Fixing poor clarity of line, other than vertical and horizantal
Lines that are not horizontal or vertical have a stained look. Is it possible to fix this problem or is it a screen pixel problem?
Thank you
Mike
This looks like a bitmap scaling. If this is the case, use the smoothing of anti-aliasing, bitmap.
Tags: Adobe Animate
Similar Questions
-
Hey after update of OS X El Capitan my laptop is unable to connect to internet via wifi except a few sites as Facebook and Youtube other than that none of the Web sites open on one of the browsers I tried to reinstall it but nothing happened, wifi works fine on all my other devices and internet are functioning normally If I connect to my mac on a LAN Port. Help why this phenomenon happens?
Open System/Network preferences window and click on the Advanced button. In the next window, click on the DNS button and see what is listed as a DNS server.
You can try to use the OpenDNS servers by entering these two addresses:
208.67.222.222
208.67.220.220
Save the changes, restart and relaunched Safari. If you delete these addresses the default address will be back.
-
Sequentially lines Freeze when scrolling (lines other than headers)
I had a table divided into 3 parts. Everyone is starting with line of explanation and I want the raws to pass when I scroll through them.
Basically I want the same thing that you can see on the iPhone when you scroll through Contacts - the initial letter is still on top and when you scroll in another initial letter it switches to the next. You can see in this video:
https://www.YouTube.com/watch?v=eikTReAyXBc
To all, thank you in advance for information.
Not, to my knowledge, a feature available.
To ask for it to be added to the Mac version of numbers:
Launch of numbers
Go (menu) numbers > provide feedback of numbers...
Write a feature request.
Send.
Kind regards
Barry
-
Why I can not dictate in other than WordPad and Notepad word processing applications?
It doesn't seem to be any problem with my camera, because I can dictate into WordPad and Notepad. However, I use EditPad Light as my default text editor, but for a reason that the voice recognition program does not recognize other processor as being capable of speech recognition dictation applications. Speech recognition works very well in Internet explore, because I dictate right now.
I set as my default text editor EditPad Light, so I don't really understand why it cannot be used with speech recognition. What I read in the instructions, the application of speech recognition is supposed to work with any program that can receive text entries. However, I just tested with Microsoft Word, and it does not accept dictated either, for some reason any.
If anyone has a solution for this problem, I would really appreciate knowing how to fix it. WordPad and Notepad, are both good programs, but they have significant limitations, compared to applications such as Microsoft Word, and the application that I use for light editing of text called EditPad. Even if I did have the opportunity to try it, I hope I'll be able to use HTML editors that are part of the Web site software that I dictated.
Comedian Hi 71,
Thank you for visiting the website of Microsoft Windows Vista Community. The question you posted says that the Windows speech recognition program does not work in Microsoft Word, which is related to Microsoft Office, and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the support you want.
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
You can try to install and configure speech recognition and handwriting in Microsoft Word and check if that can solve the problem.
You could try returning to the site of Vista compatibility for more information on whether or not EditPad Light is fully compatible with Vista.
http://www.Microsoft.com/Windows/compatibilityHope it will be useful.
Kind regards
Kadoch - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think. -
replaced with Non-frere unit "and" toner light toner unit does not turn off and the printer will not work. How can I reset?
Hello
Do you use the HL-2270DW printer?
Follow the steps in troubleshooting mentioned in the articles below:
Why can I not print?
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
Print the problem - troubleshooting
If after following the steps of troubleshooting mentioned in the article above the problem persists, I recommend you contact the manufacturer of your printer by clicking on the link
http://www.brother-USA.com/support/custserv.aspx
He hopes to help!
-
I would put my flag 400-434 on the side (so the upward cd player). Fits better on my shelf of the computer. It will work correctly in this way? Thank you!
Hello @rmbnewengland,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I read your post about how you want to place your computer horizontally rather than vertically, and I'd be happy to help you in this case!
You can place your desk horizontally, as long as your system is not equipped with coolant, and that there is no exhaust or contributions being blocked fans.
I hope this helps!
Best regards
-
No Option to install repair - SAD
HelloWhy Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.
I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD. Who, in searching the Web I found is a fairly common problem with Vista. I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it. I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ". Neither of which has helped in my situation. Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP. That beats a little the entire purpose of dual boot.
As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor. I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me. This left me no option but to the completely reinstall Vista. Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system. I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally. I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.
Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation. Even MS Office has a routine repair. Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ". If not, why?
-Todd w.
"Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."
«.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »
As Todd, is the answer."This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.
"I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."
If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers. Windows 7 and IE 8 are currently in beta.
Another possible place you could make suggestions which could see the developers would be:
https://connect.Microsoft.com/default.aspx
Brent
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?
Hi Comintern,
· Did you do changes on the computer before the show?
· You receive an error message or error code?
Follow the suggestions below for a possible solution:
Method 1:
Step 1: Start in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.
Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.
Let us know the results.
-
my Java Script and html do not work correctly in any other browser other than Internet Explorer
original title: my html and Java Script do not work correctly in another browser other than Internet Explorer, which is not the only browser used with Windows. How can I fix it?600 4 6 0 x 80000000000000 15 Windows PowerShell WIN-GRBD073PMKI FunctionHas begunProviderName = Function NewProviderState = SequenceNumber started = 5 HostName = ConsoleHost HostVersion = 2.0 HostId = 9 a 968549-639 a-4de1-9012-5b443edaae11 EngineVersion = RunspaceId = PipelineId = CommandName = CommandType = ScriptName = CommandPath = command line =.Hello
The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.
http://social.msdn.Microsoft.com/forums/en-us/iewebdevelopment/threads
I hope that helps!
-
How to better convert 01:56 and not lose quality other than the 4 K to 2 k
If I take a 4 K produce and convert/low res to 2 k by 2 k, importing in a time line am I lose quality other than the 2 k low res? Is it bad for the film? Does make a difference if the position would give me a 2 k vs file to me? It's a feature and I need lower res that it creates a DCP. so I'm concerned about quality. And is it all still do not lose quality on import and export. It seems that I lose 15GB.
YYou are reducing the resolution, but you're not really lower the quality. There should be no difference between you do it or someone else do it. The file will be much lower in 2K 4 K. It is to be expected.
-
Transparent line on which vertical on the 5th generation, Ipod Touch
I got a second hand 5th generation iPod touch which all worked fine other than to have a line described in the title above. This line is blocking the letters on the keyboard and is quite frustrating if anyone has advice please share!
I suspect a problem with the hardware as a bad screen but you can try:
-Reset the device iOS. Nothing will be lost
Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to
ten seconds, until the Apple logo appears.
-Reset all settings
Go to settings > general > Reset and tap reset all settings.
All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.
-Restore from backup. See:
Restore your device from an iCloud or iTunes backup - Apple Support
-Restore factory settings/new iOS device.
If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.
-
8620 print any materials other than test page
Hi all
Just hung up a 8620 on wireless and everything communicates and the printer test pages work fine. The question cannot print other documents, it goes to the printer says print then does not. It's with anything other than diagnostic pages printed from HP or coil the printer test page.
It shows in the coil and then disappears, never to be printed. I signed up for ink instant is this cause a problem? This shouldn't be something I need to go into windows to repair. I ran the fix HP software that it says that the printer is not yet on the network, but prints the test pages, as is recognized by all programs. Printer is set as default as well printer. May need to return this thing, I need it for my business and my other printer never had these problems. It's instant ink which was interesting for me.
Hi TACFirearms,
Welcome to the Forums of HP Support! I see your will HP Officejet 8620 does not print it goes to the spooler and then stops, I would like to return to the top and print, but require a bit more information:
1 it IS all programs or a certain?
2. What is your current version of the Windows operating system?
3 have you tried to plug in a USB key?
4. do you get an error message when you try to print?
If you have a Windows operating system later than XP, please start here: HP print and Scan Doctor- it was designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.
Please let me know what the PSDR find, I'll watch for your reply.
Thank you
-
Notepad the length of the line more than 125 charater are not addressed
Hi Experts,
My Office notebook do not welcome the more than 125 charater line length.
OS - Windows XP Professional version 2002 pack 3 service.
I noticed in the other office aimed at the length of line more than 125 characters, OS service pack even version.
Please me tips
Thank you and best regards,
Thiru.
Hello Thiru_24,
In addition to theunpredictable comment, I added a link below with the information regarding the notebook. I hope this helps.
Notebook: FAQ
http://Windows.Microsoft.com/en-us/Windows7/Notepad-frequently-asked-questions
Thank you
James
-
My laptop does not start at the top. It indicates that the following file is missing or damaged WINDOWS\SYSTEM32\CONFIG\SYSTEM.
Download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.
See if anything here helps-
How to recover a corrupted registry that prevents Windows XP startup
http://support.Microsoft.com/kb/307545Install and use the Recovery Console in Windows XP
http://support.Microsoft.com/kb/307654See also
How to Troubleshoot Registry Corruption issues
http://support.Microsoft.com/kb/822705How to fix a missing or corrupt Windows\System32\Config\System file
http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htmTaurArian [MVP] 2005-2010 - Update Services
-
When I right click Start button select Explorer, I can decide what folder is open other than the start menu and dozens of file extensions?
Can we just my computer with the list of drives?
thanx
Hello
I suggest you to follow these steps and check if that helps:
a. right click on the Windows Explorer icon
b. in the menu that appears, click Properties.
c. in the target box, add the command line switch ' / root ' to the "% SystemRoot%\Explorer.exe" command, using the startup location that you want.
d. for example, if you want Explorer of Windows to start at the root of drive C, edit the command as follows:
% SystemRoot%\explorer.exe/root, C:\It will be useful.
Maybe you are looking for
-
iOS 5.1.1 not connect to itunes
I have an iPad 1st gen 5.1.1 running. I have an application that is supported on 5.1.1 that I would like to update. I can't connect to the app store. Everything works fine on an iPad 2 I.
-
I have a a deskjet 1010 which runs on windows like 8.1.I also work on my other lkaptop with windows 10 ive installed, but it does not print any ideas
-
Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no d the sounds I made a windows update, but no sound came through it please please help with a link to something. Re, I did check the drive for
-
Broken in HP Photosmart C5280 plastic gears
I have a problem with my beloved printer) HP Photosmart C5280 broken part (10 + PC GF) and specifically small plastic gear.In this part got 3 speed, while broke which is in the middle and attached to a metal rod.Where can I find these pieces, or you
-
Why I can't not emotion pictures on my msn messenger?
Original title: photos of msn emotion is not available why I can't not emotion pictures on my msn messenger... I only have the keyboard version