are not sure of the SP2 CD you have is an XP bootable installation CD authentic and not some kind of restore CD for the Dell system to 100%, I would recommend this (that I've seen more than 2 times):

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Console of r. used to fix the MBR, now dirve says "New Volume"

  OK, I'm having a big problem.

  I'll start by saying that my computer a few days ago has only been running a configuration to multibooting with linux on a disk and Windows XP on another. Linux using Grub to boot. Now, I recently updated my BIOS and this had caused a problem with GRUB not start XP properly. I decided to remove the Linux disk, simply launch XP as my main drive and physically switch the two when I need to use one or the other.

  Given that I was removing Linux, I had to fix the MBR for Windows would be to start properly. I read online that all I had to do was start using my XP installation disk in the recovery console and doing a FIXMBR and FIXBOOT. I did it, but something went wrong and he said that I had to do a CHKDSK first. So I made "CHKDSK/r" and let stand overnight (this disc is 1. 5 t so it took a while).  So the next day after work I went back to finish the FIXMBR and FIXBOOT. He gave me the same message. Now I know exactly what I did after that, if I tried other commands or what, but I finally decided to just hang up and see what was going on.

  In Linux, I see that the name of volume for my XP disc went from "XP 1. 5 t"to"new Volume ". Not good. Now I see there are two files listed: RECYCLER and System Volume Information. I guess that the disk has been reformatted somehow? Now I'm at the point where I use my XP Backup to another drive of four months ago. I did some research on the recovery partition, file recovery, etc. I came across a program (trial version) that finds deleted files. I installed and run for a few minutes. OK, good news, is that I do not see some of my files and folders, so I guess that the disk was not completely formatted/overwritten.

  I don't know how the player got there where she is now. Maybe I used a bad command or a switch?

  So my question is where to go from here? Should I get a new drive and recover the files on the new disk? Can I restore files and recover the old partition?

  I hope I didn't confuse you too much. I appreciate any help you can give.

  -Jimmy

  Hey Jimmy,

  I personally never heard a user successfully remove the GRUB bootloader without a reinstall of Windows. You have no real solution is to reinstall Windows from the Windows partition is completely empty. I don't know any Linux file recovery tools, you may need to post in a Linux forum for Linux file recovery tools.

  Sorry I don't have a better solution for you!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion m-6 (envy 14): the back takes off

  I've had this laptop for two and 1/2 years now. I really liked its software and the way it was designed, but last year (when I got 18 months) money back panel (IE. The back of the monitor) began to take off. I recorded it down to try and stop spreading but it has continued to spread to the place where it all the background of the Panel is to detach! The whole bottom is led taped down and because what happens offshore, it is starts shooting at plastic hinges and making them pop off some. I never dropped my lap top, whenever I take it places it's still in a case and I've always been very careful with him. I do not understand why this is happening when I have always been so careful with her. The rear panel has been simply pasted on cheaply and came off just when it shouldn't have.

  Emcopp

  Welcome to the Community Forum of HP.

  That's all just sad.

  The laptop is not new at this stage and I don't know if we can do something.

  However, I have sent a request to have someone take a look at your history of distress.

  We will wait for the word.

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• How to fix the toolbar if the bottom of the screen rather than side

  My children will install my toolbar to the right of my screen and I can't bring it back. It is not locked.  More therer are two icons for everything.  I can understand how to fix it.

  Hello

  Do you mean the taskbar at the bottom of the desktop computer or the Internet Explorer toolbar?

  Method 1:
  I suggest you to check if you are able to move the taskbar in the clean boot state.
  http://support.Microsoft.com/kb/929135
  Note: when the diagnostic is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 2:
  I suggest you to run the system restore before the changes.
  You can check the link:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Method 3:

  If the problem persists suggest you check with a new user account because this can happen due to the damaged user account,

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  Note: If the problem does not occur after you create a new user account, and then try the steps in the following article to fix the damaged user account.
  Fix a corrupted user profile:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile